SEARCH · Engineering Papers

Results for “electronic conductivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

All sources NASA NTRS DOE OSTI

DOE OSTI2024

Progress on the normal conducting magnets for the Electron-Ion Collider

The electron-ion collider (EIC) at Brookhaven National Laboratory (BNL) is designed to deliver a peak luminosity of 1e+34 1/cm2 1/sec. The EIC will take advantage of the existing Relativistic Heavy Ion Collider (RHIC) facility. Two additional rings will be installed: an electron storage ring (ESR) and a rapid cycling electron synchrotron ring (RCS).This paper presents an update on the normal conducting magnet designs required for both the ESR and RCS rings. The ESR will store polarized electron beams up to 18 GeV and utilizes a triplet of dipole magnets to increase the emittance at 5 GeV and generate excess bending to create additional radiation damping to allow a larger beam-beam tune shift. The RCS will accelerate single bunches of spin-polarized electrons at various energies from 5 GeV to 18 GeV, with a ramp rate of 100 ms and 1 Hz repetition rate. Both rings require dipole, quadrupole and sextupole magnets with different specifications.

43 PARTICLE ACCELERATORS↗

DOE OSTI2020

Rational Designed Mixed-Conductive Sulfur Cathodes for All-Solid-State Lithium Batteries

All-solid-state lithium–sulfur batteries (ASSLSBs) hold great promise for safe and high-energy-density energy storage. However, developing high-performance sulfur cathodes has been proven difficult due to low electronic and ionic conductivities and large volume change of sulfur during charge and discharge. Here, we reported an approach to synthesize sulfur cathodes with a mixed electronic and ionic conductivity by infiltrating a solution consisting of Li 3 PS 4 (LPS) solid electrolyte and S active material into a mesoporous carbon (CMK-3). This approach leads to a uniform dispersion of amorphous Li 3 PS 7 (L 3 PS) catholyte in an electronically conductive carbon matrix, enabling high and balanced electronic/ionic conductivities in the cathode composite. The inherent porous structure of CMK-3 also helps to accommodate the strain/stress generated during the expansion and shrinkage of the active material. In sulfide-based all-solid-state batteries with Li metal as the anode, this cathode composite delivered a high capacity of 1025 mAh g –1 after 50 cycles at 60 °C at 1/8C. This work highlights the important role of high and balanced electronic and ionic conductivities in developing high-performance sulfur cathodes for ASSLSBs.

25 ENERGY STORAGE↗

DOE OSTI2021

Redox active polymer devices and methods of using and manufacturing the same

The disclosed technology relates generally to apparatus comprising conductive polymers and more particularly to tag and tag devices comprising a redox-active polymer film, and method of using and manufacturing the same. In one aspect, an apparatus includes a substrate and a conductive structure formed on the substrate which includes a layer of redox-active polymer film having mobile ions and electrons. The conductive structure further includes a first terminal and a second terminal configured to receive an electrical signal therebetween, where the layer of redox-active polymer is configured to conduct an electrical current generated by the mobile ions and the electrons in response to the electrical signal. The apparatus additionally includes a detection circuit operatively coupled to the conductive structure and configured to detect the electrical current flowing through the conductive structure.

Johnson, Paul B.↗

DOE OSTI2021

Redox active polymer devices and methods of using and manufacturing the same

The disclosed technology relates generally to apparatuses comprising conductive polymers and more particularly to tags and tag devices comprising a redox-active polymer film, and methods of using and manufacturing the same. In one aspect, an apparatus includes a substrate and a conductive structure formed on the substrate which includes a layer of redox-active polymer film having mobile ions and electrons. The conductive structure further includes a first terminal and a second terminal configured to receive an electrical signal therebetween, where the layer of redox-active polymer is configured to conduct an electrical current generated by the mobile ions and the electrons in response to the electrical signal. The apparatus additionally includes a detection circuit operatively coupled to the conductive structure and configured to detect the electrical current flowing through the conductive structure.

Friesen, Cody A.↗

DOE OSTI2022

Redox active polymer devices and methods of using and manufacturing the same

Johnson, Paul B.↗

DOE OSTI2024

Comparison of hardening and microstructures of ferritic/martensitic steels irradiated with fast neutrons and dual ions

Ferritic/martensitic steels T91 and HT9 were irradiated with neutrons (BOR-60 reactor) and dual ions (9 MeV Fe 3+ and 3.42 MeV energy degraded He 2+ ) from 369 to 520 °C and damage levels of 16.6 to 72 dpa to quantify the possibility of using ion irradiation to simulate neutron irradiation in terms of microstructures and mechanical properties. Nanoindentation testing was performed to obtain the bulk equivalent hardness of the dual-ion irradiated samples. For the neutron irradiated samples, both nanoindentation and Vickers hardness testing were conducted. Transmission Electron Microscopy (TEM) characterizations of the cavities, dislocation loops and precipitates were conducted to account for the strengthening contribution of each microstructure element. The good agreement between the microstructure-predicted (dispersed barrier hardening) and measured strength of the irradiated specimens demonstrated the accuracy of the strengthening model and the nanoindentation tests. Furthermore, the comparison of mechanical property and microstructure changes in ion and neutron irradiated structural materials indicated that ion irradiation replicated many neutron irradiation features. However, a single 70 °C temperature shift is insufficient to match all complex microstructures of neutron vs. ion irradiation over the irradiation temperature range of 369–520 °C.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Understanding and Manipulating Counterion Condensation within Charged Polymer Electrolytes for Selective and Low Resistant Membrane Separations

Polymeric ion-exchange membranes are found at the heart of numerous electrochemical systems spanning separations (electrodialysis and membrane capacitive deionization) and energy conversion and storage (flow batteries, fuel cells, and electrolyzers). The ion-exchange membrane separators need to be ion conducting but electron insulating, and in many scenarios selective for a particular ion to conduct. Because of their polymeric nature, the molecular architectures of ion-exchange membranes lack the molecular precision found in many inorganic materials. Plus, they contain numerous structural defects that impede ionic transport. As a result of their poor structure, it has been difficult to carefully probe the underlying physics that governs ion transport in ion-exchange membranes. We investigated counterion condensation phenomena in ion-exchange membranes and correlated it to bulk ionic charge transport and selectivity in precisely defined and long-range ordered materials afforded through the principles of directed self-assembly. A multi-faceted approach spanning i.) advanced metrology, two-dimensional atomic force microscopy, x-ray scattering, and ion-exchange equilibria, and ii.) molecular simulations (classical molecular dynamics and ab-inito molecular dynamics) that bridge multiple time and length scales, were employed to correlate the extent of counterion condensation to ionic conductivity and selectivity. After uncovering the extent of the condensation phenomena in this project, new macromolecular chemistries were employed to manipulate the ion pairing interactions of the condensed counterions to tethered ions on the polymer backbone so more facile and selective conduction rates can be attained. The research has aided in the rational design of polymeric ion-exchange membrane separators with high current density for electrochemical systems and subsequently better energy efficiency.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Dichlorinated Dithienylethene-Based Copolymers for Air-Stable n-Type Conductivity and Thermoelectricity

Here, two donor-acceptor polymers were obtained by coupling difluoro- and dichloro-substituted forms of the electron-deficient unit BDOPV and the relatively weak donor moiety dichlorodithienylethene (ClTVT). The conductivity and power factors of doped devices are different for the chlorinated and fluorinated BDOPV polymers. High electron conductivity of 38.3 and 16.1 S cm -1 were obtained from the chlorinated and fluorinated polymers with N-DMBI, respectively, and 12.4 and 2.4 S cm -1 were obtained from the chlorinated and fluorinated polymers with CoCp 2 , respectively, from drop-cast devices. The corresponding power factors are 22.7, 7.6, 39.5 and 8.0 μW m -1 K -2 , respectively. Doping of PClClTVT with N-DMBI results in excellent air-stability; the electron conductivity of devices with 50 mol% N-DMBI as dopant remained up to 4.9 S m -1 after 222 days in the air, the longest for an n-doped polymer stored in air, with a thermoelectric power factor of 9.3 μW m -1 K -2 . However, the conductivity of PFClTVT-based devices can hardly be measured after 103 days. These observations are consistent with morphologies determined by grazing incidence wide angle X-ray scattering (GIWAXS) and atomic force microscopy (AFM). The results demonstrate that chemical structures leading to dense and ordered packing can enhance electron conductivity and air stability of n-type donor-acceptor polymers.

30 DIRECT ENERGY CONVERSION↗

DOE OSTI2024

Physical origin of enhanced electrical conduction in aluminum-graphene composites

In this study, the electronic and transport properties of aluminum-graphene composite materials were investigated using the ab initio plane wave density functional theory. The interfacial structure is reported for several configurations. In some cases, the face-centered aluminum (111) surface relaxes in a nearly ideal registry with graphene, resulting in a remarkably continuous interface structure. The Kubo–Greenwood formula and space-projected conductivity were employed to study electronic conduction in aluminum single- and double-layer graphene-aluminum composite models. The electronic density of states at the Fermi level is enhanced by the graphene for certain aluminum–graphene interfaces, thus improving electronic conductivity. In double-layer graphene composites, conductivity varies non-monotonically with temperature, showing an increase between 300 and 400 K at short aluminum-graphene distances, unlike the consistent decrease in single-layer composites.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Imaging Secondary Electron Emission from a Single Atomic Layer

Graphene-based devices hold promise for a wide range of technological applications. Yet characterizing the structure and the electrical properties of a material that is only one atomic layer thick still poses technical challenges. Recent investigations indicate that secondary-electron electron-beam-induced current (SE-EBIC) imaging can reveal subtle details regarding electrical conductivity and electron transport with high spatial resolution. Here, it is shown that the SEEBIC imaging mode can be used to detect suspended single layers of graphene and distinguish between different numbers of layers. Pristine and contaminated areas of graphene are also compared to show that pristine graphene exhibits a substantially lower SE yield than contaminated regions. In conclusion, this SEEBIC imaging mode may provide valuable information for the engineering of surface coatings where SE yield is a priority.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Large Polarons as Key Quasiparticles in SrTiO 3 and SrTiO 3 -Based Heterostructures

Despite its simple structure and low degree of electronic correlation, SrTiO 3 (STO) features collective phenomena linked to charge transport and, ultimately, superconductivity, that are not yet fully explained. Thus, a better insight into the nature of the quasiparticles shaping the electronic and conduction properties of STO is needed. We studied the low-energy excitations of bulk STO and of the LaAlO 3 / SrTiO 3 two-dimensional electron gas (2DEG) by Ti L 3 edge resonant inelastic x-ray scattering. In all samples, we find the hallmark of polarons in the form of intense d d + phonon excitations, and a decrease of the LO3-mode electron-phonon coupling when going from insulating to highly conducting STO single crystals and heterostructures. Overall, both results are attributed to the dynamic screening of the large polaron self-induced polarization, showing that the low-temperature physics of STO and STO-based 2DEGs is dominated by large polaron quasiparticles.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2020

n–Doping of a Low–Electron–Affinity Polymer Used as an Electron–Transport Layer in Organic Light–Emitting Diodes

n-Doping electron-transport layers (ETLs) increases their conductivity and improves electron injection into organic light-emitting diodes (OLEDs). Because of the low electron affinity and large bandgaps of ETLs used in green and blue OLEDs, n-doping has been notoriously more difficult for these materials. In this work, n-doping of the polymer poly[(9,9-dioctylfluorene-2,7-diyl)-alt-(benzo[2,1,3]thiadiazol-4,7-diyl)] (F8BT) is demonstrated via solution processing, using the air-stable n-dopant (pentamethylcyclopentadienyl)(1,3,5-trimethylbenzene)ruthenium dimer [RuCp*Mes] 2 . Undoped and doped F8BT films are characterized using ultraviolet and inverse photoelectron spectroscopy. The ionization energy and electron affinity of the undoped F8BT are found to be 5.8 and 2.8 eV, respectively. Upon doping F8BT with [RuCp*Mes] 2 , the Fermi level shifts to within 0.25 eV of the F8BT lowest unoccupied molecular orbital, which is indicative of n-doping. Conductivity measurements reveal a four orders of magnitude increase in the conductivity upon doping and irradiation with ultraviolet light. Here, the [RuCp*Mes] 2 -doped F8BT films are incorporated as an ETL into phosphorescent green OLEDs, and the luminance is improved by three orders of magnitude when compared to identical devices with an undoped F8BT ETL.

36 MATERIALS SCIENCE↗

DOE OSTI2025

A predictive analytical model of electrical transport in multi-principal-element alloys

A predictive analytical model is presented for the electrical conductivity of multi-principal-element alloys (MPEAs), including those containing aluminum, transition metals, and refractory metals. Given that the lattice parameter of the Wigner-Seitz cell of an MPEA is similarly variable to a bulk metallic glass, it is postulated that electron scattering can be approximated by a series of two-level systems. Here, the resulting reduced-order model enabled an accurate determination of electrical resistivity and electron thermal conductivity based on the scattering of electrons in a two-level system across a Bloch-potential-based virtual crystal approximation. Model results are compared to experimental four-point probe electrical resistivity measurements between 300 K and 700 K for Al 0.3 CoCrCuFeNi, CoCrFeMnNi, (CoCrFeMnNi) 0.98 W 0.02 , (CoCrFeMnNi) 0.95 W 0.05 , and Nb 4 Ta 4 V 3 Ti, for model validation.

Analytical model↗

DOE OSTI2025

Contorted acene ribbons for stable and ultrasensitive neural probes

Organic materials that conduct both electrons and ions are integral to implantable bioelectronics because of their conformable nature. There is a dearth of these materials that are highly sensitive to cations, which are the majority ions on the surface of neurons. This manuscript offers a solution using an extended ribbon structure that is defect-free, providing high electronic mobility along its fused backbone, while the edge structure of these ribbons promotes high ionic conductivity. We incorporated these mixed ion/electron conductors into neural probes and implanted them in a rodent brain where they offer a suite of useful properties: high cation sensitivity, stability over several weeks after implantation, and biocompatibility. These materials represent an innovative class of implantable biosensors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Observation of a highly conductive warm dense state of water with ultrafast pump–probe free-electron-laser measurements

The electrical conductivity of water under extreme temperatures and densities plays a central role in modeling planetary magnetic fields. Experimental data are vital to test theories of high-energy-density water and assess the possible development and presence of extraterrestrial life. These states are also important in biology and chemistry studies when specimens in water are confined and excited using ultrafast optical or free-electron lasers (FELs). Here we utilize femtosecond optical lasers to measure the transient reflection and transmission of ultrathin water sheet samples uniformly heated by a 13.6 nm FEL approaching a highly conducting state at electron temperatures exceeding 20 000 K. The experiment probes the trajectory of water through the high-energy-density phase space and provides insights into changes in the index of refraction, charge carrier densities, and AC electrical conductivity at optical frequencies. At excitation energy densities exceeding 10 MJ/kg, the index of refraction falls to n = 0.7, and the thermally excited free-carrier density reaches ne = 5 × 1027 m−3, which is over an order of magnitude higher than that of the electron carriers produced by direct photoionization. Significant specular reflection is observed owing to critical electron density shielding of electromagnetic waves. The measured optical conductivity reaches 2 × 104 S/m, a value that is one to two orders of magnitude lower than those of simple metals in a liquid state. At electron temperatures below 15 000 K, the experimental results agree well with the theoretical calculations using density-functional theory/molecular-dynamics simulations. With increasing temperature, the electron density increases and the system approaches a Fermi distribution. In this regime, the conductivities agree better with predictions from the Ziman theory of liquid metals.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2022

Enhanced Electron Correlation and Significantly Suppressed Thermal Conductivity in Dirac Nodal-Line Metal Nanowires by Chemical Doping

Enhancing electron correlation in a weakly interacting topological system has great potential to promote correlated topological states of matter with extraordinary quantum properties. Here, the enhancement of electron correlation in a prototypical topological metal, namely iridium dioxide (IrO 2 ), via doping with 3d transition metal vanadium is demonstrated. Single-crystalline vanadium-doped IrO 2 nanowires are synthesized through chemical vapor deposition where the nanowire yield and morphology are improved by creating rough surfaces on substrates. Vanadium doping leads to a dramatic decrease in Raman intensity without notable peak broadening, signifying the enhancement of electron correlation. The enhanced electron correlation is further evidenced by transport studies where the electrical resistivity is greatly increased and follows an unusual $\sqrt{T}$ dependence on the temperature (T). The lattice thermal conductivity is suppressed by an order of magnitude via doping even at room temperature where phonon-impurity scattering becomes less important. Density functional theory calculations suggest that the remarkable reduction of thermal conductivity arises from the complex phonon dispersion and reduced energy gap between phonon branches, which greatly enhances phase space for phonon–phonon Umklapp scattering. This work demonstrates a unique system combining 3d and 5d transition metals in isostructural materials to enrich the system with various types of interactions.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Electronic Structure of Excitons in Hematite Fe 2 O 3

We present a computational study of the electronic structure of excitons in hematite Fe 2 O 3 using density functional theory (DFT) and time-dependent DFT theory. Excitons resulting from solar light absorption are precursors to photogenerated charge carriers, which are the active species in solar-to-fuel redox conversions. Upon vertical excitation, the lowest energy exciton is found to have a multideterminantal wave function, describing an electron excited from O 2p states to Fe 3d states of the nearest basal plane, possibly supporting a recent XUV-derived exciton structure with a radius of a single Fe–O bond. Subsequently, the exciton self-traps into stable electron–hole pair structures whose wave functions are well-approximated by single excitations conveniently labeled “HOMO–LUMO”. Self-trapping yields electron–hole pair structures whereby the electron state (electron polaron-like) is separated from the hole state (hole polaron-like) by 3, 5, 7, 9, ... basal planes in structures referred to as Exc-3, Exc-5, Exc-7, Exc-9, ... The natural transition orbitals (electron–hole states) exhibit a strong “localized” character. The hole state is best described as a (FeO 6 ) + octahedral moiety carrying ~0.65 h + charge, and overall ~70% of the hole is assigned to O 2p atomic states, mostly on the four (4) equatorial O atoms of the moiety. The electron state is best described as a (FeFe) – moiety carrying ~0.80 e – charge in Fe 3d atomic states. The lattice distortions around the hole site exhibit Fe–O bond shortening due to the removal of electron density from an orbital state with O–Fe–O antibonding character. The electron site shows Fe–Fe distance shortening due to excess electron density added to an orbital state with in-phase Fe–Fe interactions. Furthermore, these excitonic structures with increasing electron–hole separation can be viewed as the onset of exciton separation into isolated electrons and hole polarons.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Isotope dependence of transport in ST40 hot ion mode plasmas

The ST40 compact, high-field spherical tokamak, operating at 2.1 T and with 1.8 MW of neutral beam heating, achieved central carbon impurity ion temperatures in excess of 10 keV, surpassing their business milestone of 100 M °C (8.6 keV). The high temperature discharges were in the hot ion mode, with $T_i \gg T_e$, and they were achieved in both hydrogen and deuterium plasmas with deuterium neutral beam injection. In order to achieve the high temperature scenarios, careful wall conditioning and scenario optimization was carried out in $H^0 \rightarrow H^+$, $D^0 \rightarrow H^+$, and finally in $D^0 \rightarrow D^+$ plasmas. The TRANSP transport code was employed to study the dependence of confinement and transport on isotopic mass, and the conditions that led to the high measured central ion temperatures in the $D^0 \rightarrow H^+$ and $D^0 \rightarrow D^+$ plasmas. The kinetic profiles input into TRANSP were inferred from line-of-sight and limited radial measurements as well as consistency with a number of other experimental constraints. The TRANSP results first showed that the main species central ion temperature was only 0.5–1 keV lower than the measured carbon impurity temperature, and thus in the high performance plasmas also surpassed the 100 M °C level. TRANSP also showed that while the electron thermal conduction loss was dominant, reductions in central ion transport, and an effective decoupling of the ions from the electrons, led to an increase in central ion temperatures with increasing plasma mass. In fact, the associated confinement times exhibited a strong dependence on the isotopic mass of the thermal plasma. These preliminary results are foundations for dedicated experiments with full kinetic profile measurements on ST40 in the next run campaign.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗