Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electronic band structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Three-dimensional higher-order saddle-point-induced flatbands in Co-based kagome metals

The saddle point (Van Hove singularity) exhibits a divergent density of states in two-dimensional systems, leading to fascinating phenomena such as strong correlations and unconventional superconductivity, yet it is seldom observed in three-dimensional (3D) systems. In this work we find two types of 3D higher-order saddle points (HOSPs) in emerging 3D kagome metals YbCo 6⁢ Ge 6 and MgCo 6 ⁢Ge 6 . Both HOSPs exhibit a singularity in their density of states, which is significantly enhanced compared to the ordinary saddle point. The HOSP near the Fermi energy generates a flatband extending a large area in the Brillouin zone, potentially amplifying the correlation effect and fostering electronic instabilities. Two types of HOSPs exhibit distinct robustness upon element substitution and lattice distortions in these kagome compounds. Our work paves the way for engineering exotic band structures, such as saddle points and flatbands, and exploring interesting phenomena in Co-based kagome materials.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Ultralow Thermal Conductivity, Multiband Electronic Structure and High Thermoelectric Figure of Merit in TlCuSe

The entanglement of lattice thermal conductivity, electrical conductivity, and Seebeck coefficient complicates the process of optimizing thermoelectric performance in most thermoelectric materials. Semiconductors with ultralow lattice thermal conductivities and high power factors at the same time are scarce but fundamentally interesting and practically important for energy conversion. In this work, an intrinsic p-type semiconductor TlCuSe that has an intrinsically ultralow thermal conductivity (0.25 W m -1 K -1 ), a high power factor (11.6 μ W cm -1 K -2 ), and a high figure of merit, ZT (1.9) at 643 K is described. The weak chemical bonds, originating from the filled antibonding orbitals p-d* within the edge-sharing CuSe 4 tetrahedra and long Tl-Se bonds in the PbClF-type structure, in conjunction with the large atomic mass of Tl lead to an ultralow sound velocity. Strong anharmonicity, coming from Tl + lone-pair electrons, boosts phonon-phonon scattering rates and further suppresses lattice thermal conductivity. The multiband character of the valence band structure contributing to power factor enhancement benefits from the lone-pair electrons of Tl + as well, which modify the orbital character of the valence bands, and pushes the valence band maximum off the Gamma-point, increasing the band degeneracy. The results provide new insight on the rational design of thermoelectric materials.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Transitional Structures with Continuous Variations in Atomic Positions from Anatase to Rutile Improve Photocatalytic Activity

Abstract TiO 2 polymorphs have distinct properties that are widely employed in various applications. However, mechanisms of transformations between these polymorphs are not fully understood, especially at atomic scale, inhibiting advancing the design and application of the transitional phases. Here, based on results from semi‐in situ transmission electron microscopy, density functional theory, and X‐ray photoemission experiments, a physical picture of transitional structures is discovered, in which continuous variations in atomic positions form along a previously unreported anatase‐to‐rutile phase transformation path of [010] A –to–[] R and (004) A –to– (011) R . These gradient structures give rise to continuous band bending, which promotes electron‐hole separation and inhibits their recombination across the bulk of the particles, leading to a large functionally active volume fraction and resulting in high photoactivity. These findings suggest that interphase matter based on extended gradient structures can be designed to advance new functions not achievable using abrupt interfaces.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Uncovering electronic and geometric descriptors of chemical activity for metal alloys and oxides using unsupervised machine learning

Here, we show that unsupervised machine learning (ML) using principal component analysis (PCA) provides a straightforward pathway for developing accurate and interpretable electronic-structure descriptors of the chemical and catalytic properties of materials. We demonstrate the approach by finding chemisorption descriptors for metal alloys and surface oxygens on metals and metal oxides. In both cases, the principal component (PC) descriptors yield ML models that predict the material’s chemical properties with competitive accuracy compared to ML models built using established descriptors. Importantly, interpreting the electronic-structure patterns captured by each PC descriptor via signal reconstruction suggests potential design motifs for future electronic-structure descriptor design and allows us to identify links between a material’s geometric and catalytic properties. Ultimately, we show that the unsupervised ML approach provides a route to find electronic-structure descriptors of the catalytic properties of materials that readily connect to geometric structure and composition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Density-Functional Tight-Binding Parameters for Bulk Zirconium: A Case Study for Repulsive Potentials

Density-functional tight-binding (DFTB) parameters are presented for the simulation of the bulk phases of zirconium. Electronic parameters were obtained using a band structure fitting strategy, while two-center repulsive potentials were created by particle swarm optimization. As objective functions for the repulsive potential fitting, we employed the Birch–Murnaghan equations of state for hexagonal close-packed (HCP), body-centered cubic (BCC) and ω phases of Zr from density-functional theory (DFT). When fractional atomic coordinates are not allowed to change in the generation of the equation-of-state curves, long-range repulsive DFTB potentials are able to almost perfectly reproduce equilibrium structures, relative DFT energies of the bulk phases, and bulk moduli. However, the same potentials lead to artifacts in the DFTB potential energy surfaces when atom positions in the unit cell are allowed to fully relax during the change of unit cell parameters. Finally, conventional short-range repulsive DFTB potentials, while inferior in their ability to reproduce DFT bulk energetics, are able to correctly reproduce the qualitative shape of the DFT potential energy surfaces, including the location of global minima, and can therefore be considered more transferable.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Unveiling the orbital texture of 1T-TiTe 2 using intrinsic linear dichroism in multidimensional photoemission spectroscopy

The momentum-dependent orbital character in crystalline solids, referred to as orbital texture, is of capital importance in the emergence of symmetry-broken collective phases, such as charge density waves as well as superconducting and topological states of matter. By performing extreme ultraviolet multidimensional angle-resolved photoemission spectroscopy for two different crystal orientations linked to each other by mirror symmetry, we isolate and identify the role of orbital texture in photoemission from the transition metal dichalcogenide 1T-TiTe 2 . By comparing our experimental results with theoretical calculations based on both a quantitative one-step model of photoemission and an intuitive tight-binding model, we unambiguously demonstrate the link between the momentum-dependent orbital orientation and the emergence of strong intrinsic linear dichroism in the photoelectron angular distributions. Our results represent an important step towards going beyond band structure (eigenvalues) mapping and learning about electronic wavefunction and orbital texture of solids by exploiting matrix element effects in photoemission spectroscopy.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Investigation of N2 adsorption on Fe3O4(001) using ambient pressure X-ray photoelectron spectroscopy and density functional theory

Reactions on iron oxide surfaces are prevalent in various chemical processes from heterogeneous catalysts to minerals. Nitrogen (N2) is known to dissociate on iron surfaces, a precursor for ammonia production in the Haber–Bosch process, where the dissociation of N2 is the limiting step in the reaction under equilibrium conditions. However, little is known about N2 adsorption on other iron-based materials, such as iron oxide surfaces that are ubiquitous in soils, steel pipelines, and other industrial materials. An atomistic description is reported for the binding of N2 on the Fe3O4(001) surface using first principles calculations with ambient pressure X-ray photoelectron spectroscopy. Two primary adsorption sites are experimentally identified from N2 dissociation on Fe3O4(001). The electronic signatures associated with the valence band region unambiguously show how the electronic structure of magnetite transforms near ambient pressures due to the binding of atomic nitrogen to different surface sites. Overall, the experimental and theoretical results of our study bridge the gap between ultra-high vacuum studies and reaction conditions to provide insight into other nitrogen-based chemistry on iron oxide surfaces that impact the agriculture and energy industries.

Degaga, Gemechis D. (ORCID:0000000205097118)↗
DOE OSTI2022

Damped Dirac magnon in the metallic kagome antiferromagnet FeSn

The kagome lattice is a fertile platform to explore topological excitations with both Fermi-Dirac and Bose-Einstein statistics. While relativistic Dirac fermions and flat bands have been discovered in the electronic structure of kagome metals, the spin excitations have received less attention. Here, we report inelastic neutron scattering studies of the prototypical kagome magnetic metal FeSn. The spectra display well-defined spin waves extending to 120 meV. Above this energy, the spin waves become progressively broadened, reflecting interactions with the Stoner continuum. Using linear spin-wave theory, we determine an effective spin Hamiltonian that reproduces the measured dispersion. This analysis indicates that the Dirac magnon at the K point remarkably occurs on the brink of a region where well-defined spin waves become unobservable. Furthermore, our results emphasize the influential role of itinerant carriers on the topological spin excitations of metallic kagome magnets.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Charge Density Waves and Electronic Properties of Superconducting Kagome Metals

We report that kagome metals AV 3 Sb 5 (A = K, Rb, and Cs) exhibit intriguing superconductivity below 0.9 ~ 2.5 K, a charge density wave (CDW) transition around 80 ~ 100 K, and $\mathbb{Z}$ 2 topological surface states. The nature of the CDW phase and its relation to superconductivity remains elusive. In this work, we investigate the electronic and structural properties of CDW by first-principles calculations. We reveal an inverse Star of David deformation as the 2 x 2 x 2 CDW ground state of the kagome lattice. The kagome lattice shows softening breathing-phonon modes, indicating the structural instability. However, electrons play an essential role in the CDW transition via Fermi surface nesting and van Hove singularity. The inverse Star of David structure agrees with recent experiments by scanning tunneling microscopy (STM). The CDW phase inherits the nontrivial $\mathbb{Z}$ 2 -type topological band structure. Further, we find that the electron-phonon coupling is too weak to account for the superconductivity T c in all three materials. It implies the existence of unconventional pairing of these kagome metals. Our results provide essential knowledge toward understanding the superconductivity and topology in kagome metals.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Effects of magnetic and non-magnetic doping on the vortex lattice in MgB 2

Using small-angle neutron scattering we have studied the vortex lattice in superconducting MgB 2 , doped with either manganese or carbon to achieve a similar suppression of the critical temperature. Measurements were performed with the magnetic field applied along the c-axis, where the vortex lattice in pure MgB 2 is known to undergo a field-and temperature-driven 30° rotation transition. For Mn-doping, the vortex lat- tice phase diagram remains qualitatively similar to that of pure MgB 2 , indicating only a modest effect on the vortex-vortex interaction. In contrast, the vortex lattice rotation transition is completely suppressed in the C-doped case, likely due to a change in the electronic structure which affects the two-band/two-gap nature of superconductivity in MgB 2 . The vortex lattice longitudinal correlation length shows the opposite behavior, remaining roughly unchanged between pure and C-doped MgB 2 while it is significantly reduced in the Mn-doped case. However, the extensive vortex lattice metastability and related activated behavior, observed in conjunction with the vortex lattice transition in pure MgB 2 , is also seen in the Mn doped sample. This shows that the vortex lattice disordering is not associated with a substantially increased vortex pinning.

36 MATERIALS SCIENCE↗
NASA NTRS2011

Ab initio Computations of the Electronic, Mechanical, and Thermal Properties of Ultra High Temperature Ceramics (UHTC) ZrB2 and HfB2

Refractory materials such as metallic borides, often considered as ultra high temperature ceramics (UHTC), are characterized by high melting point, high hardness, and good chemical inertness. These materials have many applications which require high temperature materials that can operate with no or limited oxidation. Ab initio, first principles methods are the most accurate modeling approaches available and represent a parameter free description of the material based on the quantum mechanical equations. Using these methods, many of the intrinsic properties of these material can be obtained. We performed ab initio calculations based on density functional theory for the UHTC materials ZrB2 and HfB2. Computational results are presented for structural information (lattice constants, bond lengths, etc), electronic structure (bonding motifs, densities of states, band structure, etc), thermal quantities (phonon spectra, phonon densities of states, specific heat), as well as information about point defects such as vacancy and antisite formation energies.

Lawson, John W.↗
DOE OSTI2022

Structural Amorphization-Induced Topological Order

Electronic properties of crystals are inherently pertained to crystalline symmetry, so that amorphization that lowers and breaks symmetry is detrimental. One important crystalline property is electron band topology which is known to be weakened and destroyed by structural disorder. Here, we report a counterintuitive theoretical discovery that atomic structural disorder by amorphization can in fact induce electronic order of topology in an otherwise topologically trivial crystal. The resulting nontrivial topology is characterized by a nonzero spin Bott index, associated with robust topological edge states and quantized conductance. Further, the underlying topological phase transition (TPT) from a trivial crystal to a topological amorphous is analyzed by mapping out a phase diagram in the degree of structural disorder using an effective medium theory. The atomic disorder is revealed to induce topological order by renormalizing the spectral gap toward nontriviality near the phase boundary. As a concrete example, we further show such TPT in amorphous stanane by first-principles calculations. Our findings point to possible observation of an electronic ordering transition accompanied by a structural disorder transition.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Substrate-Dependent Band Structures in Trilayer Graphene / h - BN Heterostructures

The tight-binding model has been spectacularly successful in elucidating the electronic and optical properties of a vast number of materials. Within the tight-binding model, the hopping parameters that determine much of the band structure are often taken as constants. Here, using ABA-stacked trilayer graphene as the model system, we show that, contrary to conventional wisdom, the hopping parameters and therefore band structures are not constants, but are systematically variable depending on their relative alignment angle between h-BN. Moreover, the addition or removal of the h-BN substrate results in an inversion of the K and K' valley in trilayer graphene’s lowest Landau level. Our work illustrates the oft-ignored and rather surprising impact of the substrates on band structures of 2D materials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Probing the Electronic Band Gap of Solid Hydrogen by Inelastic X-Ray Scattering up to 90 GPa

Metallization of hydrogen as a key problem in modern physics is the pressure-induced evolution of the hydrogen electronic band from a wide-gap insulator to a closed gap metal. However, due to its remarkably high energy, the electronic band gap of insulating hydrogen has never before been directly observed under pressure. Using high-brilliance, high-energy synchrotron radiation, we developed an inelastic x-ray probe to yield the hydrogen electronic band information in situ under high pressures in a diamond-anvil cell. Here, the dynamic structure factor of hydrogen was measured over a large energy range of 45 eV. The electronic band gap was found to decrease linearly from 10.9 to 6.57 eV, with an 8.6 times densification (ρ/ρ 0 ~ 8.6 ) from zero pressure up to 90 GPa.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Quantum stabilization and flat hydrogen-based bands of nitrogen-doped lutetium hydride

We explore the electronic and structural properties of Lu-H-N structures with specific N,H ordering due to their remarkably narrow hydrogen-based bands at the Fermi level. Although exhibits a classical instability persisting up to 17 GPa, it is anharmonically stable near ambient pressure when accounting for quantum nuclear effects. The presence of flat bands near is understood to arise from destructive quantum interference between and surrounding orbitals, with certain types of defects leaving the flat bands unaffected. The results suggest that if this system is superconducting, there is an optimal pressure near ambient where the superconducting is maximized by anharmonically stabilized low-frequency and nonadiabatically coupled high-frequency hydrogen modes. Despite the metastability of this structure, its dynamical stability when modeled beyond a classical harmonic approach suggests the narrow bands near do not cause structural distortions in certain Lu-H-N stoichiometries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Efficient calculation of carrier scattering rates from first principles

Abstract The electronic transport behaviour of materials determines their suitability for technological applications. We develop a computationally efficient method for calculating carrier scattering rates of solid-state semiconductors and insulators from first principles inputs. The present method extends existing polar and non-polar electron-phonon coupling, ionized impurity, and piezoelectric scattering mechanisms formulated for isotropic band structures to support highly anisotropic materials. We test the formalism by calculating the electronic transport properties of 23 semiconductors, including the large 48 atom CH 3 NH 3 PbI 3 hybrid perovskite, and comparing the results against experimental measurements and more detailed scattering simulations. The Spearman rank coefficient of mobility against experiment ( r s = 0.93) improves significantly on results obtained using a constant relaxation time approximation ( r s = 0.52). We find our approach offers similar accuracy to state-of-the art methods at approximately 1/500th the computational cost, thus enabling its use in high-throughput computational workflows for the accurate screening of carrier mobilities, lifetimes, and thermoelectric power.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Large tunable anomalous Hall effect in the kagome antiferromagnet U 3 Ru 4 Al 12

The Berry curvature in magnetic systems is attracting interest due to the potential tunability of topological features via the magnetic structure. f electrons, with their large spin-orbit coupling, abundance of noncollinear magnetic structures, and high electronic tunability, are attractive candidates to search for tunable topological properties. In this study, we measure anomalous Hall effect (AHE) in the distorted kagome heavy fermion antiferromagnet U 3 Ru 4 Al 12 . Furthermore, a large intrinsic AHE in high fields reveals the presence of a large Berry curvature. Moreover, the fields required to obtain the large Berry curvature are significantly different between B ∥ a and B ∥ a * , providing a mechanism to control the topological response in this system. Theoretical calculations illustrate that this sensitivity may be due to the heavy fermion character of the electronic structure. These results shed light on the Berry curvature of a strongly correlated band structure in magnetically frustrated heavy fermion materials but also emphasize 5 f electrons as an ideal playground for studying field-tuned topological states.

36 MATERIALS SCIENCE↗