Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electron density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Rocket observations of electron-density irregularities in the equatorial ionosphere below 200 km

Nike Apache rockets carring instrumentation to measure electron density and its fine structure in the equatorial ionosphere were launched from Chilca, Peru in May and June 1975. The fine structure experiment and the data reduction system are described. Results obtained from this system are presented and compared with those obtained by VHF radar and from other rocket studies. A description of the equatorial ionosphere and its features is also presented.

Klaus, D. E.↗

Electron densities for six planetary nebulae and HM SGE derived from the C 3 lambda 1907/1909 ratio

Electron densities for IC 418, NGC 6572, IC 1297, NGC 3242, NGC 6818, NGC 3211, and HM Sge derived from high dispersion IUE C III spectrograms are consistently higher than those derived from either surface brightness measurements of forbidden line intensity ratios in the visible. The nebulae were selected for a range of excitation classes from 3 to 9. Line splitting due to expansion velocities is observed for three objects. The great width of the lambda 1909 C III line in HM Sge suggests large expansion velocities.

Source record↗

New options for IRI electron density in the middle ionosphere

This paper reviews the present International Reference Ionosphere (IRI) model of electron density in the middle ionosphere and explores two new options for future editions of IRI. The first of these options is a better description of the bottomside thickness parameters, and the second is an analytical representation from E- to F2-peak using LAY-functions. For this analytical representation a table of standard parameters and constraints for the four LAY-functions recommended for IRI have been established.

Bilitza, Dieter↗

Sites of fine-scale electron density turbulence in the interstellar medium

Observations of radio-wave scattering effects probe interstellar electron-density turbulence. But with limited use of complementary data sets only broad conclusions have been obtained. The locations of this turbulence are unknown (phases, objects, etc.), as is the mechanism for its production, although it could play a role in various galactic processes. The IRAS data set was used to search for correlations between scattering and structures traced by infrared emitting dust. The existent HI (21-cm line emission), and 408-MHz radio-continuum all-sky surveys were used to search for correlations between scattering and structures traced by these emissions. Only lines of sight outside the galactic plane were considered (to better delimit the structures which might be causing scattering). No correlation is apparent between 21-cm line emission, or infrared continuum emission and interstellar scattering. However, a correlation exists between the scattering toward extragalactic radio sources and 408-MHz continuum emission.

Simonetti, John H.↗

Direct probing of electronic density distribution of a Rydberg state by high-order harmonic generation in a few-cycle laser pulse

We demonstrate that the electronic density distribution of a Rydberg state can be probed directly using a broadband harmonic spectrum in a few-cycle laser pulse. Taking advantage of the large orbital radius of a Rydberg state, we show that the Rydberg electron can be accelerated directly toward the core under the influence of a few-cycle laser pulse, leading to recombination and emission of harmonic photons. In this case the initial position of the electron and the harmonic order form a one-to-one correspondence, resulting in a realization of direct probing of the density distribution of the initial Rydberg state.

74 ATOMIC AND MOLECULAR PHYSICS↗

Edge electron density profiles and fluctuations measured by two-dimensional beam emission spectroscopy in the KSTAR

Beam emission spectroscopy (BES) system in Korea Superconducting Tokamak Advanced Research (KSTAR) has recently been upgraded. The background intensity was reduced from 30% to 2% by suppressing the stray lights. This allows acquisition of the relative electron density profiles on the plasma edge without background subtraction from the beam power modulation signals. The KSTAR BES system has its spatial resolution of 1 cm, the temporal resolution of 2 MHz, and a total 32 channel (8 radial × 4 poloidal) avalanche photo diode array. Most measurements were done on the plasma edge, r/a ∼ 0.9, with 8 cm radial measurement width that covers the pedestal range. High speed density profile measurements reveal temporal behaviors of fast transient events, such as the precursors of edge localized modes and the transitions between confinement modes. Low background level also allows analysis of the edge density fluctuation patterns with reduced background fluctuations. Propagation of the density structures can be investigated by comparing the phase delays between the spatially distributed channels.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Electron density distribution and disordered crystal structure of 8H-SiAlON, Si{sub 3−x}Al{sub 1+x}O{sub x}N{sub 5−x} (x∼2.2)

The 8H-SiAlON crystal with general formula Si{sub 3−x}Al{sub 1+x}O{sub x}N{sub 5−x} was characterized using laboratory X-ray powder diffraction (CuKα{sub 1}), transmission electron microscopy and energy dispersive X-ray spectroscopy. The [Si: Al] molar ratios were determined to be [0.21(1): 0.79(1)], corresponding to x=2.2(1). The Si{sub 0.8(1)}Al{sub 3.2(1)}O{sub 2.2(1)}N{sub 2.8(1)} compound is hexagonal with space group P6{sub 3}/mmc (Z=2). The unit-cell dimensions are a=0.298877(8) nm, c=2.30872(5) nm and V=0.178602(8) nm{sup 3}. The initial structural model was successfully derived by the charge-flipping method and further refined by the Rietveld method. The final structural model showed the positional disordering of two of the three (Si,Al) sites. The maximum-entropy method-based pattern fitting (MPF) method was used to confirm the validity of the split-atom model, in which conventional structure bias caused by assuming intensity partitioning was minimized. The reliability indices calculated from the MPF were R{sub wp}=4.74%, S (=R{sub wp}/R{sub e})=1.30, R{sub p}=3.40%, R{sub B}=1.04% and R{sub F}=0.74%. The disordered crystal structure was successfully described by overlapping four types of domains with ordered atom arrangements. The distribution of atomic positions in each of the domains can be achieved in the space group P6{sub 3}mc. Two of the four types of domains are related by a pseudo-symmetry inversion, and the two remaining domains also have each other the inversion pseudo-symmetry. - Graphical abstract: Bird's eye view of electron densities up to 49.3% (0.071 nm{sup −3}) of the maximum on the plane parallel to (110) with the corresponding atomic arrangements of Si{sub 0.8}Al{sub 3.2}O{sub 2.2}N{sub 2.8}. - Highlights: • Crystal structure of Si{sub 0.8}Al{sub 3.2}O{sub 2.2}N{sub 2.8} is determined by laboratory X-ray powder diffraction. • The atom arrangements are represented by the split-atom model. • The maximum-entropy method-based pattern fitting method is used to confirm the validity of the model. • The disordered structure is described by overlapping four types of domains with ordered atom arrangements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Correction for the IRI Topside Electron Density Model Based on Alouette/ISIS Topside Sounder Data

The topside segment of the International Reference Ionosphere (IRI) electron density model (and also of the Bent model) is based on the limited amount of topside data available at the time (40,OOO Alouette 1 profiles). Being established from such a small database it is therefore not surprising that the models have well-known shortcomings, for example, at high solar activities. Meanwhile a large data base of close to 200,000 topside profiles from Alouette 1,2, and ISIS I, 2 has become available online. A program of automated scaling and inversion of a large volume of digitized ionograms adds continuously to this data pool. We have used the currently available ISIs/Alouette topside profiles to evaluate the IRI topside model and to investigate ways of improving the model. The IRI model performs generally well at middle latitudes and shows discrepancies at low and high latitudes and these discrepancies are largest during high solar activity. In the upper topside IRI consistently overestimates the measurements. Based on averages of the data-model ratios we have established correction factors for the IRI model. These factors vary with altitude, modified dip latitude, and local time.

Bilitza, D.↗