Experimental lateral bending dynamics of the Atlas-Centaur-Surveyor launch vehicle
Lateral bending dynamic tests of Atlas Centaur Surveyor launch vehicle
Gerus, T. F.↗
SEARCH · Engineering Papers
Results for “dynamics testing”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Dynamic balancing of high-speed rotary machinery
Rotary dynamics test facility investigates and corrects imbalances in rotary components at speeds up to 60,000 rpm. Use of a vacuum chamber eliminates the effect of windage and facilitates the chilling of test pieces.
Bodensieck, E. J.↗
The Apollo structural damping study - Determination of modal damping for launch vehicles using experimental data Final technical report
Dynamic test analysis on modal damping forces of Saturn 5 Apollo vehicle
Reed, R. R.↗
Advancements in structural dynamic technology resulting from Saturn 5 programs, volume 1
Saturn 5 dynamic structural analysis by dynamic testing of scale replica models, mathematical models, and tests of full scale vehicle
Grimes, P. J.↗
Strapdown inertial attitude-indication evaluations
Strapdown inertial attitude indication, describing static and dynamic tests, error propagation profiles, performance prediction, etc
Gilmore, J. P.↗
Simple turbine balancing test apparatus
Simple, inexpensive apparatus has been devised for testing dynamic balance of turbine rotors. No elaborate instrumentation is required and rotor is spun by directing jet of air against blades. Basic principle involved is that of the vibration of a mass on a spring. Apparatus can be used where conventional, expensive, balance facilities are not readily available.
Vavra, M. H.↗
Dynamic behavior of air lubricated pivoted-pad journal-bearing, rotor system. 2: Pivot consideration and pad mass
Rotor bearing dynamic tests were conducted with tilting-pad journal bearings having three different pad masses and two different pivot geometries. The rotor was vertically mounted and supported by two three-pad tilting-pad gas journal bearings and a simple externally pressurized thrust bearing. The bearing pads were 5.1 cm (2.02 in.) in diameter and 2.8 cm (1.5 in.) long. The length to diameter ratio was 0.75. One pad was mounted on a flexible diaphragm. The bearing supply pressure ranged from 0 to 690 kilonewtons per square meter (0 to 100 psig), and speeds ranged to 38,500 rpm. Heavy mass pad tilting-pad assemblies produced three rotor-bearing resonances above the first two rotor critical speeds. Lower supply pressure eliminated the resonances. The resonances were oriented primarily in the direction normal to the diaphragm.
Nemeth, Z. N.↗
Development and evaluation of the impulse transfer function technique
The development of the test/analysis technique known as the impulse transfer function (ITF) method is discussed. This technique, when implemented with proper data processing systems, should become a valuable supplement to conventional dynamic testing and analysis procedures that will be used in the space shuttle development program. The method can relieve many of the problems associated with extensive and costly testing of the shuttle for transient loading conditions. In addition, the time history information derived from impulse testing has the potential for being used to determine modal data for the structure under investigation. The technique could be very useful in determining the time-varying modal characteristics of structures subjected to thermal transients, where conventional mode surveys are difficult to perform.
Mantus, M.↗
Laboratory and field evaluation of an underwater sand height gage
An underwater sand height gage was investigated. This instrument consisted of two transducers, one screened and one unscreened. Laboratory experimentation included static and dynamic tests with three test sands--fine, medium, and coarse. Field tests were conducted at Rudee Inlet, Virginia Beach, Virginia. Test results showed a linear response to up to 10 inches of sand loading. Deviation observed in identical tests appeared to be due to variation in the density of sand. Density differences reflected varying packing styles which, in turn, were a consequence of grain size and flow regime. Further evaluations of the sand height gage reflect this instrument's potential.
Swift, D. J. P.↗
Mathematical model for predicting human vertebral fracture
Mathematical model has been constructed to predict dynamic response of tapered, curved beam columns in as much as human spine closely resembles this form. Model takes into consideration effects of impact force, mass distribution, and material properties. Solutions were verified by dynamic tests on curved, tapered, elastic polyethylene beam.
Benedict, J. V.↗
Evaluation of aerodynamic derivatives from a magnetic balance system
The dynamic testing of a model in the University of Virginia cold magnetic balance wind-tunnel facility is expected to consist of measurements of the balance forces and moments, and the observation of the essentially six degree of freedom motion of the model. The aerodynamic derivatives of the model are to be evaluated from these observations. The basic feasibility of extracting aerodynamic information from the observation of a model which is executing transient, complex, multi-degree of freedom motion is demonstrated. It is considered significant that, though the problem treated here involves only linear aerodynamics, the methods used are capable of handling a very large class of aerodynamic nonlinearities. The basic considerations include the effect of noise in the data on the accuracy of the extracted information. Relationships between noise level and the accuracy of the evaluated aerodynamic derivatives are presented.
Raghunath, B. S.↗
Transport dynamics of a high-power-density matrix-type hydrogen-oxygen fuel cell
Experimental transport dynamics tests were made on a space power fuel cell of current design. Various operating transients were introduced and transport-related response data were recorded with fluidic humidity sensing instruments. Also, sampled data techniques were developed for measuring the cathode-side electrolyte concentration during transient operation.
Prokopius, P. R.↗
A study of digital gyro compensation loops
The feasibility is discussed of replacing existing state-of-the-art analog gyro compensation loops with digital computations. This was accomplished by designing appropriate compensation loops for the dry turned TDF gyro, selecting appropriate data conversion and processing techniques and algorithms, and breadboarding the design for laboratory evaluation. A breadboard design was established in which one axis of a Teledyne turned-gimbal TDF gyro was caged digitally while the other was caged using conventional analog electronics. The digital loop was designed analytically to closely resemble the analog loop in performance. The breadboard was subjected to various static and dynamic tests in order to establish the relative stability characteristics and frequency responses of the digital and analog loops. Several variations of the digital loop configuration were evaluated. The results were favorable.
Source record↗
The dynamic transfer function for a cavitating inducer
Knowledge of the dynamic performance of pumps is essential for the prediction of transient behavior and instabilities in hydraulic systems; the necessary information is in the form of a transfer function which relates the instantaneous or fluctuating pressure and mass flow rate at inlet to the same quantities in the discharge from the pump. The presence of cavitation within the pump can have a major effect on this transfer function since dynamical changes in the volume of cavitation contribute to the difference in the instantaneous inlet and discharge mass flow rates. The present paper utilizes results from free streamline cascade theory to evaluate the elements in the transfer function for a cavitating inducer and shows that the numerical results are consistent with the characteristics observed in some dynamic tests on rocket engine turbopumps.
Brennen, C.↗
Experimental and analytical dynamic flow characteristics of an axial-flow fan from an air cushion landing system model
An investigation was conducted to compare the steady-state and dynamic flow characteristics of an axial-flow fan which had been used previously as the air supply fan for some model air cushion landing system studies. Steady-state flow characteristics were determined in the standard manner by using differential orifice pressures for the flow regime from free flow to zero flow. In this same regime, a correlative technique was established so that fan inlet and outlet pressures could be used to measure dynamic flow as created by a rotating damper. Dynamic tests at damper frequencies up to 5 Hz showed very different flow characteristics when compared with steady-state flow, particularly with respect to peak pressures and the pressure-flow relationship at fan stall and unstall. A generalized, rational mathematical fan model was developed based on physical fan parameters and a steady-state flow characteristic. The model showed good correlation with experimental tests at damper frequencies up to 5 Hz.
Thompson, W. C.↗
Control system technology and tradeoffs for large space structures
The role of the control system in large space structure design is examined. It is pointed out that control and dynamics aspects of the structure must be considered very early in the design. Innovative techniques will be needed, such as on-orbit dynamic testing, offsetting of disturbance torques, and advances in the analysis area, particularly with respect to system modeling and achieving a tractable dimension of the problem. The technology pursued, while necessarily being focused, must not be too narrow, but should be concerned with the multidisciplinary aspects of large space structures.
Blair, J. C.↗
Characteristics of an Air Cushion Landing System incorporating an inelastic trunk
A series of static and dynamic tests performed on an Air Cushion Landing System (ACLS) incorporating inelastic trunk are described. The tests were performed on an apparatus which had provisions to isolate heave-pitch and roll motion on the prototype cushion. The results of the test show that the sides of the trunk behave differently from the trunk ends. The tests also demonstrate that the current ACLS designs suffer from low heave damping, low roll stiffness and fan stall problems.
Boghani, A. B.↗
Determination of load sequence effects on the degradation and failure of composite materials
A theoretical model was established to predict the fatigue behavior of composite materials, with emphasis placed on predictions of the degradation of residual strength and residual stiffness during fatigue cycling. The model parameters were evaluated from three test series including static strength fatigue life and residual strength tests. The tests were applied to two graphite/epoxy laminates. Load sequence effects were emphasized for both laminates and the predicted results agreed quite well with subsequent verification tests. Dynamic as well as static stiffness reduction data were collected by use of a PDP11-03 computer, which performed quite satisfactorily and permitted the recording of a substantial amount of dynamic stiffness reduction data.
Yang, J. N.↗