Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “density correlation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Twenty Years of Radiation Measurements in Low-Earth Orbit - What Have We Learned Space Radiation Environment?

The advent of the Space Shuttle program has made possible space radiation environment measurements spanning a wide range of altitudes and orbital inclinations over multiple solar cycles. These measurements range from routine integral dose measurements with thermoluminescent dosimeters to particle energy spectra measurements made with a charged particle telescope. This paper will review the new understanding about the space radiation environment gained from this diverse data set. Major findings from these measurements include: estimations of the westward drift rate of the South Atlantic Anomaly (SAA) of 0.28-0.49/y; evidence for a northward component to the SAA drift of 0.08-0.12/y; observation of the formation and decay of the pseudo-stable additional radiation belt following the Mar 1991 SPE and geomagnetic storm with an estimated decay e-folding time of 9-10 months; observation of a local geomagnetic east-west trapped proton exposure anisotropy with an estimated magnitude of 1.6-3.3; demonstration that the trapped proton exposure in low-Earth orbit (LEO) can be reasonably modeled as a power law function of atmospheric density in the SAA region, with best correlations obtained when the exospheric temperature saturates at 938-975 K; the actual solar cycle modulation of trapped proton exposure in LEO is less than predicted by the AP8 model; and the testing and validation of GCR flux models, radiation transport codes, and dynamic geomagnetic cutoff models. Long-term, time-resolved proportional counter measurements made aboard the Mir during the same period provides further demonstration of the solar cycle modulation of the trapped protons at low altitudes - the observed modulation is also well described as power law function of atmospheric density. These data and findings have helped to improve the overall accuracy of pre-mission crew exposure projections using various semi-empirical space environment models, radiation transport codes, and spacecraft radiation shielding models. During the rise phase of solar cycle 22 (1987-1991), the RMS error between preflight exposure projections and measured crew exposure was 73%. For the rise phase of cycle 23 (1997-2001), the preflight exposure projection RMS error has decreased to 23%. The launch and assembly of the Space Station has begun a new era of long-term LEO space environment monitoring. The radiation environment at the Space Station will be monitored with three external charged particle telescopes oriented in the velocity vector, anti-velocity vector, and zenith directions. Data from the telescopes will provide charge, mass, energy, and arrival direction for incident particles with energy to mass ratios of 13- 450 MeV/amu and Z of 1-24. The external environment data will be complimented by measurements from a portable charged particle telescope and proportional counter located inside the vehicle.

Golightly, Michael J.↗

Improving Multiday Solar Wind Speed Forecasts

We analyze the residual errors for the Wang-Sheeley-Arge (WSA) solar wind speed forecasts as a function of the photospheric magnetic field expansion factor (fp) and the minimum separation angle (d) in the photosphere between the footpoints of open field lines and the nearest coronal hole boundary. We find the map of residual speed errors are systematic when examined as a function of fp and d. We use these residual error maps to apply corrections to the model speeds. We test this correction approach using 3-day lead time speed forecasts for an entire year of observations and model results. Our methods can readily be applied to develop corrections for the remaining WSA forecast lead times which range from 1 to 7 days in 1-day increments. Since the solar wind density, temperature, and the interplanetary magnetic field strength all correlate well with the solar wind speed, the improved accuracy of solar wind speed forecasts enables the production of multiday forecasts of the solar wind density, temperature, pressure, and interplanetary field strength, and geophysical indices. These additional parameters would expand the usefulness of Air Force Data Assimilative Photospheric Flux Transport-WSA forecasts for space weather clients.

H A Elliot↗

Correlative study of thermospheric gravity waves and tropospheric vorticity area index

Based on the occurrence frequency of wave-like structures in 23,691 individual measurements of thermospheric density, it is demonstrated that there is no significant hemispherical correlation between satellite-measured thermospheric wave-like structures and the tropospheric vorticity area index in the epoch 1974-1976. However, in the northern polar zone, (60-90 deg) N, wave occurrence frequency is greater for large values of the 500 mb vorticity area index.

Chiu, Y. T.↗

Optimized 4 pi spherical shell depleted uranium-water shield weights for 200 to 550-megawatt reactors

Optimization calculations to determine minimum 4 pi spherical-shell weights were performed at 200-, 375-, and 550-megawatt-thermal reactor power levels. Monte Carlo analyses were performed for a reactor power level corresponding to 375 megawatts. Power densities for the spherical reactor model used varied from 64.2 to 256 watts per cubic centimeter. The dose rate constraint in the optimization calculations was 0.25 mrem per hour at 9.14 meters from the reactor center. The resulting shield weights were correlated with the reactor power levels and power densities by a regression analysis. The optimum shield weight for a 375-megawatt, 160-watt-per-cubic-centimeter reactor was 202,000 kilograms.

Wohl, M. L.↗

Measurements of recombination of electrons with H3(plus) and H5(plus) ions

The electron-ion recombination coefficients for H3(+) and H5(+) ions were determined by means of a microwave afterglow/mass spectrometer apparatus. Measurements of electron density decays in helium-hydrogen mixtures are correlated with the decay of mass-identified ion currents to the wall of the microwave cavity. At low partial pressures of hydrogen in the mixture, the ion H3(+) dominates the ion composition and the ion wall current tracks the electron density decay curves. From recombination controlled electron density decay curves, the values alpha (H3(+)) = (2.9 + or - 0.3), (2.3 + or - 0.3), and (2.0 + or - 0.2) x 0.0000001 cu cm per sec, are obtained at 205, 300 and 450 K, respectively. At higher partial pressures of hydrogen and low temperatures, where (H5(+)) is the dominant ion, the value alpha (H5(+)) = (3.6 + or - 1.0) x 0.0000001 cu cm per sec is obtained at 205 K. The implications of these results concerning ionization levels in the atmospheres of the outer planets and in the interstellar medium are discussed.

Leu, M. T.↗

Mshpy23: A User-Friendly, Parameterized Model of Magnetosheath Conditions

Lunar Environment heliospheric X-ray Imager (LEXI) and Solar wind – Magnetosphere - Ionosphere Link Explorer (SMILE) will observe magnetosheath and its boundary motion in soft X-rays for understanding magnetopause reconnection modes under varioussolar wind conditions after their respective launches in 2024 and 2025. Magnetosheath conditions, namely, plasma density, velocity, and temperature, are key parameters for predicting and analyzing soft X-ray images from the LEXI and SMILE missions. We developed a user-friendly model of magnetosheath that parameterizes number density, velocity, temperature, and magnetic field by utilizing the global Magnetohydrodynamics (MHD) model as well as the pre-existing gas-dynamic and analytic models. Using this parameterized magnetosheath model, scientists can easily reconstruct expected soft X-ray images and utilize them for analysis of observed images of LEXI and SMILE without simulating the complicated global magnetosphere models. First, we created an MHD based magnetosheath model by running a total of 14 OpenGGCM global MHD simulations under 7 solar wind densities (1, 5, 10, 15, 20, 25, and 30cm−3) and 2 interplanetary magnetic field BZ components (± 4nT), and then parameterizing the results in new magnetosheath conditions. We compared the magnetosheath model result with THEMIS statistical data and it showed good agreement with a weighted Pearson correlation coefficient greater than 0.77, especially for plasma density and plasma velocity. Second, we compiled a suite of magnetosheath models incorporating previous magnetosheath models (gas-dynamic, analytic), and did two case studies to test the performance. The MHD based model was comparable to or better than the previous models while providing self consistency among the magnetosheath parameters. Third, we constructed a tool to calculate a soft X-ray image from any given vantage point, which can support the planning and data analysis of the aforementioned LEXI and SMILE missions. A release of the code has been uploaded to a Github repository.

Magnetosheath↗

Measurements of Heat-Transfer and Friction Coefficients for Helium Flowing in a Tube at Surface Temperatures up to 5900 Deg R

Measurements of average heat transfer and friction coefficients and local heat transfer coefficients were made with helium flowing through electrically heated smooth tubes with length-diameter ratios of 60 and 92 for the following range of conditions: Average surface temperature from 1457 to 4533 R, Reynolds numbe r from 3230 to 60,000, heat flux up to 583,200 Btu per hr per ft2 of heat transfer area, and exit Mach numbe r up to 1.0. The results indicate that, in the turbulent range of Reynolds number, good correlation of the local heat transfer coefficients is obtained when the physical properties and density of helium are evaluated at the surface temperature. The average heat transfer coefficients are best correlated on the basis that the coefficient varies with [1 + (L/D))(sup -0,7)] and that the physical properties and density are evaluated at the surface temperature. The average friction coefficients for the tests with no heat addition are in complete agreement with the Karman-Nikuradse line. The average friction coefficients for heat addition are in poor agreement with the accepted line.

Taylor, Maynard F.↗

High Energy Particle Acceleration and Turbulent Magnetic Field Amplification in Shell Type Supernova Remnants

Thesis submitted to the faculty of the Graduate School of the University of Minnesota in partial fulfillment of the requirements for the degree of Doctor of Philosophy. Part I discusses the spatial correlation between the x-ray and radio morphologies of Cas A, and in the process address: the effect of inhomogeneous absorption on the apparent x-ray morphology, the interaction between the SNR and a molecular cloud, and the rapid move toward equipartition between the magnetic and gas energy densities. Discussions of the x-ray./radio correlation continues in Chapter 5, where we present a new, deep, ROSAT HRI image of Cas A. Chapter 7 presents ASCA spectra, with non-thermal spectral fits for 13 of the youngest SNRs in the Galaxy.

Keohane, Jonathan Wilmore↗

The M Solar Mass - L(sub bulge) Correlation

New detections of supermassive black hole (BH) candidates are used to update the observed correlation between BH mass M and the luminosity L(sub bulge) of the bulge component of the host galaxy. Our main purpose is to test whether the correlation is real or just the upper envelope of a distribution that extends to smaller Solar Mass. We also illustrate the following conclusions: 1 -- BH mass correlates much better with bulge luminosity than with the total luminosity of the galaxy. 2 -- BH mass correlates with the luminosity of the high-density central component in disk galaxies independent of whether that component is a classical bulge (essentially a mini-elliptical) or a pseudobulge (believed to form via inward transport of disk material). This conclusion is based on only three pseudobulges, so it needs to be checked. 3 -- The BH mass correlates with the velocity dispersion of the bulge component outside the region influenced by the BH. That is, it correlates with the depth of the potential well in which it lives. Our conclusions are consistent with the hypothesis that (pseudo)bulge formation and BH feeding are closely connected. To first order, present data do not show any dependence of M\bullet on the details of whether BH feeding happens rapidly during a collapse or slowly via secular evolution of the disk.

Kormendy, J.↗

Observations of neutral composition and related ionospheric variations during a magnetic storm in February 1974

The neutral-atmosphere composition experiment on Atmosphere Explorer C measured N2, O, Ar, and He densities during a magnetic storm at altitudes down to about 160 km. At latitudes above 45 deg N, N2 and Ar densities generally increase during the storm, while He and O densities decrease. Below 45 deg N all densities tend to increase during the storm. The density increases at perigee indicate that density- or temperature-profile changes are taking place below 160 km. The return to prestorm conditions is very slow, demonstrating the integrating effect of the atmospheric response. A recent theoretical model incorporating thermospheric circulation and diffusion effects reproduces the longitudinally averaged data, including latitude trends and the asymmetry about the storm maximum. Comparison with the mass-spectrometer and incoherent-scatter empirical model shows qualitative agreement with latitude trends but not with storm asymmetry, while the earlier J71 model based on total mass density is not in agreement with observed latitudinal trends. A close correlation is found between in situ O/N2 measurements and in situ and ground-based ionosonde measurements of electron density.

Hedin, A. E.↗

The large scale dust distribution in the inner galaxy

Initial results are presented from a new large-scale survey of the first quadrant of the galactic plane at wavelengths of 160, 260, and 300 microns. The submillimeter wavelength emission, interpreted as thermal radiation by dust grains, reveals an optically thin disk of angular width about 0.09 deg (FWHM) with a mean dust temperature of 23 K and significant variation of the dust mass column density. Comparison of the dust column density with the gas column density inferred from CO survey data shows a striking spatial correlation. The mean luminosity per hydrogen atom is found to be 2.5 x 10 to the -30th W/H, implying a radiant energy density in the vicinity of the dust an order of magnitude larger than in the solar neighborhood. The data favor dust in molecular clouds as the dominant submillimeter radiation source.

Hauser, M. G.↗

Fission-gas release from uranium nitride at high fission rate density

A sweep gas facility has been used to measure the release rates of radioactive fission gases from small UN specimens irradiated to 8-percent burnup at high fission-rate densities. The measured release rates have been correlated with an equation whose terms correspond to direct recoil release, fission-enhanced diffusion, and atomic diffusion (a function of temperature). Release rates were found to increase linearly with burnups between 1.5 and 8 percent. Pore migration was observed after operation at 1550 K to over 6 percent burnup.

Weinstein, M. B.↗

Molecular column densities in selected model atmospheres

From an examination of predicted column densities, the following conclusions were drawn: (1) The SiO ought to be visible in carbon stars which were generated from triple alpha burning, but absent from carbon stars generated from the CNO bi-cycle. (2) Variation in the observed relative strengths of TiO and ZrO is indicative of real differences in the ratio Ti/Zr. (3) The TiO/ZrO ratio shows a small variation as C/O and effective temperature is changed. (4) Column density of silicon dicarbide (SiC2) is sensitive to abundance, temperature, and gravity; hence all relationships between the strength of SiC2 and other stellar parameters will show appreciable scatter. There is however, a substantial luminosity effect present in the SiC2 column densities. (5) Unexpectedly, SiC2 is anti-correlated with C2. (6) The presence of SiC2 in a carbon star eliminates the possibility of these stars having temperatures greater than or equal to 3000 K, or being produced through the CNO bi-cycle.

Johnson, H. R.↗

Electron temperatures in the wake of an ionospheric satellite

We present measurements of electron temperature (Te) made by a retarding potential analyzer and a Langmuir probe (both flush-mounted on the spin-stabilized satellite Explorer 31) to investigate the variation of Te around the satellite. Most of the time there is a Te variation, which repeats for given ionospheric conditions. The variation is strongly controlled by the angle between the velocity vector and the probe normal, Te usually being enhanced in the near wake of the satellite. Magnetic field control of Te, if it is present, is hidden by the stronger velocity vector control. Our results indicate that the magnitude of the Te enhancement in the wake does not depend on the average ion mass (M), although the electron density depletion in the wake is strongly correlated with M.

Troy, B. E., Jr.↗

Mobile Bay turbidity plume study

Laboratory and field transmissometer studies on the effect of suspended particulate material upon the appearance of water are reported. Quantitative correlations were developed between remotely sensed image density, optical sea truth data, and actual sediment load. Evaluation of satellite image sea truth data for an offshore plume projects contours of transmissivity for two different tidal phases. Data clearly demonstrate the speed of change and movement of the optical plume for water patterns associated with the mouth of Mobile bay in which relatively clear Gulf of Mexico water enters the bay on the eastern side. Data show that wind stress in excess of 15 knots has a marked impact in producing suspended sediment loads.

Crozier, G. F.↗

Characteristics of IR variable stars as observed from orbit

A selection of infrared variable stars was studied at wavelength 2.7 microns during 1971-1975 with data from U.S. Air Force satellites. Stars observed in this program are classified as long-period variable stars, semiregular variables, and irregular variables and are among the strongest stellar sources at this wavelength. In addition, a few new, as yet unclassified variable stars were identified during the course of the investigation. Time scales of reproducible variations range from a few weeks to a few years, and amplitudes of variation are as large as a factor of three for stars with periods of order one year. The minimum infrared flux density of a long-period star repeats accurately from one cycle to the next, whereas the maximum flux density was found to be unstable. The correlation of 2.7 micron and radio emission line data from one, well-studied long-period variable is consistent with the hypothesis that the H2O and OH circumstellar masers are saturated, if pumped by the stellar infrared flux near 2.7 microns.

Maran, S. P.↗

Venus gravity - A high-resolution map

The Doppler data from the radio tracking of the Pioneer Venus Orbiter (PVO) have been used in a two-stage analysis to develop a high-resolution map of the gravitational potential of Venus, represented by a central mass and a surface mass density. The two-stage procedure invokes a Kalman filter-smoother to determine the orbit of the spacecraft, and a stabilized linear inverter to estimate the surface mass density. The resultant gravity map is highly correlated with the topographic map derived from the PVO radar altimeter data. However, the magnitudes of the gravity variations are smaller than would be expected if the topography were uncompensated, indicating that at least partial compensation has taken place.

Reasenberg, R. D.↗