Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “current”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Field Study of Nighttime Leakage Currents in Bifacial PV Modules: Correlation with Atmospheric Electric Field Data

Leakage currents measured on PV modules in the field originate from a potential difference between the modules' frame and the cells. They can be a relative indicator of Potential-Induced Degradation (PID) severity, especially when comparing the same module design in a different environment. As modules are not operating at night, no leakage current should be observed but our team has reported several events of nighttime leakage currents on bifacial PV modules. These events have been firstly observed during a thunderstorm that are characterized by strong atmospheric electrical field values. This lead us to believe that nighttime leakage currents could originate from the atmospheric electric charges. In this paper, we correlate nighttime leakage currents measured on bifacial PV modules with field mill data to identify the origin of nighttime leakage currents. Our results show that so far, no leakage currents at night occur when the atmospheric electric field is between 0 and 150–200 V/m (standard value for fair weather). As soon as the atmospheric electric field is out of this range, leakage currents are observed with or without rain involved. This suggests a transport of charged particles from the atmosphere to the modules' frame. A combination of heavy rain with strong atmospheric electric field results into high nighttime leakage currents with a magnitude up to 8 times higher than what observed during the day with -1500V applied. This is explained by an easier transport of the charged particles through the water droplets. Based on these results, leakage currents observed during the day might not be only due to the inherent potential difference between the frame and the cells depending on the atmospheric electric field activity. We believe that it should be taken into account in PID studies.

14 SOLAR ENERGY↗

Dynamics of Current-Sharing Within a REBCO Tape-Stack Cable

Current redistribution in a non-insulating REBCO tape-stack cable may enable the use of such a cable in a high field dipole without provision for transposition of the constituent tapes. As current is increased in the REBCO cable a dynamic resistance arises in the superconducting layer near operation at critical current. The critical current of each tape in the stack is determined by the local magnetic field variation within the cable. The superconducting-normal transition in REBCO occurs over a working range of current and, within that range, the longitudinal Ohmic electric field produces a transverse electric field between adjacent tapes with different critical currents. Circuit models indicate that, as a given tape approaches critical operation, current will naturally redistribute to neighboring tapes with higher current carrying capacity due to the dynamic rise in resistivity thus preventing premature quench. Here, a multi-scale model is being developed to study the dynamics of current-sharing, the limits of stability, and the impact of fluctuations in critical-current density along each tape.

43 PARTICLE ACCELERATORS↗

High Average Current Bunched Electron Source for RF Accelerators

High-average current high-quality electron beams are imperative for high-power RF accelerators used in various energy and environmental applications in industry, medicine, and national security as well as for advanced existing and future accelerator systems such as PIP II, particle colliders (eRHIC BNL) for cooling high-energy proton, ion, and hadron beams, storage rings, wakefield accelerators (AWA), and energy recovery linacs. The most common current approach to generate high-peak current high-brightness short electron bunches uses photoemission excited by intense laser radiation. However, to avoid overheating photocathodes are operated at a subharmonic of the linac frequency that in turn restricts the average beam current. There are also limitations in the electron-beam average current due to the average power available from drive lasers. On the other hand, the state of the art thermionic sources that produce high average current electron beams do not have yet good emission gating methods to realize sufficiently short and good quality electron bunches. We develop a robust thermionic electron source (e-source) of >1 A average current with advanced gating of the emission at the linac-frequency and its 3rd harmonic. Central to the approach is a novel scheme for energy efficient feeding of the 3rd-harmonic power in the RF gap. The cathode is attached to the gun cavity through this small emission-gating gap in which the RF modes are excited. The use of thermionic emission allows for the desired high-average current CW electron beams. Adding the 3rd emission gating harmonic shortens the electron bunches and by this means lessens impact of the RF curvature on the beam quality resulting in the smaller energy spread and bunch emittances. Such high current electron beam is suitable for injection into high-power normal- or superconducting linacs in CW mode at a high repetition rate of the linac frequency. In Phase I, we performed modeling and beam dynamics, parametric, and optimization studies. A >1A average current e-source with 200,000hrs lifetime expectancy has been demonstrated in the simulations. We have developed baseline design of the e-source and its components. It is anticipated that the e-source will be in demand for normal- and superconducting particle accelerators and will benefit many commercial and energy and environmental applications such as treating waste and potable water, sludge, stack gases, and medical waste as well as X-ray sources for medicine, sterilization, materials processing, geology, and non-intrusive imaging.

43 PARTICLE ACCELERATORS↗

The Regenerative Current Mirror: A Very Low Power Front-End Amplifier for Silicon Pixel Detectors

In pixelized detectors, reducing power consumption in the front- end ASIC chips becomes a crucial demand. Optimization based on mature pre-amplifier schemes today is unlikely to bring sufficient improvements. A new CMOS front-end gain stage topology with very low power consumption called regenerative current mirror is developed to fulfill the demand. The circuit takes advantage of high-speed performance of current amplification while operating with relatively low bias current. The regenerative current mirror uses a NMOS current mirror and a PMOS current mirror, both with nominal gain of 1, to form a loop-back topology that provides a positive feedback. An NMOS FET with an external adjustable voltage applied to it gate terminal is used to limit open loop gain of the current mirrors to be slightly lower than 1. This yields a net gain of the positive feedback loop to be much larger than 1 while operating the current mirrors under relatively low bias currents. Simulation shows that in 65 nm fabrication process, the power consumption of the gain stages suitable for silicon pixel detectors can be controlled < 10 micro-Watts per channel. Another novel low-power circuit called Pseudo-Thyristor presented in another document will replace traditional discriminator and the Regenerative Current Mirror plus Pseudo- Thyristor will provide a full solution for the silicon pixel low-power frontend ASIC.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

THE DYNAMICAL GENERATION OF CURRENT SHEETS IN ASTROPHYSICAL PLASMA TURBULENCE

Turbulence profoundly affects particle transport and plasma heating in many astrophysical plasma environments, from galaxy clusters to the solar corona and solar wind to Earth's magnetosphere. Both fluid and kinetic simulations of plasma turbulence ubiquitously generate coherent structures, in the form of current sheets, at small scales, and the locations of these current sheets appear to be associated with enhanced rates of dissipation of the turbulent energy. Therefore, illuminating the origin and nature of these current sheets is critical to identifying the dominant physical mechanisms of dissipation, a primary aim at the forefront of plasma turbulence research. Here, we present evidence from nonlinear gyrokinetic simulations that strong nonlinear interactions between counterpropagating Alfvén waves, or strong Alfvén wave collisions, are a natural mechanism for the generation of current sheets in plasma turbulence. Furthermore, we conceptually explain this current sheet development in terms of the nonlinear dynamics of Alfvén wave collisions, showing that these current sheets arise through constructive interference among the initial Alfvén waves and nonlinearly generated modes. The properties of current sheets generated by strong Alfvén wave collisions are compared to published observations of current sheets in the Earth's magnetosheath and the solar wind, and the nature of these current sheets leads to the expectation that Landau damping of the constituent Alfvén waves plays a dominant role in the damping of turbulently generated current sheets.

79 ASTRONOMY AND ASTROPHYSICS↗

Spin current devices and methods of fabrication thereof

Pure spin current devices are provided. The devices include sandwich structures of metal/magnetic insulator/metal. A first current injected in a first metal layer generates a pure spin current. The spin current can be switched between “on” and “off” states by controlling an in-plane magnetization orientation of the magnetic insulator. In the “on” state, the pure spin current is transmitted from the first metal layer to the second metal layer, through the magnetic insulator layer. The pure spin current in the second metal layer induces generation of a second charge current. In the “off” state, the pure spin current is absorbed at the interface between the first metal layer and the metal insulator. Such structures can serve as pure spin current valve devices or provide analog functionality, as rotating the in-plane magnetization provides analog sinusoidal modulation of the spin current.

Shi, Jing↗

Start current of dielectric-loaded grating in Smith-Purcell radiation

In this paper, a three-dimensional dielectric loaded grating (DLG) is proposed for the Smith-Purcell (SP) device. Taking into the considerations of thickness and width of electron beam, the dispersion equation is derived by using field matches method. The complex frequency is obtained by the numerical solution of dispersion equation, in which the imaginary part represents linear growth rate. The impacts of the electron beam filling factor (EBFF) on growth rate are discussed under the condition that the beam current and beam current density are kept as constants, respectively. In addition, the start current for SP oscillator is obtained by using the dispersion relation combined with boundary conditions. The relationship between the start current and other parameters is discussed and compared with the conventional metal grating. The results show that with the increasing of EBFF, the peak growth rate increases rapidly firstly and then decreases slowly, in which the current and current density are kept as constants, respectively. For the SP oscillator, the start current is increased with the shifting up beam voltage, but it is decreased with the improved EBFF, and only it has a slightly increasing trend when EBFF is close to 1. In addition, the start current is decreased with the increasing of relative dielectric constant, which indicates that by introducing DLG, the start current can be effectively reduced. Theoretical results are in good agreement with that of the simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Operation of a semiconductor opening switch at the pumping time of a microsecond and low current density

The mechanism of operation of a semiconductor opening switch (a SOS diode) at the forward-pumping time of a microsecond and low current density was studied. The current's cutoff time shorter than 10 ns at the voltage across the SOS diode as high as 80 kV was obtained experimentally at the reverse-pumping time {approx}200 ns and the cutoff-current density of about 120 A/cm{sup 2}. These are the results of numerical simulation of processes in the dynamics of the electron-hole plasma in the diode at the stages of pumping and current cutoff. It is shown that the stage of the current cutoff is similar to the conditions of the SOS effect observed at a high current density and is also related to motion of the concentration front of excess plasma along the heavily doped p-type region of the structure. In spite of the low density of current in the course of its cutoff, the switching process takes several nanoseconds. The reason is that the low current density is compensated by a low concentration of the excess plasma at the front, which retains the high velocity of motion of this front at the stage of the current cutoff.

36 MATERIALS SCIENCE↗

Resistive wall heating due to image current on the beam chamber for a superconducting undulator

The image-current heating on the resistive beam chamber of a superconducting undulator (SCU) was calculated based on the normal and anomalous skin effects. Using the bulk resistivity of copper for the beam chamber, the heat loads were calculated for the residual resistivity ratios (RRRs) of unity at room temperature to 100 K at a cryogenic temperature as the reference. Then, using the resistivity of the specific aluminum alloy 6053-T5, which will be used for the SCU beam chamber, the heat loads were calculated. An electron beam stored in a storage ring induces an image current on the inner conducting wall, mainly within a skin depth, of the beam chamber. The image current, with opposite charge to the electron beam, travels along the chamber wall in the same direction as the electron beam. The average current in the storage ring consists of a number of bunches. When the pattern of the bunched beam is repeated according to the rf frequency, the beam current may be expressed in terms of a Fourier series. The time structure of the image current is assumed to be the same as that of the beam current. For a given resistivity of the chamber inner wall, the application of the normal or anomalous skin effect will depend on the harmonic numbers of the Fourier series of the beam current and the temperature of the chamber. For a round beam chamber with a ratius r, much larger than the beam size, one can assume that the image current density as well as the density square, may be uniform around the perimeter 2πr. For the SCU beam chamber, which has a relatively narrow vertical gap compared to the width, the effective perimeter was estimated since the heat load should be proportional to the inverse of the perimeter.

43 PARTICLE ACCELERATORS↗

Simulation Study of Current Drive Efficiency for KSTAR 5 GHz LHCD

Theoretical 5 GHz lower hybrid current drive (LHCD) efficiency using power spectrum given by 0-D Brambilla code and Lower Hybrid Simulation Code (LSC) have been studied for KSTAR. In LSC simulation, RF-driven current and current drive efficiency has been found to be deeply dependent on the profiles of the plasma density and temperature as well as on current profile in order to obtain hollow current profile favorable for advance tokamak operation mode and steady state operation. The peaked density and broad temperature profile control has been found to be efficient in current drive with maximum RF-driven current larger than 400 kA/MW with very high efficiency when the peak plasma density is ranged from 0.2 to 2.0x1020 m-3, and the peak electron temperature range of 2-20 keV together with toroidal field 2-3.5 T and Ip = 0.5-2 MA. The on-/off-axis current profile controllability is also investigated through parametric scan, and small negative magnetic shear is seen at the narrow region of the off-axis for very high temperature regime and for high BT and I{sub p}. In order to achieve the same for lower temperature regime Ip has to be lower and also for higher LH-power compromising with CD efficiency in this case.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Collisionless current generation in the center of the tokamak plasma by an isotropic source of {alpha}-particles

The density of the noninductive current generated due to collisionless motion of {alpha}-particles in the tokamak magnetic field is calculated. The analysis is based on fully three-dimensional calculations of charged particle trajectories without simplifying assumptions typical for drift and neoclassical approaches. The current is calculated over the entire cross section of the plasma column, including the magnetic axis. It is shown that the current density is not a function of a magnetic surface and is strongly polarized over the poloidal angle. The current density distribution in the tokamak poloidal cross section is obtained, and the current density as a function of the safety factor, the tokamak aspect ratio, and the ratio of the particle Larmor radius on the axis to the tokamak minor radius is determined. It is shown that, when the source of {alpha}-particles is spatially nonuniform, the current density in the center of the tokamak is nonzero due to asymmetry of the phase-space boundary between trapped and passing particles. The current density scaling in the tokamak center differs from the known approximations for the bootstrap current and is sensitive to the spatial distribution of {alpha}-particles.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Analysis of temperature-dependent dark current transport mechanism for GaAs-based blocked-impurity-band (BIB) detectors

Temperature-dependent dark current transport mechanism has been analyzed for GaAs-based blocked-impurity-band detectors. Device structure, processing steps and physical models are described in detail. In this work, the analysis of dark current transport mechanism has been greatly simplified by electron drift current related discussion based on the assumption that the diffusion current and the generation–recombination current as two dominating components of dark current in the absorbing layer can be equivalent to the electron drift current in the blocking layer. After confirming this assumption, our discussion focuses on why dark current is a monotonically increasing function of operation temperature for a fixed anode bias. Our results reveal that from dark current suppression point of view, low donor doping level and low operation temperature are preferred.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Triple splitting of a thin current sheet: A new type of plasma equilibrium

A hybrid numerical model of a one-dimensional current sheet in the Earth's magnetotail is used to calculate a new self-consistent equilibrium state in the form of a triply split current sheet composed of three thin subsheets that are located close to each other and whose thickness is on the order of the ion gyroradius. The current in the central subsheet flows in the negative direction, opposite to the direction of the currents in the side subsheets. The magnetic field of the triply split current sheet has three neutral planes, in contrast to that of a classical bell-shaped current sheet with a single neutral plane at the sheet center. The particle dynamics in a triply split current configuration is analyzed. It is shown that, within the sheet, the current carriers-untrapped ions-move along meandering trajectories and can maintain an equilibrium structure self-consistently. It is found that a triply split current sheet is stable against external perturbations. The results obtained can help to explain complex dynamic processes occurring in the Earth's magnetotail.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Nonlocal discrete continuity and invariant currents in locally symmetric effective Schrödinger arrays

We develop a formalism relating nonlocal current continuity to spatial symmetries of subparts in discrete Schrödinger systems. Breaking of such local symmetries hereby generates sources or sinks for the associated nonlocal currents. The framework is applied to locally inversion-(time-) and translation-(time-) symmetric one-dimensional photonic waveguide arrays with Hermitian or non-Hermitian effective tight-binding Hamiltonians. For stationary states the nonlocal currents become translationally invariant within symmetric domains, exposing different types of local symmetry. They are further employed to derive a mapping between wave amplitudes of symmetry-related sites, generalizing also the global Bloch and parity mapping to local symmetry in discrete systems. In scattering setups, perfectly transmitting states are characterized by aligned invariant currents in attached symmetry domains, whose vanishing signifies a correspondingly symmetric density. For periodically driven arrays, the invariance of the nonlocal currents is retained on period average for quasi-energy eigenstates. The proposed theory of symmetry-induced continuity and local invariants may contribute to the understanding of wave structure and response in systems with localized spatial order. - Highlights: • Nonlocal current continuity related to subsystem symmetries in discrete Schrödinger arrays. • Application to 1D (non-) Hermitian bound and scattering tight-binding setups. • Local inversion/translation symmetries described by invariant nonlocal currents. • Generalized parity/Bloch mapping between local-symmetry-related sites via currents. • Time-averaged invariant currents of Floquet states in periodically driven arrays.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Adaptive Fault Current-Limiting Control of MMC for Protection of Multiterminal HVDC Systems

A crucial requirement of the protection system for multi-terminal high-voltage DC (MTDC) transmission is that it is capable of selectively isolating the faulty area from the healthy part of the network using DC circuit breakers (DCCBs), while ensuring continuous operation of converter stations in the healthy part of the network. But in the half-bridge modular multilevel converters (HB-MMCs) based MTDC system, since HB-MMCs do not have fault current absorption capability, when a DC fault occurs, the rising fault currents can quickly reach the blocking threshold within a few milliseconds and disrupt the operation of the MMCs in the healthy part. To facilitate fault-ride-through capability of MTDC system, large DC reactors are often considered in series with DCCBs to reduce the rate of rise of the fault current and prevent blocking the MMCs in the healthy part of the DC networks; however, large DC reactors prohibitively increase the cost of the system, introduce stability issues and can create post-fault oscillations. This paper presents an adaptive fault current-limiting control method for MMCs to avoid their blocking and enable the continuous operation of the healthy part of MTDC systems. The method contains two parts: The first part is based on circulating current feedforward control, which emulates virtual reactors in each arm of an MMC, and is immediately activated when the fault current starts to increase to reduce the rate of rise of the fault current. The second part temporarily bypasses all the submodules when the fault current exceeds a preset threshold, complementing the fault current-limiting effect of the first part. Neither part requires fault detection signals, and they are automatically activated during faults. Simulation case studies of a four-terminal bipolar MMC-based high-voltage DC system are presented to demonstrate the effectiveness of the proposed control methods.

active fault current limiting↗

Fluid modeling of radio frequency and direct currents in a biased magnetized plasma

This model aims at simulating a magnetized plasma column connected on one side to a probe and on the other side to an ICRH (Ion Cyclotron Resonant Heating) antenna. This is a double probe modeling of a plasma flux tube exchanging perpendicular currents: rf polarization current and dc currents (inertia, viscous, and friction) perpendicular to the magnetic field. A self consistent solution for the rectified potential and the density is obtained under the assumptions of flute hypothesis, inertialess electrons, and no collision in parallel direction. The main effect of rf biasing on the antenna side is to shift the IV characteristic so that the floating potential can be increased up to ln(I{sub 0}(eV{sub rf}/(k{sub B}T{sub e}))), with I{sub 0} the modified Bessel function of the first kind. On the contrary, the effect of dc currents is to decrease the plasma potential and the sheath potential which can be lower than 3k{sub B}T{sub e}/e or even be negative. Experimental characteristics are well matched by the 1D fluid code and exhibit very high negative currents (more than 30 j{sub i} the ion saturation current) for high positive biasing of the probe and for long flux tube (10 m). The non-saturation of the electron current is here due to high transverse transport enhanced by convective fluxes and dc currents able to bring an amount of density around the biased flux tube. During comparisons with experiments, the floating potential measured by a reciprocating probe is recovered by the code revealing that for a 120 V measured peak potential on the probe, the rf potential on the ICRH antenna is twice this value. Finally, the density profile can be flattened or steepened as a function of the transverse dc current direction.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Voltage-controllable generator of pure spin current: A three-terminal model

Three-terminal devices have been frequently proposed to generate the pure spin current. However, the controllability and stability of pure spin current still needs to be improved. In this paper, a three-terminal device, composed of a ferromagnetic metallic lead and two nonmagnetic semiconductor leads coupled with a quantum dot, is employed to study the properties of electron spin transport. The results show that when the external voltage on one of nonmagnetic semiconductor leads is adjusted to a proper range, a pure spin current plateau or a fully spin-polarized current plateau appears in another nonmagnetic semiconductor lead. In a wide range of external voltage, the pure spin current or the spin-polarized current is kept unchanged. Since the change of temperature may considerably influence the spin-polarization of current and is inevitable actually, we studied the corresponding compensation to keep the pure spin current unchanged. Furthermore, the effect of device parameters on the pure spin current is also investigated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of electron pressure anisotropy on current sheet configuration

Recent spacecraft observations in the Earth's magnetosphere have demonstrated that the magnetotail current sheet can be supported by currents of anisotropic electron population. Strong electron currents are responsible for the formation of very thin (intense) current sheets playing the crucial role in stability of the Earth's magnetotail. We explore the properties of such thin current sheets with hot isotropic ions and cold anisotropic electrons. Decoupling of the motions of ions and electrons results in the generation of a polarization electric field. The distribution of the corresponding scalar potential is derived from the electron pressure balance and the quasi-neutrality condition. We find that electron pressure anisotropy is partially balanced by a field-aligned component of this polarization electric field. We propose a 2D model that describes a thin current sheet supported by currents of anisotropic electrons embedded in an ion-dominated current sheet. Current density profiles in our model agree well with THEMIS observations in the Earth's magnetotail.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗