Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “coupled system”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Feasibility study of a swept frequency electromagnetic probe (SWEEP) using inductive coupling for the determination of subsurface conductivity of the earth and water prospecting in arid regions

Techniques developed for electromagnetic probing of the lunar interior, and techniques developed for the generation of high power audio frequencies were combined to make practical a magnetic inductive coupling system for the rapid measurement of ground conductivity profiles which are helpful when prospecting for the presence and quality of subsurface water. A system which involves the measurement of the direction, intensity, and time phase of the magnetic field observed near the surface of the earth at a distance from a horizontal coil energized so as to create a field that penetrates the earth was designed and studied to deduce the conductivity and stratification of the subsurface. Theoretical studies and a rudimentary experiment in an arid region showed that the approach is conceptually valid and that this geophysical prospecting technique can be developed for the economical exploration of subterranean water resources.

Latorraca, G. A.↗
NASA NTRS1974

Interdiffusion behavior of tungsten or rhenium and group 5 and 6 elements and alloys of the periodic table. Part 2A: Appendices A-G

Arc cast W, CVD, W, CVD Re, and powder metallurgy Re materials were hot isostatically pressure welded to ten different refractory metals and alloys and thermally aged at 10 to the minus 8th power torr at 1200 C, 1500 C, 1630 C, 1800 C, and 2000 C for 100 hours to 2000 hours. Electron beam microprobe analysis was used to characterize the interdiffusion zone width of each couple system as a function of age time and temperature. Each system was least squares fitted to the equation: In (delta X sq/t) = B/T + A, where delta X is net interdiffusion zone width, t is age time, and T is age temperature. Detailed descriptions of experimental and analytical procedures utilized in conducting the experimental program are provided. For Vol. 1, see N74-34046.

Arcella, F. G.↗
NASA NTRS1974

Determination of the landing point and orientation of a spacecraft on Mars

Formulas are presented to calculate the landing point of a spacecraft on Mars. The areographic latitude is taken as the angle between a plumb line at the landing point and the plane perpendicular to the axis of rotation of Mars relative to the sun. The ephemeral time of the upper culmination of the sun at the landing point is used to determine areographic longitude. A coupled system and a topocentric system of coordinates are introduced to develop the first series of equations. Both errors which are independent random quantities and systematic errors are considered, as well as the influence of the distance of the landing point from the boundary of the area of polar night.

Mersov, G. A.↗
NASA NTRS1975

Prepared to launch

The verification of the interface between the preflight prepare-to-launch and flight program, targeting load, and flight program initialization was described. This is done using the digital command system coupled with a flight program patch and a memory dump command, the 6D/LVDC simulator, and a program trace through phase 1 initialization.

Source record↗
NASA NTRS1974

Status of JPL solar powered experiments for terrestrial applications

Results of an ongoing program set up to evaluate solar terrestrial photovoltaic power sources. The results of this program, which now includes a solar array encapsulant and materials test and a solar-powered buoy study, are updated, and the results of efforts to study the dynamic interaction of a solar photovoltaic array and a water electrolysis system coupled to produce hydrogen are reported for the first time.

Yasui, R. K.↗
NASA NTRS1975

Chemical potential effects on neutrino diffusion in supernovae

The validity of imposing a zero chemical potential for neutrinos in hydrodynamic calculations of collapsing supernovae is investigated in the diffusion approximation of neutrino transport. A coupled system of equations is solved for neutrino and energy diffusion fluxes as well as lepton diffusion in a collapsing supernovae ambient medium, and the results indicate a substantial growth in the neutrino chemical potential for densities greater than 10 to the 12th power gm/cu cm. The rate of energy transport is shown to be significantly affected by increases in Fermi integrals and chemical-potential gradients accompanied by decreases in temperature, and the extent of neutrino particle/antiparticle reactions is found also to affect energy diffusion rates. It is concluded that the photon-like behavior usually assumed for neutrinos may be incorrect and that an extension of the Sn transport approximation to include lepton characteristics is necessary for a definitive answer to the question of neutrino transport in supernovae.

Mazurek, T. J.↗
NASA NTRS1977

Transient excitation and mechanical admittance test techniques for prediction of payload vibration environments

Transient excitation forces were applied separately to simple beam-and-mass launch vehicle and payload models to develop complex admittance functions for the interface and other appropriate points on the structures. These measured admittances were then analytically combined by a matrix representation to obtain a description of the coupled system dynamic characteristics. Response of the payload model to excitation of the launch vehicle model was predicted and compared with results measured on the combined models. These results are also compared with results of earlier work in which a similar procedure was employed except that steady-state sinusoidal excitation techniques were included. It is found that the method employing transient tests produces results that are better overall than the steady state methods. Furthermore, the transient method requires far less time to implement, and provides far better resolution in the data. However, the data acquisition and handling problem is more complex for this method. It is concluded that the transient test and admittance matrix prediction method can be a valuable tool for development of payload vibration tests.

Kana, D. D.↗
NASA NTRS1977

The solar-terrestrial observatory as a major module of a space station

The solar-terrestrial environment is a dynamic, tightly coupled system in which variable solar energy is transmitted through electromagnetic radiation and the solar wind to the earth's magnetosphere and atmosphere. The constantly changing solar input and the continuous redistribution of energy near the earth combine to determine the characteristics of our global environment. An understanding and subsequent management of this environment will require a coordinated set of observations of solar processes and the accompanying magnetospheric and atmospheric responses. A major element in this observational plan should be a Solar-Terrestrial Observatory module of a manned Space Station in which instruments and experimental techniques developed during short-duration Spacelab flights will be applied to extended missions in both low-altitude and geosynchronous orbits.

Chappell, C. R.↗
NASA NTRS1978

Employing static excitation control and tie line reactance to stabilize wind turbine generators

An analytical representation of a wind turbine generator is presented which employs blade pitch angle feedback control. A mathematical model was formulated. With the functioning MOD-0 wind turbine serving as a practical case study, results of computer simulations of the model as applied to the problem of dynamic stability at rated load are also presented. The effect of the tower shadow was included in the input to the system. Different configurations of the drive train, and optimal values of the tie line reactance were used in the simulations. Computer results revealed that a static excitation control system coupled with optimal values of the tie line reactance would effectively reduce oscillations of the power output, without the use of a slip clutch.

Hwang, H. H.↗
NASA NTRS1980

Measuring coal thickness

Laboratory tested concept, for measuring thickness of overhead coal using noncontacting sensor system coupled to controller and high pressure water jet, allows mining machines to remove virtually all coal from mine roofs without danger of cutting into overlying rock.

Barker, C.↗
NASA NTRS1979

Middle atmosphere electrodynamics: Report of the Workshop on the Role of the Electrodynamics of the Middle Atmosphere on Solar Terrestrial Coupling

The middle atmosphere (MA), which is defined as the region bounded below by the tropopause near 10 km and above by the mesopause near 90 to 100 km, is regarded as a passive medium through which electric fields and currents are transmitted from sources above and below. A scientific background is given for: sources of MA electric fields; MA conductivity and currents; and MA plasma characteristics. Recommendations are given for research in MA electrodynamics in the following areas: (1) MA electrodynamical parameters; (2) models and supportive laboratory measurements; and (3) investigation of specific problems in the coupled systems.

Source record↗
NASA NTRS1979

U-2 water vapor burden observations through the tropopause

A U-2 aircraft provided a platform for an infrared radiometer inferring water vapor burdens associated with the Intertropical Convergence Zone. Flight altitudes were 16 to 23 km. The radiometer system, coupled with an algorithm to produce an inverse solution of the radiative transfer equation, resulted in an rms error of 20 percent in the inferred water vapor burden. A unique, bivariate solution including radiance and vertical temperature profiles produced an essentially real-time solution for the water vapor burden. Results of the July 1977 missions over the Canal Zone region between latitudes 7.5 degrees N and 11.0 degrees N are presented.

Kuhn, P. M.↗
NASA NTRS1978

Modal confidence factor in vibration testing

The theory and applications of a time domain modal test technique are presented. The method uses free decay of random responses from a structure under test to identify its modal characteristics namely, natural frequencies, damping factors, and mode shapes. The method can identify multimodal (highly coupled) systems and modes that have very small contribution in the responses. A method is presented to decrease the effects of high levels of noise in the data and thus improve the accuracy of identified parameters. This is accomplished using an oversized mathematical model. The concept of modal confidence factor (MCF) is developed. The MCF is a number calculated for every identified mode for a structure under test. The MCF varies from 0.000 for a distorted, nonlinear, or noise mode to 100.0 for a pure structural mode. The theory of the MCF is based on the correlation that exits between the modal deflection at a certain station and the modal deflection at the same station delayed in time. The theory and application of the MCF is illustrated by two experiments. The first experiment deals with simulated responses from a two degree of freedom system with 20 percent, 40 percent, and 100 percent noise added. The second experiment was run on a generalized payload model. The free decay response from the payload model contained about 22 percent noise.

Ibrahim, S. R.↗
NASA NTRS1980

Stress intensity factors in two bonded elastic layers containing cracks perpendicular to and on the interface. Part 1: Analysis

The basic crack problem which is essential for the study of subcritical crack propagation and fracture of layered structural materials is considered. Because of the apparent analytical difficulties, the problem is idealized as one of plane strain or plane stress. An additional simplifying assumption is made by restricting the formulation of the problem to crack geometries and loading conditions which have a plane of symmetry perpendicular to the interface. The general problem is formulated in terms of a coupled system of four integral equations. For each relevant crack configuration of practical interest, the singular behavior of the solution near and at the ends and points of intersection of the cracks is investigated and the related characteristic equations are obtained. The edge crack terminating at and crossing the interface, the T-shaped crack consisting of a broken layer and a delamination crack, the cross-shaped crack which consists of a delamination crack intersecting a crack which is perpendicular to the interface, and a delamination crack initiating from a stress-free boundary of the bonded layers are some of the practical crack geometries considered.

Lu, M. C.↗
NASA NTRS1980

Bifilar analysis users manual, volume 2

The digital computer program developed to study the vibration response of a coupled rotor/bifilar/airframe coupled system is described. The theoretical development of the rotor/airframe system equations of motion is provided. The fuselage and bifilar absorber equations of motion are discussed. The modular block approach used in the make-up of this computer program is described. The input data needed to run the rotor and bifilar absorber analyses is described. Sample output formats are presented and discussed. The results for four test cases, which use the major logic paths of the computer program, are presented. The overall program structure is discussed in detail. The FORTRAN subroutines are described in detail.

Cassarino, S. J.↗
NASA NTRS1980

A diagonal form of an implicit approximate-factorization algorithm with application to a two dimensional inlet

A modification of an implicit approximate-factorization finite-difference algorithm applied to the two dimensional Euler and Navier-Stokes equations in general curvilinear coordinates is presented for supersonic free stream flow about and through inlets. The modification transforms the coupled system of equations into an uncoupled diagonal form which requires less computation work. For steady-state applications the resulting diagonal algorithm retains the stability and accuracy characteristics of the original algorithm. Solutions are given for inviscid and laminar flow about a two dimensional wedge inlet configuration. Comparisons are made between computed results and exact theory.

Chaussee, D. S.↗
NASA NTRS1981

A diagonal form of an implicit approximate-factorization algorithm

A modification of an implicit approximate-factorization finite-difference algorithm applied to partial differential equations is presented. This algorithm is applied to the two- and three-dimensional Euler equations in general curvilinear coordinates. The modification transforms the coupled system of equations into an uncoupled diagonal form that requires less computational work. For steady-state applications, the resulting diagonal algorithm retains the stability and accuracy characteristics of the original algorithm. The diagonal algorithm reduces the storage requirement of the implicit solution process and therefore has an important effect on the application of implicit finite-difference schemes to vector processors. Results are presented for realistic two-dimensional transonic flow fields about airfoils. Computation costs are reduced to 24-34%.

Pulliam, T. H.↗