SEARCH · Engineering Papers

Results for “coronagraph”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

All sources NASA NTRS DOE OSTI

NASA NTRS2016

The Radial Speed-Expansion Speed Relation for Earth-Directed CMEs

Earth-directed coronal mass ejections (CMEs) are the main drivers of major geomagnetic storms. Therefore, a good estimate of the disturbance arrival time at Earth is required for space weather predictions. The STEREO and SOHO spacecraft were viewing the Sun in near quadrature during January 2010 to September 2012, providing a unique opportunity to study the radial speed (V (sub rad)) to expansion speed(V (sub exp)) relationship of Earth-directed CMEs. This relationship is useful in estimating the V (sub rad) of Earth-directed CMEs, when they are observed from Earth view only. We selected 19 Earth-directed CMEs observed by the Large Angle and Spectrometric Coronagraph (LASCO)/C3 coronagraph on SOHO and the Sun Earth Connection Coronal and Heliospheric Investigation (SECCHI)/COR2 coronagraph on STEREO during January 2010 to September 2012. We found that of the three tested geometric CME models the full ice-cream cone model of the CME describes best the V (sub rad) to V (sub exp) relationship, as suggested by earlier investigations. We also tested the prediction accuracy of the empirical shock arrival (ESA) model proposed by Gopalswamy et al.(2005a), while estimating the CME propagation speeds from the CME expansion speeds. If we use STEREO observations to estimate the CME width required to calculate the V (sub rad) from the V (sub exp) measurements, the mean absolute error (MAE) of the shock arrival times of the ESA model is 8.4 hours. If the LASCO measurements are used to estimate the CME width, the MAE still remains below 17 hours. Therefore, by using the simple V (sub rad) to V (sub exp) relationship to estimate the V (sub rad) of the Earth-directed CMEs, the ESA model is able to predict the shock arrival times with accuracy comparable to most other more complex models.

Makela, P.↗

NASA NTRS2015

Zernike Wavefront Sensor Modeling Development for LOWFS on WFIRST-AFTA

WFIRST-AFTA design makes use of an existing 2.4m telescope for direct imaging of exoplanets. To maintain the high contrast needed for the coronagraph, wavefront error (WFE) of the optical system needs to be continuously sensed and controlled. Low Order Wavefront Sensing (LOWFS) uses the rejected starlight from an immediate focal plane to sense wavefront changes (mostly thermally induced low order WFE) by combining the LOWFS mask (a phase plate located at the small center region with reflective layer) with the starlight rejection masks, i.e. Hybrid Lyot Coronagraph (HLC)'s occulter or Shaped Pupil Coronagraph (SPC)'s field stop. Zernike wavefront sensor (ZWFS) measures phase via the phase-contrast method and is known to be photon noise optimal for measuring low order aberrations. Recently, ZWFS was selected as the baseline LOWFS technology on WFIST/AFTA for its good sensitivity, accuracy, and its easy integration with the starlight rejection mask. In this paper, we review the theory of ZWFS operation, describe the ZWFS algorithm development, and summarize various numerical sensitivity studies on the sensor performance. In the end, the predicted sensor performance on SPC and HLC configurations are presented.

Zernike phase contrast↗

NASA NTRS2017

The CHARIS High-Contrast Integral-Field Spectrograph

One of the leading direct Imaging techniques, particularly in ground-based imaging, uses a coronagraphic system and integral field spectrograph (IFS). The Coronagraphic High Angular Resolution Imaging Spectrograph (CHARIS) is an IFS that has been built for the Subaru telescope. CHARIS has been delivered to the observatory and now sits behind the Subaru Coronagraphic Extreme Adaptive Optics (SCExAO) system. CHARIS has 'high' and 'low' resolution operating modes. The "high-resolution" mode is used to characterize targets in J, H, and K bands at ~R70. The "low-resolution" prism is meant for discovery and spans J+H+K bands (1.15-2.37 microns) with a spectral resolution of ~R18. This discovery mode has already proven better than 15-sigma detections of HR8799c,d,e when combining ADI+SDI. Using SDI alone, planets c and d have been detected in a single 24 second image. The CHARIS team is optimizing instrument performance and refining ADI+SDI recombination to maximize our contrast detection limit. In addition to the new observing modes, CHARIS has demonstrated a design with high robustness to spectral crosstalk. CHARIS is in the final stages of commissioning, with the instrument open for science observations beginning February 2017. Here we review the science case, design, on-sky performance, engineering observations of exoplanet and disk targets, and specific lessons learned for extremely high contrast imagers. Key design aspects that will be demonstrated are crosstalk optimization, wavefront correction using the IFS image, lenslet tolerancing, the required spectral resolution to fit exoplanet atmospheres, and the utility of the spectrum in achieving higher contrast detection limits.

Groff, Tyler D.↗

NASA NTRS2018

The IFS for WFIRST CGI: Science Requirements to Design

Direct Imaging of exoplanets using a coronagraph has become a major field of research both on the ground and in space. Key to the science of direct imaging is the spectroscopic capabilities of the instrument, our ability to extract spectra, and measure the abundance of molecular species such as Methane. To take these spectra, the WFIRST coronagraph instrument (CGI) uses an integral field spectrograph (IFS), which encodes the spectrum into a two-dimensional image on the detector. This results in more efficient detection and characterization of targets, and the spectral information is critical to achieving detection limits below the speckle floor of the imager. The CGI IFS operates in two18% bands spanning 600nm to 840nm at a nominal spectral resolution of R50. We present the current science and engineering requirements for the IFS design, the instrument design, anticipated performance, and how the calibration is integrated into the focal plane wavefront control algorithms. We also highlight the role of the Prototype Imaging Spectrograph for Coronagraphic Exoplanet Studies (PISCES) at the JPL High Contrast Imaging Testbed to demonstrate performance and validate calibration methodologies for the flight instrument.

Groff, Tyler D.↗

NASA NTRS2018

A Small Satellite Mission for Solar Coronagraphy

We present on a concept study of the Goddard Miniature Coronagraph (GMC) mission for measuring the plasma flow in the solar corona in the form of solar wind and coronal mass ejections (CMEs). These mass flows can dramatically alter the near-Earth space environment to hazardous conditions posing danger to human technology in space. The primary science objective of the mission is to measure the properties of CMEs, coronal structures, and the solar wind near the Sun. The miniaturization of the coronagraph involves using a single-stage optics and a polarization camera, both of which reduce the size of the coronagraph. GMC will be accommodated in a small satellite that can be built with CubeSat material to minimize cost. The development of the Dellingr mission at NASA/GSFC has provided expertise and a clear pathway to build the GMC mission. The hardware and software used for the Dellingr (a name derived from the god of the dawn in Norse mythology) Mission are technically sound, so the GMC mission can be fully defined. Software, pointing, control and communications systems developed for GSFC CubeSats can be readily adapted to cut costs. We present orbit options such as an ISS (International Space Station) orbit or a Sun-synchronous dawn-dusk polar orbit with the aim of maximizing solar observations.

Gopalswamy, N.↗

NASA NTRS2017

Shaped Pupil Coronagraphy for WFIRST: High-Contrast Broadband Testbed Demonstration

The Shaped Pupil Coronagraph (SPC) is one of the two operating modes of the WFIRST (Wide-Field InfraRed Survey Telescope) coronagraph instrument. The SPC provides starlight suppression in a pair of wedge-shaped regions over an 18 percent bandpass, and is well suited for spectroscopy of known exoplanets. To demonstrate this starlight suppression in the presence of expected on-orbit input wavefront disturbances, we have recently built a dynamic testbed at JPL (Jet Propulsion Lab.) analogous to the WFIRST fight instrument architecture, with both Hybrid Lyot Coronagraph (HLC) and SPC architectures and a Low Order Wavefront Sensing and Control (LOWFS/C) subsystem to apply, sense, and correct dynamic wavefront disturbances. We present our best up-to-date results of the static SPC mode demonstration from the testbed, along with model comparisons and performance under realistic dynamical conditions. HLC results will be reported separately.

Cady, Eric↗

NASA NTRS2019

Design and Modeling of the Off-Axis Parabolic Deformable (OPD) Mirror Laboratory

Coronagraph-equipped direct imaging missions need an active wavefront control system to cancel out the optical aberrations that degrade the performance of the coronagraphs. A fast steering mirror is used to control Line-of-Sight (LoS) pointing error caused by the telescope jitter. In addition to controlling other low-order aberrations such as astigmatism and coma, high stroke, high actuator density deformable mirrors (DMs) are also used to control the electric field at the required high spatial frequencies. We are designing a testbed to verify a different deformable architecture, where the powered optic in the optical train are controllable and have lower actuator count compared to the existing DMs with flat nominal surfaces. This simplifies the packaging issue for space missions and reduces both cost and risk of having the entire coronagraph instrument's performance depending on one or two high-actuator count DMs. The testbed would also be capable of testing different low-order wavefront sensing algorithms, which focuses in the near-term on a new adaptive Kalman filtering and gradient decent method to estimate the harmonic LoS errors that affect space telescopes. In long run, we would test different machine learning techniques to estimate low-order aberrations and non-linear algorithms for digging the region of high contrast called the dark holes (DH).

Subedi, Hari↗

NASA NTRS2019

Design and Modeling of the Off-Axis Parabolic Deformable Mirror Laboratory

Communication↗

NASA NTRS2019

Demonstration of Multi-Star Wavefront Control for WFIRST, Habex, and LUVOIR

Coronagraphic instruments will enable direct imaging of dim planetary companions around nearby stars. The majority of nearby FGK stars are located in multi-star systems, including the Alpha Centauri stars, which may represent the best quality targets available for spectroscopic characterization due to their proximity and brightness. However, a binary system exhibits additional leakage from the o -axis companion star that may be brighter than the target exoplanet. Multi-Star Wavefront Control (MSWC) is a wavefront-control technique that allows simultaneous suppression of starlight of both stars in a binary system. MSWC would thus enable direct imaging of circumstellar planets in binary star systems such as Alpha Centauri. MSWC is compatible with a wide suite of planned coronagraphic instruments for future space missions. As part of the technology demonstration e orts for MSWC, the rst milestone results are presented here demonstrating (via computer simulations), high-contrast imaging capabilities of multi-star systems for several instruments including: [1] the upcoming WFIRST and its CGI demonstrator, [2] the HABitable Worlds EXplorer (Habex) mission concept, [3] the segmented Large UV/Optical/IR (LUVOIR) mission concept, and [4] a small-aperture Alpha Centauri direct-imager mission concept. For each of these missions, a baseline coronagraph option planned for the mission will be adopted and instrument baseline performance will be compared for single-star wavefront control.

Sirbu, Dan↗

NASA NTRS2017

Narrowband Rejection of Reaction Wheel and Environmental Disturbances for the WFIRST OMC Testbed

The Wide Field Infrared Survey Telescope (WFIRST) is a NASA observatory with two scientific instruments. The first is the Wide Field Instrument (WFI) designed to perform wide field imaging and surveys of the near infrared (NIR) sky. The second is a coronagraph (CGI) that will enable astronomers to detect and measure properties of planets in other solar systems. The coronagraph requires 0.5 milli-arcsecond (mas) RMS pointing per axis of the line of sight (LOS) to achieve a contrast of 1x10-9. This paper discusses the approach used for achieving this level of pointing performance on the occulting mask coronagraph (OMC) testbed at JPL. This testbed uses a low-order wavefront sensing (LOWFS) camera and fast steering mirror (FSM) to suppress injected LOS jitter and environmental LOS jitter. The injected jitter includes representative broadband spacecraft attitude control system (ACS) LOS motion and tonal LOS jitter caused by the reaction wheel assemblies (RWA). The environmental jitter includes thermal LOS variations and harmonics of the line noise. The LOWFS camera uses high flux from the obscured science target to achieve high rate measurements of the LOS. These measurements are augmented with fictitious RWA tachometer information and an estimate of the line noise frequency. A LOS servo using a combination of feedback and feedforward control is used in the testbed to compensate for all of the disturbance sources and to mitigate jitter caused by in-band camera noise. The feedforward uses a novel robust least mean squares (RLMS) filter algorithm to reject the RWA and line frequency tones. High fidelity models of the sensors, disturbances and actuator are presented in this paper. These models were developed as part of a simulation of the LOS control system. Performance results from the hardware testbed at the Jet Propulsion Laboratory (JPL) are discussed in this paper.

Shields, Joel↗

NASA NTRS2017

Wavefront sensing for a future HabEx space telescope.

HabEx is a concept study for a next generation space telescope having a 4 to 6.5 m primary mirror diameter. Primarily designed for exoplanet science, but also carrying general astrophysics instruments, it will have stability requirements orders of magnitude more stringent than any previously flown space-based observatory. Wavefront control, including active sensing/control of wavefront jitter and drift, will be essential to achieving and maintaining coronagraph performance. There are currently two complementary techniques that can be used to sense the wavefront drift. An attractive method is to use starlight rejected from the coronagraph to sense changes in the wavefront incident on the coronagraph mask. This method suffers from photon noise especially when imaging dim stars. It is also unavailable during slews between target stars. Laser metrology is a complementary system in which a laser “truss” enables rigid body displacements of the optics to be measured from changes in the separation of pairs of optical fiducials which can be separated by many meters. In closed loop with actuated optics, laser metrology actively maintains rigid body alignment of the front-end optics, thereby eliminating the dominant source of wavefront drift. This method can maintain rigid body stability of the telescope optics and thereby wavefront control, even during slews between targets.

Martin, Stefan↗

NASA NTRS2018

HabEx Space Telescope Guiding Systems

The HabEx (Habitable Exoplanet Imaging Mission) study is developing concepts for a next generation space telescope operating from the ultraviolet to the infrared. HabEx is making exoplanet science the primary mission objective and adding two secondary payload instruments for general astrophysics, including ultraviolet spectroscopy. For exoplanet work, two approaches are being developed. The first is a coronagraph with two separate channels to cover a broad spectral range from 450 nm to 1000 nm in two observations. The second is a starshade to cover the band 300 nm to 1000 nm in a single observation. These instruments are complementary; the coronagraph can make rapid survey observations while the starshade can reach closer in to the star and once on target, enables more efficient spectroscopic observations. This paper describes some of the key design considerations necessary to enable coronagraph and starshade observations.

Shaklan, Stuart↗

NASA NTRS2018

Laser Metrology for Ultra-Stable Space-Based Coronographs

Sensing starlight rejected from a coronagraph is essential in stabilizing the telescope pointing and wavefront drift, but performance is degraded for dim stars. Laser Metrology (MET) provides a different, complementary sensing method, one that can be used to measure changes in the alignment of the optics at high bandwidth, independent of the magnitude of the host star. Laser metrology measures changes in the separation of optical fiducial pairs, which can be separated by many meters. The principle of operations is similar to the laser metrology system used in LISA-Pathfinder to measure the in-orbit displacement between two test masses to a precision of ~10 picometers. In closed loop with actuators, MET actively maintains rigid body alignment of the front-end optics, thereby eliminating the dominant source of wavefront drift. In the case of a segmented, active primary mirror, MET provides six degrees of freedom sensing, replacing edge sensors. MET maintains wavefront control even during attitude maneuvers, such as slews between target stars, thereby avoiding the need to repeat time-consuming speckle suppression. These features can significantly improve the performance and observational efficiency of future large-aperture space telescopes equipped with internal coronagraphs. We evaluate MET trusses for various proposed monolithic and segmented space-based coronagraphs and present the performance requirements necessary to maintain contrast drift below 10^-11.

Moore, Dustin↗

NASA NTRS2018

HabEx Space Telescope Exoplanet Instruments

The HabEx (Habitable Exoplanet) space telescope mission concept carries two complementary optical systems as part of its baseline design, a coronagraph and a starshade, that are designed to detect and characterize planetary systems around nearby stars. The starshade is an external occulter which would be 72 m in diameter and fly some 124,000 km ahead of the telescope. A starshade instrument on board the telescope enables formation flying to maintain the starshade within 1 m of the line of sight to the star. The starshade instrument has various modes, including imaging from the near UV through to the near infrared and integral field spectroscopy in the visible band. The coronagraph would provide imaging and integral field spectroscopy in the visible band and would reach out to 1800 nm for low resolution spectroscopy in the near infrared. To provide the necessary stability for the coronagraph, the telescope would be equipped with a laser metrology system allowing measurement and control of the relative positions of the principal mirrors. In addition, a fine guidance sensor is needed for precision attitude control. The requirements for telescope stability for coronagraphy are discussed. The design and requirements on the starshade will also be discussed.

Marchen, Luis↗

NASA NTRSDate not supplied

From the Solar Limb and Out: Results from the Wide-Field EUV Image Campaigns with GOES/SUVI

Traditional approaches to tracking solar outflows for space weather forecasting rely primarily on coronagraph images, which generally observe the solar corona above a minimum height of about 2.5 solar radii. EUV images have been widely used to characterize features on the solar disk, but the limited fields of view of most current EUV imagers have prevented their use for tracking outflows through the inner and middle coronae. A series of off-point campaigns with the GOES 16-18 Solar Ultraviolet Imager (SUVI) between 2018 and 2022 from three Flight Models have provided an opportunity to assess the value of extended EUV images for space weather forecasting applications. These new results demonstrate that wide field-of-view EUV images are useful for characterizing the early onset of eruptive events and tracking smaller outflow into the solar wind. They also reveal the origins of shocks that are known to accelerate particles and drive solar energetic particle (SEP) events. Because CMEs generally experience the bulk of their acceleration below the height of white light coronagraphic observations, these images provide information about the origins of these events that has not been available traditionally. Together with coronagraphic measurements, EUV images provide the continuous views needed to connect CMEs back to their source regions. Here, we present these new SUVI observations and discuss their potential use in space weather operations.

SUVI↗

NASA NTRS2021

Exep: Environmental Testing of High-Actuator-Count Mems Deformable Mirrors for Space-Based Applications

Coronagraph instruments on future space telescopes will rely on deformable mirrors to create high contrast images for the direct detection of exoplanets. As part of the NASA Exoplanet Explorations Program’s coronagraph technology development efforts, two sets of Micro-electro-mechanical systems (MEMS) deformable mirrors manufactured by Boston Micromachines Corporation were exposed to vibration and thermal cycles representative of launch conditions. The first set were 952-actuator Kilo-DMs that successfully demonstrated 100% actuator survival and achieved ~1e-8 contrast after the environment test. The second round used an engineering-grade 2048-actuator deformable mirror on which few changes were identified after the environmental test. However, each actuator that changed behavior was flagged as anomalous beforehand or was directly adjacent to a defective actuator. From this result, we hypothesized that typical actuators on a science grade deformable mirror are robust to environmental testing. A third set of 2048-actuator deformable mirror have been procured for a planned test to characterize the deformable mirrors using interferometric measurements, contrast results on a new in-air coronagraph testbed, and infrared microscopy on the internal structure of the MEMS devices.

Lam, Charlie↗

NASA NTRS2021

Deriving Deformable Mirror Performance Requirements in Simulation with Experimental Verification

Coronagraph instruments rely on predictable and stable deformable mirror (DM) surface displacement to achieve the contrast required to detect Earth-sized exoplanets orbiting nearby Solar-type stars. Anomalous DM behavior, such as unstable or pinned actuators, can limit contrast in coronagraphs. Simulating how these undesired behaviors affect the performance of a high contrast imaging architecture is important for developing requirements on their associated hardware. Simulating a vortex coronagraph (VC) with two deformable mirrors, this study quantifies how the number of pinned actuators affect the performance of Focal Plane Wavefront Sensing and Control algorithms using both Grid Search Electric Field Conjugation (EFC) and Planned EFC, which uses Beta-Bumping. The simulation also quantifies how various types of voltage noise such as zero-mean Gaussian noise, zero-mean periodic noise, and drift can affect the contrast of a VC during an observation run. A tolerance of a change in the Mean Normalized Intensity of ${1\times10^{-11}}$ is allocated to both types of error. If Planned EFC is used, only 1 pinned actuator on both DMs can be tolerated. If only pure Grid Search EFC is used the DMs cannot have any pinned actuators. For the case of zero-mean Gaussian noise and zero-mean periodic noise, one can tolerate a noise standard deviation of no more than ${\sigma = 0.45 \text{ mV}}$. For drift, we can only tolerate ${\sigma = 0.30 \text{ mV}}$ or less. These results show that the DM electronics and the DM themselves need to be nearly defect free to avoid having more than 1 pinned actuator. The electronics need to be tested for different types of noise statistics and that both the average and standard deviation of the noise should be measured.

Dean L. Palmer↗

NASA NTRS2024

Observations of the Polarized Solar Corona During the Annular Eclipse of 14 October 2023

We present results of a dual eclipse expedition to observe the solar corona from two sites during the annular solar eclipse of 14 October 2023 using a novel coronagraph designed to be accessible for amateurs and students to build and deploy. The coronagraph (CATEcor) builds on the standardized eclipse observing equipment developed for the Citizen CATE 2024 experiment. The observing sites were selected for likelihood of clear observations, for historic relevance (near the Climax site in the Colorado Rocky Mountains), and for centrality to the annular eclipse path (atop Sandia Peak above Albuquerque, New Mexico). The novel portion of CATEcor is an external occulter assembly that slips over the front of a conventional dioptric telescope, forming a shaded-truss externally occulted coronagraph. CATEcor is specifically designed to be easily constructed in a garage or “makerspace” environment. We successfully observed some bright features in the solar corona to an altitude of approximately 2.25 R during the annular phases of the eclipse. Future improvements to the design, in progress now, will reduce both stray light and image artifacts; our objective is to develop a design that can be operated successfully by amateur astronomers at sufficient altitude even without the darkened skies of a partial or annular eclipse.

Solar instrumentation↗