Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “condensed phase systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Geometric pumping and dephasing at topological phase transition

A measure-preserving formalism (MPF) is constructed and applied to spin/band models, which yield observations about pumping. It occurs at the topological phase transition, i.e., a Z 2 flip, suggesting that Z 2 can imply bulk effects. The model's asymptotic behavior is analytically solved via MPF. The pumping probability is geometric, fractional, and has a ceiling of $\frac{1}{2}$. Intriguingly, theorems are proved about occurrence conditions, which are linked to the system's dimension and the distinction between rational and irrational numbers. Finally, experimental detection is discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

X-ray diffraction and equation of state of the C–S–H room-temperature superconductor

X-ray diffraction indicates that the structure of the recently discovered carbonaceous sulfur hydride (C–S–H) room-temperature superconductor is derived from previously established van der Waals compounds found in the H 2 S–H 2 and CH 4 –H 2 systems. Crystals of the superconducting phase were produced by a photochemical synthesis technique, leading to the superconducting critical temperature T c of 288 K at 267 GPa. X-ray diffraction patterns measured from 124 to 178 GPa, within the pressure range of the superconducting phase, are consistent with an orthorhombic structure derived from the Al 2 Cu-type determined for (H 2 S) 2 H 2 and (CH 4 ) 2 H 2 that differs from those predicted and observed for the S–H system at these pressures. The formation and stability of the C–S–H compound can be understood in terms of the close similarity in effective volumes of the H 2 S and CH 4 components, and denser carbon-bearing S–H phases may form at higher pressures. Furthermore, the results are crucial for understanding the very high superconducting T c found in the C–S–H system at megabar pressures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Magic-angle semimetals with chiral symmetry

Here, we construct and solve a two-dimensional, chirally symmetric model of Dirac cones subjected to a quasiperiodic modulation. In real space, this is realized with a quasiperiodic hopping term. This hopping model, as we show, at the Dirac node energy has a rich phase diagram with a semimetal-to-metal phase transition at intermediate amplitude of the quasiperiodic modulation, and a transition to a phase with a diverging density of states (DOS) and subdiffusive transport when the quasiperiodic hopping is strongest. We further demonstrate that the semimetal-to-metal phase transition can be characterized by the multifractal structure of eigenstates in momentum space and can be considered as a unique “unfreezing” transition. This unfreezing transition in momentum space generates flat bands with a dramatically renormalized bandwidth in the metallic phase similar to the phenomena of the band structure of twisted bilayer graphene at the magic angle. We characterize the nature of this transition numerically as well as analytically in terms of the formation of a band of topological zero modes. For pure quasiperiodic hopping, we provide strong numerical evidence that the low-energy DOS develops a divergence and the eigenstates exhibit Chalker (quantum-critical) scaling despite the model not being random. At particular commensurate limits the model realizes higher-order topological insulating phases. We discuss how these systems can be realized in experiments on ultracold atoms and metamaterials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS2023

Changing Characteristics of Tropical Extreme Precipitation-Cloud Regimes in Warmer Climates

In this paper, we have investigated the changing characteristics of climatic scale (monthly) tropical extreme precipitation in warming climates using the Energy Exascale Earth System Model (E3SM). Results are from Atmospheric Model Intercomparison Project (AMIP)-type simulations driven by a) control experiment with present-day sea surface temperature (SST) and CO 2 concentration, b) P4K, same as in a) but with uniform increase by 4K in SST globally, and c) same as in a), but with imposed SST and CO 2 concentration from outputs of coupled E3SM forced by 4xCO 2 concentration. We find that as the surface warms under P4K and 4xCO 2 , both convective and stratiform rain increase. Importantly, there is increasing fractional contribution of stratiform rain as a function of precipitation intensity, with the most extreme but rare events occurring preferentially over land more than ocean, more so under 4xCO 2 than P4K. Extreme precipitation is facilitated by increased precipitation efficiency, reflecting accelerated rates of recycling of precipitation-cloud water (both liquid and ice phases) in regions with colder anvil cloud tops. Changes in vertical profiles of clouds, condensation heating and vertical motions indicate increasing precipitation-cloud-circulation organization from control, P4K to 4xCO 2 . Results suggest that large-scale ocean warming, i.e., P4K, is the primary cause contributing to organization structure resembling the well-known Mesoscale Convective System (MCS) for increased extreme precipitation on shorter (hourly to daily) time scales. Additional 4xCO 2 atmospheric radiative heating, and dynamically consistent anomalous SST further amplifies the MCS organization under P4K. Analyses of the surface moist static energy distribution show that increase in surface moisture (temperature) under P4K and 4xCO 2 is the key driver leading to enhanced convective instability over tropical ocean (land). However, the fast and large increase in land surface temperature and lack of available local moisture result in strong reduction in land surface relative humidity, reflecting severe drying and enhanced convective inhibition (CIN). It is argued that very extreme and rare “record-breaking” precipitation events found over land under P4K, more so under 4xCO 2 , are likely due to the delayed onset of deep convection, i.e., the longer the suppression of deep convection by CIN, the more severe the extreme precipitation when eventually occur, due to the release of large amount of stored surplus convective available potential energy in the lower troposphere during prolonged CIN.

climate-scale extreme tropical precipitation↗
DOE OSTI2021

The Li–F–H ternary system at high pressures

Evolutionary crystal structure prediction searches have been employed to explore the ternary Li-F-H system at 300 GPa. Metastable phases were uncovered within the static lattice approximation, with LiF 3 H 2 , LiF 2 H, Li 3 F 4 H, LiF 4 H 4 , Li 2 F 3 H and LiF 3 H lying within 50 meV/atom of the 0 K convex hull. All of these phases contain H n F¯ n+1 (n = 1; 2) anions, and Li + cations. Other structural motifs such as LiF slabs, $H$ $^{+}_{3}$ molecules and F δ- ions are present in some of the low enthalpy Li-F-H structures. The bonding within the H n F¯ n+1 molecules, which may be bent or linear, symmetric or asymmetric, is analyzed. The five phases closest to the hull are insulators, while LiF 3 H is metallic and predicted to have a vanishingly small superconducting critical temperature. Li 3 F 4 H is predicted to be stable at zero pressure. Furthermore, this study lays the foundation for future investigations of the role of temperature and anharmonicity on the stability and properties of compounds and alloys in the Li-F-H ternary system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Nonequilibrium DMFT + CPA for correlated disordered systems

We present a solution for the nonequilibrium dynamics of an interacting disordered system. The approach adapts the combination of the equilibrium dynamical mean-field theory and the equilibrium coherent potential approximation methods to the nonequilibrium many-body formalism, using the Kadanoff-Baym-Keldysh complex time contour, for the dynamics of interacting disordered systems away from equilibrium. We use our time domain solution to obtain the equilibrium density of states of the disordered interacting system described by the Anderson-Hubbard model, bypassing the necessity for the cumbersome analytical continuation process. We further apply the nonequilibrium solution to the interaction quench problem for an isolated disordered system. Here, the interaction is abruptly changed from zero (noninteracting system) to another constant (finite) value at which it is subsequently kept. We observe via the time dependence of the potential, kinetic, and total energies the effect of disorder on the relaxation of the system as a function of final interaction strength. Finally, the real-time approach has the potential to shed light on the fundamental role of disorder in the nonequilibrium dynamics of interacting quantum systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Photon-Instanton Collider Implemented by a Superconducting Circuit

Instantons, spacetime-localized quantum field tunneling events, are ubiquitous in correlated condensed matter and high-energy systems. However, their direct observation through collisions with conventional particles has not been considered possible. We show how recent advances in circuit quantum electrodynamics, specifically, the realization of galvanic coupling of a transmon qubit to a high-impedance transmission line, allows the observation of inelastic collisions of single microwave photons with instantons (phase slips). We develop a formalism for calculating the photon-instanton cross section, which should be useful in other quantum field theoretical contexts. In particular, we show that the inelastic scattering probability can significantly exceed the effect of conventional Josephson quartic anharmonicity and reach order-unity values.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Kibble–Zurek mechanism of Ising domains

The formation of topological defects after a symmetry-breaking phase transition is an overarching phenomenon that encodes the underlying dynamics. The Kibble-Zurek mechanism (KZM) describes these non-equilibrium dynamics of second-order phase transitions and predicts a power-law relationship between the cooling rates and the density of topological defects. It has been verified as a successful model in a wide variety of physical systems, including structure formation in the early Universe and condensed-matter materials. However, it is uncertain if the KZM mechanism is also valid for topologically trivial Ising domains, one of the most common and fundamental types of domain in condensed-matter systems. Here we show that the cooling rate dependence of Ising domain density follows the KZM power law in two different three-dimensional structural Ising domains: ferro-rotation domains in NiTiO 3 and polar domains in BiTeI. However, although the KZM slope of NiTiO 3 agrees with the prediction of the 3D Ising model, the KZM slope of BiTeI exceeds the theoretical limit, providing an example of steepening KZM slope with long-range dipolar interactions. Finally, our results demonstrate the validity of KZM for Ising domains and reveal an enhancement of the power-law exponent for transitions of non-topological quantities with long-range interactions. The Kibble-Zurek mechanism is shown to apply to structural Ising domains in three-dimensional materials. Long-range interactions modify the critical exponents away from theoretical predictions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Quantum magnetism on small-world networks

While classical spin systems in random networks have been intensively studied, much less is known about quantum magnets in random graphs. In this work, we investigate interacting quantum spins on small-world networks, building on mean-field theory and extensive quantum Monte Carlo simulations. Starting from one-dimensional (1D) rings, we consider two situations: All-to-all interacting and long-range interactions randomly added. The effective infinite dimension of the lattice leads to a magnetic ordering at finite temperature Tc with mean-field criticality. Nevertheless, in contrast to the classical case, we find two distinct power-law behaviors for Tc versus the average strength of the extra couplings. This is controlled by a competition between a characteristic length scale of the random graph and the thermal correlation length of the underlying 1D system, thus challenging mean-field theories. We also investigate the fate of a gapped 1D spin chain against the small-world effect.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Orbital and spin character of doped carriers in infinite-layer nickelates

The recent discovery of superconductivity in Nd1-xSrxNiO2 has drawn significant attention in the field. A key open question regards the evolution of the electronic structure with respect to hole doping. Here we exploit x-ray absorption spectroscopy (XAS) and resonant inelastic x-ray scattering (RIXS) to probe the doping-dependent electronic structure of Nd1-xSrxNiO2. Upon doping, a high-energy feature in Ni L3-edge XAS develops in addition to the main absorption peak, while XAS at the O K-, Nd M3- and Nd M5-edge exhibits a much weaker response. This implies that doped holes are mainly introduced into Ni 3d states. By comparing our data to atomic multiplet calculations including D4h crystal field, the doping-induced feature in Ni L3-edge XAS is consistent with a d8 spin-singlet state in which doped holes reside in the 3dx2-y2 orbitals. This is further supported by the softening of RIXS orbital excitations due to doping, corroborating with the Fermi level shift associated with increasing holes in the Ni 3dx2-y2 orbital.

2-dimensional systems↗
DOE OSTI2022

Itinerant G-type antiferromagnet SrCr 2 As 2 studied by magnetization, heat capacity, electrical resistivity, and NMR measurements

Here, the physical properties of itinerant antiferromagnetic (AFM) SrCr 2 As 2 with body-centered tetragonal ThCr 2 Si 2 structure were investigated in single crystalline and polycrystalline forms by electrical resistivity ρ, heat capacity C p , magnetic susceptibility χ versus temperature T, and magnetization M versus applied magnetic field H isotherm measurements as well as 75 As and 53 Cr nuclear magnetic resonance (NMR) measurements in the wide temperature range T = 1.6–900 K. From the χ(T) and 75 As NMR measurements, the G-type AFM state below T N = 615(15) K has been determined, consistent with the previous neutron-diffraction measurements. Direct evidence of magnetic ordering of the Cr spins was shown by the observation of the 53 Cr NMR spectrum under H = 0. From the χ( T) measurements on single-crystal SrCr 2 As 2 under the two different magnetic field directions H|| ab and H || c in the AFM state, the Cr ordered moments are shown to align along the c axis in the G-type AFM state. The metallic state is directly evidenced by the ρ, C p , and NMR measurements, and the density of states at the Fermi energy $\mathscr{D}$(E F ) in the AFM state is estimated to be 7.53 states/eV f.u. for both spin directions which is almost twice the bare $\mathscr{D}$(E F ) estimated from first-principles calculations, suggesting an enhancement of the conduction-carrier mass by a factor of two in the AFM state. The $\mathscr{D}$(E F ) is found to be nearly constant below at least 100 K and is independent of H. The ρ(T) is found to show T-linear behavior above T N and exhibits positive curvature below T N where significant loss of spin-disorder scattering upon magnetic ordering is observed. The resistivity anisotropy of the compound remains moderate ρ c /ρ a ~ 9 through most of the magnetically ordered phase but shows a rapid increase below 50 K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Ground state of Ce 3 Bi 4 Pd 3 unraveled by hydrostatic pressure

Noncentrosymmetric Ce 3 Bi 4 Pd 3 has attracted a lot of attention as a candidate for strongly correlated topological material, yet its experimental ground state remains a matter of contention. Two conflicting scenarios have emerged from a comparison to the prototypical Kondo insulator Ce 3 Bi 4 Pd 3 : Either Ce 3 Bi 4 Pd 3 is a spin-orbit-driven topological semimetal or a Kondo insulator with smaller Kondo coupling than its Pt counterpart. Here, we determine the ground state of Ce 3 Bi 4 Pd 3 via electrical resistivity measurements under hydrostatic pressure, which is a clean symmetry-preserving tuning parameter that increases hybridization but virtually preserves spin-orbit coupling. Ce 3 Bi 4 Pd 3 becomes more insulating under pressures up to 2.3 GPa, which is a signature of Ce-based Kondo insulating materials in the considered pressure range. Its small zero-pressure gap increases quadratically with pressure, similar to the behavior observed in the series Ce 3 Bi 4 (Pt 1 - x Pd x ) 3 , which indicates that Pt substitution and applied pressure have a similar effect. Finally, our result not only demonstrates that Kondo coupling, rather than spin-orbit coupling, is the main tuning parameter in this class of materials, but it also establishes that Ce 3 Bi 4 Pd 3 has a narrow-gap Kondo insulating ground state.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Optically Probing Tunable Band Topology in Atomic Monolayers

In many atomically thin materials, their optical absorption is dominated by excitonic transitions. It was recently found that optical selection rules in these materials are influenced by the band topology near the valleys. We propose that gate-controlled band ordering in a single atomic monolayer, through changes in the valley winding number and excitonic transitions, can be probed in helicity-resolved absorption and photoluminescence. Here, this predicted tunable band topology is confirmed by combining an effective Hamiltonian and a Bethe-Salpeter equation for an accurate description of excitons, with first-principles calculations suggesting its realization in Sb-based monolayers.

2-dimensional systems↗
NASA NTRS1988

SRB combustion dynamics analysis computer program (CDA-1)

A two-dimensional numerical model is developed for the unsteady oscillatory combustion of the solid propellant flame zone. Variations of pressure with low and high frequency responses across the long flame, such as in the double-base propellants, are accommodated. The formulation is based on a premixed, laminar flame with a one-step overall chemical reaction and the Arrhenius law of decomposition for the gaseous phase with no condensed phase reaction. Numerical calculations are carried out using the Galerkin finite elements, with perturbations expanded to the zeroth, first, and second orders. The numerical results indicate that amplification of oscillatory motions does indeed prevail in high frequency regions. For the second order system, the trend is similar to the first order system for low frequencies, but instabilities may appear at frequencies lower than those of the first order system. The most significant effect of the second order system is that the admittance is extremely oscillatory between moderately high frequency ranges.

Chung, T. J.↗
NASA NTRS1991

Transient nucleation in glasses

Nucleation rates in condensed systems are frequently not at their steady state values. Such time dependent (or transient) nucleation is most clearly observed in devitrification studies of metallic and silicate glasses. The origin of transient nucleation and its role in the formation and stability of desired phases and microstructures are discussed. Numerical models of nucleation in isothermal and nonisothermal situations, based on the coupled differential equations describing cluster evolution within the classical theory, are presented. The importance of transient nucleation in glass formation and crystallization is discussed.

Kelton, K. F.↗
NASA NTRS1999

Analysis of MIR Condensate and Potable Water

Approximately fifty percent of the potable water supplied to the Russian cosmonauts, American astronauts, and other occupants of the current Russian Mir Space Station is produced by the direct recycle of water from humidity condensate. The remainder comes from ground supplied potable water that is delivered on a Progress resupply spacecraft, or processed fuel cell water transferred from the Shuttle. Reclamation of water for potable and hygiene purposes is considered essential for extended duration missions in order to avoid massive costs associated with resupplying water from the ground. The Joint U.S/Russian Phase 1 program provided the U.S. the first opportunity to evaluate the performance of water reclamation hardware in microgravity. During the Phase I program, the U.S. collected recycled water, stored water, and humidity condensate samples for chemical and microbial evaluation. This experiment was conducted to determine the potability of the water supplied on Mir, to assess the reliability of the water reclamation and distribution systems, and to aid in developing water quality monitoring standards for International Space Station.

Pierre, L. M.↗
DOE OSTI2024

Improvement of Coal Power Plant Dry Cooling Technology through Application of Cold Thermal Energy Storage

The U.S. power infrastructure is currently heavily reliant on water cooling. The power plants in the U.S. account for approximately 40% of freshwater withdrawals, with 90% of it used in condenser cooling. The most used cooling technology in coal-fired power plants is a once-through condenser; however, this cooling method requires high water withdrawal rates and results in thermal pollution of the water source. Wet WCTs offer an alternative to once-through condensers due to much lower water withdrawals. However, these systems suffer from water consumption through evaporation making them undesirable options in areas subject to droughts and in arid areas. The direct dry cooled condensers (ACCs) and dry cooling towers (DCT) account for 1.8%, hybrid cooling (ACC + WCT) accounts for 0.5%, while other cooling technologies represent the rest (0.7%). The ACC/DCTs represent an attractive alternative for power plants; however, this technology has not been widely adopted in the US (less than 2% of power plants) due to its negative impact on plant performance. As a rule of thumb, dry cooling results in performance penalty equivalent to approximately 2%-point efficiency loss compared to wet cooling, although the actual magnitude varies with ambient dry bulb temperature, DBT which may vary considerably during the day. As DBT increases, the plant power output decreases, reaching a minimum at the hottest period of the day, which usually coincides with the highest electricity demand for air condition load. Therefore, performance of power plants using DCT/ACC cooling technology is the lowest during the summer mid-day when ambient temperature is the highest. For example, the decrease of the inlet air temperature to the DCT/ACC by 2 Deg C could generate up to 5% additional power at peak demand. It is, therefore, important to improve dry cooling technology to maintain the viability of coal-fired power plants in a carbon constrained future. The method for reducing the cooling air temperature and keeping it constant would mitigate this problem significantly. Objectives of this project were to develop, design, evaluate, and demonstrate a cost-effective system for improving performance of a DCT or ACC for thermal (coal-fired) power plant applications using a low-cost heat storage materials, such as pervious concrete (PC) and phase change material (PCM). Thus, the study focused on development of the system(s) that could be used to alleviate the difficulties in operating DCT/ACC during the summer months by storing cold energy during the nighttime in inexpensive materials PC and PCM and using it during the hottest period(s) of the day. Since very large quantities of cold energy need to be stored to make an impact on performance of a large power plant, it is essential that the storage materials and associated cold energy storage design(s) are inexpensive and the system is simple to build, maintain and operate. To achieve the project objectives, a comprehensive approach, including material development and characterization, component and system modeling, and laboratory- and prototype-scale experiments, was employed including modeling of the system components and of the entire system, development (engineering) of the materials for the heat storage modules of the Cold Thermal Energy Storage System (CTESS) and determination of their properties, design, manufacturing and setup of the laboratory- and prototype-scale test facility and testing, design, manufacturing and setup of the prototype-scale test facility. A modular design of CTESS was employed, where representative modules were designed as the integrated direct contact heat exchanger and thermal energy storage (TES) system. CTESS modules were manufactured and tested. Two prototype-scale designs of the CTESS modules were developed and tested. The use of CTESS increases plant generation increases since it lowers air temperature entering ACC/DCT and keeps it constant during the hottest time of the day. For a PCM-based CTESS, the ambient air temperature is lowered close to the PCM phase change temperature. The duration of the cooling effect depends on the latent heat and mass of PCM in the CTESS. For this project, commercial grade CaCl2 hexahydrate (CaCl2·6H2O or CC6) PCM with phase change temperature of 25 Deg. C was used due to its low cost. For practical reasons, the CTESS was designed to maintain the cooling effect for four hours. The low phase change temperature associated with the commercial grade PCM used in CTESS results in considerably higher improvement in net generation compared to the laboratory (pure) grade. The resistance to heat transfer results in lower net generation compared to the ideal case where resistance to heat transfer is zero. The results demonstrate that CTESS is effective in improving the performance of a dry cooling system. However, its effectiveness depends on the relationship between the ambient air conditions and PCM phase change temperature. As is the case with the heat rejection system, for the best performance, the PCM used in CTESS would need to be matched to the ambient air conditions. The results obtained in this report for selected geographical locations are valid for CC6 and demonstrate that the level of performance to be achieved by the technology will be location-dependent, as is the case with the air cooled condensers. The methodology for engineering of PC-PCM-based heat storage medium is applicable to other PCMs that may need to be used for other ambient air conditions and geographical locations.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2021

Large response of charge stripes to uniaxial stress in La 1.475 Nd 0.4 Sr 0.125 CuO 4

The La-based "214"cuprates host several symmetry-breaking phases, including superconductivity, charge and spin order in the form of stripes, and a structural orthorhombic-to-tetragonal phase transition. Therefore these materials are an ideal system to study the effects of uniaxial stress onto the various correlations that pervade the cuprate phase diagram. We report resonant x-ray scattering experiments on La 1.475 Nd 0.4 Sr 0.125 CuO 4 (LNSCO-125) that reveal a significant response of charge stripes to uniaxial tensile stress of ~0.1GPa. These effects include a reduction of the onset temperature of stripes by ~50K, a 29-K reduction of the low-temperature orthorhombic-to-tetragonal transition, competition between charge order and superconductivity, and a preference for stripes to form along the direction of applied stress. Altogether, we observe a dramatic response of the electronic properties of LNSCO-125 to a modest amount of uniaxial stress.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗