Removal of spurious reflections from computational fluid dynamic solutions with the complex cepstrum
Explore the source record for details and available documents.
Meadows, Kristine R.↗
SEARCH · Engineering Papers
Results for “complex computing”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A special purpose silicon compiler for designing supercomputing VLSI systems
Design of general/special purpose supercomputing VLSI systems for numeric algorithm execution involves tackling two important aspects, namely their computational and communication complexities. Development of software tools for designing such systems itself becomes complex. Hence a novel design methodology has to be developed. For designing such complex systems a special purpose silicon compiler is needed in which: the computational and communicational structures of different numeric algorithms should be taken into account to simplify the silicon compiler design, the approach is macrocell based, and the software tools at different levels (algorithm down to the VLSI circuit layout) should get integrated. In this paper a special purpose silicon (SPS) compiler based on PACUBE macrocell VLSI arrays for designing supercomputing VLSI systems is presented. It is shown that turn-around time and silicon real estate get reduced over the silicon compilers based on PLA's, SLA's, and gate arrays. The first two silicon compiler characteristics mentioned above enable the SPS compiler to perform systolic mapping (at the macrocell level) of algorithms whose computational structures are of GIPOP (generalized inner product outer product) form. Direct systolic mapping on PLA's, SLA's, and gate arrays is very difficult as they are micro-cell based. A novel GIPOP processor is under development using this special purpose silicon compiler.
Venkateswaran, N.↗
Computation of wave propagation in a complex flow
A numerical method has been developed in order to address aeroacoustic problems modeled by the linearized Euler equations. A weak formulation of the equations leads to a time-dependent equation for the test functions. The basic solver being one dimensional, two dimensional problems are handled by directional splitting. This method shows low dissipation and dispersion errors.
Lafon, Philippe↗
When the Eyes Don't Have It: Autonomous Control of Deep Space Vehicles for Human Spaceflight
NASA has been charged with expanding human presence into the solar system. The next phase of exploration will focus on learning how to develop and sustain habitats on the moon for eventual missions to Mars. The Gateway Lunar Orbiting Platform (G-LOP) is a modular spacecraft being built for cis-lunar orbit and offers a true deep space environment for gaining experience for human missions to Mars. The mission concept for Gateway involves long uncrewed periods between missions; therefore, Gateway requires increased self-reliance to separate the spacecraft from Earth-bound control and oversight. This complicates the human-in-the-loop (HITL) concept and requires major adjustments to the traditional automation human-computer interaction paradigm. This paper discusses the design, development, and verification of complex human-computer interactions with the autonomous systems managers which will control the Gateway spacecraft.
Julia M. Badger↗
Wall functions for the kappa-epsilon turbulence model in generalized nonorthogonal curvilinear coordinates
A k-epsilon turbulence model suitable for compressible flow, including the new wall function formulation, has been incorporated into an existing compressible Reynolds-averaged Navier-Stokes code, F3D. The low Reynolds number k-epsilon model of Chien (1982) was added for comparison with the present method. A number of features were added to the F3D code including improved far-field boundary conditions and viscous terms in the streamwise direction. A series of computations of increasing complexity was run to test the effectiveness of the new formulation. Flow over a flat plate was computed by using both orthogonal and nonorthogonal grids, and the friction coefficients and velocity profiles compared with a semi-empirical equation. Flow over a body of revolution at zero angle of attack was then computed to test the method's ability to handle flow over a curved surface. Friction coefficients and velocity profiles were compared to test data. All models gave good results on a relatively fine grid, but only the wall function formulation was effective with coarser grids. Finally, in order to demonstrate the method's ability to handle complex flow fields, separated flow over a prolate spheroid at angle of attack was computed, and results were compared to test data. The results were also compared to a k-epsilon model by Kim and Patel (1991), in which one equation model patched in at the wall was employed. Both models gave reasonable solutions, but improvement is required for accurate prediction of friction coefficients in the separated regions.
Sondak, D. L.↗
Computer-graphics studies of dipole-dipole collisions - Evidence for neutral collision complexes.
Extension of three-dimensional computer-graphics studies of orientation-dependent forces to multiple reflection behavior in dipole-dipole collisions. The collision pairs DCl-DCl and HCl-HCl are studied for rotational temperatures of 25, 77, and 300 K and translational temperatures of 77 and 300 K. The probability of a multiple reflection collision is a very sensitive inverse function of hard-core reflection distance for fixed temperatures. A brief comparison of the results is made with two-dimensional results of Clarke and Smith (1970) for CHF3-CHF3.
Dugan, J. V., Jr.↗
A Physics-Based Work-Energy Formulation for Real-Time Trajectory Guidance of A Lunar Lander
Throughout the years, many researchers have calculated and optimized trajectory solutions for lunar landing systems by employing sophisticated mathematical methods, that include: Hamilton’s Principle of Variation, Pontryagin’s maximum principle, and well known convex-optimization techniques among others. Many of these approaches typically require expensive computational resources to achieve convergence in the solution. In an effort to reduce complexity and the computational load required to obtain real-time guidance commands, a simple physics-based work-energy approach has been formulated. This approach is based on the dissipation of the mechanical energy of the vehicle to its final desired energy state required to achieve a safe landing. The rocket engine(s) employed during landing (among other maneuvers) dissipates mechanical energy by both doing work against the velocity vector of the vehicle (thus defining the trajectory path), and by jettisoning mass. Therefore, by solving the energy dissipation problem at every step of the maneuver, a much simpler formulation that naturally and quickly attains convergence is obtained. This formulation is not limited to approach, landing, and divert maneuvers, but in principle it can be employed during de-orbiting, braking burn, ascent, as well as orbit insertion.
Guidance↗
A Physics-Based Work-Energy Formulation for Real-Time Trajectory Guidance of a Lunar Lander
Throughout the years, many researchers have calculated and optimized trajectory solutions for lunar landing systems by employing sophisticated mathematical methods, that include: Hamilton’s Principle of Variation, Pontryagin’s maximum principle, and well known convex-optimization techniques among others. Many of these approaches typically require expensive computational resources to achieve convergence in the solution. In an effort to reduce complexity and the computational load required to obtain real-time guidance commands, a simple physics-based work-energy approach has been formulated. This approach is based on the dissipation of the mechanical energy of the vehicle to its final desired energy state required to achieve a safe landing. The rocket engine(s) employed during landing (among other maneuvers) dissipates mechanical energy by both doing work against the velocity vector of the vehicle (thus defining the trajectory path), and by jettisoning mass. Therefore, by solving the energy dissipation problem at every step of the maneuver, a much simpler formulation that naturally and quickly attains convergence is obtained. This formulation is not limited to approach, landing, and divert maneuvers, but in principle it can be employed during de-orbiting, braking burn, ascent, as well as orbit insertion.
Guidance↗
GRID2D/3D: A computer program for generating grid systems in complex-shaped two- and three-dimensional spatial domains. Part 2: User's manual and program listing
An efficient computer program, called GRID2D/3D, was developed to generate single and composite grid systems within geometrically complex two- and three-dimensional (2- and 3-D) spatial domains that can deform with time. GRID2D/3D generates single grid systems by using algebraic grid generation methods based on transfinite interpolation in which the distribution of grid points within the spatial domain is controlled by stretching functions. All single grid systems generated by GRID2D/3D can have grid lines that are continuous and differentiable everywhere up to the second-order. Also, grid lines can intersect boundaries of the spatial domain orthogonally. GRID2D/3D generates composite grid systems by patching together two or more single grid systems. The patching can be discontinuous or continuous. For continuous composite grid systems, the grid lines are continuous and differentiable everywhere up to the second-order except at interfaces where different single grid systems meet. At interfaces where different single grid systems meet, the grid lines are only differentiable up to the first-order. For 2-D spatial domains, the boundary curves are described by using either cubic or tension spline interpolation. For 3-D spatial domains, the boundary surfaces are described by using either linear Coon's interpolation, bi-hyperbolic spline interpolation, or a new technique referred to as 3-D bi-directional Hermite interpolation. Since grid systems generated by algebraic methods can have grid lines that overlap one another, GRID2D/3D contains a graphics package for evaluating the grid systems generated. With the graphics package, the user can generate grid systems in an interactive manner with the grid generation part of GRID2D/3D. GRID2D/3D is written in FORTRAN 77 and can be run on any IBM PC, XT, or AT compatible computer. In order to use GRID2D/3D on workstations or mainframe computers, some minor modifications must be made in the graphics part of the program; no modifications are needed in the grid generation part of the program. The theory and method used in GRID2D/3D is described.
Bailey, R. T.↗
OVERAERO-MPI: Parallel Overset Aeroelasticity Code
An overset modal structures analysis code was integrated with a parallel overset Navier-Stokes flow solver to obtain a code capable of static aeroelastic computations. The new code was used to compute the static aeroelastic deformation of an arrow-wing-body geometry and a complex, full aircraft configuration. For the simple geometry, the results were similar to the results obtained with the ENSAERO code and the PVM version of OVERAERO. The full potential of this code suite was illustrated in the complex, full aircraft computations.
Gee, Ken↗
On The Computational Capabilities of Physical Systems: Relationship With Conventional Computer Science - Part 2
In the first of this pair of papers, it was proven that there cannot be a physical computer to which one can properly pose any and all computational tasks concerning the physical universe. It was then further proven that no physical computer C can correctly carry out all computational tasks that can be posed to C. As a particular example, this result means that no physical computer that can, for any physical system external to that computer, take the specification of that external system's state as input and then correctly predict its future state before that future state actually occurs; one cannot build a physical computer that can be assured of correctly "processing information faster than the universe does". These results do not rely on systems that are infinite, and/or non-classical, and/or obey chaotic dynamics. They also hold even if one uses an infinitely fast, infinitely dense computer, with computational powers greater than that of a Turing Machine. This generality is a direct consequence of the fact that a novel definition of computation - "physical computation" - is needed to address the issues considered in these papers, which concern real physical computers. While this novel definition does not fit into the traditional Chomsky hierarchy, the mathematical structure and impossibility results associated with it have parallels in the mathematics of the Chomsky hierarchy. This second paper of the pair presents a preliminary exploration of some of this mathematical structure. Analogues of Chomskian results concerning universal Turing Machines and the Halting theorem are derived, as are results concerning the (im)possibility of certain kinds of error-correcting codes. In addition, an analogue of algorithmic information complexity, "prediction complexity", is elaborated. A task-independent bound is derived on how much the prediction complexity of a computational task can differ for two different reference universal physical computers used to solve that task, a bound similar to the "encoding" bound governing how much the algorithm information complexity of a Turing machine calculation can differ for two reference universal Turing machines. Finally, it is proven that either the Hamiltonian of our universe proscribes a certain type of computation, or prediction complexity is unique (unlike algorithmic information complexity), in that there is one and only version of it that can be applicable throughout our universe.
Wolpert, David H.↗
Shuttle Debris Impact Tool Assessment Using the Modern Design of Experiments
Computational tools have been developed to estimate thermal and mechanical reentry loads experienced by the Space Shuttle Orbiter as the result of cavities in the Thermal Protection System (TPS). Such cavities can be caused by impact from ice or insulating foam debris shed from the External Tank (ET) on liftoff. The reentry loads depend on cavity geometry and certain Shuttle state variables, among other factors. Certain simplifying assumptions have been made in the tool development about the cavity geometry variables. For example, the cavities are all modeled as shoeboxes , with rectangular cross-sections and planar walls. So an actual cavity is typically approximated with an idealized cavity described in terms of its length, width, and depth, as well as its entry angle, exit angle, and side angles (assumed to be the same for both sides). As part of a comprehensive assessment of the uncertainty in reentry loads estimated by the debris impact assessment tools, an effort has been initiated to quantify the component of the uncertainty that is due to imperfect geometry specifications for the debris impact cavities. The approach is to compute predicted loads for a set of geometry factor combinations sufficient to develop polynomial approximations to the complex, nonparametric underlying computational models. Such polynomial models are continuous and feature estimable, continuous derivatives, conditions that facilitate the propagation of independent variable errors. As an additional benefit, once the polynomial models have been developed, they require fewer computational resources to execute than the underlying finite element and computational fluid dynamics codes, and can generate reentry loads estimates in significantly less time. This provides a practical screening capability, in which a large number of debris impact cavities can be quickly classified either as harmless, or subject to additional analysis with the more comprehensive underlying computational tools. The polynomial models also provide useful insights into the sensitivity of reentry loads to various cavity geometry variables, and reveal complex interactions among those variables that indicate how the sensitivity of one variable depends on the level of one or more other variables. For example, the effect of cavity length on certain reentry loads depends on the depth of the cavity. Such interactions are clearly displayed in the polynomial response models.
DeLoach, R.↗
Generating a 2D Representation of a Complex Data Structure
A computer program, designed to assist in the development and debugging of other software, generates a two-dimensional (2D) representation of a possibly complex n-dimensional (where n is an integer >2) data structure or abstract rank-n object in that other software. The nature of the 2D representation is such that it can be displayed on a non-graphical output device and distributed by non-graphical means.
James, Mark↗
Design applications for supercomputers
The complexity of codes for solutions of real aerodynamic problems has progressed from simple two-dimensional models to three-dimensional inviscid and viscous models. As the algorithms used in the codes increased in accuracy, speed and robustness, the codes were steadily incorporated into standard design processes. The highly sophisticated codes, which provide solutions to the truly complex flows, require computers with large memory and high computational speed. The advent of high-speed supercomputers, such that the solutions of these complex flows become more practical, permits the introduction of the codes into the design system at an earlier stage. The results of several codes which either were already introduced into the design process or are rapidly in the process of becoming so, are presented. The codes fall into the area of turbomachinery aerodynamics and hypersonic propulsion. In the former category, results are presented for three-dimensional inviscid and viscous flows through nozzle and unducted fan bladerows. In the latter category, results are presented for two-dimensional inviscid and viscous flows for hypersonic vehicle forebodies and engine inlets.
Studerus, C. J.↗
Applications of domain decomposition methods to turbomachinery flows
Domain decomposition techniques can be used to great advantage by computational fluid dynamicists in computing flows about complex geometries and adapting the grid to the solution. These techniques are particularly useful in computing flows about several bodies that are in relative motion such as rotor/stator configurations in turbomachinery or helicopter rotor/fuselage configurations. This paper discusses some of the basic ideas involved in transferring information between subdomains in a multidomain calculation and presents results for a simple rotor/stator configuration.
Rai, M. M.↗
Real-Gas Flow Properties for NASA Langley Research Center Aerothermodynamic Facilities Complex Wind Tunnels
A computational algorithm has been developed which can be employed to determine the flow properties of an arbitrary real (virial) gas in a wind tunnel. A multiple-coefficient virial gas equation of state and the assumption of isentropic flow are used to model the gas and to compute flow properties throughout the wind tunnel. This algorithm has been used to calculate flow properties for the wind tunnels of the Aerothermodynamics Facilities Complex at the NASA Langley Research Center, in which air, CF4. He, and N2 are employed as test gases. The algorithm is detailed in this paper and sample results are presented for each of the Aerothermodynamic Facilities Complex wind tunnels.
Hollis, Brian R.↗
Progress in incompressible Navier-Stokes computations for propulsion flows and its dual-use applications
Development of an incompressible Navier-Stokes solution procedure was performed for the analysis of a liquid rocket engine pump components and for the mechanical heart assist devices. The solution procedure for the propulsion systems is applicable to incompressible Navier-Stokes flows in a steadily rotating frame of reference for any general complex configurations. The computer codes were tested on different complex configurations such as liquid rocket engine inducer and impellers. As a spin-off technology from the turbopump component simulations, the flow analysis for an axial heart pump was conducted. The baseline Left Ventricular Assist Device (LVAD) design was improved by adding an inducer geometry by adapting from the liquid rocket engine pump. The time-accurate mode of the incompressible Navier-Stokes code was validated with flapping foil experiment by using different domain decomposition methods. In the flapping foil experiment, two upstream NACA 0025 foils perform high-frequency synchronized motion and generate unsteady flow conditions for a downstream larger stationary foil. Fairly good agreement was obtained between unsteady experimental data and numerical results from two different moving boundary procedures. Incompressible Navier-Stokes code (INS3D) has been extended for heat transfer applications. The temperature equation was written for both forced and natural convection phenomena. Flow in a square duct case was used for the validation of the code in both natural and forced convection.
Kiris, Cetin↗
Spectral transformation in the SOFI complex for processing photographic images on the ES computer, part 1
A description is given of three programs catalogued in the form of object modules in the library of a system for processing photographic images computer. PFT is the subprogram of the multi-dimensional BPF of real-valued information, in the operative computer memory. INRECO is a subprogram-interface between the real and complex formats for representing two-dimensional spectra and images. FFT2 is a subprogram for calculating the correlation functions of the image using the previous subprograms.
Debabov, A. S.↗