Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “biomass compositional analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

CCN activity and organic hygroscopicity of aerosols downwind of an urban region in central Amazonia: Seasonal and diel variations and impact of anthropogenic emissions

During the Observations and Modeling of the Green Ocean Amazon (GoAmazon2014/5) campaign, size-resolved cloud condensation nuclei (CCN) spectra were characterized at a research site (T3) 60km downwind of the city of Manaus, Brazil, in central Amazonia for one year (12 March 2014 to 3 March 2015). Particle hygroscopicity (κCCN) and mixing state were derived from the size-resolved CCN spectra, and the hygroscopicity of the organic component of the aerosol (κorg) was then calculated from κCCN and concurrent chemical composition measurements. The annual average κCCN increased from 0.13 at 75 nm to 0.17 at 171 nm, and the increase was largely due to an increase in sulfate volume fraction. Also, during both wet and dry seasons, κCCN, κorg, and particle composition under background conditions exhibited essentially no diel variations. The constant κorg of ~0.15 is consistent with the largely uniform and high O:C value (~0.8), indicating that the aerosols under background conditions are dominated by the aged regional aerosol particles consisting of highly oxygenated organic compounds. For air masses strongly influenced by urban pollution and/or local biomass burning, lower values of κorg and organic O:C atomic ratio were observed during night, due to accumulation of freshly emitted particles, dominated by primary organic aerosol (POA) with low hygroscopicity, within a shallow nocturnal boundary layer. The O:C, κorg, and κCCN increased from the early morning hours and peaked around noon, driven by the formation and aging of secondary organic aerosol (SOA) and dilution of POA emissions into a deeper boundary layer, while the development of the boundary layer, which leads to mixing with aged particles from the residual layer aloft, likely also contributed to the increases. The hygroscopicities associated with individual organic factors, derived from PMF analysis of AMS spectra, were estimated through multi-variable linear regression. For the SOA factors, the variation of the κ value with O:C agrees well with the linear relationship reported from earlier laboratory studies of SOA hygroscopicity. On the other hand, the variation in O:C of ambient aerosol organics is largely driven by the variation in the volume fractions of POA and SOA factors, which have very different O:C values. As POA factors have hygroscopicity values well below the linear relationship between SOA hygroscopicity and O:C, mixtures with different POA and SOA fractions exhibit a steeper slope for the increase of κorg with O:C, as observed during this and earlier field studies. Our finding helps better understand and reconcile the differences in the relationships between κorg and O:C observed in laboratory and field studies, therefore providing a basis for improved parameterization in global models, especially in a tropical context.

54 ENVIRONMENTAL SCIENCES↗

Understanding the Impacts of Biomass Blending on the Uncertainty of Hydrolyzed Sugar Yield from a Stochastic Perspective

Feedstock price and availability are key challenges for biorefinery development and biomass blending has been suggested as a route to overcome these limitations. However, the impacts of feedstock blending on the variability of yields of hydrolyzed sugar remained unclear. This study quantifies the uncertainties in the sugar yields from the blends of corn stover, switchgrass, and grass clippings by considering both variable and model uncertainties. The results indicate that feedstock blending reduces the uncertainties in sugar yields and delivers feedstock of more uniform quality. A further investigation on xxx demonstrates that the reduction in overall uncertainty is achieved by reduced compositional uncertainties of blended feedstock. Based on these results, the optimization of blending ratios was performed with respect to three objectives: (1) probability of meeting the sugar yield target; (2) expected sugar yields; and (3) sugar yield per unit feedstock expense, while satisfying constraints of feedstock availability and cost. In conclusion, the optimization method developed in this study, is readily applied to other combinations of feedstocks, biofuels production processes, and constraints.

09 BIOMASS FUELS↗

Investigating New Particle Formation and Growth Over an Urban Location in the Eastern Mediterranean

Abstract This study investigates the new particle formation (NPF) events at an urban location in the Eastern Mediterranean. Particle size distribution, particulate chemical composition, and gaseous pollutants were monitored in Rehovot, Israel (31°53″N 34°48″E) during two campaigns: from April 29 to 3 May 2021 (Campaign 1) and from May 3 to 11 May 2023 (Campaign 2), coinciding with an intensive bonfire burning festival. The organic aerosols (OA) source apportionment identified two major factors—Hydrocarbon‐like OA and Biomass‐burning OA—as well as two secondary factors—MO‐OOA (more oxidized‐oxygenated OA) and LO‐OOA (low oxidized oxygenated OA). NPF events were frequently observed during the day (mostly well‐defined nucleation events) and at night (burst of ultrafine mode particles without any discernible growth). A condensation sink value of (9.4 ± 4.0) × 10 −3 s −1 during Campaign 1 and (14.2 ± 6.0) × 10 −3 s −1 during Campaign 2 was obtained. The daytime events were associated with enhanced sulfuric acid proxy concentrations of (2–12) × 10 6 molecules cm −3 , suggesting the role of gas‐phase photochemistry in promoting NPF. A novel approach of hybrid positive matrix factorization analysis was used to deconvolve the chemical species responsible for the observed events. The results suggest the involvement of multiple components, including ammonium sulfate and MO‐OOA, in the nucleation; Nitrate, HOA and LO‐OOA participate in the subsequent particle growth for the daytime events. Nighttime events involve only semi‐volatile species (LO‐OOA, HOA and nitrate) along with ammonium sulfate.

Meteorology & Atmospheric Sciences↗

Functional insights of novel Bathyarchaeia reveal metabolic versatility in their role in peatlands of the Peruvian Amazon

ABSTRACT The decomposition of soil organic carbon within tropical peatlands is influenced by the functional composition of the microbial community. In this study, building upon our previous work, we recovered a total of 28 metagenome-assembled genomes (MAGs) classified as Bathyarchaeia from the tropical peatlands of the Pastaza-Marañón Foreland Basin (PMFB) in the Amazon. Using phylogenomic analyses, we identified nine genus-level clades to have representatives from the PMFB, with four forming a putative novel family (“CandidatusPaludivitaceae”) endemic to peatlands. We focus on theCa. Paludivitaceae MAGs due to the novelty of this group and the limited understanding of their role within tropical peatlands. Functional analysis of these MAGs reveals that this putative family comprises facultative anaerobes, possessing the genetic potential for oxygen, sulfide, or nitrogen oxidation. This metabolic versatility can be coupled to the fermentation of acetoin, propanol, or proline. The other clades outsideCa. Paludivitaceae are putatively capable of acetogenesis andde novoamino acid biosynthesis and encode a high amount of Fe 3+ transporters. Crucially, theCa. Paludivitaceae are predicted to be carboxydotrophic, capable of utilizing CO for energy generation or biomass production. Through this metabolism, they could detoxify the environment from CO, a byproduct of methanogenesis, or produce methanogenic substrates like CO 2 and H 2 . Overall, our results show the complex metabolism and various lineages of Bathyarchaeia within tropical peatlands pointing to the need to further evaluate their role in these ecosystems. IMPORTANCE With the expansion of theCandidatusPaludivitaceae family by the assembly of 28 new metagenome assembled genomes, this study provides novel insights into their metabolic diversity and ecological significance in peatland ecosystems. From a comprehensive phylogenic and functional analysis, we have elucidated their putative unique facultative anaerobic capabilities and CO detoxification potential. This research highlights their crucial role in carbon cycling and greenhouse gas regulation. These findings are essential for resolving the microbial processes affecting peat soil stability, offering new perspectives on the ecological roles of previously underexplored and underrepresented archaeal populations.

Microbiology↗

Ground-Based High Spectral Resolution Lidar Observation of Aerosol Vertical Distribution in the Summertime Southeast United States

As part of the Southeast United States-based Studies of Emissions and Atmospheric Composition, Clouds and Climate Coupling by Regional Surveys (SEAC4RS), and collinear with part of the Southeast Atmosphere Study, the University of Wisconsin High Spectral Resolution Lidar system was deployed to the University of Alabama from 19 June to 4 November 2013. With a collocated Aerosol Robotic Network (AERONET) sun photometer, a nearby Chemical Speciation Network (PM2.5) measurement station, and near daily ozonesonde releases for the August-September SEAC4RS campaign, the site allowed the regions first comprehensive diurnal monitoring of aerosol particle vertical structure. A 532nm lidar ratio of 55 sr provided good closure between aerosol backscatter and AERONET (aerosol optical thickness, AOT). A principle component analysis was performed to identify key modes of variability in aerosol backscatter. ''Fair weather'' days exhibited classic planetary boundary layer structure of a mixed layer accounting for approx. 50% of AOT and an entrainment zone providing another 25%. An additional 5-15% of variance is gained from the lower free troposphere from either convective detrainment or frequent intrusions of western United States biomass burning smoke. Generally, aerosol particles were contained below the 0 C level, a common level of stability in convective regimes. However, occasional strong injections of smoke to the upper troposphere were also observed, accounting for the remaining 10-15% variability in AOT. Examples of these common modes of variability in frontal and convective regimes are presented, demonstrating why AOT often has only a weak relationship to surface PM2.5 concentration.

HSRL↗

Compartmentalized microbial composition, oxygen gradients and nitrogen fixation in the gut of Odontotaenius disjunctus

Coarse woody debris is an important biomass pool in forest ecosystems that numerous groups of insects have evolved to take advantage of. These insects are ecologically important and represent useful natural analogs for biomass to biofuel conversion. Using a range of molecular approaches combined with microelectrode measurements of oxygen, here we have characterized the gut microbiome and physiology of Odontotaenius disjunctus, a wood-feeding beetle native to the eastern United States. We hypothesized that morphological and physiological differences among gut regions would correspond to distinct microbial populations and activities. In fact, significantly different communities were found in the foregut (FG), midgut (MG)/posterior hindgut (PHG) and anterior hindgut (AHG), with Actinobacteria and Rhizobiales being more abundant toward the FG and PHG. Conversely, fermentative bacteria such as Bacteroidetes and Clostridia were more abundant in the AHG, and also the sole region where methanogenic Archaea were detected. Although each gut region possessed an anaerobic core, micron-scale profiling identified radial gradients in oxygen concentration in all regions. Nitrogen fixation was confirmed by 15 N 2 incorporation, and nitrogenase gene (nifH) expression was greatest in the AHG. Phylogenetic analysis of nifH identified the most abundant transcript as related to Ni–Fe nitrogenase of a Bacteroidetes species, Paludibacter propionicigenes. Overall, we demonstrate not only a compartmentalized microbiome in this beetle digestive tract but also sharp oxygen gradients that may permit aerobic and anaerobic metabolism to occur within the same regions in close proximity. We provide evidence for the microbial fixation of N 2 that is important for this beetle to subsist on woody biomass.

Ceja-Navarro, Javier A.↗

Compound-specific Isotope Analysis of Cyanobacterial Pure cultures and Microbial Mats: Effects of Photorespiration?

Microbial mats are considered modern homologs of Precambrian stromatolites. The carbon isotopic compositions of organic matter and biomarker lipids provide clues to the depositional environments of ancient mat ecosystems. As the source of primary carbon fixation for over two billion years, an understanding of cyanobacterial lipid biosynthesis, associated isotopic discriminations, and the influence of physiological factors on growth and isotope expression is essential to help us compare modern microbial ecosystems to their ancient counterparts. Here, we report on the effects of photorespiration (PR) on the isotopic composition of cyanobacteria and biomarker lipids, and on potential PR effects associated with the composition of various microbial mats. The high light, high O2 and limiting CO2 conditions often present at the surface of microbial mats are known to support PR in cyanobacteria. The oxygenase function of ribulose bisphosphate carboxylase/oxygenase can result in photoexcretion of glycolate and subsequent degration by heterotrophic bacteria. We have found evidence which supports an isotopic depletion (increased apparent E) scaled to O2 level associated with growth of Phormidium luridum at low CO2 concentrations (less than 0.04%). Similar to previous studies, isotopic differences between biomass and lipid biomarkers, and between lipid classes were positively correlated with overall fractionation, and should provide a means of estimating the influence of PR on overall isotopic composition of microbial mats. Several examples of microbial mats growing in the hydrothermal waters of Yellowstone National Park and the hypersaline marine evaporation ponds at Guerrero Negro, Baja Sur Mexico will be compared with a view to PR as a possible explanation of the relatively heavy C-isotope composition of hypersaline mats.

Jahnke, L. L.↗

Simultaneous Downregulation of MTHFR and COMT in Switchgrass Affects Plant Performance and Induces Lesion-Mimic Cell Death

Switchgrass (Panicum virgatum) has been developed into a model lignocellulosic bioenergy crop. Downregulation of caffeic acid O-methyltransferase (COMT), a key enzyme in lignin biosynthesis, has been shown to alter lignification and increase biofuel yield in switchgrass. Methylenetetrahydrofolate reductase (MTHFR) mediates C1 metabolism and provides methyl units consumed by COMT. It was predicted that co-silencing of MTHFR and COMT would impact lignification even more than either of the single genes. However, our results showed that strong downregulation of MTHFR in a COMT-deficient background led to altered plant growth and development, but no significant change in lignin content or composition was found when compared with COMT plants. Another unexpected finding was that the double MTHFR/COMT downregulated plants showed a novel lesion-mimic leaf phenotype. Molecular analyses revealed that the lesion-mimic phenotype was caused by the synergistic effect of MTHFR and COMT genes, with MTHFR playing a predominant role. Microarray analysis showed significant induction of genes related to oxidative and defense responses. The results demonstrated the lack of additive effects of MTHFR and COMT on lignification. Furthermore, this research revealed an unexpected role of the two genes in the modulation of lesion-mimic cell death as well as their synergistic effects on agronomic performance.

methylenetetrahydrofolate reductase (MTHFR)↗

Molecular Characterization of Organophosphorus Compounds in Wildfire Smoke Using 21-T Fourier Transform-Ion Cyclotron Resonance Mass Spectrometry

Here, we present a detailed molecular characterization of organophosphorus compounds in ambient organic aerosol influenced by wildfire smoke. Biomass burning organic aerosol (BBOA) is an important source of phosphorus (P) to surface waters, where even a small imbalance in the P flux can lead to substantial effects on water quality, such as eutrophication, algal blooms, and oxygen depletion. We aimed to exploit the ultrahigh resolving power, mass accuracy, and sensitivity of Fourier transform-ion cyclotron resonance mass spectrometry (FT-ICR MS) to explore the molecular composition of an ambient BBOA sample collected downwind of Pacific Northwest wildfires. The 21-T FT-ICR MS yielded 10533 distinct formulae, which included molecular species comprising C, H, O, and P with or without N, i.e., organophosphorus compounds that have long been quantified in wildfire smoke but have not yet been characterized at the molecular level. The lack of detailed molecular characterization of organophosphorus compounds in BBOA is primarily due to their inherently low concentrations in aerosols and poor ionization efficiency in complex mixtures. We demonstrate that the exceptional sensitivity of the 21-T FT-ICR MS allows qualitative analysis of a previously uncharacterized fraction of BBOA without its selective concentration from the organic matrix, exemplifying the need for ultrahigh-resolution tools for a more detailed and accurate molecular depiction of such complex mixtures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Advanced Electron Microscopy of Nanophased Synthetic Polymers and Soft Complexes for Energy and Medicine Applications

After decades of developments, electron microscopy has become a powerful and irreplaceable tool in understanding the ionic, electrical, mechanical, chemical, and other functional performances of next-generation polymers and soft complexes. The recent progress in electron microscopy of nanostructured polymers and soft assemblies is important for applications in many different fields, including, but not limited to, mesoporous and nanoporous materials, absorbents, membranes, solid electrolytes, battery electrodes, ion- and electron-transporting materials, organic semiconductors, soft robotics, optoelectronic devices, biomass, soft magnetic materials, and pharmaceutical drug design. For synthetic polymers and soft complexes, there are four main characteristics that differentiate them from their inorganic or biomacromolecular counterparts in electron microscopy studies: (1) lower contrast, (2) abundance of light elements, (3) polydispersity or nanomorphological variations, and (4) large changes induced by electron beams. Since 2011, the Center for Nanophase Materials Sciences (CNMS) at Oak Ridge National Laboratory has been working with numerous facility users on nanostructured polymer composites, block copolymers, polymer brushes, conjugated molecules, organic–inorganic hybrid nanomaterials, organic–inorganic interfaces, organic crystals, and other soft complexes. This review crystalizes some of the essential challenges, successes, failures, and techniques during the process in the past ten years. It also presents some outlooks and future expectations on the basis of these works at the intersection of electron microscopy, soft matter, and artificial intelligence. Machine learning is expected to automate and facilitate image processing and information extraction of polymer and soft hybrid nanostructures in aspects such as dose-controlled imaging and structure analysis.

36 MATERIALS SCIENCE↗

CCN activity and organic hygroscopicity of aerosols downwind of an urban region in central Amazonia: seasonal and diel variations and impact of anthropogenic emissions

Abstract. During the Observations and Modeling of the Green Ocean Amazon (GoAmazon2014/5) campaign, size-resolved cloud condensation nuclei (CCN) spectra were characterized at a research site (T3) 60 km downwind of the city of Manaus, Brazil, in central Amazonia for 1 year (12 March 2014 to 3 March 2015). Particle hygroscopicity (κCCN) and mixing state were derived from the size-resolved CCN spectra, and the hygroscopicity of the organic component of the aerosol (κorg) was then calculated from κCCN and concurrent chemical composition measurements. The annual average κCCN increased from 0.13 at 75 nm to 0.17 at 171 nm, and the increase was largely due to an increase in sulfate volume fraction. During both wet and dry seasons, κCCN, κorg, and particle composition under background conditions exhibited essentially no diel variations. The constant κorg of ∼ 0. 15 is consistent with the largely uniform and high O : C value (∼ 0. 8), indicating that the aerosols under background conditions are dominated by the aged regional aerosol particles consisting of highly oxygenated organic compounds. For air masses strongly influenced by urban pollution and/or local biomass burning, lower values of κorg and organic O : C atomic ratio were observed during night, due to accumulation of freshly emitted particles, dominated by primary organic aerosol (POA) with low hygroscopicity, within a shallow nocturnal boundary layer. The O : C, κorg, and κCCN increased from the early morning hours and peaked around noon, driven by the formation and aging of secondary organic aerosol (SOA) and dilution of POA emissions into a deeper boundary layer, while the development of the boundary layer, which leads to mixing with aged particles from the residual layer aloft, likely also contributed to the increases. The hygroscopicities associated with individual organic factors, derived from PMF (positive matrix factorization) analysis of AMS (aerosol mass spectrometry) spectra, were estimated through multivariable linear regression. For the SOA factors, the variation of the κ value with O : C agrees well with the linear relationship reported from earlier laboratory studies of SOA hygroscopicity. On the other hand, the variation in O : C of ambient aerosol organics is largely driven by the variation in the volume fractions of POA and SOA factors, which have very different O : C values. As POA factors have hygroscopicity values well below the linear relationship between SOA hygroscopicity and O : C, mixtures with different POA and SOA fractions exhibit a steeper slope for the increase in κorg with O : C, as observed during this and earlier field studies. This finding helps better understand and reconcile the differences in the relationships between κorg and O : C observed in laboratory and field studies, therefore providing a basis for improved parameterization in global models, especially in a tropical context.

Thalman, Ryan↗

Assessing the link between aerosol mixing state, structure and composition and their optical properties: Ascension Island as a testbed for the South‐East Atlantic aerosol regimes

Forest and savanna fires are a major source of pollution over the globe. Such fire events emit to the atmosphere a considerable amount of “fluffy” fractal black looking particles that are often referred to as black carbon (BC) or soot aerosols. In fact, BC particles (aerosols) emitted from savanna and agricultural fires over the African continent play an important role in the region’s and the global climate. These fires occur each year between July and October, which is referred to as the biomass burning (BB) season and are considered among the globe's largest man-made emission sources of BC particles. However, during these fire events, not only BC particles are emitted, but also other types of particles and gases that can interact with each other to create new particles, generating a slew of particles often generally referred to as BB aerosols. Although the majority of the fire emissions occur inland in the sub-Saharan part of Africa, their effect reaches far beyond the continent due to the prevailing easterly winds, which transport those aerosols over the South-East Atlantic (SEA) ocean, off the west-coast of Africa. The reason why these particles are so important to the regional and global climate is that they absorb sunlight radiation, which overall warms the climate. However, the magnitude of this warming effect is highly uncertain and depends upon a multitude of aspects. Our overarching goal for this project was to better understand the changes in the aerosol properties as they transport from fire sources downstream toward the ocean and how this can eventually affect the earth's radiative budget in terms of warming or cooling. Following the above, our work here was focused on the investigation of the African BB aerosol plumes mixing state (mixing of BB aerosols and other aerosol types), composition and size distribution as they transport from the African continent towards the SEA ocean, and their link with some of the commonly measurable bulk optical properties such as mass absorption coefficient (MAC) and single scattering albedo (SSA). We utilized three field missions that were conducted over the SEA ocean between 2016 and 2018. Specifically, we used (1) ground-based measurements from the DOE ARM Mobile Facility (AMF1), which was deployed at Ascension Island (ASI) for the LASIC (Layered Atlantic Smoke Interactions with Clouds) campaign between June 2016 and October 2017, (2) airborne measurements from the UK CLARIFY (Clouds and Aerosol Radiative impacts and Forcing) campaign during Aug-Sep-2017, and (3) airborne measurements from the ORACLES (Observations of Aerosols above Clouds and their interactions) campaign during Aug-2017, and Sep-Oct-2018. The three campaigns cover a relatively large region, from the western African coast on the east towards Ascension Island in the middle of the SEA to the west. We used the data gathered by these campaigns to find how BB properties and composition change from near emission sources (the ORACLES campaign flights) downstream (the CLARIFY flights and the ground based LASIC measurements). We used particle trajectory following methodologies to connect the measurements from the different campaigns, which allowed us to follow a certain aerosol plume (airmass) from near-source towards Ascension Island. We found out that atmospheric aging processes governed by the UV light from the sun (photochemistry) and cloud processes (aqueous chemistry) govern the changes seen in the particle composition during the transport were more dominant in dictating aerosol composition than specific emission composition or source types. We assessed how aerosol optical properties change during the BB season and what are the main drivers of this change. We found that the enhanced ratio of BC to CO is well correlated with single scattering albedo (SSA) and mass absorption coefficient (MACBC), providing a simple way to estimate the aerosol optical characteristics in the south-eastern Atlantic Ocean. From the analysis of the location of BB, the primary source fuel, the water content in the fuel, combined with the mean cloud cover and precipitation in the transport areas of the BB plume, we conclude that the increase in BC/CO from June to August is likely to be caused by burning becoming more flaming (hot fires), and the decrease in BC/CO in September and October may be caused by smoldering (colder) fires. We found that aerosol hygroscopicity increases with decreasing altitude below 2km, and that enhanced BB hygroscopicity at lower altitudes is mainly due to a lower organic aerosol (OA) fraction, increased sulfate fraction, and greater hygroscopicity parameter of OA at lower altitudes.

54 ENVIRONMENTAL SCIENCES↗

Effect of Microwave and Thermal Co-pyrolysis of Low-Rank Coal and Pine Wood on Product Distributions and Char Structure

Direct conversion of a low-rank coal into valuable chemicals or improving its char’s coking value became very demanding aims in coal utilization strategies. Here, the co-pyrolysis of a low-rank lignite coal and pine wood sawdust biomass blended at a 3:1 coal-to-biomass ratio was investigated along with original coal and biomass samples by microwave-assisted and conventional thermal methods at 550 °C under nitrogen and ambient pressure. The carbon structure and its reactivity in generated chars and the product distributions were greatly affected by the applied heating mechanism and the presence of biomass during coal pyrolysis. High gas and low tar yields were observed for all microwave chars in comparison to thermal chars, regardless of composition. The addition of biomass to coal increased the tar yield under both methods and to a higher extent under the microwave. This agrees with the high gas yield and high aromatic-to-aliphatic fraction observed under the microwave and the presence of biomass. The high O/C ratio and low fixed carbon content in a biomass structure relative to coal affect the product distribution during microwave pyrolysis. This could selectively heat the biomass in the sample, remove its polar groups, and convert it into an efficient microwave absorber biochar that can decompose coal efficiently during co-pyrolysis. The aromatic carbon stacking and its ordering in the generated chars were investigated by powder X-ray diffraction, Raman spectroscopy, dielectric property measurements, and electron spin resonance techniques. A synergistic effect was observed upon biomass addition during microwave coal pyrolysis. Electron spin resonance spectroscopy revealed that the microwave coal/biomass char is the most stable char with the lowest free radical concentration. Furthermore, this agrees with the highest I G /I all band area ratio calculated from Raman analysis revealing a more graphitic nature for carbon in this char. Similarly, the dielectric properties confirmed that the addition of biomass to coal under the microwave has the highest loss tangent, indicating a high graphitic nature compared to pure biochar or coal char.

09 BIOMASS FUELS↗

Nanoscale Compositional Mapping of Spent HZSM-5: An Atom Probe Tomography Study

Zeolites are highly crystalline and porous materials possessing a well-defined one- to three-dimensional pore structure. Zeolites play a major role in the petrochemical industry, exploitation of non-conventional petroleum resources and nonpetroleum resources like gas and coal. Recently, zeolite has been researched heavily in the valorization of biomass for renewable fuel and chemical generation. It has been reported widely that zeolite deactivation can occur via two main mechanisms. The first one is leaching of alumina from the unit structure of the zeolite in the presence of steam; this mechanism causes the irreversible deactivation. The second mechanism is the formation of coke during the transformation of organic compounds in the pores and/or the outer surface and the poisoning of the active sites and/or blocking of the pores. The catalyst deactivation from this mode can be regenerated by burning the catalyst under oxidative conditions. Repeated thermal treatment for spent catalyst regeneration is also shown to cause permanent modification of the zeolite structure. So identifying the nature and the location of the coking material and changes in Al distribution in catalyst after catalytic reactions becomes imperative. Recently, a relatively new technique called atom probe tomography (APT) has been increasingly used to perform 3D quantitative analysis of element distribution with sub-nanometer scale spatial resolution and high mass sensitivity up to the few ppm level of concentration of elements in materials. In the study we used a multimodal approach including C K-edge x-ray absorption along with 13C cross polarization magic angle spinning nuclear magnetic resonance (CP-MAS NMR) and APT to investigate element distribution within a HZSM-5 as-synthesized condition and after ethanol conversion reaction.

Devaraj, Arun↗

Airborne In-Situ Trace Gas Measurements of Multiple Wildfires in California (2013-2014)

Biomass burning emissions are an important source of a wide range of trace gases and particles that can impact local, regional and global air quality, climate forcing, biogeochemical cycles and human health. In the western US, wildfires dominate over prescribed fires, contributing to atmospheric trace gas budgets and regional and local air pollution. Limited sampling of emissions from wildfires means western US emission estimates rely largely on data from prescribed fires, which may not be a suitable proxy for wildfire emissions.We report here in-situ measurements of carbon dioxide, methane, ozone and water vapor from the plumes of a variety of wildfires sampled in California in the fire seasons of 2013 and 2014. Included in the analysis are the Rim Fire (August October 2013, near Yosemite National Park), the Morgan Fire (September 2013, near Clayton, CA), and the El Portal Fire (July August 2014, in Yosemite National Park), among others. When possible, fires were sampled on multiple days.Emission ratios and estimated emission factors will be presented and discussed in the context of fuel composition, plume structure, and fire phase. Correlations of plume chemical composition to MODISVIIRS Fire Radiative Power (FRP) and other remote sensing information will be explored. Furthermore, the role of plumes in delivery of enhanced ozone concentrations to downwind municipalities will be discussed.

Gas↗

Turbulent flame speeds and NOx kinetics of HHC fuels with contaminants and high dilution levels

This progress report documents the second year of the project, from October 1, 2011 through September 30, 2012. Characterization of the new turbulent flame speed vessel design was completed. Turbulence statistics of three impellers with different geometric features were measured using particle image velocimetry inside a Plexiglas model (~1:1 scale) of a cylindrical flame speed vessel (30.5 cm ID × 35.6 cm L). With four impellers arranged in a central-symmetric configuration, turbulence intensities between 1.2 and 1.7 m/s with negligible mean flow (0.1u´) were attained at the lowest fan speeds. Acceptable ranges for homogeneity and isotropy ratios of the velocity fields were set within a narrow bandwidth near unity (0.9-1.1). Homogeneity ratios were unaffected by changes to the impeller geometry, and the prototype with the higher number of blades caused the flow to become anisotropic. The integral length scale of the flow fields varied between 27 and 20 mm, which correlates well with those typically observed inside a gas turbine combustor. The mechanism to independently vary the intensity level and the integral length scale was established, where turbulence intensity level was dependent on the rotational speed of the fan, and the integral length scale decreased with increasing blade pitch angle. Ignition delay times of H₂/O₂ mixtures highly diluted with Ar and doped with various amounts of N₂O (100, 400, 1600, 3200 ppm) were measured in a shock tube behind reflected shock waves over a wide range of temperatures (940-1675 K). The pressure range investigated during this work (around 1.6, 13, and 30 atm) allows studying the effect of N₂O on hydrogen ignition at pressure conditions that have never been heretofore investigated. Ignition delay times were decreased when N₂O was added to the mixture only for the higher nitrous oxide concentrations, and some changes in the activation energy were also observed at 1.5 and 30 atm. When it occurred, the decrease in the ignition delay time was proportional to the amount of N₂O added and depended on pressure and temperature conditions. A detailed chemical kinetics model was developed using kinetic mechanisms from the literature. This model predicts well the experimental data obtained during this study and from the literature. The chemical analysis using this model showed that the decrease in the ignition delay time was mainly due to the reaction N₂O +M ⇌ N₂ + O +M which provides O atoms to strengthen the channel O + H₂ ⇌ OH + H. Ignition delay times have been measured behind reflected shock waves at 1.5, 12 and 30 atm for a mixture representative of a syngas produced from biomass (0.29659% CO / 0.29659% H₂ / 0.15748% CO₂ / 0.08924% CH₄ / 0.20997% H₂O / 0.95013% O₂ in 98% Ar (mol.%)) and for the same biomass-derived syngas mixture doped with 200 ppm of NH₃. The importance of the various constituents on the ignition delay time was investigated by comparing the results with data from various baseline mixtures (H₂/O₂/Ar, H₂/CO/O₂/Ar and H₂/CO/O₂/Ar with one of the other constituent of the syngas (i.e. CO₂, H₂O, CH₄ or NH₃)). The equivalence ratio was set to 0.5 during this study. Several recent detailed kinetics mechanisms from the literature were computed against these data, with fair agreement. Results showed that the mixture composition can have an important effect on the ignition delay time, with most of the effect being due to CH₄ addition through the reaction CH₄+OH⇌CH₃+H₂O. The ammonia impurity had very little effect on the ignition delay time over the range of conditions studied.

Petersen, Eric↗

Characterization of Fine Particulate Matter (PM) and Secondary PM Precursor Gases in the Mexico City Metropolitan Area

This project was one of three collaborating grants funded by DOE/ASP to characterize the fine particulate matter (PM) and secondary PM precursors in the Mexico City Metropolitan Area (MCMA) during the MILAGRO Campaign. The overall effort of MCMA-2006, one of the four components, focused on i) examination of the primary emissions of fine particles and precursor gases leading to photochemical production of atmospheric oxidants and secondary aerosol particles; ii) measurement and analysis of secondary oxidants and secondary fine PM production, with particular emphasis on secondary organic aerosol (SOA), and iii) evaluation of the photochemical and meteorological processes characteristic of the Mexico City Basin. The collaborative teams pursued the goals through three main tasks: i) analyses of fine PM and secondary PM precursor gaseous species data taken during the MCMA-2002/2003 campaigns and preparation of publications; ii) planning of the MILAGRO Campaign and deployment of the instrument around the MCMA; and iii) analysis of MCMA-2006 data and publication preparation. The measurement phase of the MILAGRO Campaign was successfully completed in March 2006 with excellent participation from the international scientific community and outstanding cooperation from the Mexican government agencies and institutions. The project reported here was led by the Massachusetts Institute of Technology/Molina Center for Energy and the Environment (MIT/MCE2) team and coordinated with DOE/ASP-funded collaborators at Aerodyne Research Inc., University of Colorado at Boulder and Montana State University. Currently 24 papers documenting the findings from this project have been published. The results from the project have improved significantly our understanding of the meteorological and photochemical processes contributing to the formation of ozone, secondary aerosols and other pollutants. Key findings from the MCMA-2003 include a vastly improved speciated emissions inventory from on-road vehicles: the MCMA motor vehicles produce abundant amounts of primary PM, elemental carbon, particle-bound polycyclic aromatic hydrocarbons, carbon monoxide and a wide range of air toxics; the feasibility of using eddy covariance techniques to measure fluxes of volatile organic compounds in an urban core and a valuable tool for validating local emissions inventory; a much better understanding of the sources and atmospheric loadings of volatile organic compounds; the first spectroscopic detection of glyoxal in the atmosphere; a unique analysis of the high fraction of ambient formaldehyde from primary emission sources; characterization of ozone formation and its sensitivity to VOCs and NO x ; a much more extensive knowledge of the composition, size distribution and atmospheric mass loadings of both primary and secondary fine PM, including the fact that the rate of MCMA SOA production greatly exceeded that predicted by current atmospheric models; evaluations of significant errors that can arise from standard air quality monitors for O 3 and NO 2 ; and the implementation of an innovative Markov Chain Monte Carlo method for inorganic aerosol modeling as a powerful tool to analyze aerosol data and predict gas phase concentrations where these are unavailable. During the MILAGRO Campaign the collaborative team utilized a combination of central fixed sites and a mobile laboratory deployed throughout the MCMA to representative urban and boundary sites to measure trace gases and fine particles. Analysis of the extensive 2006 data sets has confirmed the key findings from MCMA-2002/2003; additionally MCMA-2006 provided more detailed gas and aerosol chemistry and wider regional scale coverage. Key results include an updated 2006 emissions inventory; extension of the flux system to measure fluxes of fine particles; better understanding of the sources and apportionment of aerosols, including contribution from biomass burning and industrial sources; a comprehensive evaluation of metal containing particles in a complex urban environment; identification of a close correlation between the rate of production of SOA and “Odd Oxygen” (O 3 + NO 3 ) and primary organic PM with CO in the urban plume; a more sophisticated understanding of the relationship between ozone formation and ozone precursors: while ozone production in the urban area is VOC-limited, the response is mostly NOx-limited in the surrounding mountain. Comparison of the findings from 2003 and 2006 also confirm that the VOC levels have decreased during the three-year period, while NO x levels remain the same. The results from the 2002/2003 and 2006 have been presented at international conferences and communicated to Mexican government officials. In addition, a large number of graduate students and post-doctoral associates were involved in the project. All data sets and publications are available to the scientific community.

54 ENVIRONMENTAL SCIENCES↗