SEARCH · Engineering Papers

Results for “bifurcation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

All sources NASA NTRS DOE OSTI

NASA NTRS1984

Water-tunnel study of transition flow around circular cylinders

The recently reported phenomenon of asymmetric flow separation from a circular cylinder in the critical Reynolds number regime has been confirmed in a water-tunnel experiment. For the first time, an attempt was made to visualize the wake of the cylinder during the transition from subcritical to critical flow and to correlate the visualizations with lift and drag measurements. The occurrence of a dominant asymmetric-flow state was quite repeatable, both when increasing and decreasing the Reynolds number, resulting in a mean lift coefficient of C sub L approx 1.2 and a shift in the angle of the wake by about 12 deg. A distinctive step change in the drag and shedding frequency was also found to occur. A hysteresis was confirmed to exist in this region as the Reynolds number was cycled over the transition range. Both boundaries of the asymmetry appear to be supercritical bifurcations in the flow. The asymmetry was normally steady in the mean; however, there were instances when the direction of the asymmetry reversed and remained so for the duration of the Reynolds number sweep through this transition region. A second asymmetry was observed at a higher Reynolds number; however, the mean lift coefficient was much lower, and the direction of the asymmetry was not observed to reverse. Introducing a small local disturbance into the boundary layer was found to prevent the critical asymmetry from developing along the entire span of the cylinder.

Almosnino, D.↗

NASA NTRS1984

Nonlinear problems in flight dynamics

A comprehensive framework is proposed for the description and analysis of nonlinear problems in flight dynamics. Emphasis is placed on the aerodynamic component as the major source of nonlinearities in the flight dynamic system. Four aerodynamic flows are examined to illustrate the richness and regularity of the flow structures and the nature of the flow structures and the nature of the resulting nonlinear aerodynamic forces and moments. A framework to facilitate the study of the aerodynamic system is proposed having parallel observational and mathematical components. The observational component, structure is described in the language of topology. Changes in flow structure are described via bifurcation theory. Chaos or turbulence is related to the analogous chaotic behavior of nonlinear dynamical systems characterized by the existence of strange attractors having fractal dimensionality. Scales of the flow are considered in the light of ideas from group theory. Several one and two degree of freedom dynamical systems with various mathematical models of the nonlinear aerodynamic forces and moments are examined to illustrate the resulting types of dynamical behavior. The mathematical ideas that proved useful in the description of fluid flows are shown to be similarly useful in the description of flight dynamic behavior.

Chapman, G. T.↗

NASA NTRS1984

Tubing and cable cutting tool

A hand held hydraulic cutting tool was developed which is particularly useful in deactivating ejection seats in military aircraft rescue operations. The tool consists primarily of a hydraulic system composed of a fluid reservoir, a pumping piston, and an actuator piston. Mechanical cutting jaws are attached to the actuator piston rod. The hydraulic system is controlled by a pump handle. As the pump handle is operated the actuator piston rod is forced outward and thus the cutting jaws are forced together. The frame of the device is a flexible metal tubing which permits easy positioning of the tool cutting jaws in remote and normally inaccessible locations. Bifurcated cutting edges ensure removal of a section of the tubing or cable to thereby reduce the possibility of accidental reactivation of the tubing or cable being severed.

Mcsmith, D. D.↗

NASA NTRS1983

Analyses of large quasistatic deformations of inelastic bodies by a new hybrid-stress finite element algorithm - Applications

A new hybrid-stress finite element algorithm suitable for analyzing large quasistatic deformations of inelastic solids is presented and its feasibility and performance are demonstrated with examples. The algorithm provides extremely accurate bifurcation analysis which is stable with respect to variation in the finite element mesh, so long as the same type of element is used in every mesh. When the mesh element is varied, the result changes in a predictable manner. The method does not necessarily lead to an upper or lower bound for the critical load. An explicit forward gradient scheme is used to improve stability and is shown to be useful also for elongation-dominated deformations. The application of the method to the onset of necking in plane extension and to deformation and stress in plane extension of an elasticoviscous fluid with an array of cylindrical voids is given in detail.

Reed, K. W.↗

NASA NTRS1984

Numerical Investigation of unsteady inlet flow fields

The flow field within an unsteady, two-dimensional inlet is studied numerically, using a two dimensional Navier Stokes and a one-dimensional inviscid model. Unsteadiness is introduced by varying the outflow pressure boundary condition. The cases considered include outflow pressure variations which were a single pressure pulse, a rapid increase and a sine function. The amplitude of the imposed exit plane pressure disturbance varied between 1 percent and 20 percent of the mean exit pressure. At the higher levels of pressure fluctuation, the viscous flow field results bore little resemblance to the inviscid ones. The viscous solution included such phenomena as shock trains and bifurcating separation pockets. The induced velocity at the outflow plane predicted by the viscous model differs significantly from accoustical theory or small perturbation results.

Hsieh, T.↗

NASA NTRS1984

Natural convection in steady solidification - Finite element analysis of a two-phase Rayleigh-Benard problem

Galerkin finite-element approximations and Newton's method for solving free boundary problems are combined with computer-implemented techniques from nonlinear perturbation analysis to study solidification problems with natural convection in the melt. The Newton method gives rapid convergence to steady state velocity, temperature and pressure fields and melt-solid interface shapes, and forms the basis for algebraic methods for detecting multiple steady flows and assessing their stability. The power of this combination is demonstrated for a two-phase Rayleigh-Benard problem composed of melt and solid in a veritical cylinder with the thermal boundary conditions arranged so that a static melt with a flat melt-solid interface is always a solution. Multiple cellular flows bifurcating from the static state are detected and followed as Rayleigh number is varied. Changing the boundary conditions to approach those appropriate for the vertical Bridgman solidification system causes imperfections that eliminate the static state. The flow structure in the Bridgman system is related to those for the Rayleigh-Benard system by a continuous evolution of the boundary conditions.

Chang, C. J.↗

NASA NTRS1984

A numerical analysis of contact and limit-point behavior in a class of problems of finite elastic deformation

Finite element methods for the analysis of bifurcations, limit-point behavior, and unilateral frictionless contact of elastic bodies undergoing finite deformation are presented. Particular attention is given to the development and application of Riks-type algorithms for the analysis of limit points and exterior penalty methods for handling the unilateral constraints. Applications focus on the problem of finite axisymmetric deformations, snap-through, and inflation of thick rubber spherical shells.

Endo, T.↗

NASA NTRS1984

Evolution equations for Taylor vortices in the small-gap limit

The centrifugal instability of the viscous fluid flow between concentric circular cylinders in the small gap limit is considered. The amplitude of the Taylor vortex is allowed to depend on a slow time variable, a slow axial variable, and the polar angle. It is shown that the amplitude of the vortex cannot in general be described by a single amplitude equation. However, if the axial variations are periodic a single amplitude equation can be derived. In the absence of any slow axial variations it is shown that a Taylor vortex remains stable to wavy vortex perturbations. Furthermore, in this situation, stable nonaxisymmeric modes can occur but do not bifurcate from the Taylor vortex state. The stability of these modes is shown to be governed by a modified form of the Eckhaus criterion. Previously announced in STAR as N84-10501

Hall, P.↗

NASA NTRS1984

Flow in a differentially rotated cylindrical drop at moderate Reynolds number

Galerkin finite-element approximations are combined with computer-implemented perturbation methods for tracking families of solutions to calculate the steady axisymmetric flows in a differentially rotated cylindrical drop as a function of Reynolds number Re, drop aspect ratio and the rotation ratio between the two end disks. The flows for Reynolds numbers below 100 are primarily viscous and reasonably described by an asymptotic analysis. When the disks are exactly counter-rotated, multiple steady flows are calculated that bifurcate to higher values of Re from the expected solution with two identical secondary cells stacked symmetrically about the axial midplane. The new flows have two cells of different size and are stable beyond the critical value Re sub c. The slope of the locus of Re sub c for drops with aspect ratio up to 3 disagrees with the result for two disks of infinite radius computed assuming the similarity form of the velocity field. Changing the rotation ratio for exact counter-rotation ruptures the junction of the multiple flow fields into two separated flow families.

Harriott, G. M.↗

NASA NTRS1984

On the instability of a 3-dimensional attachment line boundary layer: Weakly nonlinear theory and a numerical approach

The instability of a three dimensional attachment line boundary layer is considered in the nonlinear regime. Using weakly nonlinear theory, it is found that, apart from a small interval near the (linear) critical Reynolds number, finite amplitude solutions bifurcate subcritically from the upper branch of the neutral curve. The time dependent Navier-Stokes equations for the attachment line flow have been solved using a Fourier-Chebyshev spectral method and the subcritical instability is found at wavenumbers that correspond to the upper branch. Both the theory and the numerical calculations show the existence of supercritical finite amplitude (equilibrium) states near the lower branch which explains why the observed flow exhibits a preference for the lower branch modes. The effect of blowing and suction on nonlinear stability of the attachment line boundary layer is also investigated.

Hall, P.↗

NASA NTRS1985

Observations, theoretical ideas and modeling of turbulent flows: Past, present and future

Turbulence was analyzed in a historical context featuring the interactions between observations, theoretical ideas, and modeling within three successive movements. These are identified as predominantly statistical, structural and deterministic. The statistical movement is criticized for its failure to deal with the structural elements observed in turbulent flows. The structural movement is criticized for its failure to embody observed structural elements within a formal theory. The deterministic movement is described as having the potential of overcoming these deficiencies by allowing structural elements to exhibit chaotic behavior that is nevertheless embodied within a theory. Four major ideas of this movement are described: bifurcation theory, strange attractors, fractals, and the renormalization group. A framework for the future study of turbulent flows is proposed, based on the premises of the deterministic movement.

Chapman, G. T.↗

NASA NTRS1984

Transition and mixing in impulsively started jets and vortex rings

A new method is used to analyze transition in impulsively started jets and vortex rings. The method uses similarity variables to reduce the equations for unsteady particle paths to a quasi-autonomous system with the Reynolds number as a parameter. The flow pattern is represented in terms of the phase portrait of this system and the structure of the flow is defined by its critical points. Flow transition is examined in terms of bifurcations in the topology of the phase portrait which occur as the Reynolds number is increased. There is no assumption that the flow is parallel or that it is subjected to small disturbances. The method of analysis, through straightforward, is new and lies outside the usual small disturbance theory used to determine the stability of various profile shapes.

Cantwell, B. J.↗

NASA NTRS1985

Postbuckling analysis using a general purpose code

A new capability for solving postbuckling problems in shell structures is described. The matrix theory to adapt Newton's method to nonlinear finite element shell analysis is outlined first. The matrix theory is directed at writing consistent linear algebratic equations for problems where the tangent stiffness matrix is singular or nearly singular. The matrix theory suggests a change of variables as part of the usual iterative procedure in Newton's method. The change of variables is shown to be feasible for introduction into the algorithm programmed in general purpose codes for finite element analysis of structures. Numerical results from a new option that has been programmed in an existing general purpose code are presented. The analysis of shell structures for collapse and for branching at bifurcation loads is illustrated by the numerical examples.

Thurston, G. A.↗

NASA NTRS1985

Periodic orbits of the general three-body problem for the sun-Jupiter-Saturn system

Two families of symmetric periodic orbits of the planar, general, three-body problem are presented. The masses of the three bodies include ratios equal to the sun-Jupiter-Saturn system and the periods of the orbits of Jupiter and Saturn are in a 2:5 resonance. The (linear) stability of the orbits are studied in relation to eccentricity and mass variations. The generation of the two families of periodic orbits follows a systematic approach and employs (numerical) continuation from periodic orbits of the first and second kind in the circular restricted problem to the elliptic restricted problem and from the circular and elliptic problems to the general problem through bifurcation phenomena relating the three dynamical systems. The approach also provides insight into the evolutionary process of periodic orbits continued from the restricted problems to the general problem.

Kwok, J. H.↗

NASA NTRS1985

The effect of topography on the evolution of unstable disturbances in a baroclinic atmosphere

A two layer spectral quasi-geostrophic model is used to simulate the effects of topography on the equilibria, their stability, and the long term evolution of incipient unstable waves. The flow is forced by latitudinally dependent radiative heating. Dissipation is in the form of Rayleigh friction. An analytical solution is found for the propagating finite amplitude waves which result from baroclinic instability of the zonal winds when topography is absent. The appearance of this solution for wavelengths just longer than the Rossby radius of deformation and disappearance of ultra-long wavelengths is interpreted in terms of the Hopf bifurcation theory. Simple dynamic and thermodynamic criteria for the existence of periodic Rossby solutions are presented. A Floquet stability analysis shows that the waves are neutral. The nature of the form drag instability of high index equilibria is investigated. The proximity of the equilibrium shear to a resonant value is essential for the instability, provided the equilibrium occurs at a slightly stronger shear than resonance.

Clark, J. H. E.↗

NASA NTRS1985

Qualitative properties of large buckled states of spherical shells

A system of 6th-order quasi-linear Ordinary Differential Equations is analyzed to show the global existence of axisymmetrically buckled states. A surprising nodal property is obtained which shows that everywhere along a branch of solutions that bifurcates from a simple eigenvalue of the linearized equation, the number of simultaneously vanishing points of both shear resultant and circumferential bending moment resultant remains invariant, provided that a certain auxiliary condition is satisfied.

Shih, K. G.↗

NASA NTRS1986

Formation of asymmetric separated flow past slender bodies of revolution at large angles of attack

The paper examines the problem of determining stationary positions of pairs of vortices of unequal intensity in the flow behind a cylinder modeling the axisymmetric separated flow past a slender body at large angles of attack. The possible asymmetric stationary positions of two vortices are calculated, and their stability with respect to small perturbations is determined. Bifurcations of the flow field with changes in vortex intensity are analyzed.

Goman, M. G.↗

NASA NTRS1985

Io: Mountains and crustal extension

It is argued that there is good reason to conclude that mountains on Io, like those on Earth, are subject to growth and decay. The decay of mountains will be assisted by the ability of SO sub 2 to rot silicate rock and by explosive escape of sub-surface SO sub 2 from aquifers (Haemus Mons is seen to be covered by bright material, presumably fallout from a SO sub 2 rich plume which had been active on the mountain flanks). On the west side of the massif at 10 degrees S, 270 degrees W a rugged surface consists of long ridges running perpendicular to the downslope direction, suggesting tectonic denudation with crustal blocks sliding down the mountain flank. Tectonic denudation may be assisted, as in the case of the Bearpaw Mountains, Montana by overloading mountain flanks with volcanic products. The surfaces of some massifs exhibit a well developed, enigmatic corrugated terrain, consisting of complex ridge systems. Ridges may bifurcate, anastomose to form closed depressions and form concentric loops. Taken together, observations of morphology, heat flux, surface deposits and styles of volcanism may point to the existence of lithosphere domains with distinct compositions and tectonic regimes.

Heath, M. J.↗