Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “attribute measurement”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Demonstration of thermal limit mean transverse energy from cesium antimonide photocathodes

The mean transverse energy (MTE) of electrons emitted from cathodes is a critical parameter that determines the brightness of electron beams for applications, such as x-ray free electron lasers, particle colliders, and ultrafast electron scattering experiments. Achieving a MTE close to the thermal limit is a key step toward realizing the full potential of electron sources in these applications. Cesium antimonide (Cs 3 Sb) is a technologically important material with a long history of use in photon detection and electron sources. The smallest MTE of electrons photoemitted from Cs 3 Sb has always been appreciably greater than the thermal limit and was attributed to surface non-uniformities. In this work, we present comprehensive measurements of the photoemission electron energy spectra (PEES), quantum efficiency, and MTE from Cs 3 Sb in a wide photoexcitation energy range from 1.5 to 2.3 eV. Our PEES measurements demonstrate a notably low photoemission threshold of around 1.5 eV, which is in contrast with the previously perceived threshold of 1.8–2.0 eV. Moreover, we show that the MTE at this threshold of 1.5 eV nearly converges to the thermal limit at 300 K. At 1.8 eV, the MTE measured is 40 meV, which is comparable to the previously reported value. Here, we conclude that this MTE value at 1.8 eV photon energy is not due to surface roughness effects as previously believed, but is a direct consequence of the excess energy.

43 PARTICLE ACCELERATORS↗
DOE OSTI2020

Photoabsorption, photoionization, and Auger processes at the carbon K edge in C H 3 I

The dynamics of photoabsorption, photoionization, and the associated Auger decay have been investigated at the carbon K edge in methyl iodide (CH 3 I) using linearly polarized synchrotron radiation. Ion yield measurements were used to investigate transitions in the pre-edge region due to excitations into either unoccupied valence or Rydberg states. The assignment of these transitions was achieved through comparison with theoretical x-ray absorption spectra calculated using time-dependent density functional theory, within the Tamm-Dancoff approximation. Several of the Rydberg states belonging to series converging onto the C1s ionization limit exhibit significant vibrational structure that is also interpreted using theoretical calculations. The C1s in CH 3 I photoelectron spectrum was measured, and the observed vibrational structure was assigned with the aid of theoretical predictions. Polarization dependent, resonantly excited, valence shell photoelectron spectra were recorded at photon energies coinciding with the C1s → σ*, C1s → 6sa1 and C1s → 6pe transitions in CH 3 I , thereby allowing photoelectron angular distributions to be determined. The nonresonantly excited C(KVV) Auger electron spectrum was measured and some of the features observed at high kinetic energies were attributed to transitions into valence orbitals possessing significant iodine character. The contributions of participator and spectator Auger decay to the resonantly excited photoelectron spectra have been assessed. The influence of participator decay appears minor whereas spectator decay results in the enhanced population of satellite states.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2020

Hyperon polarization in relativistic heavy ion collisions and axial U(1) symmetry breaking at high temperature

Experiments at the Relativistic Heavy Ion Collider have measured the net polarization of $\text{Λ}$ and $\bar{Λ}$ hyperons and attributed it to a coupling between their spin and the vorticity of the fluid created in heavy ion collisions, but how the spin comes to equilibrium with vorticity is an open problem. Recently, we found that vorticity fluctuations and helicity flip of strange quarks in quark-gluon plasma through perturbative QCD processes resulted in equilibration times far too long to be relevant. Here, we consider the Nambu-Jona-Lasinio model with the inclusion of the six-quark Kobayashi-Maskawa–'t Hooft interaction which breaks axial U(1). In this work, using instanton inspired models for the temperature dependence of the axial symmetry breaking, we find that constituent strange quarks can reach spin equilibrium at temperatures below about 170 MeV, just before they hadronize to form hyperons.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1972

Quartz microbalance studies of an adsorbed helium film.

The resonant frequency of a quartz crystal oscillating in the thickness-shear mode changes by virtue of the mass loading due to any type of film laid down on its surfaces. For a helium film only the normal fraction remains rigidly coupled to the substrate motion. Adsorption isotherms of He-4 measured with this technique show clear departures from conventional nonsuperfluid behavior. We attribute this effect to the onset and presence of superfluidity in the film.

Chester, M.↗
NASA NTRS1972

Measurement of operator workload in an information processing task

This was an experimental study to develop an improved methodology for measuring workload in an information processing task and to assess the effects of shift length and communication density (rate of information flow) on the ability to process and classify verbal messages. Each of twelve subjects was exposed to combinations of three shift lengths and two communication densities in a counterbalanced, repeated measurements experimental design. Results indicated no systematic variation in task performance measures or in other dependent measures as a function of shift length or communication density. This is attributed to the absence of a secondary loading task, an insufficiently taxing work schedule, and the lack of psychological stress. Subjective magnitude estimates of workload showed fatigue (and to a lesser degree, tension) to be a power function of shift length. Estimates of task difficulty and fatigue were initially lower but increased more sharply over time under low density than under high density conditions. An interpretation of findings and recommedations for furture research are included. This research has major implications to human workload problems in information processing of air traffic control verbal data.

Jenney, L. L.↗
NASA NTRS1975

Fluorescence detection of organic molecules in the Jovian atmosphere

A search for fluorescent emission due to the presence of possible organic molecules in the Jovian atmosphere is described. We first consider natural Jovian fluorescent emission excited by precipitating auroral particles. Due to our lack of knowledge of the Jovian precipitating particle energies and fluxes we next consider fluorescent emission excited by a laser system aboard a Jupiter spacecraft. Laser-induced fluorescence is routinely used to monitor trace constituents and pollutants in the terrestrial atmosphere. Several spacecraft laser systems are currently under development. Our calculations indicate that laser-induced fluorescent detection is approximately two orders of magnitude more sensitive than rocket ultraviolet measurements of possible Jovian absorption features at 2600 A that have been attributed to the presence of adenine or benzene.

Levine, J. S.↗
NASA NTRS1980

A continuation of base-line studies for environmentally monitoring space transportation systems at John F. Kennedy Space Center. Executive summary

Studies conducted in and around John F. Kennedy Space Center, Merrit Island, Florida were designed to establish baseline conditions for various attributes of the biotic and abiotic environment. Features were described and quantitatively measured. Certain condition were found to be appropriate for the detection and assessment of possible environmental perturbations caused by future NASA activities. These include plant communities, mammal populations, rainfall chemistry, fish populations, and the status of rare and endangered species. On the basis of statistical analysis of quantitative data and logistic considerations, it was possible to refine the kinds and amounts of measurements needed to evaluate perturbations in selected environmental components.

Stout, I. J.↗
NASA NTRS1985

Response of the middle atmosphere to Sco X-1

On the night of Mar. 9, 1983 (UT) at Punta Lobos Launch Site, Peru (12.5 deg S, 76.8 deg W, magnetic dip -0.7 deg), a sequence of sounding rockets was flown to study the electrical structure of the equatorial middle atmosphere and to evaluate perturbations on this environment induced by the X-ray star Sco X-1. The rocket series was anchored by two Nike Orion payloads (31.032 and 31.033) which were launched at 0327 and 0857 UT, near Sco X-1 star-rise and after it had attained an elevation angle of 70 deg E. An enhanced flux of X-rays was observed on the second Nike Orion flight (31.033). This increase is directly attributed to Sco X-1, both from the spectral properties of the measured X-ray distribution and by spatial information acquired from a spinning X-ray detector during the upleg portion of the 31.033 flight. Simultaneously, a growth in ion conductivity and density was seen to occur in the lower mesosphere between 60 and 80 km on the second flight, specifically in the region of maximum energy deposition by the Sco X-1 X-rays. The results imply the presence of a significant number of ionized heavy constituents within the lower mesosphere, with masses possibly in the submacroscopoic range.

Goldberg, R. A.↗
NASA NTRS1992

Comet nongravitational forces and meteoritic impacts

We have considered those comets whose original orbits have been determined to be hyperbolic when only planetary perturbations are accounted for. It is found that formally unbound incident trajectories correlate most confidently with orbits that have small perihelion distances and move in a retrograde sense relative to planetary motion. Arguments are presented that these results are not due to measurement error or to selection effects. We conclude that the phenomenon is attributable to enhanced volatility leading to abnormally large nongravitational forces. Since the effect is absent in the prograde small-perihelia population, increased insolation is not the sole explanation. It is suggested that the significance of the retrograde correlation is connected with a larger energy of relative motion between retrograde comets and a population of prograde ecliptic meteoroids which impact the comet mantle exposing the underlying volatiles. The subsequent enhanced outgassing is the cause of the larger nongravitational forces.

Matese, John J.↗
NASA NTRS1993

The ISM in the M82 starburst

We have observed (O 1) (63 microns) and (Si 2) (35 microns) in the central 700 pc of the starburst galaxy M82. The luminosities in these transitions are 7.1 x 10(exp 7) solar luminosity and 6.2 x 10(exp 7) solar luminosity, respectively, which are each approx. 0.15% of the bolometric luminosity from this region. The ratios of (O 1) line luminosity to (O 3), (Si 2) (35 microns), and to bolometric luminosities in M82 are similar to those in M42, M17, and Sgr A. These similarities, and the association of the bulk of the (O 1) and (Si 2) emission with the ionized emission, suggest that the dominant emission mechanism for (O 1) and (Si 2) in M82 is the same as in these Galactic regions, namely warm gas photodissociated by UV flux from the OB stars responsible for the nearby H 2 regions. We argue that shock or x ray heated gas or H 2 plasma is a minor contributor to the intensities of these fine structure lines. Both the (O 1) (53 microns) and the (Si 2) (35 microns) spectrum show an asymmetric line profile indistinguishable in shape from those of the (O 3) (52 and 88 microns) and (N 3) (57 microns) lines and similar to that of the more extended (C 2) 158 micron line measured previously in M82. We detect two distinct velocity components, which we attribute to emission from two regions at either end of the central bar, where the bar connects to an orbiting torus of neutral gas seen in H 1 and CO J = 1-0. We model separately the two velocity components and derive the physical conditions in these two regions. The clouds in these regions are small, R approx. 1-2 pc, have warm neutral gas surfaces, T approx. 200 K, and are concentrated with volume filling factors of approx. 0.02 and area filling factors of 1-5. The entire central region (R approx. 700 pc) is characterized by a large number, approx. 5 x 10(exp 4), of 2 x 10(exp 3) solar mass clouds with surface densities of approx. 3 x 10(exp 4) cm(exp -3), illuminated by FUV fluxes 10(exp 4) times the average local interstellar value for the Milky Way. These clouds reside in the harsh conditions of a starburst nucleus, with photoevaporation times of 10(exp 6) yr, and collision timescales only about an order of magnitude longer.

Lord, Steven↗
NASA NTRS1993

Atomic oxygen effects on LDEF experiment AO171

The Solar Array Materials Passive Long Duration Exposure Facility (LDEF) Experiment (SAMPLE), AO171, contained in total approximately 100 materials and materials processes with a 300 specimen complement. With the exception of experiment solar cell and solar cell modules, all test specimens were weighed before flight, thus allowing an accurate determination of mass loss as a result of space exposure. Since almost all of the test specimens were thermal vacuum baked before flight, the mass loss sustained can be attributed principally to atomic oxygen attack. The atomic oxygen effects observed and measured in five classes of materials is documented. The atomic oxygen reactivity values generated for these materials are compared to those values derived for the same materials from exposures on short term shuttle flights. An assessment of the utility of predicting long term atomic oxygen effects from short term exposures is given. This experiment was located on Row 8 position A which allowed all experiment materials to be exposed to an atomic oxygen fluence of 6.93 x 10(exp 21) atoms/cm(sup 2) as a result of being positioned 38 degrees off the RAM direction.

Whitaker, Ann F.↗
NASA NTRS1993

Analysis of differences between seating positions in simulators and orbiters

Crew comments indicate that Space Shuttle simulator seats place crewmembers in a position different from that of the actual Orbiter seats. The crew feel that they launch in a different position, and with a different reach and visibility, from that in which they had trained. This study examined three factors in differences between training and flight positions. Key dimensions, which were considered important to spatial orientation, were compared in the Orbiters and simulators. These were dimensions such as seat back to glare shield and seat pan to overhead. The differences between flight and training crew equipment, and how these differences may contribute to the problem were discussed with engineers and technicians responsible for the equipment. Eye position measurements were taken on subjects to assess any differences that could be attributed to different ingress methods in the Orbiters and the simulators. This report presents the data, analysis, and recommendations.

Mongan, Philip T.↗
NASA NTRS1994

Non-sea-salt sulfate and methanesulfonate at American Samoa

High-volume bulk aerosol samples have been collected at American Samoa (14.25 deg S, 170.58 deg W) on a semicontinuous basis since the system was erected as part of the Sea/Air Exchange Program (SEAREX) in March 1983. In this report we consider those samples collected through May 6, 1992. For most of this period the sample filters were changed once a week. However, during November 1989 and from May 10 to June 10, 1990, in conjunction with the aircraft missions of the NASA Global Backscatter Experiment (GLOBE), the filters were changed daily. All of the samples were analyzed for nonsea-salt (nss) SO4(2-) and NO3(-). Analyses for methanesulfonate (MSA) include all of the 53 daily samples, 22 weekly samples from March 19, 1983, through April 12, 1984, and 96 weekly samples from January 3, 1990, through May 6, 1992. The mean concentrations (in micrograms per cubic meter) were 0.37 for nss SO4(2-), 0.0229 for MSA, 0.114 for NO3(-), and 5.1 for Na(+). Nss SO4(2-) and MSA are strongly linearly correlated in these 171 samples (r(exp 2) = 0.66) and the regression intercept does not differ significantly from zero. The geometric mean (GM) nss SO4(2-)/MSA ratio, 18.1 +/- 0.9 (where +/- indicates the 95% confidence interval of the GM) is about 7% higher than had previously been reported for this station. The ratio exhibits no significant seasonal variation. Although the ratio appeared to be significantly lower in the May - June 1990 daily samples (GM = 15.3 +/- 1.2), a further examination of the results indicated that the variance of the measured ratios from 18.1 (the GM for the whole data set) was attributable almost exclusively to the typical random errors in the analyses as determined from the 1 sigma analytical uncertainties of 5% for MSA and SO4(2-) and 2% for Na(+).

Savoie, Dennis L.↗
NASA NTRS1996

SIR-C/X-SAR: Imaging Radar Analyses for Forest Ecosystem Modeling

Progress, significant results and future plans are discussed relating to the following objectives: (1) Ecosystem characterization using SIR-C/X-SAR and AirSAR data; (2) Improving radar backscatter models for forest canopies; and (3) Using SAR measurements and models with forest ecosystem models to improve inferences of ecosystem attributes and processes.

Ranson, K. Jon↗
NASA NTRS1997

Au Colloids Formed by Ion Implantation in Muscovite Mica Studied by Vibrational and Electronic Spectroscopes and Atomic Force Microscopy

Au was implanted into the (001) surface of Muscovite mica at an energy of 1.1 MeV and at doses of 1, 3, 6, and 10 x 10(exp 16) ions/cu cm. Optical spectra of the as-implanted samples revealed a peak at 2.28 eV (545 nm) which is attributed to the surface plasmon absorption of Au colloids. The infrared reflectance measurements show a decreasing reflectivity with increasing ion dose in the Si-O stretching region (900-1200 /cm). A new peak observed at 967 /cm increases with the ion dose and is assigned to an Si-O dangling bond. Atomic force microscopy images of freshly cleaved samples implanted with 6 and 10 x 10(exp 16) ions/sq cm indicated metal colloids with diameters between 0.9- 1.5 nm. AFM images of the annealed samples showed irregularly shaped structures with a topology that results from the fusion of smaller colloids.

Tung, Y. S.↗
NASA NTRS2015

Measurement of Ultraviolet Radiative Heating Augmentation in HIEST Reflected Shock Tunnel

Radiance measurements in air at enthalpies from 8-20 MJkg have been made over a 250mm diameter flat-faced test article in Japan Aerospace Exploration Agency's HIgh-Enthalpy Shock Tunnel (HIEST). Measurements were made in the ultraviolet region (200-400 nm wavelength) in an attempt to resolve the long-standing discrepancy between theoryand measurements of heat flux over a blunt body; this discrepancy is often attributed toradiation. The spectra obtained indicate the presence of atomic iron vapor in the flowfield.At the highest enthalpies, the radiance is at the blackbody limit. An attempt to model theradiance is made by taking a nominal CFD flowfield without any contamination productsand processing it through a line-by-line radiation simulation tool. Iron vapor is introducedinto the shocked gas ahead of the model and radiation computations are repeated; the molefraction of iron vapor is adjusted to match the data. For the higher enthalpy conditions, theradiance was strongly absorbed and it was necessary to adjust the temperature and NOdensity in the freestream to match the signal below 300 nm. Once the observed spectrawere satisfactorily matched, the radiance to the stagnation point was then computed. It isshown that the impurity radiation is sufficiently large to explain the discrepancy.

Shock Tunnel↗
NASA NTRS2005

Kinetic Studies of Iron Deposition Catalyzed by Recombinant Human Liver Heavy, and Light Ferritins and Azotobacter Vinelandii Bacterioferritin Using O2 and H2O2 as Oxidants

The discrepancy between predicted and measured H2O2 formation during iron deposition with recombinant heavy human liver ferritin (rHF) was attributed to reaction with the iron protein complex [Biochemistry 40 (2001) 10832-10838]. This proposal was examined by stopped-flow kinetic studies and analysis for H2O2 production using (1) rHF, and Azotobacter vinelandii bacterial ferritin (AvBF), each containing 24 identical subunits with ferroxidase centers; (2) site-altered rHF mutants with functional and dysfunctional ferroxidase centers; and (3) rccombinant human liver light ferritin (rLF), containing 110 ferroxidase center. For rHF, nearly identical pseudo-first-order rate constants of 0.18 per second at pH 7.5 were measured for Fe(2+) oxidation by both O2 and H2O2, but for rLF, the rate with O2 was 200-fold slower than that for H2O2 (k-0.22 per second). A Fe(2+)/O2 stoichiometry near 2.4 was measured for rHF and its site altered forms, suggesting formation of H2O2. Direct measurements revealed no H2O2 free in solution 0.5-10 min after all Fe(2+) was oxidized at pH 6.5 or 7.5. These results are consistent with initial H2O2 formation, which rapidly reacts in a secondary reaction with unidentified solution components. Using measured rate constants for rHF, simulations showed that steady-state H2O2 concentrations peaked at 14 pM at approx. 600 ms and decreased to zero at 10-30 s. rLF did not produce measurable H2O2 but apparently conducted the secondary reaction with H2O2. Fe(2+)/O2 values of 4.0 were measured for AvBF. Stopped-flow measurements with AvBF showed that both H2O2 and O2 react at the same rate (k=0.34 per second), that is faster than the reactions with rHF. Simulations suggest that AvBF reduces O2 directly to H2O without intermediate H2O2 formation.

Bunker, Jared↗
DOE OSTI2022

Tomo2Mesh: Fast Reconstruction and Visualization of Tomography Data in Mesh Format

Tomo2Mesh is an open-source project targeted towards real-time reconstruction, segmentation, and visualization of computed tomography (CT) data in mesh format. The CT reconstruction scheme is based on filtered back-projection of voxel subsets. The segmentation scheme uses a 3D convolutional neural network. To allow for fast, real-time reconstruction, voxel subsets are first identified by coarse reconstruction. The detail in specific regions of interest is improved through full reconstruction of voxel subsets in that region. Data structures are implemented to store and process voxel subsets. Finally, voxel data is labeled using connected components to detect disconnected regions such as voids whose morphological attributes (e.g., Feret diameter, principal axis orientation, local number density, size, etc.) can be measured also in real-time. Finally, a fast marching cubes implementation processes labeled voxel data into a triangular face mesh (vertices and faces) in .ply format for visualization in Paraview or other mesh visualization tools. The code provides a simple programming interface for detecting, classifying, and visualizing regions of interest based on morphology. For example, detected voids can be classified as round pores or extended cracks. Highly porous neighborhoods can be identified based on local number density. The mesh texture (or color) is assigned based these morphological attributes to allow smart visualization scenarios in real-time (e.g., show only long cracks). At the time of first release (July 2022), extraction of face mesh for visualization for raw CT data from a 2 megapixel camera would take between 1-5 minutes for most scenarios.

TEKAWADE, ANIKET↗