Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “atomic ordering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Quantum-mechanical calculation of three-dimensional atom-diatom collisions in the presence of intense laser radiation

A formalism is presented for describing the collision of fluorine with the hydrogen molecule in the presence of intense radiation. For a laser frequency on the order of the spin-orbit splitting of fluorine, the interaction of the molecular system with the radiation occurs at relatively long range where, for this system, the electric dipole is vanishingly small. Hence the interaction occurs due to the magnetic dipole coupling. Even so, at low collision energies a substantial enhancement of the quenching cross section is found for a radiation intensity of 10 to the 11th W/sq cm.

Devries, P. L.↗

Development of a molecular beam technique to study early solar system silicon reactions

Silicon monoxide is one of the major gas phase silicon bearing components observed in astronomical environments. Silicon oxide serves as the major rock forming material for terrestrial and meteoritic bodies. It is known that several gas phase reactions produce mass independent isotopic fractionations which possess the same delta(O-17)/delta(O-18) ratio observed in Allende inclusions. The general symmetry dependence of the chemically produced mass independent isotopic fractionation process suggests that there are several plausible reactions which could occur in the early solar system which may lead to production of the observed meteoritic oxygen isotopic anomalies. An important component in exploring the role of such processes is the need to experimentally determine the isotopic fractionations for specific reactions of relevance to the early solar system. It has already been demonstrated that atomic oxygen reaction with CO, a major nebular oxygen bearing species, produces a large (approximately 90 percent), mass independent isotopic fractionation. The next hurdle regarding assessing the involvement of symmetry dependent isotopic fractionation processes in the pre-solar nebula is to determine isotopic fractionation factors associated with gas phase reactions of metallic oxides. In particular, a reaction such as O + SiO yields SiO2 is a plausible nebular reaction which could produce a delta(O-17) is approximately delta(O-18) fractionation based upon molecular symmetry considerations. While the isotopic fractionations during silicate evaporation and condensation have been determined, there are no isotopic studies of controlled, gas phase nucleation processes. In order to carefully control the reaction kinetics, a molecular beam apparatus has been constructed. This system produces a supersonic, collimated beam of SiO molecules which is reacted with a second beam of oxygen atoms. An important feature of molecular beams is that they operate at sufficiently low pressures and high temperatures in the jet that avalanche nucleation and clustering processes may be avoided.

Dong, Q. W.↗

Observations of the Age of Air from the Northern Hemisphere Midlatitude Surface

Understanding and modeling the interhemispheric transport (IHT) of trace gases and aerosols is important for interpreting past (and projecting future) changes in atmospheric composition. One IHT measure -- the mean age since air was last at the Northern Hemisphere (NH) midlatitude surface – represents a fundamental property of tropospheric transport that can be estimated from measurements of sulfur hexafluoride (SF6). Here we use SF6 measurements obtained from the recent NASA Atmospheric Tomography Mission (ATom) to construct observational estimates of the mean age throughout the troposphere. We compare the ATom based ages, which span all four seasons during the period 2016-2018 over both the Pacific and Atlantic Oceans, with previous in situ-based estimates obtained from the HIAPER Pole‐to‐Pole Observations (HIPPO) project, which are available only for the Pacific. In order to interpret the observed variations in mean age and their relationship with the large-scale flow we use simulations of the Goddard Earth Observing System (GEOS) general circulation model, constrained with meteorological fields derived from the Modern-Era Retrospective analysis for Research and Applications, Version 2 (MERRA-2), performed over the entire MERRA-2 period (including ATom). We confirm results from previous studies showing that the model ages are biased old compared to the observational estimates. However, we also show that this model bias is reduced in more recent years, which we interpret in terms of changes in the latitudinal distribution of SF6 emissions over the 2000s.

interhemispheric transport (IHT)↗

The Response of the Ionospheric Cusp to the Solar Wind Through Two Perspectives: Low Energy Charged Particle In-Situ Measurements and Low-Energy Neutral Atom Imaging

The Imager for Magnetopause-to-Aurora Global Exploration (IMAGE) mission provides a new perspective on the study of the response of the magnetosphere/ionosphere system to changing solar wind conditions, particularly the variability of ion outflow. Learning to interpret this new type of data becomes an essential step in the process of melding these results with the wealth of in-situ charged particle observations obtained over the past 25 years. In order to understand how the in-situ data correspond to and contrast with IMAGE results we will perform a conjunctive study of event data from two instruments to shed light on the coupling of the solar wind and ionosphere from these different perspectives. We will use the Low Energy Neutral Atom instrument (LENA) which images energetic neutral atom emissions from upward flowing ionospheric ions and the Thermal Ion Dynamics Instrument (TIDE) on the Polar satellite which measures in-situ ion outflow from 0.3-300 eV. Our primary goal will be to understand how comparing the imaging and in-situ perspectives can aid in the analysis of both data sets.

Coffey, V. N.↗

On the detectability of key-MeV solar protons through their nonthermal Lyman-alpha emission

The intensity and timescale of nonthermal Doppler-shifted hydrogen L alpha photon emission as diagnostics of 10 keV to 10 MeV protons bombarding the solar chromosphere during flares are investigated. The steady-state excitation and ionization balance of the proton beam are determined, taking into account all important atomic interactions with the ambient chromosphere. For a proton energy flux comparable to the electron energy flux commonly inferred for large flares, L alpha wing intensities orders of magnitude larger than observed nonflaring values were found. Investigation of timescales for ionization and charge exchange leads researchers to conclude that over a wide range of values of mean proton energy and beam parameters, Doppler-shifted nonthermal L alpha emission is a useful observational diagnostic of the presence of 10 keV to 10 MeV superthermal proton beams in the solar flare chromosphere.

Canfield, R. C.↗

Spectrum of squeezing in resonance fluorescence

A spectral analysis of the squeezing in resonance fluorescence is accomplished via a study of a phase sensitive correlation function. In the case of resonance fluorescence from a two-level system, the initial state is a coherent state for the laser mode, a vacuum for the other states of the radiation field, and the atoms in the lower level. Maximum squeezing for resonance excitation is obtained for near resonant frequencies of the fluorescent light. Possible experimental configurations are discussed in order to detect spectral squeezing.

Collett, M. J.↗

The vibrational frequencies of ozone

The singles and doubles coupled-cluster (CCSD) method is used, together with the recently proposed CCSD(T) and CCSDT-1 methods, to determine the equilibrium structure and harmonic frequencies of ozone at various levels, on the basis of large one-particle basis sets. It is demonstrated that f-type functions are required in order to obtain quantitative accuracy for the equilibrium structure and harmonic frequencies. The CCSD(T) level of theory, in conjunction with a (4s 3p 2d 1f) atomic natural orbital set, yields an equilibrium geometry and harmonic frequencies that are in excellent agreement with experimental results; an effort has accordingly been made to determine the cubic and quartic force constants, and evaluate the anharmonic corrections to the fundamental vibrational frequencies.

Lee, Timothy J.↗

Advanced electric propulsion research - 1990

An experimental study of impingement current collection on the accelerator grid of an ion thruster is presented. The equipment, instruments, and procedures being used to conduct the study are discussed. The contribution to this current due to charge-exchange ions produced close to the grid is determined using a volume-integration procedure and measured ion beam current design, computed neutral atom density and measured beam plasma potential data. This current, which is expected to be almost equal to that measured directly, is found to be an order of magnitude less. The impingement current determined by integrating the current density of ambient ions in the beam plasma close to the grid is found to agree with the directly measured impingement current. Possible reasons for the disagreement between the directly measured and volume integrated impingement currents are discussed.

Monheiser, Jeffery M.↗

Concept for Inclusion of Analytical and Computational Capability in Optical Plume Anomaly Detection (OPAD) for Measurement of Neutron Flux

Researchers are working on many konts to make possible high speed, automated classification and quantification of constituent materials in numerous environments. NASA's Marshall Space Flight Center has implemented a system for rocket engine flow fields/plumes; the Optical Plume Anomaly Detection (OPAD) system was designed to utilize emission and absorption spectroscopy for monitoring molecular and atomic particulates in gas plasma. An accompanying suite of tools and analytical package designed to utilize information collected by OPAD is known as the Engine Diagnostic Filtering System (EDIFIS). The current combination of these systems identifies atomic and molecular species and quantifies mass loss rates in H2/O2 rocket plumes. Additionally, efforts are being advanced to hardware encode components of the EDIFIS in order to address real-time operational requirements for health monitoring and management. This paper addresses the OPAD with its tool suite, and discusses what is considered a natural progression: a concept for migrating OPAD towards detection of high energy particles, including neutrons and gamma rays. The integration of these tools and capabilities will provide NASA with a systematic approach to monitor space vehicle internal and external environment.

Patrick, M. Clinton↗

Degradation of Spacesuit Fabrics in Low Earth Orbit

Six samples of pristine and dust-abraded outer layer spacesuit fabrics were included in the Materials International Space Station Experiment-7, in which they were exposed to the wake-side low Earth orbit environment on the International Space Station (ISS) for 18 months in order to determine whether abrasion by lunar dust increases radiation degradation. The fabric samples were characterized using optical microscopy, optical spectroscopy, field emission scanning electron microscopy, atomic force microscopy, and tensile testing before and after exposure on the ISS. Comparison of pre- and post-flight characterizations showed that the environment darkened and reddened all six fabrics, increasing their integrated solar absorptance by 7 to 38 percent. There was a decrease in the ultimate tensile strength and elongation to failure of lunar dust abraded Apollo spacesuit fibers by a factor of four and an increase in the elastic modulus by a factor of two.

Gaier, James R.↗

Electron-Impact Excitation Cross Sections for Modeling Non-Equilibrium Gas

In order to provide a database for modeling hypersonic entry in a partially ionized gas under non-equilibrium, the electron-impact excitation cross sections of atoms have been calculated using perturbation theory. The energy levels covered in the calculation are retrieved from the level list in the HyperRad code. The downstream flow-field is determined by solving a set of continuity equations for each component. The individual structure of each energy level is included. These equations are then complemented by the Euler system of equations. Finally, the radiation field is modeled by solving the radiative transfer equation.

Electron↗

Progress Towards Modeling the Ablation Response of NuSil-Coated PICA

The Mars Science Laboratory (MSL) Entry, Descent and Landing Instrumentation (MEDLI) collected in-flight data largely used by the ablation community to verify and validate physics-based models for the response of the Phenolic Impregnated Carbon Ablator (PICA) material [1-4]. MEDLI data were recently used to guide the development of NASA’s high-fidelity material response models for PICA, implemented in the Porous material Analysis Toolbox based on OpenFOAM (PATO) software [5-6]. A follow-up instrumentation suite, MEDLI2, is planned for the upcoming Mars 2020 mission [7] after the large scientific impact of MEDLI. Recent analyses performed as part of MEDLI2 development draw the attention to significant effects of a protective coating to the aerothermal response of PICA. NuSil, a silicone-based overcoat sprayed onto the MSL heatshield as contamination control, is currently neglected in PICA ablation models. To mitigate the spread of phenolic dust from PICA, NuSil was applied to the entire MSL heatshield, including the MEDLI plugs. NuSil is a space grade designation of the siloxane copolymer, primarily used to protect against atomic oxygen erosion in the Low Earth Orbit environment. Ground testing of PICA-NuSil (PICA-N) models all exhibited surface temperature jumps of the order of 200 K due to oxide scale formation and subsequent NuSil burn-off. It is therefore critical to include a model for the aerothermal response of the coating in ongoing code development and validation efforts.

Meurisse, Jeremie B.↗

Mass-loading and diffusion-loss rates of the Io plasma torus

Limits to the mass-loading and diffusion-loss rates of ions in the Io plasma torus have been calculated on the assumption that observed optical emissions are controlled by electron-ion collisions. Calculations of the yield of emission from the vicinity of Io limit the mass-loading rate to the order of 10 to the 27th per s for S II or O II, on the grounds that electron-excited emissions associated with the location of Io have not been observed in the optical spectrum. This mass-loading limit is dependent on the assumptions that Io is the source of torus particles and that most of the neutral atoms are converted to ions within 1 R(J) of Io. According to the calculations presented below, the observed partitioning of sulfur ion species in the hot torus at the time of Voyager 1 encounter indicates that the diffusion-loss time of the ions is of the order of 1/D = 100 days. The two results limiting the mass-loading and diffusion-loss rates are compatible and suggest that the energy required to maintain the observed radiated power cannot be supplied by acceleration of ions formed at Io in Jupiter's rotating magnetic field.

Shemansky, D. E.↗

Auger electron spectroscopy study of surface segregation in the binary alloys copper-1 atomic percent indium, copper-2 atomic percent tin, and iron-6.55 atomic percent silicon

Auger electron spectroscopy was used to examine surface segregation in the binary alloys copper-1 at. % indium, copper-2 at. % tin and iron-6.55 at. % silicon. The copper-tin and copper-indium alloys were single crystals oriented with the /111/ direction normal to the surface. An iron-6.5 at. % silicon alloy was studied (a single crystal oriented in the /100/ direction for study of a (100) surface). It was found that surface segregation occurred following sputtering in all cases. Only the iron-silicon single crystal alloy exhibited equilibrium segregation (i.e., reversibility of surface concentration with temperature) for which at present we have no explanation. McLean's analysis for equilibrium segregation at grain boundaries did not apply to the present results, despite the successful application to dilute copper-aluminum alloys. The relation of solute atomic size and solubility to surface segregation is discussed. Estimates of the depth of segregation in the copper-tin alloy indicate that it is of the order of a monolayer surface film.

Ferrante, J.↗

On the energy deposition of photoelectrons in the atmosphere of Venus

Vertical components of photoelectron fluxes in the atmosphere of Venus are computed by solving an appropriate form of the Boltzmann equation in the cases where there is no flux of either photoelectrons or solar-wind particles across the ionopause and where photoelectrons are free to escape from the atmosphere. It is assumed that Venus has no magnetic field and that the atmosphere is composed of carbon dioxide, atomic oxygen, and helium. The results are plotted as a function of altitude for several energies in the range from 100 eV to a cutoff of the order of 1 eV. Heating rates for the two upper boundary conditions and the case of no spatial transport are determined which show that transport effects dominate at altitudes greater than about 200 km. Electron temperatures are calculated for the adopted model atmosphere and ionosphere by solving the pertinent conservation equation, and excitation rates are computed for the CO Cameron band as well as the CO2(+) A and B bands.

Mccormick, P. T.↗

The threshold laws for electron-atom and positron-atom impact ionization

The Coulomb-dipole theory is employed to derive a threshold law for the lowest energy needed for the separation of three particles from one another. The study focuses on an electron impinging on a neutral atom, and the dipole is formed between an inner electron and the nucleus. The analytical dependence of the transition matrix element on energy is reduced to lowest order to obtain the threshold law, with the inner electron providing a shield for the nucleus. Experimental results using the LAMPF accelerator to produce a high energy beam of H- ions, which are then exposed to an optical laser beam to detach the negative H- ion, are discussed. The threshold level is found to be confined to the region defined by the upper bound of the inverse square of the Coulomb-dipole region. Difficulties in exact experimental confirmation of the threshold are considered.

Temkin, A.↗

Parsec-Scale Penetration of UV into Molecular Clouds: CII 158 Micron Mapping of W3, NGC 1977, and NGC 2023

The spatial distribution of the 158 microns CII fine structure line in the galactic sources W3, NGC 1977, and NGC 2023 is mapped. The emission arises from warm (100 to 300 K), dense photodissociation regions at the surface of molecular gas. In all three sources, the emission extends over parsec scales or greater. For W3 and NGC 1977, where the UV source/molecular cloud geometry presents an edge on view of the variation of CII intensity into the molecular gas, two dimensional models of the CII emission which include the effects of gas clumping and scattering by dust on the transport of UV photons are constructed. The observed CII distribution and intensity is well modeled by a clumpy or filamentary distribution to the molecular gas, with a clump/interclump gas density ratio of 100 or more, which allows deep penetration of carbon ionizing UV photons into the clouds. The penetration of UV into clumped molecular clouds may also explain the extended far IR continuum emission from these sources. The total luminosity of CII emission from a clumpy molecular cloud with adjacent or embedded octave band stars can be as much as an order of magnitude higher than the CII luminosity of a uniform cloud. In addition, the extended penetration of UV into molecular clouds will affect the abundances of atomic and molecular species and increase the fractional ionization of interclump gas and UV illuminated clump surfaces.

Howe, J. E.↗

Determination of copper in tap water using solid-phase spectrophotometry

A new application of ion exchange films is presented. The films are used in a simple analytical method of directly determining low concentrations of Cu(2+) in aqueous solutions, in particular, drinking water. The basis for this new test method is the color and absorption intensity of the ion when adsorbed onto the film. The film takes on the characteristic color of the adsorbed cation, which is concentrated on the film by many orders of magnitude. The linear relationship between absorbance (corrected for variations in film thickness) and solution concentration makes the determinations possible. These determinations agree well with flame atomic absorption determinations.

Hill, Carol M.↗