SEARCH · Engineering Papers

Results for “actual”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

All sources NASA NTRS DOE OSTI

NASA NTRS1983

Temperature histories of commercial flights at severe conditions from GASP data

The thermal environment of commercial aircraft from a data set gathered during the Global Atmospheric Sampling Program (GASP) is studied. The data set covers a four-year period of measurements. The report presents plots of airplane location and speed and atmospheric temperature as functions of elapsed time for 35 extreme-condition flights, selected by minimum values of several temperature parameters. One of these parameters, the severity factor, is an approximation of the in-flight wing-tank temperature. Representative low-severity-factor flight histories may be useful for actual temperature-profile inputs to design and research studies. Comparison of the GASP atmospheric temperatures to interpolated temperatures from National Meteorological Center and Global Weather Central analysis fields shows that the analysis temperatures are slightly biased toward warmer than actual temperatures, particularly over oceans and at extreme conditions.

Jasperson, W. H.↗

NASA NTRS1983

Interpreting the solar wind ionization state

The ionization state of the solar coronal expansion is frozen within a few solar radii of the solar photosphere, and spacecraft measurements of the solar wind heavy ion charge state can therefore yield information about coronal conditions (e.g., electron temperature). Previous interpretations of the frozen-in ionization state have always assumed that in the coronal freezing-in region, (1) all heavy ions flow at the same bulk speed as protons, (2) the electron velocity distribution function is Maxwellian, and (3) conditions vary in space but not in time. The consequences of relaxing these assumptions for the interpretation of solar wind charge state measurements are examined. It is found that: (1) the temperature inferred by traditional interpretation of the interplanetary ionization state overestimates (underestimate) the actual coronal electron temperature if higher ion charge stages flow systematically faster (slower) than lower stages at the coronal freezing radius; (2) temperatures inferred from relative abundance measurements of ion-charge-stages with high ionization potentials moderately overestimate the actual coronal electron temperature if the high-energy tail of the coronal electron velocity distribution is enhanced relative to a Maxwellian distribution; (3) the propagation of a disturbance, e.g., a shock wave, through the corona can strongly affect the frozen-in charge state, but only over a time (a few times ten minutes) corresponding to the coronal transit time for the disturbance.

Owocki, S. P.↗

NASA NTRS1984

Doppler System Phase Transfer Functions for a System with an X-band Uplink and X-band and S-band Downlinks

A new DSN RF system is being developed that transmits at X-band and receive at both X-band and S-band. End-to-end tests are planned to measure the phase stability of this system. Equations for the phase transfer functions between the error sources in the system and the X-band and S-band Doppler extractor outputs are derived. This analysis considers both test modes, using a test translator, and actual spacecraft tracking where the spacecraft is at some distance from the DSN station. The results indicate that the proposed end-to-end tests will not accurately reflect the error that occurs during actual spacecraft tracking.

Koerner, M. A.↗

NASA NTRS1984

Remote Sensing of Earth Terrain

Theoretical models that are useful and practical in relating remote sensing data to the important physical parameters characterizing Earth terrain are developed. The development of models that are useful in data analysis and interpretation, scene simulation, and developing new remote sensing approaches and techniques is discussed. Numerous theoretical models that are applicable to the active and passive remote sensing of plowed fields, atmospheric precipitation, vegetation, and snow fields were developed. The radiative transfer theory is used to interpret the active and passive data as a function of rain rate. Both the random medium model and the discrete scatterer model is used to study the remote sensing of vegetation fields. Due to the non-spherical geometry of the scatterers there is strong azimuthal dependence in the observed data. Thus, the anisotropic random medium model and the discrete scatterer model with nonspherical particles was developed. In order to relate the remote sensing data to the actual physical parameters, the scattering of electromagnetic waves from randomly distributed dielectric scatterers was studied. Both the rigorous random discrete scatterer theory and the strong fluctuation theory are used to derive the backscattering cross section in terms of the actual physical parameters and the results agree well with the data obtained from the snow fields.

Kong, J. A.↗

NASA NTRS1983

The SIFT Code Specification

The specification of Software Implemented Fault Tolerance (SIFT) consists of two parts, the specifications of the SIFT models and the specifications of the SIFT PASCAL program which actually implements the SIFT system. The code specifications are the last of a hierarchy of models describing the operation of the SIFT system and are related to the SIFT models as well as the PASCAL program. These Specifications serve to link the SIFT models to the running program. The specifications are very large and detailed and closely follow the form and organization of the PASCAL code. In addition to describing each of the components of the SIFT code, the code specifications describe the assumptions of the upper SIFT models which are required to actually prove that the code will work as specified. These constraints are imposed primarily on the schedule tables.

Source record↗

NASA NTRS1983

Verification of Numerical Algorithms

The following strategy is suggested for specification and proof: (1) Defer the construction of a formal program specification with respect to I/O assertions unit the correctness of the program with respect to an abstract mathematical model of program intent is demonstrated. (2) Prove that an abstract machine (using infinite precision arithmetic) would compute that object exactly. (3) Prove that the computational sequences of arithmetic operations that occur in the abstract machine must be precisely the same at every step as those occurring on an actual machine (with finite precision arithmetic), executing the same program. (4) Use a Verification Conditions VC-generator that knows about the semantics of arithmetic operations to annotate the program with assertions that bound (or in some circumstances estimate) the difference between the actual machine state variables and the corresponding ones of the abstract machine. Construct the formal program specification by combining the verification conditions into theorems about computational error that can be proved with mechanical assistance.

Source record↗

NASA NTRS1984

Solar cell degradation in proton radiation orbits

Significant discrepancies have been observed between predicted and actual in-orbit silicon solar array degradation in orbits other than LEO (low Earth orbits) and GEO (geosynchronous orbit). These discrepancies have been diagnosed to arise probably from a combination of a lack of appropriate solar cell test data and from inadequacies in the models that relate the unidirectional and mono-energetic proton test data to the omnidirectional flux-energy spectra actually found in orbit. Relative damage coefficients and solar cell power outputs were discussed, and also were presented in graph form. Silicon and gallium arsenide solar cells were considered.

Rauschenbach, H. S.↗

NASA NTRS1984

Three-dimensional computer model for the atmospheric general circulation experiment

An efficient, flexible, three-dimensional, hydrodynamic, computer code has been developed for a spherical cap geometry. The code will be used to simulate NASA's Atmospheric General Circulation Experiment (AGCE). The AGCE is a spherical, baroclinic experiment which will model the large-scale dynamics of our atmosphere; it has been proposed to NASA for future Spacelab flights. In the AGCE a radial dielectric body force will simulate gravity, with hot fluid tending to move outwards. In order that this force be dominant, the AGCE must be operated in a low gravity environment such as Spacelab. The full potential of the AGCE will only be realized by working in conjunction with an accurate computer model. Proposed experimental parameter settings will be checked first using model runs. Then actual experimental results will be compared with the model predictions. This interaction between experiment and theory will be very valuable in determining the nature of the AGCE flows and hence their relationship to analytical theories and actual atmospheric dynamics.

Roberts, G. O.↗

NASA NTRS1983

Landsat 4 results and their implications for agricultural surveys

Progress on defining the minimum Landsat-4 data characteristics needed for agricultural information in the U.S. and assessing the value-added capability of current technology to extract that level of information is reported. Emphasis is laid on the thematic mapper (TM) data and the ground processing facilities. TM data from all 7 bands for a rural Arkansas scene were examined in terms of radiometric, spatial, and geometric fidelity characteristics. Another scene sensed over Iowa was analyzed using three two-channel data sets. Although the TM data were an improvement over MSS data, no value differential was perceived. However, the development of further analysis techniques is still necessary to determine the actual worth of the improved sensor capabilities available with the TM, which actually has an MSS within itself.

Erickson, J. D.↗

NASA NTRS1983

Influence of unbalance on the nonlinear dynamical response and stability of flexible rotor-bearing systems

In this paper, some of the effects of unbalance on the nonlinear response and stability of flexible rotor-bearing systems is presented from both a theoretical and experimental standpoint. In a linear system, operating above its stability threshold, the amplitude of motion grows exponentially with time and the orbits become unbounded. In an actual system, this is not necessarily the case. The actual amplitudes of motion may be bounded due to various nonlinear effects in the system. These nonlinear effects cause limit cycles of motion. Nonlinear effects are inherent in fluid film bearings and seals. Other contributors to nonlinear effects are shafts, couplings and foundations. In addition to affecting the threshold of stability, the nonlinear effects can cause jump phenomena to occur at not only the critical speeds, but also at stability onset or restabilization speeds.

Gunter, E. J.↗

NASA NTRS1982

Internal heat transfer coefficients of porous metals

The internal heat transfer coefficients of porous metals have been experimentally determined in order to develop correlations between approximately defined Nusselt and Reynolds numbers. Scaled-up models of porous materials, and actual porous metal specimens, were subjected to countercurrent heat and mass transfer boundary conditions. Solid and gas phase temperatures were measured for both the scaled-up models and the actual porous metal specimens. On the basis of these measurements, the average internal heat transfer coefficient was evaluated, and a correlation between the Nusselt and Reynolds numbers was derived.

Kar, K. K.↗

NASA NTRS1984

Effects of mass motions on solar emission measures inferred from transition-region emission lines

Extreme ultraviolet emission line intensities predicted by a numerical model which includes nonequilibrium ionization balance are used as input 'observational' intensities to calculate volume emission measures following a standard method which assumes ionization equilibrium. These 'observational' emission measures are then compared with the actual emission measure distribution in the atmospheric model. For static equilibrium models, the two sets of emission measures are in good agreement. When mass motions are present, the emission measures calculated from the line intensities differ significantly from the actual values.

Mariska, J. T.↗

NASA NTRS1984

Modeling algorithm execution time on processor arrays

An approach to modelling the execution time of algorithms on parallel arrays is presented. This time is expressed as a function of the number of processors and system parameters. The resulting model has been applied to a parallel implementation of the conjugate-gradient algorithm on NASA's FEM. Results of experiments performed to compare the model predictions against actual behavior show that the floating-point arithmetic, communication, and synchronization components of the parallel algorithm execution time were correctly modelled. The results also show that the overhead caused by the interaction of the system software and the actual parallel hardware must be reflected in the model parameters. The model has been used to predict the performance of the conjugate gradient algorithm on a given problem as the number of processors and machine characteristics varied.

Adams, L. M.↗

NASA NTRS1984

On the implementation of modal filters for control of structures

The most common technique for the control of structures is modal control. In modal control, the differential equations in terms of actual coordinates are replaced by a set of ordinary differential equations in terms of the modal coordinates known as modal equations. In designing feedback controls in conjunction with the modal equations, one must know the modal states for the modes targeted for control. The sensors measure actual states, however. The modal states can be estimated by means of a Luenberger observer or modal filters. The modal filters produce estimates of the modal states from distributed measurements of the states. If distributed measurements are not available, then they can be reconstructed from measurements at discrete points via interpolation. This paper examines various questions associated with the implementation of modal filters, such as the effect of choice of interpolation functions and sensors locations, as well as of measurement errors, on the state estimation process. The method is demonstrated by means of two numerical examples.

Meirovitch, L.↗

NASA NTRS1981

Analysis of Barkhausen noise to assess shrink fit stresses

The possible application of Barkhausen Noise Analysis to assess shrink fit stresses in steel bushings was investigated. Ten specimens of four different size NAS steel bushings were used in experiments to determine the relationship between the Barkhausen signal amplitude and the hoop-stress in the bushings. This relationship was investigated for specimens which were loaded by a simple clamping fixture and specimens subjected to actual thermal interference fits. The results show that while the relationship of Barkhausen signal amplitude to hoop stress is predictable for specimens loaded by the simple clamping fixture, the relationship was less predictable for actual thermal fit bushings. The variation in results could possibly be due to variable levels of axial stress produced by the differential thermal expansion of the steel and aluminum.

Nondestructive testing↗

NASA NTRS1984

Shear deformation plate continua of large double-layered space structures

The energy equivalence to construct equivalent continua for the actual lattice structure is described. An energy equivalent continuum is defined as that which has the same amount of strain and kinetic energies stored in it as the original lattice structure when both are subjected to the same loading conditions. The equivalent continuum is characterized by its strain and kinetic energies from which the constitutive relations and the equations of motion can be derived. A simple method to model large rigid jointed lattices as continuous media with couple stresses is presented. The transition from the discrete system to the continuous medium is achieved by expanding the displacements and the rotations of the nodal points in a Taylor series about a suitable chosen origin. Basic kinematic assumptions are introduced to insure that the assumptions used in deriving the governing equations of the modeled continuum are satisfied. The number of terms retained in the Taylor series expansion will depend upon the properties to be evaluated. This implies that the kind of continuum needed to model from the discrete lattice, before the actual properties are derived was to predetermined.

Hefzy, M. S.↗

NASA NTRS1984

Enhanced TCAS 2/CDTI traffic Sensor digital simulation model and program description

Digital simulation models of enhanced TCAS 2/CDTI traffic sensors are developed, based on actual or projected operational and performance characteristics. Two enhanced Traffic (or Threat) Alert and Collision Avoidance Systems are considered. A digital simulation program is developed in FORTRAN. The program contains an executive with a semireal time batch processing capability. The simulation program can be interfaced with other modules with a minimum requirement. Both the traffic sensor and CAS logic modules are validated by means of extensive simulation runs. Selected validation cases are discussed in detail, and capabilities and limitations of the actual and simulated systems are noted. The TCAS systems are not specifically intended for Cockpit Display of Traffic Information (CDTI) applications. These systems are sufficiently general to allow implementation of CDTI functions within the real systems' constraints.

Goka, T.↗

NASA NTRS1982

Benchmark notch test for life prediction

Aircraft gas turbine engine components are subjected to severe stress, temperature, and environmental conditions. Economic and reliabilty demands have prompted inordinate effort in development of analytic methods to predict stresses and strains in aircraft engines. There remains, however, the need to check or verify these analytical methodologies against actual experimental data measurements. The laser interferometric strain displacement gage was recognized as having the potential to accomplish this task and was employed in this program. The actual strains incurred at the root of a discontinuity in cyclically loaded test samples subjected to inelastic deformation at high temperature where creep deformation readily occur were measured. The steady-state, cyclic stress-strain response at the root of the discontinuity in the tested samples was analyzed for comparison with the measured results. A comprehensive set of local notch root strain measurements for a variety of load patterns in an Inconel 718 notch specimen at 649 C (1200 F) was obtained and documented using the laser interferometric strain displacement gage.

Domas, P. A.↗