Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “active”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Active‐Source Seismic Imaging of Fault Re‐Activation and Leakage: An Injection Experiment at the Mt Terri Rock Laboratory, Switzerland

Abstract We conducted a time‐lapse seismic experiment utilizing automated active seismic source and sensor arrays to monitor a reactivated fault within the Opalinus clay formation at the Mont Terri Rock Laboratory (Switzerland), an analog caprock for geologic carbon storage. A series of six brine injections were conducted into the so‐called Main Fault to reactivate it. Seismic instrumentation in five monitoring boreholes on either side of the fault was used to continuously probe changes in P‐wave travel‐times associated with fault displacement and leakage. We performed time‐lapse travel‐time tomography on five hundred sequential data sets; this revealed a zone of decreased P‐wave velocity, up to 16 m/s, during each injection cycle, followed by a velocity increase during shut‐in. These results demonstrate varying elastic property perturbations, both spatially and temporally, along the fault plane during reactivation. We then interpreted these velocity changes in terms of fault dilation induced by pressurized fluids along the fault.

58 GEOSCIENCES↗
NASA NTRS2013

Suzaku View of the Swift/BAT Active Galactic Nuclei. V. Torus Structure of Two Luminous Radio-Loud Active Galactic Nuclei (3C 206 and PKS 0707-35)

We present the results from broadband X-ray spectral analysis of 3C 206 and PKS 0707−35 with Suzaku and Swift/BAT, two of the most luminous unobscured and obscured radio-loud active galactic nuclei (AGNs) with hard X-ray luminosities of 10(sup 45.5) erg per second and 10(sup 44.9) erg per second (14-195 keV), respectively. Based on the radio core luminosity, we estimate that the X-ray spectrum of 3C 206 contains a significant (∼60% in the 14-195 keV band) contribution from the jet, while it is negligible in PKS 0707−35.We can successfully model the spectra with the jet component (for 3C 206), the transmitted emission, and two reflection components from the torus and the accretion disk. The reflection strengths from the torus are found to be R(sub torus)(≡Omega/2pi) = 0.29 +/- 0.18 and 0.41 +/- 0.18 for 3C 206 and PKS 0707−35, respectively, which are smaller than those in typical Seyfert galaxies. Utilizing the torus model by Ikeda et al., we quantify the relation between the half-opening angle of a torus (theta(sub oa)) and the equivalent width of an iron-K line. The observed equivalent width of 3C 206, less than 71 eV, constrains the column density in the equatorial plane to N(sup eq)(sub H) lesst han 10(sup 23) per square centimeter, or the half-opening angle to theta(sub oa) greater than 80 deg. if N(sup eq)(sub H) = 10(sup 24) per square centimeter is assumed. That of PKS 0707−35, 72 +/- 36 eV, is consistent with N(sup eq)(sub H) ∼ 10(sup 23) per square centimeter. Our results suggest that the tori in luminous radio-loud AGNs are only poorly developed. The trend is similar to that seen in radio-quiet AGNs, implying that the torus structure is not different between AGNs with jets and without jets.

Suzaku↗
NASA NTRS2022

Low-Speed Performance Enhancement Using Localized Active Flow Control: Localized Active Flow Control Simulations on a Reference Aircraft (2/4)

A study of the potential implementations of localized active flow control (AFC) technology onto future airplanes is presented. This collaborative investigation addresses key objectives of the NASA Advanced Air Transport Technology (AATT) Project, in terms of reduction in fuel consumption and lower emission. It specifically targets the goals set forth in a roadmap developed by the NASA/Boeing team. The roadmap is a result of a series of meetings held between the two parties over the years and it represents a shared vision for practical implementations, leading up to flight demonstrations of localized flow control. If successful, localized flow control may lead to important ramifications for next generation airplanes from both the economic and environmental perspectives. Under this contract localized AFC has been used to improve aerodynamic performance during high-lift operations using Computational Fluid Dynamics (CFD). Specifically, AFC has been applied at the aileron and at various location in the wing leading edge (LE) regions. The applications target reduced drag and enhanced lift over the range of practical angles of attack, including stall. These benefits translate to airplane performance improvements, such as longer range or larger payload. The CFD results are used to quantify potential aerodynamic benefits, as well as the input required for actuation. This helps identify the most promising candidates, which potentially provide material net airplane level enhancements using onboard fluidic sources. The airplane configuration selected for the CFD study is a representative of a future short/medium-range twin-engine airplane dubbed the Reference Aircraft. A slew of AFC applications has been explored and their aerodynamic performance enhancements were benchmarked against the baseline Reference Aircraft. Promising AFC candidates have been deemed practical and potentially suitable for both the aileron and the wing LE implementations. The findings on the Reference Aircraft are used to guide the development of the AFC-enhanced aileron for the CRM-HL. The wind-tunnel model of the CRM-HL will be used by NASA to validate the AFC concepts, complementing the CFD-based analysis and the integration study (final report document #3).

CFD↗
DOE OSTI2021

The environmental dependence of the stellar mass of active galactic nucleus host galaxies and dependence of the clustering properties of active galactic nucleus host galaxies on the stellar mass

Abstract We used two volume‐limited active galactic nucleus (AGN) host galaxy samples constructed by Deng & Wen (2020, RMxAA , 56, 87), and explored the environmental dependence of the stellar mass of AGN host galaxies. In the luminous volume‐limited AGN host galaxy sample, the stellar mass of AGN host galaxies apparently depends on local environments: high mass AGN host galaxies exist preferentially in the dense regions of the universe, while low mass AGN host galaxies are located preferentially in low density regions. But in the faint volume‐limited AGN host galaxy sample, this dependence is fairly weak. We also examined the dependence of the clustering properties of AGN host galaxies on the stellar mass by cluster analysis, and found that in the luminous volume‐limited AGN host galaxy sample, low mass AGN host galaxies preferentially form isolated galaxies, close pairs, and small groups, while high mass AGN host galaxies preferentially inhabit the dense groups and clusters. A substantial dependence of the clustering properties of AGN host galaxies on the stellar mass is also observed in the faint volume‐limited AGN host galaxy sample, which is inconsistent with the environmental dependence of the stellar mass of AGN host galaxies in the faint volume‐limited AGN host galaxy sample. This is likely due to the galaxy number of the faint volume‐limited AGN host galaxy sample being too small to ensure an ideal statistical analysis.

Deng, Xin‐Fa↗
DOE OSTI2017

In vivo synergistic activity of a CAZyme cassette from Acidothermus cellulolyticus significantly improves the cellulolytic activity of the C. bescii exoproteome

The use of microbial cells to convert plant biomass directly to fuels and chemicals is referred to as consolidated bioprocessing (CBP). Members of the bacterial genus, Caldicellulosiruptor (Gram-positive, anaerobic hyperthermophiles) are capable of deconstructing plant biomass without enzymatic or chemical pretreatment. This is accomplished by the production and secretion of free, multi-domain enzymes that outperform commercial enzyme cocktails on some substrates. Here, we show that the exoproteome of C. bescii may be enhanced by the heterologous expression of enzymes from Acidothermus cellulolyticus that act synergistically to improve sugar release from complex substrates; as well as improve cell growth. In this work, co-expression of the A. cellulolyticus Acel_0615 ..beta..-glucanase (GH6 and GH12) and E1 endoglucanase (GH5) enzymes resulted in an increase in the activity of the exoproteome on Avicel; as well as an increase in growth of C. bescii on Avicel compared to the parental strain or the strain expressing the ..beta..-glucanase alone. As a result, our ability to engineer the composition and effectiveness of the exoproteome of these bacteria provides insight into the natural mechanism of plant cell wall deconstruction, as well as future directions for improving CBP.

09 BIOMASS FUELS↗
DOE OSTI2016

Measurement of jet activity in top quark events using the eμ final state with two b-tagged jets in pp collisions at $\sqrt{s}=8 $ TeV with the ATLAS detector

Measurements of the jet activity in tt¯ events produced in proton-proton collisions at √s=8 TeV are presented, using 20.3 fb –1 of data collected by the ATLAS experiment at the Large Hadron Collider. The events were selected in the dilepton eμ decay channel with two identified b-jets. The numbers of additional jets for various jet transverse momentum (p T ) thresholds, and the normalised differential cross-sections as a function of p T for the five highest-p T additional jets, were measured in the jet pseudo-rapidity range |η| < 4.5. The gap fraction, the fraction of events which do not contain an additional jet in a central rapidity region, was measured for several rapidity intervals as a function of the minimum p T of a single jet or the scalar sum of p T of all additional jets. These fractions were also measured in different intervals of the invariant mass of the eμbb¯ system. All measurements were corrected for detector effects, and found to be mostly well-described by predictions from next-to-leading-order and leading-order tt¯ event generators with appropriate parameter choices. Lastly, the results can be used to further optimise the parameters used in such generators.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗