Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “abstract data types”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Structural insights into the thermal decomposition sequence of barium tetrahydrogenorthotellurate(VI), Ba[H{sub 4}TeO{sub 6}]

The compounds Ba[H{sub 4}TeO{sub 6}] (I), Ba[H{sub 2}TeO{sub 5}] (II), Ba[Te{sub 2}O{sub 6}(OH){sub 2}] (III) and Ba[TeO{sub 4}] (IV) were prepared by application of a diffusion method (I), under hydrothermal conditions (II and III) and from solid state reactions (IV), respectively. Structure analysis on the basis of single crystal X-ray diffraction data revealed novel structure types for (I), (II) and (III) and isotypism of (IV) with PrSbO{sub 4} and LaSbO{sub 4}. Common feature of the four oxotellurate(VI) structures are [TeO{sub 6}] octahedra. Whereas in the crystal structure of (I) the octahedral units are isolated, they are condensed into chains via corner-sharing in (II) and via edge-sharing in (III) and (IV). The coordination numbers of the barium cations in the four structures range from seven to ten. Although hydrogen atom positions could not be located for the structures of (I) and (II), short interpolyhedral O···O contacts are evident for strong hydrogen bonding. The temperature behaviour of (I), (II) and (IV) was monitored by simultaneous thermal analysis (STA) measurements and in situ powder X-ray diffraction, revealing the decomposition sequence Ba[H{sub 4}TeO{sub 6}] → Ba[H{sub 2}TeO{sub 5}] → Ba[TeO{sub 4}]→ Ba[TeO{sub 3}] upon heating to temperatures up to 900 °C. - Graphical abstract: The crystal structures of the four oxotellurates(VI) were determined from single crystal data. The thermal decomposition of Ba[H{sub 4}TeO{sub 6}], monitored by temperature-dependent X-ray powder diffraction and simultaneous thermal analysis measurements, involves two condensation reactions according to Ba[H{sub 4}TeO{sub 6}]→Ba[H{sub 2}TeO{sub 5}]+H{sub 2}O(↑)→Ba[TeO{sub 4}]+ H{sub 2}O(↑). Display Omitted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Review of Global Precipitation Data Sets: Data Sources, Estimation, and Intercomparisons

Abstract In this paper, we present a comprehensive review of the data sources and estimation methods of 30 currently available global precipitation data sets, including gauge‐based, satellite‐related, and reanalysis data sets. We analyzed the discrepancies between the data sets from daily to annual timescales and found large differences in both the magnitude and the variability of precipitation estimates. The magnitude of annual precipitation estimates over global land deviated by as much as 300 mm/yr among the products. Reanalysis data sets had a larger degree of variability than the other types of data sets. The degree of variability in precipitation estimates also varied by region. Large differences in annual and seasonal estimates were found in tropical oceans, complex mountain areas, northern Africa, and some high‐latitude regions. Overall, the variability associated with extreme precipitation estimates was slightly greater at lower latitudes than at higher latitudes. The reliability of precipitation data sets is mainly limited by the number and spatial coverage of surface stations, the satellite algorithms, and the data assimilation models. The inconsistencies described limit the capability of the products for climate monitoring, attribution, and model validation.

54 ENVIRONMENTAL SCIENCES↗

The small GTPase Rab5 homologue Ypt5 regulates cell morphology, sexual development, ion-stress response and vacuolar formation in fission yeast

Highlights: •Multiple functions of Rab5 GTPase in fission yeast were found. •Roles of Rab5 in fission yeast were discussed. •Relation between Rab5 and actin cytoskeleton were discussed. -- Abstract: Inner-membrane transport is critical to cell function. Rab family GTPases play an important role in vesicle transport. In mammalian cells, Rab5 is reported to be involved in the regulation of endosome formation, phagocytosis and chromosome alignment. Here, we examined the role of the fission yeast Rab5 homologue Ypt5 using a point mutant allele. Mutant cells displayed abnormal cell morphology, mating, sporulation, endocytosis, vacuole fusion and responses to ion stress. Our data strongly suggest that fission yeast Rab5 is involved in the regulation of various types of cellular functions.

60 APPLIED LIFE SCIENCES↗

Analysis of energy recovery potential using innovative technologies of waste gasification

Highlights: Black-Right-Pointing-Pointer Energy recovery from waste by gasification was simulated. Black-Right-Pointing-Pointer Two processes: high temperature gasification and gasification associated to plasma. Black-Right-Pointing-Pointer Two types of feeding waste: Refuse Derived Fuel (RDF) and pulper residues. Black-Right-Pointing-Pointer Different configurations for the energy cycles were considered. Black-Right-Pointing-Pointer Comparison with performances from conventional Waste-to-Energy process. - Abstract: In this paper, two alternative thermo-chemical processes for waste treatment were analysed: high temperature gasification and gasification associated to plasma process. The two processes were analysed from the thermodynamic point of view, trying to reconstruct two simplified models, using appropriate simulation tools and some support data from existing/planned plants, able to predict the energy recovery performances by process application. In order to carry out a comparative analysis, the same waste stream input was considered as input to the two models and the generated results were compared. The performances were compared with those that can be obtained from conventional combustion with energy recovery process by means of steam turbine cycle. Results are reported in terms of energy recovery performance indicators as overall energy efficiency, specific energy production per unit of mass of entering waste, primary energy source savings, specific carbon dioxide production.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Cuticle development and the underlying transcriptome–metabolome associations during early seedling establishment

Abstract The plant cuticle is a complex extracellular lipid barrier that has multiple protective functions. This study investigated cuticle deposition by integrating metabolomics and transcriptomics data gathered from six different maize seedling organs of four genotypes, the inbred lines B73 and Mo17, and their reciprocal hybrids. These datasets captured the developmental transition of the seedling from heterotrophic skotomorphogenic growth to autotrophic photomorphogenic growth, a transition that is highly vulnerable to environmental stresses. Statistical interrogation of these data revealed that the predominant determinant of cuticle composition is seedling organ type, whereas the seedling genotype has a smaller effect on this phenotype. Gene-to-metabolite associations assessed by integrated statistical analyses identified three gene networks associated with the deposition of different elements of the cuticle: cuticular waxes; monomers of lipidized cell wall biopolymers, including cutin and suberin; and both of these elements. These gene networks reveal three metabolic programs that appear to support cuticle deposition, including processes of chloroplast biogenesis, lipid metabolism, and molecular regulation (e.g. transcription factors, post-translational regulators, and phytohormones). This study demonstrates the wider physiological metabolic context that can determine cuticle deposition and lays the groundwork for new targets for modulating the properties of this protective barrier.

Plant Sciences↗

A striking relationship between dust extinction and radio detection in DESI QSOs: evidence for a dusty blow-out phase in red QSOs

ABSTRACT We present the first eight months of data from our secondary target programme within the ongoing Dark Energy Spectroscopic Instrument (DESI) survey. Our programme uses a mid-infrared and optical colour selection to preferentially target dust-reddened quasi-stellar objects (QSOs) that would have otherwise been missed by the nominal DESI QSO selection. So far, we have obtained optical spectra for 3038 candidates, of which ∼70 per cent of the high-quality objects (those with robust redshifts) are visually confirmed to be Type 1 QSOs, consistent with the expected fraction from the main DESI QSO survey. By fitting a dust-reddened blue QSO composite to the QSO spectra, we find they are well-fitted by a normal QSO with up to AV ∼ 4 mag of line-of-sight dust extinction. Utilizing radio data from the LOFAR Two-metre Sky Survey (LoTSS) DR2, we identify a striking positive relationship between the amount of line-of-sight dust extinction towards a QSO and the radio detection fraction, that is not driven by radio-loud systems, redshift and/or luminosity effects. This demonstrates an intrinsic connection between dust reddening and the production of radio emission in QSOs, whereby the radio emission is most likely due to low-powered jets or winds/outflows causing shocks in a dusty environment. On the basis of this evidence, we suggest that red QSOs may represent a transitional ‘blow-out’ phase in the evolution of QSOs, where winds and outflows evacuate the dust and gas to reveal an unobscured blue QSO.

79 ASTRONOMY AND ASTROPHYSICS↗

Melting rate correlation with batch properties and melter operating conditions during conversion of nuclear waste melter feeds to glasses

The rate of conversion of nuclear waste melter feed to glass is affected by the selection of melter feed materials and by melter design and operation. The melting rate correlation (MRC) is an equation that relates the glass production rate with two types of variables: (1) feed and melt properties: conversion heat, cold-cap bottom temperature, and glass melt viscosity; and (2) melter design and operation parameters: melter geometry, melter operating temperature, and gas bubbling rate. The MRC shows good agreement for an extended melting-rate data set of high-level waste (HLW) melter feeds and a data set generated for low-activity waste (LAW) melter feeds. Laboratory observation of heated melter feed samples is often used to assess the cold-cap bottom temperature of HLW melter feeds (moderately foaming feeds), but this technique appears inadequate for LAW melter feeds (vigorously foaming feeds). For LAW feeds, an adequate assessment of the cold-cap bottom temperature was achieved using evolved gas analysis, which allows identification of the collapse of primary foam for oxidized feeds. This assessment shows that the cold-cap bottom temperature for vigorously foaming LAW feeds is higher than that for moderately foaming HLW feeds. When the results of MRC are compared, LAW feeds are generally less sensitive to the bubbling rate and melt viscosity, and more sensitive to the cold-cap bottom temperature than HLW feeds. The MRC qualifies as a promising tool to support the selection of melter feed materials and melter operating conditions, which is determined from expensive independent scaled melter experiments, and sophisticated mathematical models.

Lee, Seung Min↗

New three-dimensional inorganic frameworks based on the uranophane-type sheet in monoamine templated uranyl-vanadates

Seven new uranyl vanadates with mono-protonated amine or tetramethylammonium used as structure directing cations, (C{sub 2}NH{sub 8}){sub 2{l_brace}}[(UO{sub 2})(H{sub 2}O)][(UO{sub 2})(VO{sub 4})]{sub 4{r_brace}}.H{sub 2}O (DMetU5V4) (C{sub 2}NH{sub 8}){l_brace}[(UO{sub 2})(H{sub 2}O){sub 2}][(UO{sub 2})(VO{sub 4})]{sub 3{r_brace}}.H{sub 2}O (DMetU4V3), (C{sub 5}NH{sub 6}){sub 2{l_brace}}[(UO{sub 2})(H{sub 2}O)][(UO{sub 2})(VO{sub 4})]{sub 4{r_brace}}.H{sub 2}O (PyrU5V4), (C{sub 3}NH{sub 10}){l_brace}[(UO{sub 2})(H{sub 2}O){sub 2}][(UO{sub 2})(VO{sub 4})]{sub 3{r_brace}}.H{sub 2}O (isoPrU4V3), (N(CH{sub 3}){sub 4}){l_brace}[(UO{sub 2})(H{sub 2}O){sub 2}][(UO{sub 2})(VO{sub 4})]{sub 3{r_brace}}.H{sub 2}O (TMetU4V3), (C{sub 6}NH{sub 14}){l_brace}[(UO{sub 2})(H{sub 2}O){sub 2}][(UO{sub 2})(VO{sub 4})]{sub 3{r_brace}}.H{sub 2}O (CHexU4V3), and (C{sub 4}NH{sub 12}){l_brace}[(UO{sub 2})(H{sub 2}O)][(UO{sub 2})(VO{sub 4})]{sub 3{r_brace}} (TButU4V3) were prepared from mild-hydrothermal reactions using dimethylamine, pyridine, isopropylamine, tetramethylammonium hydroxide, cyclohexylamine and tertiobutylamine, respectively, with uranyl nitrate and vanadium oxide in acidic medium. The structures were solved using single-crystal X-ray diffraction data. The compounds exhibit three-dimensional uranyl-vanadate inorganic frameworks built from uranophane-type uranyl-vanadate layers pillared by uranyl polyhedra with cavities in between occupied by protonated organic moieties. In the uranyl-vanadate layers the orientations of the vanadate tetrahedra give new geometrical isomers leading to unprecedented pillared systems and new inorganic frameworks with U/V=4/3. Crystallographic data: (DMetU5V4) orthorhombic, Cmc2{sub 1} space group, a=15.6276(4), b=14.1341(4), c=13.6040(4) A; (DMetU4V3) monoclinic, P2{sub 1}/n space group, a=10.2312(4), b=13.5661(7), c=17.5291(7) A, {beta}=96.966(2); (PyrU5V4), triclinic, P1 space group, a=9.6981(3), b=9.9966(2), c=10.5523(2) A, {alpha}=117.194(1), {beta}=113.551(1), {gamma}=92.216(1){sup o}; (isoPrU4V3) monoclinic, P2{sub 1}/n space group, a=10.3507(1), b=13.6500(2), c=17.3035(2) A, {beta}=97.551(1){sup o}; (TMetU4V3) orthorhombic, Pbca space group, a=17.1819(2), b=13.6931(1), c=21.4826(2) A; (CHexU4V3), triclinic P-1 space group, a=9.8273(6), b=11.0294(7), c=12.7506(8) A, {alpha}=98.461(3), {beta}=96.437(3), {gamma}=105.955(3){sup o}; (TButU4V3), monoclinic, P2{sub 1}/m space group, a=9.8048(4), b=17.4567(8), c=15.4820(6) A, {beta}=106.103(2). - Graphical abstract: The various type of PBP pillars P2, P3, P4, and P4' in the three-dimensional inorganic frameworks based on the uranophane-type sheet in monoamine templated uranyl-vanadates.

36 MATERIALS SCIENCE↗

Crystallographic and magnetic characterisation of the brownmillerite Sr{sub 2}Co{sub 2}O{sub 5}

Sr{sub 2}Co{sub 2}O{sub 5} with the perovskite-related brownmillerite structure has been synthesised via quenching, with the orthorhombic unit cell parameters a=5.4639(3) A, b=15.6486(8) A and c=5.5667(3) A based on refinement of neutron powder diffraction data collected at 4 K. Electron microscopy revealed L-R-L-R-intralayer ordering of chain orientations, which require a doubling of the unit cell along the c-parameter, consistent with the assignment of the space group Pcmb. However, on the length scale pertinent to NPD, no long-range order is observed and the disordered space group Imma appears more appropriate. The magnetic structure corresponds to G-type order with a moment of 3.00(4) {mu}{sub B} directed along [1 0 0]. -- Graphical abstract: Possible ordering of the tetrahedral chains in Sr{sub 2}Co{sub 2}O{sub 5}. Display Omitted Research highlights: {yields} Sr{sub 2}Co{sub 2}O{sub 5} has alternating (L and R) chains in a given tetrahedral layer. {yields} Order between layers is limited. {yields} NPD shows no evidence for the doubled unit cell-averaged structure. {yields} The length scale for a given technique is critical in considering space group.

36 MATERIALS SCIENCE↗

Structural features and enhanced high-temperature oxygen ion transport in SrFe{sub 1-x}Ta{sub x}O{sub 3-{delta}}

Structural features, oxygen non-stoichiometry and transport properties are studied in the oxide series SrFe{sub 1-x}Ta{sub x}O{sub 3-{delta}}, where x=0.2, 0.3 and 0.4. X-ray diffraction and electron microscopy data evidence formation of the inhomogeneous materials at x=0.3 and 0.4, which include phase constituents with a cubic perovskite and a double perovskite structure types. The composition, the amount and the typical grain size of the phase inhomogeneities are shown to depend both on doping and oxygen content. The increased oxygen-ion conductivity is observed in oxygen depleted materials, which is explained by the increase in the amount of cubic perovskite-like phase and development of interfacial pathways favorable for enhanced oxygen ion transport. - Graphical abstract: The structural studies, oxygen content and conductivity measurements suggest that oxygen depletion from the double perovskite phase constituent of SrFe{sub 1-x}Ta{sub x}O{sub 3-{delta}} for x>0.2 is accompanied by formation of pathways for fast ion transport. Black-Small-Square Highlights: Black-Right-Pointing-Pointer The double perovskite type regions are shown to exist in SrFe{sub 1-x}Ta{sub x}O{sub 3-{delta}}. Black-Right-Pointing-Pointer The oxygen depletion is accompanied with phase separation. Black-Right-Pointing-Pointer The phase separation favors formation of pathways for enhanced oxygen ion transport.

36 MATERIALS SCIENCE↗

High-pressure high-temperature crystal growth of equiatomic rare earth stannides RENiSn and REPdSn

The two series of equiatomic rare earth (RE) stannides RENiSn and REPdSn were systematically studied with respect to high-pressure modifications. The normal-pressure (NP) low-temperature (LT) modifications were synthesized by arc-melting and subsequently treated under high-pressure (P{sub max}=11.5 GPa) and high-temperature (T{sub max}=1570 K) conditions in a Walker-type multi-anvil press. The pressure and temperature conditions were systematically varied in order to improve the crystallization conditions. The new ZrNiAl-type high-pressure modifications HP-RENiSn (RE=Sc, Y, La, Gd–Lu) and HP-REPdSn (RE=Y, Sm–Dy) were obtained in 80 mg quantities, several of them in X-ray pure form. Some of the REPdSn stannides with the heavy rare earth elements show high-temperature (HT) modifications. The structures of HP-ScNiSn, HP-GdNiSn, HP-DyNiSn (both ZrNiAl-type), NP-YbNiSn, and HT-ErPdSn (both TiNiSi-type) were refined from single crystal diffractometer data, indicating full ordering of the transition metal and tin sites. TiNiSi-type NP-EuPdSn transforms to MgZn{sub 2}-type HP-EuPdSn: P6{sub 3}/mmc, a=588.5(2), c=917.0(3) pm, wR2=0.0769, 211 F{sup 2} values, 11 variables. The structure refinement indicated statistical occupancy of the palladium and tin sites on the tetrahedral network. The X-ray pure high-pressure phases were studied with respect to their magnetic properties. HP-YPdSn is a Pauli paramagnet. The susceptibility data of HP-TbNiSn, HP-DyNiSn, HP-GdPdSn, and HP-TbPdSn show experimental magnetic moments close to the free ion values of RE{sup 3+} and antiferromagnetic ordering at low temperature with the highest Néel temperature of 15.8 K for HP-TbPdSn. HP-SmPdSn shows the typical Van Vleck type behavior along with antiferromagnetic ordering at T{sub N}=5.1 K. HP-EuPdSn shows divalent europium and antiferromagnetic ordering at 8.9 K followed by a spin reorientation at 5.7 K. - Graphical abstract: Packing of the polyhedra in the high-pressure phase of EuPdSn. - Highlights: • High-pressure phases of the stannides RENiSn and REPdSn. • Crystal growth conditions. • Pressure- and temperature-driven phase transitions. • Magnetic properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fusion of Multiple Models for Improving Gross Primary Production Estimation With Eddy Covariance Data Based on Machine Learning

Abstract Terrestrial gross primary production (GPP) represents the magnitude of CO 2 uptake through vegetation photosynthesis, and is a key variable for carbon cycles between the biosphere and atmosphere. Light use efficiency (LUE) models have been widely used to estimate GPP for its physiological mechanisms and availability of data acquisition and implementation, yet each individual GPP model has exhibited large uncertainties due to input errors and model structure, and further studies of systematic validation, comparison, and fusion of those models with eddy covariance (EC) site data across diverse ecosystem types are still needed in order to further improve GPP estimation. We here compared and fused five GPP models (VPM, EC‐LUE, GOL‐PEM, CHJ, and C‐Fix) across eight ecosystems based on FLUXNET2015 data set using the ensemble methods of Bayesian Model Averaging (BMA), Support Vector Machine (SVM), and Random Forest (RF) separately. Our results showed that for individual models, EC‐LUE gave a better performance to capture interannual variability of GPP than other models, followed by VPM and GLO‐PEM, while CHJ and C‐Fix were more limited in their estimation performance. We found RF and SVM were superior to BMA on merging individual models at various plant functional types (PFTs) and at the scale of individual sites. On the basis of individual models, the fusion methods of BMA, SVM, and RF were examined by a five‐fold cross validation for each ecosystem type, and each method successfully improved the average accuracy of estimation by 8%, 18%, and 19%, respectively.

Environmental Sciences & Ecology↗

Down-selection of biomolecules to assemble “reverse micelle” with perovskites

Abstract Biological molecule-semiconductor interfacing has triggered numerous opportunities in applied physics such as bio-assisted data storage and computation, brain-computer interface, and advanced distributed bio-sensing. The introduction of electronics into biological embodiment is being quickly developed as it has great potential in providing adaptivity and improving functionality. Reciprocally, introducing biomaterials into semiconductors to manifest bio-mimetic functionality is impactful in triggering new enhanced mechanisms. In this study, we utilize the vulnerable perovskite semiconductors as a platform to understand if certain types of biomolecules can regulate the lattice and endow a unique mechanism for stabilizing the metastable perovskite lattice. Three tiers of biomolecules have been systematically tested and the results reveal a fundamental mechanism for the formation of a “reverse-micelle” structure. Systematic exploration of a large set of biomolecules led to the discovery of guiding principle for down-selection of biomolecules which extends the classic emulsion theory to this hybrid systems. Results demonstrate that by introducing biomaterials into semiconductors, natural phenomena typically observed in biological systems can also be incorporated into semiconducting crystals, providing a new perspective to engineer existing synthetic materials.

59 BASIC BIOLOGICAL SCIENCES↗

A revised SALT2 surface for fitting Type Ia supernova light curves

ABSTRACT We present a revised Spectral Adaptive Light Curve Template (SALT2) surface (SALT2-2021) for fitting the light curves of Type Ia supernovae (SNe Ia), which incorporates new measurements of zero-point calibration offsets and Milky Way extinction. The most notable change in the new surface occurs in the UV region. This new surface alters the distance measurements of SNe Ia, which can be used to investigate the nature of dark energy by probing the expansion history of the Universe. Using the revised SALT2 surface on public data from the first 3 yr of the Dark Energy Survey Supernova Program (combined with an external low-z SNe Ia sample) and combining with cosmic microwave background constraints, we find a change in the dark energy equation-of-state parameter, Δw = 0.015 ± 0.004. This result highlights the continued importance of controlling and reducing systematic uncertainties, particularly with the next generation of supernova analyses aiming to improve constraints on dark energy properties.

79 ASTRONOMY AND ASTROPHYSICS↗

Preparation of fluorescent carbon dots and their interaction with human-transferrin (hTf)

Highlights: • Glycine–modified Carbon dots (G-CDs) with high fluorescent quantum yield (QY = 31%) were prepared by microwave-assisted method. • G-CDs were stability at biological system, and had low cytotoxicity. • Human transferrin (hTf) had one type of binding site with G-CDs, and the fluorescence quenching mode was static quenching process. - Abstract: Luminescent carbon dots (CDs) are new fluorescent materials and widely used in biomedical fields. In this paper, CDs were prepared using citric acid and glycine (denoted G-CDs) by one-step microwave-assisted method and characterized by transmission electron microscopy (TEM), power X-ray diffraction (XRD), nuclear magnetic resonance ({sup 13}CNMR), and Fourier transform infrared (FT-IR). The results showed that glycine was better than PEG200 or hexadecyltrimethyl ammonium bromide (CTAB) as the modification in reaction. The prepared G-CDs had the sizes about 10 nm, high fluorescent quantum yield (QY) up to 31%, and stability at biological system. Moreover, G-CDs had low cytotoxicity. Our results verified that amino group (or secondary amines) had a significant effect on the QY; one-step microwave-assisted method was simple, efficient and green. The further experiments about the interaction of G-CDs with human transferrin (hTf) were also detected. Data showed that there was a strong interaction between G-CDs and hTf, and one type of binding site between them. The quenching mode of fluorescence of hTf with G-CDs was static quenching process.

36 MATERIALS SCIENCE↗

Synthesis and crystal structure of CuZrTiO{sub 5}-A new crystal structure type

A new compound, CuZrTiO{sub 5}, was synthesized as strongly pleochroic green crystals from the oxides between 995 and 1010 deg. C, 1 atm. Its crystal structure was determined by single crystal XRD, resulting in R (F{sup 2}>2sigma(F{sup 2}))=0.032 and wR (all data)=0.079). CuZrTiO{sub 5} is orthorhombic, space group P2{sub 1}2{sub 1}2{sub 1}, a=3.5871(3) A, b=6.6968(4) A, c=14.6679(9) A, V=352.35(4) A{sup 3}, Z=4. The structure is topologically similar to In{sub 2}TiO{sub 5} but differs in space group and cation coordination. CuZrTiO{sub 5} has relatively regular TiO{sub 6} polyhedra, but coordination is 7+1 for Zr, and 4+2 for Cu due to the Jahn-Teller effect. Ordering of the long Cu-O bonds causes reduction in symmetry relative to In{sub 2}TiO{sub 5}. Layers of Cu alternate with Ti+Zr on (001), giving rise to a distinct cleavage. Bond valence sums on Ti and Zr are far from ideal, which appears due to the limited ability of this structural topology to avoid close next-nearest neighbour distances. - Graphical abstract: The new compound CuZrTiO{sub 5} is orthorhombic (P2{sub 1}2{sub 1}2{sub 1}), with a=3.5871(3) A, b=6.6968(4) A, c=14.6679(9) A. The structure, determined with single crystal XRD, represents a new crystal structure type that is a slight distortion of that of In{sub 2}TiO{sub 5} but differs in space group and cation coordination.

36 MATERIALS SCIENCE↗

Integration of microseismic monitoring data into coupled flow and geomechanical models with ensemble Kalman filter

Abstract Hydraulic stimulation of low‐permeability rocks in enhanced geothermal systems, shale resources, and CO 2 storage aquifers can trigger microseismic events, also known as microearthquakes (MEQs). The distribution of microseismic source locations in the reservoir may reveal important information about the distribution of hydraulic and geomechanical rock properties. In this paper, we present a framework for conditioning heterogeneous rock permeability and geomechanical property distributions on microseismic data. To simulate the multiphysics processes in these systems, we combine a fully coupled flow and geomechanical model with the Mohr‐Coulomb type rock failure criterion. The resulting multiphysics simulation constitutes the forecast model that relates microseismic source locations to reservoir rock properties. We adopt this forward model in an ensemble Kalman filter (EnKF) data assimilation framework to jointly estimate reservoir permeability and geomechanical property distributions from injection‐induced microseismic response measurements. We show that integration of a large number of spatially correlated microseismic data with practical ensemble sizes can lead to severe underestimation of ensemble spread, and eventually ensemble collapse. To mitigate the variance underestimation issue, two low‐rank data representation schemes are presented and discussed. In the first approach, microseismic data are projected onto a low‐dimensional subspace defined by the left singular vectors of the perturbed observation matrix. The second method uses a coarser grid for representing the microseismic data. A series of numerical experiments is presented to evaluate the performance of the proposed methods and to illustrate their applicability for assimilating microseismic data into coupled flow and geomechanical forward models to estimate multiphysics rock properties.

Tarrahi, Mohammadali↗