Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Xe”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Uncertainty analysis for VERA problem 2 using the cell-code Condor v2.8.05

Condor is a cell-level neutronic calculation code that applies multi-group collision probabilities with heterogeneous response coupling method within generic geometry configurations. Under the Condor's code continuous development, the incorporation of up-to-date methodologies and state-of-the-art practices in reactor analysis represents a driving force. In this work, the capabilities of Condor v2.8.05 to develop an uncertainty analysis for realistic PWR-kind fuel assemblies are studied. The Total Monte Carlo approach is applied to quantify the impact of fabrication tolerances in the code's results for reactivity and power distributions, by means of randomly sampled input values using the VERA problem 2 as basis. The VERA problem 2 proposes a series of Westinghouse 2D 17 x 17-type fuel lattices, to be calculated reflected at beginning-of-life without Xe. The configurations correspond to a modern PWR. Selected neutronic parameters from Condor runs are thus analyzed in terms of the observed spread as well as the obtained distributions for the randomly perturbed cases, showing the capability of the code to handle the required input data, as well as its ability to provide valuable insights regarding uncertainty quantification.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2022

Cross-polarized common-path temporal interferometry for high-sensitivity strong-field ionization measurements

Absolute density measurements of low-ionization-degree or low-density plasmas ionized by lasers are very important for understanding strong-field physics, atmospheric propagation of intense laser pulses, Lidar etc. A cross-polarized common-path temporal interferometer using balanced detection was developed for measuring plasma density with a sensitivity of ∼0.6 mrad, equivalent to a plasma density-length product of ∼2.6 × 10 13 cm −2 if using an 800 nm probe laser. By using this interferometer, we have investigated strong-field ionization yield versus intensity for various noble gases (Ar, Kr, and Xe) using 800 nm, 55 fs laser pulses with both linear (LP) and circular (CP) polarization. The experimental results were compared to the theoretical models of Ammosov-Delone-Krainov (ADK) and Perelomov-Popov-Terent’ev (PPT). We find that the measured phase change induced by plasma formation can be explained by the ADK theory in the adiabatic tunneling ionization regime, while PPT model can be applied to all different regimes. We have also measured the photoionization and fractional photodissociation of molecular (MO) hydrogen. By comparing our experimental results with PPT and MO-PPT models, we have determined the likely ionization pathways when using three different pump laser wavelengths of 800 nm, 400 nm, and 267 nm.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

Constraining Bedrock Groundwater Residence Times in a Mountain System with Environmental Tracer Observations and Bayesian Uncertainty Quantification: Modeling and Data Package

Groundwater residence times provide fundamental descriptions of hydrologic dynamics and mixing processes in mountainous watersheds. Yet, few observational datasets that can constrain groundwater residence times over broad timescales are available in high elevation mountain systems. Here we present field observations from May 2021 of dissolved noble gases (He, Ne, Ar, Kr, and Xe), Chloroflourcarbons (CFCs), Sulfurhexaflouride (SF6), and tritium (3H) sampled from the Pumphouse Lower Montane study site (wells PLM1, PLM6, and PLM7) within the East River Watershed, Colorado. The presented noble gas (PLM_noblegas_2021.csv) and environmental tracer (PLM_tracers_2021.csv) observation datasets, along with the associated modeling scripts, aide in quantifying groundwater residence times and recharge conditions in a high elevation mountain system. Furthermore, the modeling scripts quantify groundwater residence time and noble gas recharge condition uncertainties using a novel Markov-chain Monte Carlo approach. All data modeling scripts are written in the Python code.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Modeling Molten Salt Reactor Fission Product Removal with SCALE

Liquid-fuel Molten Salt Reactors (MSRs) allow for continuous online fuel treatment and processing using a variety of subsystems. Among these subsystems, the off-gas system (OGS) continuously removes fission products from the primary fuel salt through a helium sparging process. Accurately modeling fission product behavior is paramount for the development of MSRs; while there are a variety of depletion modeling and simulation tools that allow for removal of material from a defined system, most of them work in a semicontinuous, batch-wise manner. The new tools implemented into TRITON, in the SCALE suite for reactor analysis and design, aim to address this issue by implementing truly continuous material feeds and removals. In addition, material accountancy is enhanced in these tools, which enable tracking of removed material in user-specified mixtures. These continuous depletion tools provide a way to model material transport throughout systems more efficiently and accurately. This report validates the new SCALE MSR modeling capabilities using data from the Molten Salt Reactor Experiment (MSRE). After a framework was established for deriving realistic removal rates based on design specifications, these rates were used by TRITON to continuously remove specific elements while performing burnup calculations. Results were compared to those obtained in MSRE, with a focus on the 135 Xe poison fraction. After these capabilities were validated, the learned concepts and best practices were applied to model the Molten Salt Breeder Reactor (MSBR) and the Molten Salt Demonstration Reactor (MSDR) to study the effects of continuous fission product removal in fuel salt reactivity, as well as the lifetime effects.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2020

Fission Gas Monitoring System Efficiency Calibration Summary Report

The Fission Gas Monitoring System was designed to work in conjunction with the Fuel Accident Condition Simulator Furnace and is used to measure fission gas releases during post-irradiation fuel heating tests. A high-purity helium sweep gas is swept past the heated fuel sample in the furnace and routed to a fission gas monitoring system, which cryrogenically traps the krypton (Kr) and xenon (Xe) fission gases. As the radioactive species of the trapped gas decays, high-purity germanium detectors monitor the amount of fission gas in each trap. The primary fission product present in this test is 85Kr, which has a 10.76-year half-life. The presence of 85Kr indicates particle defects and iodine release. There is also the potential for re-irradiating the fuel compacts in the Neutron Radiography Reactor in the Hot Fuel Examination Facility basement. With re-irradiation, it is possible to have xenon fission gas present, specifically 133Xe, which has a 5.243-day half-life. Re-irradiation also produces 131I, which is important for design-basis accidents and regulatory licensing.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

Key Nuclear Data Impacting Reactivity in Advanced Reactors

Advanced reactor concepts currently being developed throughout the industry are significantly different from light water reactor (LWR) designs with respect to geometry, materials, and operating conditions, and consequently, with respect to their reactor physics behavior. Given the limited operating experience with non-LWRs, the accurate simulation of reactor physics and the quantification of associated uncertainties are critical for ensuring that advanced reactor concepts operate within the appropriate safety margins. Nuclear data are a major source of input uncertainties in reactor physics analysis. As part of an ongoing project at Oak Ridge National Laboratory (ORNL), the effects of nuclear data uncertainties on key figures of merit associated with advanced reactor safety are being assessed for selected advanced reactor technologies. Key nuclear data relevant for reactor safety analysis for each selected advanced reactor technology were identified, and their impact on important key figures of merit was assessed. Available advanced reactor specifications were reviewed, results from studies performed at ORNL and other research institutions were consulted, and available evaluated nuclear data libraries were analyzed. This report summarizes the key nuclear data for nuclides in the fuel, as well as other significant data, including scattering and neutron capture in various materials for the moderator, coolant, and structure of the considered advanced reactors. For the considered advanced reactors that use low-enriched uranium (LEU) fuel, results from LWR studies provided insight into relevant nuclear data given the lack of available studies specifically addressing these new systems. The major nominal missing data that were identified consist of thermal scattering data and 135m Xe cross section data for molten salt reactor (MSR) analysis. The identified major gaps with respect to nuclear data uncertainties are missing uncertainties of thermal scattering data for high temperature gas-cooled reactors and moderated MSR systems, and incomplete uncertainties on angular distributions in particular for fast spectrum systems, such as sodiumcooled fast reactors, fast molten salt reactors, and heat pipe reactors. Furthermore, it was found that special attention should be paid to cross section and uncertainty differences between different evaluated nuclear data library releases, because significant differences in nuclear data that can lead to major differences in reactivity calculations were found, even for well-known nuclides.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2020

Effect of Impurity Atoms on Thermonuclear Yield

The presence of impurity atoms in an inertial confinement fusion (ICF) implosion can greatly affect the burning of the thermonuclear fuel. This is a serious concern for attaining ignition as high atomic number atoms, such as carbon, can mix into the hot spot and reach the deuterium–tritium (DT) fuel, absorb energy from the implosion, and radiate away that energy. The temperature of the DT fuel drops and reduces the reactivity of the fuel resulting in lower thermonuclear yield. Fuel impurities can also be a useful diagnostic as when higher-Z atoms, such as Ar, Kr, and Xe, are purposefully mixed into the fuel. From the spectra emitted by these atoms, the temperature and density of the fuel can be deduced. The long history of using such tracer atoms by the national ICF program shows the great advances in experimental technique, diagnostic instruments, and atomic-physics modeling over the past 50 years. A particular set of experiments, the “High-Z” campaign, is reviewed in depth as this was the most systematic study of tracer element composition and quantity ever reported. Difficulties in interpreting the results of those experiments due to the limited code capabilities at that time are discussed. A main concern for the High-Z campaign was the then current state of non-Local Thermodynamic Equilibrium (nLTE) atomic physics models. The present state of nLTE modeling and its implementation in Los Alamos’s multi-physics codes is discussed in this report. To further the understanding of the complex interaction of high-Z atoms in the gas, a survey of relevant existing experimental platforms at the National Ignition Facility (NIF) and the Omega Laser Facility are presented along with the current state of pertinent diagnostics at NIF and Omega. This review concludes with a discussion of the trade-off available between temperature and volume of the imploded ICF capsule with the goal of maximizing the total yield.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

Fission Gas Measurements in Spent Fuel: Literature Review

The fission-derived noble gases, xenon(Xe) and krypton(Kr), have long been proposed as a tool for supporting nuclear safeguards and declarations verification. A vast body of literature outlines how these non-reactive fission gases released during reactor operation and shutdowns correlate to burnup level, power history, other reactor specifications and reprocessing activities. However, irradiation conditions can vary appreciably both radially and axially within a fuel pin.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2020

Chemical Modeling of the Capture of Radioiodine Species

Iodine is a common fission product resulting from the transmutation of uranium fuel in nuclear power reactors. The short-lived radioactive isotope, 131 I, with a half-life of around eight days, would be a particular health concern if released into the environment. Capture materials, such as activated carbon, are used routinely in nuclear power plants and medical isotope production facilities to remove this hazard during normal operations to reduce emissions to acceptable levels. Iodine, unlike other common fission products such as noble gases, is challenging because of the wide range of molecular forms and oxidation states (from +VII in IF 7 to -I in iodide) that it displays, which can interconvert both in the gas phase and in the solution phase for example. The work in this project is focused on three computational tasks. In the first, we consider the binding of iodine-containing molecules of varying oxidation states to the major component of activated carbon – pristine graphene-like sheets. The second task focused on molecular binding and possible chemical transformations resulting from the reaction of molecular iodine with chemical functional groups on the edge of the graphene sheets or surface defects in the sheet itself. The final task was associated with radiolytic breakdown of 131 I to 131 Xe in iodine containing molecules and investigated the resulting molecular fragmentation process both in the gas phase and on the graphene-like surface. For each of the tasks, the intent was to learn about the thermodynamics and kinetics of the chemical transformations and use the calculations to provide parameters for input into kinetic models describing these processes for interpretation of experimental data in future work.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2020

Enabling System Technologies to Improve the Economies and Performance of Existing LWRs and Advanced BWR Plants: Improving Offgas System Performance. Final CRADA Report

The project goal is to study adsorbent materials and adsorption conditions in order to develop recommendations to improve the current BWR off-gas treatment operations with respect to cost savings. ANL tasks included a literature survey on relevant information for the adsorption of radionuclides (e.g., Xe and Kr), including adsorption coefficients on various charcoals, the effect of radionuclide concentration and moisture, and alternative sorption materials; participate in meetings and teleconferences as needed; prepare reports and support efforts INL and other organization Team Members.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Higher Throughput, Lower Cost Processing of Flexible Perovskite Solar Cells by Photonic Curing

The objectives of this SETO project are to explore whether photonic curing can be used to perform annealing in perovskite solar cell (PSC) fabrication, and if so, whether it can enable high-throughput PSC manufacturing. The successful outcome of the project will reduce manufacturing cost towards realizing the SETO goal of the Levelized cost of electricity (LCOE) $0.03/kWh by 2030. The project is a collaboration between Hsu’s group at the University of Texas at Dallas (UTD) and NovaCentrix, an Austin TX based company that pioneered the PulseForge® photonic curing tools and has expertise in applying this technology to printed electronics. Thin-film synthesis typically involves a thermal annealing step to convert from precursors to final material phases, to obtain the desired crystalline phase, or to improve materials structural or electrical properties. However, thermal annealing typically requires high temperatures that are incompatible with inexpensive plastic substrates and annealing times lasting tens-to-hundreds of minutes, making it incompatible with roll-to-roll (R2R) manufacturing at a desirable web speed. Photonic curing uses a flash Xe lamp to deliver short (20 µs to 100 ms) but high intensity (up to 50 kW/cm 2 ) pulses of broadband light (200 – 1500 nm) to the sample. It has been successfully applied to sinter printed metal nanoparticle inks into conductive patterns. This project aimed to extend the applications of photonic curing to convert halide perovskite films and transparent metal oxide transport layers. Despite the interruption by COVID-19, we have achieved significant accomplishments to establish photonic curing as a viable technology for the high-throughput manufacturing of PSCs. (1) We demonstrated that photonic curing can convert both metal oxide transport layer and halide perovskite absorber in the PSCs and successfully made flexible PSCs on Corning Willow glass® (WG)/ indium tin oxide (ITO) substrates without any thermal annealing steps. These photonically cured devices achieve performance comparable to conventional thermally annealed devices but were fabricated with a total processing time reduced by six orders of magnitude. We also show that photonic curing can achieve desirable web speed (up to 26 m/min) and large-area uniformity. (2) By establishing photonic curing processing phase spaces for the perovskite, we show that the longer pulses are more forgiving in small variation in the photonic curing conditions, making it more suitable for R2R manufacturing. (3) Our results clearly illustrated the importance of improving mechanical and optical properties of transparent electrodes on flexible substrates. (4) We also performed fundamental studies that elucidate the interactions between perovskite absorber and metal oxide transport layer that can undermine the PSC stability. Five refereed journal papers in top journals (ACS Energy Letters, npj Flexible Electronics, ACS Applied Energy Materials, Materials Advances, and Frontiers in Energy Research), one conference proceeding (PVSC-47), six conference presentations (PVSC and Materials Research Society meetings), and a Ph.D. dissertation (Trey B. Daunis) were produced under this project. Energy Materials Corporation (EMC) has forecast that with a 1.5 m wide web moving at a web speed of 30 m/min, R2R processing of PSC could provide up to 4 GW/year for a single R2R assembly line. Replacing thermal annealing with photonic curing, as demonstrated by the accomplishments of this project, is necessary to realize such an energy production goal.

14 SOLAR ENERGY↗
DOE OSTI2021

Focused Ion Beam analysis of non radioactive samples [PowerPoint]

The presentation includes various images to illustrate the analysis. Helios G4 Plasma FIB: Xe ion columns mills material 30 times faster than Ga; Options include: Energy Dispersive Spectroscopy (EDS), Wavelength Dispersive spectroscopy (WDS) Electron backscattered Diffraction (EBSD), Time of Flight Sims (ToF SIMS), Inert gas/vacuum sample transfer system; Excels at micromachining and collecting 3D datasets using various detection systems.

42 ENGINEERING↗
DOE OSTI2020

Investigating bubble pressures in irradiated UO 2 for understanding fragmentation of high burnup structure

This report summarized work carried out to investigate mechanisms relevant to fragmentation of high burnup UO 2 fuel. High pressure bubbles that form in high burnup structure are thought to be responsible for fragmentation and pulverization, when exposed to a temperature ramp during a transient. The over-pressurization of the bubbles during normal operation is a pre-requisite for this mechanism to occur. Therefore, in this work we investigate the role of interstitials, produced through irradiation, in over-pressurizing the bubbles by using a combined molecular dynamics (MD) and cluster dynamics approach. Firstly, the energies for the annihilation of interstitials and vacancies at bubbles have been determined from MD as a function of bubble pressure. Secondly, these reaction energies have been implemented in the cluster dynamics code Centipede to determine the steady-state defect concentrations and bubble pressure under irradiation. It was found that there is a transition from low pressure bubbles, at high temperature, to high pressure bubbles, at low temperatures. This indicates the formation of over-pressurized bubbles in the low temperature periphery of the pellet, where high burnup structure forms. This result supports the hypothesis that over-pressurized bubbles form during steady-state operation and can then contribute to fragmentation during a transient. Future work will examine the influence of bubble pressure on Xe diffusion and study the impact of other sinks (e.g. grain boundaries and dislocations) that are relevant to high burnup structure. Ultimately, the goal is to provide predictions of the bubble pressure as a function of burnup that can be used to derive a more mechanistic fragmentation threshold for use in BISON.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Laboratory Investigation of Gas Transport Through Variably Saturated Rock [Slides]

Project Overview: Noble gas fission products, such as xenon (Xe), are monitored to detect nuclear tests. For well-contained subsurface tests, transport to the surface will impact detected isotopic ratios, complicating event identification. Role of water saturation in subsurface transport is not well understood. Historic tests have taken place near or below the water table. To accurately predict breakthrough times and fractionation, gas transport must be characterized through intact rock with variable saturation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Metal Organic Frameworks for Noble Gas Management in the Liquid Fluoride Thorium Reactor (LFTR) (CRADA 459)

The purpose of this project is to demonstrate the novel class of materials known as metal organic frameworks (MOFs) to capture Xe selectively from simulated LFTR off gas. This will establish the viability of designing a dramatically improved approach to noble gas management as compared to activated carbon. However, there are significant data gaps that need to be addressed in order to deploy this technology for LFTRs that include i) converting MOF powders into engineered forms to produce mechanically robust particles, ii) the radiation stability and associated mechanism of degradation (if any) upon irradiation of these sorbent materials and iii) demonstration and comparison to activated carbon of the noble gas separation from simulated LFTR gas stream.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2022

Nuclear Waste Attributes of SMRs Scheduled for Near-Term Deployment

The purpose of this study is to evaluate the nuclear waste attributes of Small Modular Reactors (SMRs) scheduled for deployment within this decade using available data and established nuclear waste metrics, with the results compared to a reference large Pressurized Water Reactor (PWR). The current fleet of commercial nuclear reactors in the U.S. is composed of 92 large Light Water Reactors (LWR) with an average electricity generating capacity of over 1,000 MWe each. These large LWRs built on-site in massive construction projects have been the mainstay of the industry for the last 50 years. However, new construction soon is expected to include several designs of smaller reactors primarily fabricated in factories and installed in the field in modules. Some of these SMRs will also be LWRs, while some will use other coolants such as liquid metals, molten salts or gases, and different types of fuels. The technologies and economics of SMRs have been the focus of many studies, but there has been only minimal information published on the amount of nuclear waste different types of SMRs are expected to generate and no reports focused on near-term-deployable designs. In this study, the nuclear waste attributes of three small reactors scheduled for near-term-deployment, VOYGR TM (from NuScale Power), Natrium TM ab (from TerraPower), and Xe-100 (from X-energy), were assessed by comparing nuclear waste metrics with those of a reference large Pressurized Water Reactor (PWR).

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2022

Report on Fuel Cycle Facility Requirements for Deployment of Demonstration Reactors and Potential Evolutionary Fuel Cycle Scenarios

A series of fuel cycle scenarios studies were performed to inform on fuel cycle capacities and facilities needed for large-scale deployment of the Advanced Reactor Demonstration Program (ARDP) reactors and potential future evolutionary fuel cycle scenarios. The reactor deployment and evolutionary fuel cycle scenarios from the present to 2100 were developed based on the following assumptions: 1) achievement of a net-zero emissions economy in the United States by 2050, which requires a nuclear energy generation capacity of ~250 GWe by 2050, 2) the U.S. economic growth of 1% per year from 2051 to 2100, which results in ~340 GWe of nuclear energy capacity in 2100, and 3) commercial-scale recycling and high burnup fuel technologies are available after 2050. Thus, evolutionary fuel cycles with those advanced nuclear technologies start after 2050. A single once-through fuel cycle scenario was assumed from the present to 2050 to achieve a net-zero emissions economy in the United States, and the following four evolutionary fuel cycle scenarios from 2051 to 2100 were considered, 1) Once through fuel cycle with ARDP reactors (Natrium and Xe-100), 2) Once-through fuel cycle with Breed-and-Burn (B&B) fast reactors, 3) Recycling fuel cycle of used metallic fuel in fast reactors, and 4) Recycle fuel cycle of both used uranium oxide and metallic fuels in fast reactors. The projected front-end and back-end fuel cycle capacity demands are compared with the current domestic and global (if needed) fuel cycle capacities.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Pros and Cons Analysis of HALEU Utilization in Example Fuel Cycles

The Systems Analysis and Integration campaign assessed the pros and cons of high-assay low-enriched uranium (HALEU) utilization in advanced reactors and associated fuel cycles. The assessment was done for three example fuel cycles at equilibrium states: once-through, limited recycle, and continuous recycle (CR) starting with HALEU. Front- and back-end fuel cycle parameters and the Levelized Cost of Fuel (LCF), which is the Levelized Cost of Electricity excluding reactor cost, of the three example fuel cycles were calculated using a single Analysis Example Reactor. The pros and cons of HALEU utilization were assessed by normalizing the fuel cycle parameters and LCF to a unit of electricity generation (GWe-year) and comparing them with a Basis of Comparison. In this study, a sodium-cooled reactor with sodium-bonded metallic fuel having a burnup of ~100 GWd/t was used as the Analysis Example Reactor because its technology readiness level is high, and the burnup and fuel enrichment are in the middle of those ranges of advanced reactor concepts that are under development. The current once-through Light Water Reactors (OT-LWRs) with <5% low-enriched uranium and 50 GWd/t burnup were used as the Basis of Comparison. In addition, a series of sensitivity analyses was conducted by varying burnup, enrichment, fuel forms, and reactor types to capture the design variations in two once-through Advanced Reactor Demonstration Program (ARDP) reactors, Natrium with sodium-free metallic fuel having a burnup of ~150 GW/t and Xe-100 with Tristructural-Isotropic (TRISO) pebble fuel having a burnup of ~168 GWd/t.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗