SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
University of California investigations to determine the usefulness of modern remote sensing techniques have concentrated on the water resources of the state. The studies consider in detail the supply, demand, and impact relationships.
The 1980 eruptions of Mount St. Helens in southeast Washington resulted in a pronounced effect on the surface and ground water resources of the state. In response to the volcanic activity, the U.S. Geological Survey intensified statewide surface and ground water sampling programs to determine the nature and magnitude of the volcanic-induced variations. Streams to the east of Mount St. Helens received the major ash fallout. Chemical effects were best noted in smaller streams sampled 60 to 70 miles northeast of Mount St. Helens. The chemical variations observed were pronounced but short lived. Sulfate and chloride increases in anionic composition were prevalent immediately following the eruption; however, the original bicarbonate predominance was again attained within several days. Suspended iron and aluminum concentrations were similarly elevated during the period of greatest ash deposition (highest turbidity); however, the dissolved concentrations remained relatively constant. Depressions of pH were minor and short lived. Streams draining to the south, tributaries to the Columbia river, showed little observable changes in water chemistry. Streams draining to the west (Toutle river and its tributaries) were compositionally affected by the various volcanic activities. Chloride and sulfate anion percentage exceeded the bicarbonate percentage up to one month following the eruption period. Streams and lakes sampled in the immediate vicinity of Mount St. Helens, in addition to trace metals, contained organic compounds derived from decomposing wood buried in the debris deposits. This organic material may constitute a significant source of organic compounds to surface and ground water for some time to come.
Degradation of Earth’s inland water resources due to anthropogenic perturbations and climate anomalies at both local and global scales continues to place human health at substantial risk. There is now a growing necessity to develop pragmatic approaches that allow timely and effective extrapolation of local processes, to spatially resolved global products, and to promote operational and sustainable resource policy management. This presentation will provide updates on NASA’s prototype open-source aquatic modeling platform, Spectral Water Inversion Processor and Emulator (SWIPE), which is a comprehensive, multi-faceted modeling platform for both forward and inverse modeling of diverse aquatic ecosystems from the benthos to top-of-atmosphere (TOA). SWIPE provides a cohesive application which leverages recent advancements in particle modeling, Big Data analytics, and machine learning to develop a high-fidelity synthetic training ground for sensitivity studies and algorithm development for multispectral or upcoming hyperspectral missions. Some of the prominent features of SWIPE to be discussed include: 1. Advanced hyperspectral modeling of globally diverse algal and non-algal particles using a novel two-layer coated sphere scattering model and radiative transfer modeling, 2. Massive, highly detailed synthetic spectral libraries of Analysis-Ready-Data (ARD) which include spectral libraries of particle microphysics, water biogeophysical and optical properties, as well as surface and TOA reflectances at 1 nm resolution, 3. An ensemble of pre-built analytic, machine learning, and deep learning inversion algorithms for various water quality and biodiversity related retrieval parameters and uncertainty quantification, 4. Sensor-agnostic water quality inversion at wide ranging spatial and spectral resolutions including a codebase for seamless application in the Google Earth Engine and NASA Earth Exchange (NEX) for planetary scale analysis. SWIPE will be a fully open-source platform based in python with comprehensive documentation, tutorials, and options for distributed computing on high performance computing clusters or on single, local machines. Further, we will discuss how we envision SWIPE contributing towards a global analysis of coastal and inland water quality dynamics.
We analyzed the latest climate model projections (CMIP6) of precipitation and temperature for the very high emissions scenario, SSP5-8.5, to detect potential future changes in the Middle East. A baseline period (1981-2010) was compared with the middle (2040-2069) and end (2070-2099) of the 21st century. The Tigris-Euphrates headwaters was identified as the hotspot of future compound effects of climate change in the region. In particular, the Southeastern Anatolia Project (in Turkish, GAP) region is likely to see the most dramatic compound changes of any area in the Middle East. That assessment was based on the model projections that showed rapid warming, increased interannual precipitation variability, and decreased precipitation all coinciding in an area of massive irrigation development and known transboundary water tension. It is likely that GAP would exacerbate environmental, agricultural, water conflict, and public health issues in the region, therefore its adverse impacts might outnumber its benefits in coming decades. This study attempts to warn decision-makers of the urgent need to integrate these trends to water resource planning and international negotiations.
As warming and drying trends continue to impact the greater American Southwest, effective ecosystem management increasingly relies upon understanding the relationships between climate and water resources. Ephemeral freshwater rock pools, known as tinajas, have great ecological and cultural importance as some of the only sources of surface water in the western Sonoran Desert (WSD). Tinaja flooding and drying cycles, known as hydroperiods, vary based on meteorologic and climatologic conditions; however, a lack of extensive research relating climatic impacts to tinajas puts these critical ecosystems further at risk. Tinajas throughout the WSD are monitored by the National Park Service (NPS) using resource intensive strategies including in situ trail camera observation and direct measurement. To aid NPS monitoring efforts, this research used remotely sensed climate data to analyze spatiotemporal climate trends and relationships between climate variables and tinaja hydroperiods in the WSD between 1979–2022. Using Aqua and Terra Moderate Resolution Imaging Spectroradiometers (MODIS), University of Idaho Gridded Surface Meteorological Dataset (gridMET), and OpenET data, the project analyzed land surface temperature, evapotranspiration, precipitation, wind velocity, and solar radiation. The team generated climate anomaly time series and climate normal maps for the WSD, identifying statistically significant spatial and temporal trends. These data were then compared to daily, qualitative in situ hydroperiod observations taken between 2019–2022. This work will be used by the NPS to inform the monitoring and protection of tinajas in the WSD. Findings contribute to a limited body of research concerning climate and tinajas, which are often overlooked despite their disproportionate ecological importance.
The utility of TM data natural resource assessment was evaluated with emphasis on manual interpretation and digital classification. The improved spatial resolution of TM data, as compared with MSS data, aided in the location of roads, small stock ponds, and many other land features, permitting positive identification of landmarks. With the TM, there was more efficient manual interpretation of land use, better identification of resource types, and improved assessment of the ecological status of natural vegetation. Band 5 and band 7 aided in defining water resources, wetland vegetation resources, and other terrain features. Results from TM and TM simulator data suggest that the coefficient of variation for major land cover types is less for TM data than for equivalent MSS data. Although the amount of information in bands 5 and 7 is small, it is unique since the same information cannot be derived from the MSS four-band spectral region.
This paper presents an approach to measuring the major components of the water cycle from space using the concept of a sensor-web of satellites that are linked to a data assimilation system. This topic is of increasing importance, due to the need for fresh water to support the growing human population, coupled with climate variability and change. The net effect is that water is an increasingly valuable commodity. The distribution of fresh water is highly uneven over the Earth, with both strong latitudinal distributions due to the atmospheric general circulation, and even larger variability due to landforms and the interaction of land with global weather systems. The annual global fresh water budget is largely a balance between evaporation, atmospheric transport, precipitation and runoff. Although the available volume of fresh water on land is small, the short residence time of water in these fresh water reservoirs causes the flux of fresh water - through evaporation, atmospheric transport, precipitation and runoff - to be large. With a total atmospheric water store of approx. 13 x 10(exp 12)cu m, and an annual flux of approx. 460 x 10(exp 12)cu m/y, the mean atmospheric residence time of water is approx. 10 days. River residence times are similar, biological are approx. 1 week, soil moisture is approx. 2 months, and lakes and aquifers are highly variable, extending from weeks to years. The hypothesized potential for redistribution and acceleration of the global hydrological cycle is therefore of concern. This hypothesized speed-up - thought to be associated with global warming - adds to the pressure placed upon water resources by the burgeoning human population, the variability of weather and climate, and concerns about anthropogenic impacts on global fresh water availability.
In December of 1974 the John F. Kennedy Space Center, NASA, and the Water Resources Division, United States Geological Survey (USGS), acquired photographic, thermal, and multispectral data over the Cumberland region of eastern Tennessee. This data was effectively used to delineate ground water sources, and surface water runoff into river systems in the Cumberlands. The data, coupled with an overview of the area from the Earth Resources Technology Satellite (ERTS), could be useful in determining hydrologic conditions in coal mining regions of the Appalachians.
Dye laser, emitting four wavelengths sequentially in time, has been incorporated into helicopter-borne lidar flight package, for performing studies of laser-induced fluorescence of chlorophyll A in algae. Data obtained by multicolor lidar technique can provide water-resource management with rapid-access wide-area coverage of the impact of various environmental factors for any body of water.
ISRU involves any hardware or operation that harnesses and utilizes in-situ resources (natural and discarded) to create products and services for robotic and human exploration: Assessment of physical, mineral chemical, and volatile water resources, terrain, geology, and environment (orbital and local). Production of replacement parts, complex products, machines, and integrated systems from feedstock derived from one or more processed resources. Civil engineering, infrastructure emplacement, and structure construction using materials produced from in situ resources. Radiation shields, landing pads, roads, berms, habitats, etc. Generation and storage of electrical, thermal, and chemical energy with in situ derived materials. Solar arrays, thermal wadis, chemical batteries, etc. ISRU is a disruptive capability: Enables more affordable exploration than todays paradigm. Allows more sustainable architectures to be developed. Understand the ripple effect in the other Exploration Elements: MAV: propellant selection, higher rendezvous altitude (higher DV capable with ISRU propellants). EDL: significantly reduces required landed mass. Life Support: reduce amount of ECLSS closure, reduce trash mass carried through propulsive maneuvers. Power: ISRU drives electrical requirements, reactant and regeneration for fuel cells for landers, rovers, and habitat backup. Every Exploration Element except ISRU has some flight heritage (power, propulsion, habitats, landers, life support, etc.) ISRU will require a flight demonstration mission on Mars before it will be included in the critical path. Mission needs to be concluded at least 10 years before first human landed mission to ensure lessons learned can be incorporated into final design. ISRU Formulation team has generated a (still incomplete) list of over 75 technical questions on more than 40 components and subsystems that need to be answered before the right ISRU system will be ready for this flight demo.
Mission plans and objectives of the ERTS 2 Satellite are presented. ERTS 2 follow-on investigations in various scientific disciplines including agriculture, meteorology, land-use, geology, water resources, oceanography, and environment are discussed. Spacecraft design and its sensors are described along with the Delta launch vehicle and launch operations. Applications identified from ERTS 1 investigations are summarized.
The possibilities for the use of high spectral resolution analysis in the field of hydrology and water resources are examined. Critical gaps in scientific knowledge that must be filled before technology can be evaluated involve the spectral response of water, substances dissolved and suspended in water, and substances floating on water. The most complete mapping of oil slicks can be done in the ultraviolet region. A mean of measuring the ultraviolet reflection at the surface from satellite altitudes needs to be determined. The use of high spectral resolution sensors in a reasonable number of narrow bands may be able to sense the reflectance or emission characteristics of water and its contained materials that can be correlated with commonly used water quality variables. Technological alternative available to experiment with problems of sensing water quality are to use existing remote sensing instrumentation in an empirical mode and to develop instruments for either testing hypoteses or conducting empirical experiments.
This candidate solution suggests the use of GPM precipitation observations to enhance the CERP. Specifically, GPM measurements could augment in situ precipitation data that are used to model agricultural phosphorus discharged into the Everglades. This solution benefits society by aiding water resource managers in identifying effective phosphorus reduction scenarios and thereby returning the Everglades to a more natural state. This solution supports the Water Management, Coastal Management, and Ecological Forecasting National Applications.
The use of LANDSAT for water resources applications in U.S. state demonstration projects is reviewed. The most common single application undertaken between 1976 and 1981 was found to be water condition assessment. The majority of projects, however, fell into the general category of watershed hydrology. Some of the states are attempting to use LANDSAT data in an operational mode for water quality assessment. Two of these state projects from Vermont and Wisconsin are described in brief. The basic information requirements of Section 314 of the U.S. Pollution Control Act are given with the type of input LANDSAT data could potentially provide toward those requirements. Surveys were performed to determine: (1) how its states were responding in 1980 to 1981 to the federal and state water quality laws; and (2) the status of LANDSAT analysis capabilities of each state.
The science goals for the Mars exploration program, together with the HEDS precursor environmental and technology needs, have been carefully laid out over the last several years and serve as a solid starting point for re-planning the program in an orderly way. Most recently, the science and HEDS communities have recognized the significance of subsurface sampling as a key component in "following the water": 1) to achieve science goals related to the search for evidence of life and 2) to gain access to the most valuable resource -- water. Accessing samples from hundreds and even thousands of meters beneath the surface is a challenge that will call for technology development and for one or more demonstration missions. Recent mission failures and concerns about the complexity of the previously planned MSR missions indicate that, before we are ready to undertake sample return and deep sampling, the Mars exploration program needs to include 1) technology development missions and 2) basic landing site assessment missions. These precursor missions should demonstrate the capability for reliable & accurate soft landing and in situ propellant production. The precursor missions will need to carry out close-up site observations, ground-penetrating radar mapping from orbit and conduct seismic surveys. The needs of the science and HEDS program requirements have much in common and clearly the programs should be planned as a single, continuous exploration effort. (We note that, although we are not yet ready to carry out sample return missions, we already have the capability to make impressive gains in in situ exploration by deploying full-scale rovers with mobility upward of ten kilometers.) A prudent minimum list of missions can be derived from the numerous goals and requirements; they can be sequenced in an orderly way to ensure that time is available to feed forward the results of the precursor missions.
Resource investigation in the lunar poles is of importance to the potential impact of in-situ resource utilization (ISRU). The RESOLVE project developed a payload to investigate the permanently shadowed areas of the lunar poles and demonstrate ISRU technology. As a part of the RESOLVE project, the regolith volatile characterization (RVC) subsystem was designed to examine the release of volatiles from sample cores. The test sample was heated in the reactor to release the volatiles where they were analyzed with gas chromatography. Subsequently, the volatile sample was introduced into the lunar water resource demonstration (LWRD) subsystem where the released hydrogen and water were selectively captured. The objective of the Regolith Volatile Characterization (RVC) subsystem was to heat the crushed core sample and determine the desorption of volatile species of interest. The RVC subsystem encompasses the reactor and the system for volatile analysis. The system was designed to analyze H2, He, CO, CO2, N2, 02, CH4, H2S and H2O. The GC chosen for this work is a Siemens MicroSAM process GC with 3 columns and 8 TCD detectors. Neon was chosen as the carrier gas to enhance the analysis of hydrogen and helium.The limit of detection for the gases is approx.1000ppm for H2, CO. CO2 , N2, O2 and H2 S. The limit of detection for CH4 is approx.4000ppm and the water limit of detection is -10000 ppm with a sample analysis time of 2-3 minutes. These values (with the exception of water and H2S) were determined by dilution of a six gas mixture from Scott Gas (5% CO2, CO, O2, N2, 4% CH4 and H2) using mass flow controllers (MFC5). Water was calibrated at low levels using an in house relative humidity (RH) generator. H 2S and high concentrations of H2 were calibrated by diluting a pure stream of gas with MFCs. Higher concentrations of N2 and 02 were calibrated using Air again diluting with MFCs. There were three modification goals for the GC in EBU2 that would allow this process GC to be used in the field demo for RESOLVE. The first modification was to decrease the weight associated with the GC, this included eliminating the explosion proof case (Figure 1) and replacing it with a lightweight case as well as using an on board COPV tank for the neon carrier gas. The next goal was to add a second oven for the molecular sieve column to allow for dual temperature control during GC operation; the separation of hydrogen and helium is optimum at lower temperatures while the water analysis required higher temperatures creating a competing design requirement. The second oven also allows a lower limit of detection for water quantification and avoids the possibility of water condensing in the GC which could ruin the column characteristics. The final goal was to modify the column arrangement to optimize the system for our specific application. Figure 2 shows the internal details of the module optimized optimized for our field application. The modifications and performance of the gas analysis system will be discussed in detail.
There are no author-identified significant results in this report. Results of an integrated study of earth resources in the state of California using ERTS-1 and supporting aircraft data are presented. Areas of investigation cover (1) regional agricultural surveys; (2) solving water resource management problems; (3) resource management in Northern California using ERTS-1 data; (4) analysis of river meanders; (5) assessment and monitoring change in west side of the San Joaquin Valley and central coastal zone of state; (6) assessment and monitoring of changes in Southern California environment; (7) digital handling and processing of ERTS-1 data; (8) use of ERTS-1 data in educational and applied research programs of the Agricultural Extension Service; and (9) identification, classification, and mapping of salt affected soils.
The use of NASA high altitude aerial photography of south eastern Arizona to develop a natural resources information system for Federal lands is discussed. The data are to be used by local, State, and Federal agencies in connection with geologic mapping projects, water resources investigations, and land use studies to determine the alignment of a proposed major aqueduct. In addition, the data are used to confirm land ownership boundaries, detect changes in land use, and legislative reappointment mapping. Other applications include mapping vegetive cover, evaluation of changes in wildlife habitat, location of deer kills, and as a base for recording telemetry data from radio-collared big game animals.