Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Voids”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

SnS Homojunction Solar Cell with n-Type Single Crystal and p-Type Thin Film

Herein, a pn homojunction SnS solar cell is fabricated for the first time by the deposition of p-type SnS polycrystalline thin films on the recently reported large n-type SnS single crystals. The p-type thin films consist of columnar grains that grow along the <100> direction, which is the same orientation as the n-type single crystal. In addition, the interface of the pn homojunctions is void-free and compositionally sharp. The SnS homojunction solar cell achieves an open-circuit voltage (VOC) of 360 mV, which is as large as the highest VOC of previously reported SnS-based heterojunction solar cells. The built-in potential of the homojunction cell is 0.92 eV, which is close to the bandgap energy of SnS (≈1.1 eV), and larger than reported for heterojunctions (≈0.7 eV). The resulting 1.4% conversion efficiency (n) of the homojunction solar cell is smaller than the record 4–5% in heterojunctions, mainly due to the low short-circuit current density (J SC ) of 7.5 mA cm -2 . Once the device structure of the homojunction cell is optimized to efficiently collect the photogenerated carriers and achieve a comparable J SC as the conventional heterojunction cells (≈25 mA cm -2 ), high n exceeding 4–5% will be realized with improving the VOC.

14 SOLAR ENERGY↗
DOE OSTI2025

Fragme∩t: An Open‐Source Framework for Multiscale Quantum Chemistry Based on Fragmentation

Fragment-based quantum chemistry offers a means to circumvent the nonlinear computational scaling of conventional electronic structure calculations, by partitioning a large calculation into smaller subsystems then considering the many-body interactions between them. Variants of this approach have been used to parameterize classical force fields and machine learning potentials, applications that benefit from interoperability between quantum chemistry codes. However, there is a dearth of software that provides interoperability yet is purpose-built to handle the combinatorial complexity of fragment-based calculations. To fill this void we introduce “Fragme∩t”, an open-source software application that provides a tool for community validation of fragment-based methods, a platform for developing new approximations, and a framework for analyzing many-body interactions. Fragme∩t includes algorithms for automatic fragment generation and structure modification, and for distance- and energy-based screening of the requisite subsystems. Checkpointing, database management, and parallelization are handled internally and results are archived in a portable database. Interfaces to various quantum chemistry engines are easy to write and exist already for Q-Chem, PySCF, xTB, Orca, CP2K, MRCC, Psi4, NWChem, GAMESS, and MOPAC. Applications reported here demonstrate parallel efficiencies around 96% on more than 1000 processors but also showcase that the code can handle large-scale protein fragmentation using only workstation hardware, all with a codebase that is designed to be usable by non-experts. Fragme∩t conforms to modern software engineering best practices and is built upon well established technologies including Python, SQLite, and Ray. The source code is available under the Apache 2.0 license.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Structure-Composition Subtleties in NaZn 13 -type Derivatives of Sr/Ca(Au x Al 1– x ) 12–13

In the ternary (Sr/Ca)-Au-Al phase space for 5–8 at % Sr/Ca and nearly equimolar mixture of Au and Al, five new NaZn 13 -derivatives Sr/Ca(Au x Al 1–x ) 12–13 were discovered and their atomic site preferences and electronic structures were studied: (1) at higher Au content, cubic SrAuxAl 13–x [7.24(2) ≥ x ≥ 6.68(2)] shows no obvious atomic site preferences; (2) at lower Au content, tetragonal SrAu x Al 13–x [6.59(1) ≥ x ≥ 6.35(3)] shows icosahedra exclusively centered by Al and preferential atomic arrangements to maximize the number of Au–Al (or Al-rich) shortest distances; (3) a monoclinic SrAu 6.10(3) Al 6.40 compound was uncovered from studies of a single crystal specimen with problematic refinement issues but more detailed powder X-ray diffraction analysis which suggest even more pronounced geometric distortion from the NaZn 13 -type structure as well as preferential arrangements for Au–Al nearest contacts; (4) tetragonal SrAu 5.75(2) Al 6.25 with all empty icosahedra; and (5) orthorhombic CaAu 6.09(2) Al 6.01(1) with icosahedra that are half empty and half partially occupied by Al. Electronic DOS and COHP curves were used to rationalize the structural depiction of Sr/Ca(Au x Al 1–x ) 12–13 as icosahedra packing of (Au x Al 1–x) 12–13 with voids filled by the electropositive Sr/Ca.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Synthesis, Crystal and Electronic Structure of La 2 SiP 4

La 2 SiP 4 (mP-28, Z=4, Wyckoff sequence e 7 , space group P2 1 /c (No. 14), a=10.8230(6) Å, b=7.5208(4) Å, c=7.9189(4) Å, and β=105.389(2)°) which crystallizes in the La 2 CuS 4 structure type is reported here. Instead of isolated CuS 3 triangles bridged by disulfide anions, in the crystal structure of La 2 SiP 4 , one-dimensional zig-zag chains composed of SiP 4 tetrahedra connected by P–P bonds are present. Lanthanum cations fill the voids between the chains and are coordinated by either 9P or 8P+Si atoms. La2SiP4 is a narrow bandgap semiconductor with calculated and measured optical bandgaps of 0.35 eV and 0.85(1) eV, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Eigenfrequency constrained topology optimization of finite strain hyperelastic structures

This paper incorporates hyperelastic materials, nonlinear kinematics, and preloads in eigenfrequency constrained density–based topology optimization. The formulation allows for initial finite deformations and subsequent small harmonic oscillations. The optimization problem is solved by the method of moving asymptotes, and the gradients are calculated using the adjoint method. Both simple and degenerate eigenfrequencies are considered in the sensitivity analysis. A well-posed topology optimization problem is formulated by filtering the volume fraction field. Numerical issues associated with excessive distortion and spurious eigenmodes in void regions are reduced by removing low volume fraction elements. The optimization objective is to maximize stiffness subject to a lower bound on the fundamental eigenfrequency. Numerical examples show that the eigenfrequencies drastically change with the load magnitude, and that the optimization is able to produce designs with the desired fundamental eigenfrequency.

42 ENGINEERING↗
DOE OSTI2025

Laser powder bed fusion parameter estimation with k-NN

Abstract Laser powder bed fusion (L-PBF) is a technique within additive manufacturing that uses a high power density laser to build parts from fused powdered metal alloy. This technology is well equipped to produce complex parts with otherwise impossible features, such as hidden voids or lattice structures. Alongside capability, reliability and quality are key characteristics considered when choosing a manufacturing method, and these are gaining attention as this method becomes more prevalent in industry. One main indicator of a stable L-PBF process is consistent melt pool geometry, and the properties of which are likely to determine the quality of the part produced. As computing power and sensing technologies become more advanced, this melt pool geometry could be studied in real time. This work addresses the challenge by leveraging a k-nearest neighbor (k-NN) model to identify key features within melt pool imagery and predict the energy density. The k-NN model was trained on data provided by the National Institute of Standards and Technology (NIST). Data preprocessing was performed on the images to extract features that were used in the k-NN model. This approach was used to accurately infer the energy density of unseen layers within the same part. The algorithm was subsequently tested with unique scan strategies and found to reasonably estimate the energy density of different parts. A fivefold cross validation found the algorithm to be consistently predicting the class of 91.4% of the in situ melt pool images.

Jung, Patrick (ORCID:0000000267890859)↗
DOE OSTI2023

Archeological wood conservation with selected organosilicon compounds studied by XFM and nanoindentation

Waterlogged wood conservation is a complex and challenging task. Detailed knowledge about the interactions between the applied chemicals and wood is necessary to ensure the effective and safe conservation of wooden artifacts. The present research aims to determine the mechanism of dimensional stabilization of archeological wood by organosilicon compounds using the combination of synchrotron-based X-ray fluorescence microscopy (XFM) and nanoindentation. Archeological oak wood was treated with methyltrimethoxysilane, (3-mercaptopropyl)trimethoxysilane, or 1,3-bis-[(diethylamino)-3-(propoxy)propan-2-ol]-1,1,3,3-tetramethyldisiloxane, which in previous studies were found to be more effective than other organosilicons in stabilizing wood dimensions. The XFM and nanoindentation results showed that all three organosilicons infiltrated wood cell walls and enhanced their mechanical properties. The XFM also showed that part of the chemicals filled some void spaces like cell lumina. Based on the results obtained here and in our previous research, it is determined that the mechanism of archeological wood dimensional stabilization by organosilicon treatment is complex and likely involves both filling cell lumina and infiltration into cell walls where organosilicons interact with wood polymers.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Investigation of fracture in porous materials: a phase-field fracture study informed by ReaxFF

Microscopic features (e.g, pore shapes, sizes, and distribution) in porous material substantially affect the overall mechanical properties such as stiffness and strength. In turn, these material properties determine the macroscopic behaviors of fracture in the porous material. In certain cases, macroscopic properties can be derived from the porous skeleton and void ratio (i.e., porosity), but in many other cases, such derivation is a challenging task. This paper presents a numerical investigation of microporosity and micropore shapes effect on the macrofracture behavior in porous amorphous silica. For this study, we extend the recently-proposed combined molecular dynamic (MD) and phase-field (PF) fracture modeling approach by including different pore shapes in the atomistic domain. In the MD simulations, we adopt ReaxFF to evaluate the material properties, where four different micropore cases are considered. Based on the material properties derived from MD simulations, the macrofracture propagation of porous media is studied using hybrid PF simulation. In the characterization of the pore structure, the concept of pore ligament is proposed to relate the pore shape and the critical energy release rate. Two classical fracture problems were used to evaluate the effect of pore shape on the macrofracture behavior. The results of the case study show that although the micropore shapes change the macrofracture behaviors, these effects vary with the geometry and loading conditions of macroscopic boundary value problems. Furthermore, the case study also shows that the influence of micropore structure can be captured at the macroscopic level through the material properties derived from the MD simulations.

42 ENGINEERING↗
DOE OSTI2022

Approaching air buoyancy in aero/cryogel vacuum vessels

Air impermeability has been observed in low-density aerogel and cryogel materials, which has led to a series of experiments to investigate the feasibility of an air buoyant vacuum vessel, as well as the fabrication and testing of sub-buoyant prototypes. Here, bulk samples of silica aerogel were shown to isolate vacuum from ambient air for several hours with optimal vacuum isolation occurring at a density of approximately 85 mg cm –3 . It was demonstrated using polyimide aerogel and cryogel materials that the ability of these foam materials to provide an air impermeable layer between vacuum and atmosphere, in spite of being comprised of mostly void space, is related to material stiffness. It is hypothesized that this behavior is due to local deformation of the random nanostructure of the material. Spherical shell vacuum vessels were produced using the polyimide cryogel, and less than 133 Pa vacuum containment was demonstrated under active pumping. In order to approach the non-buoyant to buoyant transition for these vacuum vessels, a polyimide composite was produced using helical fibers for which preliminary mechanical testing was performed.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Optimized Viewing Techniques to Minimize Radiation Damage From X-ray Imaging Systems

X-ray inspection of ball grid arrays (BGAs) is typically performed at one or more viewing angles to examine adhesion sites for errors such as voids, joint cracking, or head-in-pillow. During this inspection process, the cir cuit board assembly is subject to ionizing radiation exposure, which can cause trapped charge within oxide layers of semiconductor devices. Some x-ray machines allow for programmable inspection routines, which could be used to optimize radiation exposure to semiconductor components. Using Monte Carlo methods, x-ray inspection of a BGA was simulated to determine a range of acceptable viewing angles. Dose rates to circuit board components were estimated at each inspection angle to determine the view resulting in optimized radiation exposure. Results showed that for each BGA, the maximum unobstructed viewing times without exceeding a 5 Gy dose limit to a single part ranged from 82 to 94 minutes. Using a radiation cost function method, optimized viewing across all components was found. Here, it was observed that for a consistent dose limit applied to silicon-based components, performing inspection with BGAs facing the x-ray source was optimal. A third method was applied, assigning individual dose limits based on empirical data from the NASA Goddard Space Flight Center radiation database. This method showed that optimized viewing maximizes the distance between the radiation source and highly sensitive components. It was also observed that cumulative effects from viewing two BGAs will influence viewing angles, causing the optimal view of one BGA to exist nearly 180° from the other.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2023

Compatibility of mesophase pitch and linear low-density polyethylene for low-cost carbon fiber

Mesophase pitch and linear low-density polyethylene (LLDPE) were blended by shear mixing and extruded producing precursor fibers which were then converted to carbon fibers (CFs). LLDPE additives agglomerate within the isotropic spheres rather than uniformly dispersing throughout the entire matrix. The blends possess different thermal properties and precursor tensile properties evident by two-phase tensile stress nature not present in precursor fibers produced from pure pitch. The resultant CFs were oxidized at 280 °C for 4 h and carbonized at 1000 °C for 15 min. This process created pitch CFs with a tensile strength of 1.23 GPa and a Young’s modulus of 99 GPa. All CFs produced from blends of pitch and LLDPE possessed a tensile strength of 0.63 GPa and less. These CFs showed a microstructure slightly different from the pure pitch CFs with fractured CF cross sections revealing voids present in all blended CFs due to burnt off LLDPE stemming from carbonization. Further study into compatibilizers and new conversion processes is required to successfully blend LLDPE with mesophase pitch for the purpose of producing a new low-cost CF.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Targeted metabolomic analysis identifies increased serum levels of GABA and branched chain amino acids in canine diabetes

Introduction Dogs with naturally occurring diabetes mellitus represent a potential model for human type 1 diabetes, yet signifcant knowledge voids exist in terms of the pathogenic mechanisms underlying the canine disorder. Untargeted metabolomic studies from a limited number of diabetic dogs identifed similarities to humans with the disease. Objective To expand and validate earlier metabolomic studies, identify metabolites that difer consistently between diabetic and healthy dogs, and address whether certain metabolites might serve as disease biomarkers. Methods Untargeted metabolomic analysis via liquid chromatography-mass spectrometry was performed on serum from diabetic (n=15) and control (n=15) dogs. Results were combined with those of our previously published studies using identical methods (12 diabetic and 12 control dogs) to identify metabolites consistently diferent between the groups in all 54 dogs. Thirty-two candidate biomarkers were quantifed using targeted metabolomics. Biomarker concentrations were compared between the groups using multiple linear regression (corrected P<0.0051 considered signifcant). Results Untargeted metabolomics identifed multiple persistent diferences in serum metabolites in diabetic dogs compared with previous studies. Therefore, targeted metabolomics showed increases in gamma amino butyric acid, valine, leucine, isoleucine, citramalate, and 2-hydroxyisobutyric acid in diabetic versus control dogs while indoxyl sulfate, N-acetyl-L-aspartic acid, kynurenine, anthranilic acid, tyrosine, glutamine, and tauroursodeoxycholic acid were decreased. Conclusion Several of these fndings parallel metabolomic studies in both human diabetes and other animal models of this disease. Given recent studies on the role of GABA and branched chain amino acids in human diabetes, the increase in serum concentrations in canine diabetes warrants further study of these metabolites as potential biomarkers, and to identify similarity in mechanisms underlying this disease in humans and dogs.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Tasting nuclear pasta made with classical molecular dynamics simulations

Nuclear clusters or voids in the inner crust of neutron stars were predicted to have various shapes collectively nicknamed nuclear pasta. Furthermore, the recent review by López, Dorso and Frank summarized their systematic investigations into properties especially the morphological and thermodynamical phase transitions of the nuclear pasta within a Classical Molecular Dynamics model, providing further stimuli to find more observational evidences of the predicted nuclear pasta in neutron stars.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Triaxial Constraint and Tensile Strength Enhancement in Brazed Joints

A brazed joint consists of a low-melting point and thin interlayer sandwiched between the high-melting-point base materials, in which the interlayer strength is typically lower than that of the base material. When this butt-joined composite is loaded uniaxially in the direction perpendicular to the plane of the brazing layer, the tensile strength is found to be much higher than that of the braze. This seems to violate the iso-stress condition in such a butt-joint serial configuration. Furthermore, the stress triaxiality has been usually ascribed, but without a quantitative rationalization, as being responsible for this tensile strength enhancement. Here a complete finite element simulation has been conducted to study the dependence of triaxiality and strength enhancement on geometric and material parameters. Two asymptotic limit solutions (based on Bridgman and Xia–Shih solutions, respectively) have been identified to understand the simulation results. The critical role of void evolution has been revealed when making a quantitative comparison to available experiments. In addition, ductility of the brazed joint, which has not been fully addressed in literature, is investigated by the Gurson–Tvergaard–Needleman model.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Defect Characterization Using Positron Annihilation Spectroscopy on Laser-Ablated Surfaces

In recent years, short, pulsed laser ablation has been gaining popularity for machining small-scale test geometries from bulk samples and for efficient serial sectioning. These laser-based techniques are being added to the toolbox in material science, which makes it necessary to understand the changes in the material that occur from the laser–material interaction. Positron annihilation spectroscopy is a unique, nondestructive technique to investigate small defects in materials difficult to investigate by other tools. In this work, Doppler broadening and positron lifetime annihilation spectroscopy are utilized to help quantify the damage in materials treated with short, pulsed lasers. Using a femtosecond laser on single crystal silicon, this manuscript shows that clusters of vacancy-like defects and small voids increase systematically with laser power. Lastly, the damage induced by the laser can also reach to micrometer depths.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Probing the Mechanical Performance of Micro-architected Porous Structures Through In Situ Characterization and Analysis

Micropores play critical roles in both natural and man-made materials. Such pores take on a variety of shapes and sizes ranging from spherical to irregular sphere-like voids with diameters spanning from the nanometer to millimeter scales. When porous structures are mechanically loaded, the pores direct the stress around their free surfaces, altering the material’s mechanical response relative to fully dense materials. In this study, for the first time, we create micro-architected porous samples using nanolithography and investigate the role of pore morphology by conducting a series of in situ micropillar compression tests in scanning electron microscopy. The findings demonstrate that porosity is the primary factor influencing the mechanical response of these micro-architected materials, as often seen on a macroscopic level. Additionally, we observed that pore geometry had a significant impact on Young’s modulus, yield stress, and strain energy density as a secondary parameter. Then, the extracted Young’s modulus was compared to macroscopic empirical models and determined the analytical models sufficiently described the impact of porosity in the microscopic scale but failed to capture the impact of second-order parameters. Furthermore, these results suggest how porous materials can be tailored to achieve desired mechanical properties based on the engineering applications of interest.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Stress relaxation cracking susceptibility evaluation in 347H stainless steel welds

Abstract Stress relaxation cracking (SRC) has been reported as a dominant failure mechanism for 347H stainless steel welds at elevated service temperatures, occurring in either the heat-affected zone (HAZ) or fusion zone (FZ). In this study, SRC susceptibility of physically simulated HAZ and cross-welded E347-347H stainless steel welds was studied using a four-step accelerated SRC test with a thermomechanical physical simulator. The stress and temperature range studied represents weld-induced residual stress at 150–600 MPa and post-weld heat treatment temperatures between 800 and 1050 °C. For all temperature conditions, the cross-welded samples failed at a lower critical stress threshold than the simulated HAZ. A finite element model of a 50.8-mm-thick single-V groove weld was used to generate the residual stress maps induced by a 40-pass welding procedure, which in combination with the experimental threshold stress map predicted potential SRC failure locations. Postmortem microstructural evaluations were performed to identify contributing characteristics to SRC. It was found that HAZ samples exhibited a combination of creep void development, secondary cracks with intergranular fracture near grain boundary carbides, and eutectic phases. FZ samples showed brittle fracture with cracks propagating along straight, non-tortuous interdendritic grain boundaries.

42 ENGINEERING↗
DOE OSTI2022

Unveiling the Universe with emerging cosmological probes

The detection of the accelerated expansion of the Universe has been one of the major breakthroughs in modern cosmology. Several cosmological probes (Cosmic Microwave Background, Supernovae Type Ia, Baryon Acoustic Oscillations) have been studied in depth to better understand the nature of the mechanism driving this acceleration, and they are being currently pushed to their limits, obtaining remarkable constraints that allowed us to shape the standard cosmological model. In parallel to that, however, the percent precision achieved has recently revealed apparent tensions between measurements obtained from different methods. These are either indicating some unaccounted systematic effects, or are pointing toward new physics. Following the development of CMB, SNe, and BAO cosmology, it is critical to extend our selection of cosmological probes. Novel probes can be exploited to validate results, control or mitigate systematic effects, and, most importantly, to increase the accuracy and robustness of our results. This review is meant to provide a state-of-art benchmark of the latest advances in emerging “beyond-standard” cosmological probes. We present how several different methods can become a key resource for observational cosmology. In particular, we review cosmic chronometers, quasars, gamma-ray bursts, standard sirens, lensing time-delay with galaxies and clusters, cosmic voids, neutral hydrogen intensity mapping, surface brightness fluctuations, stellar ages of the oldest objects, secular redshift drift, and clustering of standard candles. The review describes the method, systematics, and results of each probe in a homogeneous way, giving the reader a clear picture of the available innovative methods that have been introduced in recent years and how to apply them. The review also discusses the potential synergies and complementarities between the various probes, exploring how they will contribute to the future of modern cosmology.

79 ASTRONOMY AND ASTROPHYSICS↗