SEARCH · Engineering Papers
Results for “Transients (Dynamics)”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Theory of bubble dynamics in condensed explosive during start-up transient
Test firings with experimental liquid propellant gun systems indicate that the main concern standing in the way of practical application of LPG's is the possibility of unexpected explosions during start up when pressure is rapidly applied to the liquid monopropellant in the chamber. The phenomenon of many collapse-rebound cycles of imploding bubbles is theorized as the probable cause of explosions in LP systems. It may be concluded that LPG safety would be enhanced by choosing an LP with low bulk modulus, as well as low decomposition reaction rate, and that a benign looking DTA trace is not a sufficient quarantee of insensitivity to a pressure induced explosion. It is also shown that pre-pressurizing an LP charge, thus pre-compressing the bubbles near-isothermally, makes the system relatively insensitive to such pressure induced explosions. The applicability of this analysis to the question of acceleration induced explosion of explosive filled warheads is indicated.
Transient analysis techniques in performing impact and crash dynamic studies
Because of the emphasis being placed on crashworthiness as a design requirement, increasing demands are being made by various organizations to analyze a wide range of complex structures that must perform safely when subjected to severe impact loads, such as those generated in a crash event. The ultimate goal of crashworthiness design and analysis is to produce vehicles with the ability to reduce the dynamic forces experienced by the occupants to specified levels, while maintaining a survivable envelope around them during a specified crash event. DYCAST is a nonlinear structural dynamic finite element computer code that started from the plans systems of a finite element program for static nonlinear structural analysis. The essential features of DYCAST are outlined.
Numerical analysis of ignition transients in solid rocket motors
A model to analyze the unstready multidimensional turbulent flow in the head-end, star slot section of a solid rocket motor during the ignition transient is developed. The present paper examines the fluid dynamic aspects of the starting transient. A finite-difference solution of the unsteady, compressible, full Navier-Stokes equations, together with a two-equation k-epsilon turbulence model, is obtained utilizing the MacCormack explicit, predictor-corrector technique. Computed results for the flow in the slot are compared with experimental data obtained in cold flow tests of a scaled model of the Space Shuttle SRM head-end, star grain section. The agreement between the calculated flowfield and existing experimental data is very good.
Rocket Engine Nozzle Side Load Transient Analysis Methodology: A Practical Approach
During the development stage, in order to design/to size the rocket engine components and to reduce the risks, the local dynamic environments as well as dynamic interface loads must be defined. There are two kinds of dynamic environment, i.e. shock transients and steady-state random and sinusoidal vibration environments. Usually, the steady-state random and sinusoidal vibration environments are scalable, but the shock environments are not scalable. In other words, based on similarities only random vibration environments can be defined for a new engine. The methodology covered in this paper provides a way to predict the shock environments and the dynamic loads for new engine systems and new engine components in the early stage of new engine development or engine nozzle modifications.
Collision Free Dynamic Stability of Formations Using Projection Based Estimators
Transient instability is a phenomenon where inter- agent collisions can occur in dynamically stable formations of autonomous agents. Therefore, the necessity to manage and mitigate transient instabilities is essential for successfully deploying formation structures. This paper develops a novel control architecture that augments the baseline formation maintenance controller to mitigate transient instabilities. At its heart, the proposed architecture consists of a projection operator based estimator disguised as a reference model that generates collision-free trajectories for the agents to follow. This paper’s main theoretical result shows that the proposed control architecture can simultaneously mitigate transient instabilities and guarantee asymptotic convergence of the formation dynamics. Also, an illustrative example demonstrates the theoretical developments presented in this paper.
Transient pressure measuring methods research Summary technical report, 1 Jan. - 30 Jun. 1965
Transient pressure transducers for measuring dynamic pressures in rocket thrust chambers
How Moist and Dry Intrusions Control the Local Hydrologic Cycle in Present and Future Climates
Models disagree on the magnitude of the intensification of hydrologic cycle extremes under climate change. Changes in these extremes are expected to scale with the Clausius-Clapeyron relation but may locally diverge due to the uncertain response of the atmospheric general circulation. Recent work has identified that the circulation contribution (the “dynamic” component) is the largest contributor to uncertainty in changes in hydrologic cycle extremes. In this work, we develop an exact budget for changes in wet and dry extremes based on changes in the associated moist and dry intrusions behind those extremes. We decompose changes into four contributors: thermodynamic, low-level convergence, anomalous meridional moisture advection, and zonal wave activity convergence. In analyzing these changes, we show that low-level convergence is the main dynamic contributor to the tropical and subtropical annual response, consistent with weakening of the Hadley circulation, and we show that anomalous meridional moisture advection is the primary dynamic contributor annually for the extratropics, consistent with storm track changes. We achieve a clean separation between dynamic and thermodynamic contributions through an empirical scaling between extremes and their associated wave activities, showing again that shifting storm tracks and expanding subtropics are critical to the dynamic response of the transient hydrologic cycle. We infer that changes in the large-scale circulation are predominantly responsible for the annual, dynamic response of hydrologic cycle extremes and therefore an important contributor to uncertainty in future projections.
Modeling The Nucleosynthetic Imprint of Stellar Merger Phenomena - Final Technical Report
This DOE CAREER project developed a comprehensive, multi-physics framework for modeling stellar mergers and their observable consequences. The work successfully integrated analytical models, three-dimensional hydrodynamic simulations, stellar evolution calculations, nucleosynthesis, and radiation transport into a unified pipeline. Key scientific advances include demonstrating stellar mergers as a unifying explanation for systems such as Betelgeuse and R Coronae Borealis stars, quantifying merger-driven chemical signatures, and establishing the connection between merger physics and circumstellar environments. A major outcome of the project is the development of SuperLite, an open-source Monte Carlo radiation transport code that enables the generation of synthetic spectra for astrophysical transients. This work bridges dynamical, thermal, and radiative timescales and provides a powerful, DOE-relevant computational framework for interpreting observations of supernovae and related transient phenomena, while also contributing to workforce development through the training of postdoctoral researchers and graduate students.
Condensing loaded points for transients by substructuring
A technique for condensing dynamic loading points is described. The method was applied to substructure transient solutions and was found to be very effective.
Device-Level Multidimensional Thermal Dynamics With Implications for Current and Future Wide Bandgap Electronics
Researchers have been extensively studying wide-bandgap (WBG) semiconductor materials such as gallium nitride (GaN) with an aim to accomplish an improvement in size, weight, and power of power electronics beyond current devices based on silicon (Si). However, the increased operating power densities and reduced areal footprints of WBG device technologies result in significant levels of self-heating that can ultimately restrict device operation through performance degradation, reliability issues, and failure. Typically, self-heating in WBG devices is studied using a single measurement technique while operating the device under steady-state direct current measurement conditions. However, for switching applications, this steady-state thermal characterization may lose significance since the high power dissipation occurs during fast transient switching events. Therefore, it can be useful to probe the WBG devices under transient measurement conditions in order to better understand the thermal dynamics of these systems in practical applications. In this work, the transient thermal dynamics of an AlGaN/GaN high electron mobility transistor (HEMT) were studied using thermoreflectance thermal imaging and Raman thermometry. Also, the proper use of iterative pulsed measurement schemes such as thermoreflectance thermal imaging to determine the steady-state operating temperature of devices is discussed. These studies are followed with subsequent transient thermal characterization to accurately probe the self-heating from steady-state down to submicrosecond pulse conditions using both thermoreflectance thermal imaging and Raman thermometry with temporal resolutions down to 15 ns.
State-resolved ultrafast charge and spin dynamics in [Co/Pd] multilayers
We use transient absorption spectroscopy with circularly polarized x rays to detect laser-excited hole states below the Fermi level and compare their dynamics with that of unoccupied states above the Fermi level in ferromagnetic [Co/Pd] multilayers. While below the Fermi level, an instantaneous and significantly stronger demagnetization is observed, above the Fermi level, the demagnetization is delayed by 35 ± 10 fs. This provides a direct visualization of how ultrafast demagnetization proceeds via initial spin-flip scattering of laser-excited holes to the subsequent formation of spin waves.
The Aqua-Planet Experiment (APE): CONTROL SST Simulation
Climate simulations by 16 atmospheric general circulation models (AGCMs) are compared on an aqua-planet, a water-covered Earth with prescribed sea surface temperature varying only in latitude. The idealised configuration is designed to expose differences in the circulation simulated by different models. Basic features of the aqua-planet climate are characterised by comparison with Earth. The models display a wide range of behaviour. The balanced component of the tropospheric mean flow, and mid-latitude eddy covariances subject to budget constraints, vary relatively little among the models. In contrast, differences in damping in the dynamical core strongly influence transient eddy amplitudes. Historical uncertainty in modelled lower stratospheric temperatures persists in APE.Aspects of the circulation generated more directly by interactions between the resolved fluid dynamics and parameterized moist processes vary greatly. The tropical Hadley circulation forms either a single or double inter-tropical convergence zone (ITCZ) at the equator, with large variations in mean precipitation. The equatorial wave spectrum shows a wide range of precipitation intensity and propagation characteristics. Kelvin mode-like eastward propagation with remarkably constant phase speed dominates in most models. Westward propagation, less dispersive than the equatorial Rossby modes, dominates in a few models or occurs within an eastward propagating envelope in others. The mean structure of the ITCZ is related to precipitation variability, consistent with previous studies.The aqua-planet global energy balance is unknown but the models produce a surprisingly large range of top of atmosphere global net flux, dominated by differences in shortwave reflection by clouds. A number of newly developed models, not optimised for Earth climate, contribute to this. Possible reasons for differences in the optimised models are discussed.The aqua-planet configuration is intended as one component of an experimental hierarchy used to evaluate AGCMs. This comparison does suggest that the range of model behaviour could be better understood and reduced in conjunction with Earth climate simulations. Controlled experimentation is required to explore individual model behavior and investigate convergence of the aqua-planet climate with increasing resolution.
Multi-Timescale Integrated Dynamics and Scheduling for Solar (MIDAS-Solar) (Final Technical Report)
Solar photovoltaic (PV) installations have experienced unprecedented growth in the United States. PV will become not only an energy producer but also a necessary provider of ancillary services at multiple timescales. Conventional methods to simulate power systems operations - such as long-term production simulation (which typically considers schedules from hours to minutes by using an optimization framework) and short-term transient studies (which simulate dynamics from seconds to sub-seconds using state variables and differential equations) - are not sufficient for studying the multiple-timescale variation of solar generation and its impact on system reliability. Long-term system economics and short-term system dynamics are highly coupled, particularly when the penetration level of renewable generation is extremely high, because the uncertainty and variability of solar generation will impact both power system steady-state and dynamic performance. This project helps meet and exceed the U.S. Department of Energy Office of Energy Efficiency and Renewable Energy Solar Energy Technologies Office goal of systems integration by directly addressing this stability and reliability challenge for power grid planning and operation. We have developed a temporally comprehensive, closed-loop simulation model, named Multi-timescale Integrated Dynamics and Scheduling (MIDAS), that seamlessly simulates power system operations from economic scheduling (day-ahead to hours) to dynamic response analysis (seconds to sub-seconds). For schedules with very high levels of inverter-based resources (IBRs), up to and including 100%, the stability of grid controls has been evaluated through electromagnetic transient (EMT) simulations and power-hardware-in-the-loop (PHIL) simulations of key transient events at key schedule points. Specifically, MIDAS provides: 1) a closed-loop simulation framework for simulating timescales from economic scheduling to dynamic stability analysis; 2) machine learning-based stability assessment; 3) EMT modeling and analysis for large-scale power systems; 4) MIDAS PHIL test bed. We worked with Hawaii Electric Companies to apply the MIDAS study framework to a Maui grid study. The entire island's transmission system was modeled in detail - from a yearly scheduling model, to a second-level frequency dynamic model, down to a sub-second-scale EMT model to address critical stability issues. The project demonstrated how MIDAS can help system planners and operators assess system reliability and stability while the power grid is marching toward a high-renewable, high-IBR future. In this Maui grid study, we found that 100% instantaneous IBR operation is achievable in EMT simulation and PHIL testing, and grid planners and operators might need new analysis/simulation tools to assess grid reliability and stability in the scheduling stage. MIDAS will bring Maui and other systems closer to 100% clean and stable energy futures. (In this study, we examined transient stability. Other topics necessary for 100% IBR operation, such as protection and resource adequacy, were not examined.)
Ultrafast sorting: Excimeric π–π stacking distinguishes pyrene-N-methylacetamide isomers on the ultrafast time scale
Pyrene based molecules are inclined to form excimers through self-association upon photoexcitation. In this work, the pyrene core is functionalized with N-methylacetamide group at the position 1 or 2, to develop pyren-1-methylacetamide (PyMA1) and pyren-2- methylacetamide (PyMA2), respectively. The introduction of methylacetamide group was believed to help having hydrogen bonded excimers in close aggregation. Upon photoexcitation, PyMA1 and PyMA2, at 1.0mM in toluene, have formed predominantly static and dynamic excimers, respectively. The transient absorption (TA) measurements over fs-ps regime (fs-TA) showed that the formation of static excimers is an ultrafast process (~560fs) whereas, the dynamic excimers formed in much slower time scale (~65ps). Finally, single crystal X-ray diffraction studies show that for PyMA2 the overlap between the pyrene moieties (~42%) are better than PyMA1 (~17%) in ground state at 80K, which also reflected in the respective lifetimes and population percentages of excimers.
Photocarrier Dynamics in TlGaS 2 Nanoflakes and van der Waals Heterostructures with Hexagonal Boron Nitride and WS 2 Nanoflakes: Implications for Optoelectronic Applications
We present an experimental investigation on photocarrier dynamics in a TlGaS 2 bulk crystal and its heterostructures with hexagonal BN and WS 2 . The samples were obtained by mechanical exfoliation and dry transfer techniques. The photocarrier dynamics was monitored by a transient absorption technique. We observed a direct optical transition of about 555 nm in the TlGaS 2 crystal. By utilizing transient absorption of that transition, we obtained a hot-carrier energy relaxation time of less than 1 ps and a carrier lifetime of about 300 ps in TlGaS 2 at room temperature. In the hexagonal-BN-TlGaS 2 heterostructure, the photocarrier dynamics was similar to that in TlGaS 2 , indicating the type-I band alignment of this structure with both band extremes located in TlGaS 2 . In the monolayer WS 2 -TlGaS 2 heterostructure, we observed charge transfer from TlGaS 2 to WS 2 and an extended lifetime of the transferred carriers in WS 2 . Here, these results introduce TlGaS 2 as a promising layered material for developing two-dimensional van der Waals materials that can be combined with other two-dimensional materials for various optoelectronic devices.
On the numerical solution of the dynamically loaded hydrodynamic lubrication of the point contact
A numerical transient solution of the hydrodynamically lubricated point contact problem is obtained using the ball-on-plane model. Results, which include the variation of the minimum film thickness and phase-lag with time as functions of excitation frequency, are compared with the analytic solution of the transient step bearing problem with the same dynamic loading function.
Correlating armature and needle dynamics with voltage waveforms of solenoid-actuated GDI injector
The injector voltage hump that appears near the needle closing has been used for the real-time monitoring and feedback control of fuel injection duration in modern engines. This voltage hump has been thought to result from the abrupt change in electromagnetic induction by the stoppage of needle motion but detailed electromagnetic processes and associated armature and needle dynamics during the needle closing have not been thoroughly investigated in a wide range of injection conditions, which knowledge is crucial for the delicate control of fuel injection based on the voltage hump. Here, the current study analyzes the transient armature and needle dynamics of a solenoid-actuated gasoline direct injection injector using an X-ray phase-contrast imaging technique. Then, the results are correlated with voltage waveforms during the needle closing transient under various injection pressures, injection pulse durations, and dwell times of split injections. The time derivatives of voltage waveforms showed lower and upper peaks in order in the regime of the voltage hump. Inconsistent with conventional understandings, the lower peak timing of the voltage derivative did not match with the timing of needle closing (end of injection) but rather matched with the abrupt descent timing of the armature and needle. The inflection timing and upper peak timing of the voltage derivative matched with the timings of actual needle closing and armature closing respectively. The amplitude of the voltage hump was near linearly dependent on the needle closing speed. The needle closing speed decreased upon the decrease of injection pulse duration and injection pressure which made it difficult to detect the voltage humps in ballistic injection regimes and low injection pressures. In split injection conditions, the voltage hump of the first injection was not detectable if the dwell time was shorter than the needle closing delay, the time from the current cut-off to the actual needle closing.