Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “T SAS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
NASA NTRS2014

Variation in Sleep Duration and Circadian Phase by Duty Start Time Among Short-Haul Commercial Airline Pilots

Prior studies have confirmed that commercial airline pilots experience circadian phase shifts and short sleep duration following travel with layovers in different time zones. Few studies have examined the impact of early and late starts on the sleep and circadian phase of airline pilots who return to their domicile after each duty period. We recruited 44 pilots (4 female) from a short-haul commercial airline to participate in a study examining sleep and circadian phase over four duty schedules (baseline, early starts, mid-day starts, late starts). Each duty schedule was five days long, separated by three rest days. Participants completed the rosters in the same order. Sleep outcomes were estimated using wrist-borne actigraphy (Actiware Software, Respironics, Bend, OR) and daily sleep diaries. Thirteen participants volunteered to collect urine samples for the assessment of 6-sulfatoxymelatonin (aMT6s). Urine samples were collected in four hourly bins during the day and eight-hourly bins during sleep episodes, for 24 hours immediately following each experimental duty schedule. The aMT6s results were fit to a cosine in order to obtain the acrophase to estimate circadian phase. Univariate statistics were calculated for acrophase changes, schedule start times and sleep times. All statistical analyses were computed using SAS software (Cary, IN).The mean duty start times varied as expected (baseline 10:17 [ 3:50], early starts 5:24 [ 0:30], mid-day starts 13:52 [ 1:20], late starts 16:33 [ 1:33]). Actigraphy-derived sleep duration varied between schedule types, with the shortest average sleep durations occurring during the early starts and night duty. Mean circadian phase was similar during each schedule type (baseline 26:14 [ 3:22], early starts 25:29 [2:13], mid-day starts 26:20 [ 3:16], late starts 25:49 [ 4:28]), but there were wide inter-individual differences in phase shifting from the beginning to the end of the study, with phase shifts ranging from a 5.98 hour phase advance to an 11.34 hour phase delay. Our preliminary findings suggest that early and late starts are associated with reduced sleep duration. The dispersion in inter-individual differences in circadian phase across shifting duty schedules should be further evaluated to determine how schedule-induced phase shifts may affect operational performance.

Flynn-Evans, Erin↗
NASA NTRS2016

Solar Array (Radiated/Non-Radiated): Materials Characterization and Cryogenic Thermal Cycling Qualification for the Planned Europa Clipper Mission (ECM)

Two special instruments were custom built for our critical study and manufactured and employed to test the SA materials of interest to cryogenic temperature conditions. We have procured custom manufactured two independent systems such as Thermo -Mechanical Analyzer (TMA) with Three Point Bend Probe (TPBP) module and Dilatometer. TMA can be used to measure Young’ s modulus or elastic modulus (e -modulus). Dilatometer can be used to measure Co -efficient of Thermal Expansion (CTE). We have optimized the materials configuration to measure physical properties of radiated and non -radiated materials for CTE and e -modulus, which will be useful to assess materials and processes reliability for cryogenic temperature applications. We have successfully implemented for some materials that are of interest to solar panels for the planned ECM project to measure CTE and Young's modulus. Also a separate study was undertaken to thermal cycle qualify SAs for ECM project. One can do thermal cycling to temperatures of 50 K and 133 K using liquid Helium (Lq He). This is in reality exorbitantly too expensive and is also inefficient. Furthermore, this is not technically controllable test to 133 K and 50 K temperatures. This is also too expensive to accomplish. Therefore, a vacuum set -up was made along with a cryostat successfully. This is a closed loop system where we do not lose the Helium gas. We were able to get to 35 K for a given test coupon size. These temperatures are lower than what we would intend to qualify the solar array technologies. This will allow to have some margin at cold temperatures. We successfully completed the qualification of solar array technologies down to 50 K temperatures. This is the first time we are reporting this accomplishment. In this paper, we will present the solar array materials properties for cryogenic temperatures down to 20 K temperatures and the thermal cycling qualification test results from 133 K to 50 K for three times the mission life of 120 thermal cycles to meet JPL Design.

Ramesham, Rajeshuni↗
NASA NTRSDate not supplied

The Comet Astrobiology Exploration Sample Return (CAESAR) Mission

The Comet Astrobiology Exploration Sample Return (CAESAR) mission will acquire and return to Earth for laboratory analysis a minimum of 80 grams of surface material from the nucleus of comet 67P/Chur-yumov-Gerasimenko (67P). CAESAR will characterize the surface region sampled, preserve the collected sample in a pristine state, and return evolved volatiles by capturing them in a separate gas reservoir. NASA Goddard Space Flight Center provides project management, systems engineering, safety and mission assurance, contamination control, mission operations, and many other important functions. Northrop Grumman Space Systems will build the spacecraft, based on Dawn mission heritage, which like CAESAR, uses solar electric propulsion. CAESAR was selected by for Phase A study in the New Frontiers 4 Competition and will be proposed to New Frontiers 5.Collection of a sample from the surface of comet 67P is facilitated by a set of cameras that together provide images to support sample site selection, perform optical navigation, and document the sample before, during, and after col-lection. The sample is collected at the end of an arm during a 5-second touch-and-go (TAG) maneuver with the Sample Acquisition System (SAS)designed by Honeybee Robotics for the surface properties of comet 67P observed by the Rosetta mission. After sample collection, and while the sample is still cold (< -80°C), the TAG Arm inserts the sample container into the Sample Containment System (SCS) mounted inside the Sample Return Capsule (SRC). The SCS is sealed, preventing the sample from escaping into space. The sample is slowly warmed inside the SCS to enable sublimation of volatiles, which are collected in the Gas Containment System (GCS), a passively cooled gas reservoir. Separating the volatiles from the solid sample protects the solid sample from alteration. Once all sublimated H2O is transferred to the GCS, the GCS is sealed to capture the volatile sit contains, and the SCS is vented to space to maintain the solid sample under vacuum. The SCS vent is closed before Earth entry to prevent atmospheric contamination. Detailed laboratory analyses of the sample from 67P will trace the history of volatile reservoirs, delineate the chemical pathways that led from simple interstellar species to complex molecules, constrain the evolution of the comet, and evaluate the role of comets in delivering water and prebiotic organics to the early Earth. CAESAR will achieve these goals by carrying out coordinated sample analyses that will link macroscopic properties of the comet with microscale mineralogy, chemistry, and isotopic studies of volatiles and solids. Most of the sample (≥75%) will be set aside for analyses by generations of scientists using continually advancing tools and methods, yielding an enduring scientific treasure that only sample return can provide. This presentation will review development conducted during NF4 Phase A and discuss the NF5 mission concept.

A G Hayes↗
NASA NTRSDate not supplied

The Effects of Chronic Sleep Restriction on Calorie and Macronutrient Intake

Introduction: Chronic sleep restriction (CSR) has been associated with increased calorie intake and increased consumption of fats and carbohydrates, with inconsistent changes in protein. However, the majority of studies have either been observational field studies with no sleep intervention, or laboratory-based studies where food availability may not have reflected participants’ real-world choices. We hypothesized that calorie, fat, and carbohydrate intake would increase during a week of imposed CSR compared to a week of sleep satiation (SS) among individuals living in their home environment. Methods: Twelve healthy participants (6 females) kept a fixed sleep-wake schedule, with a constant waketime, at home for four weeks (actigraphy confirmed compliance). During weeks one and three, participants maintained 9 hours in bed. During weeks two and four, participants were randomly assigned to experimental weeks of 5 and 9 hours of time-in-bed in a crossover design. Participants documented their food consumption during both experimental weeks using a picture-based meal logging application (MealLogger). Intake of calories and macronutrients were classified by two blinded evaluators. Descriptive statistics were calculated in SAS (Cary, NC). Results: Participants averaged 4.43 ± 0.33 (SD) hours of sleep per night during CSR compared to 7.42 ± 0.42 hours during SS. Participants consumed a daily average of 1812 ± 672 kilocalories, 71 ± 31 grams of total fat, 217 ± 69 grams of carbohydrates, and 84 ± 40 grams of protein during CSR, compared to 1682 ± 514 kilocalories, 68 ± 23 grams of total fat, 198 ± 61 grams of carbohydrates, and 77 ± 32 grams of protein during SS. Conclusion: Preliminary descriptive findings suggest that, on average, participants consumed more calories, from an increase in consumption of each macronutrient group, during a week of sleep restriction compared to a week of sleep satiation. Further analysis is needed to determine whether these differences are statistically different and to identify when calories were consumed in each of the experimental conditions.

chronic sleep restriction↗
DOE OSTI2024

Fuel Performance Evaluation of THOR-C Experiments

The Temperature Heatsink Overpower Response Commissioning (THOR-C) and THOR-Metal (THOR-M) experiments will be performed as part of an ongoing project for testing sodium fast reactor fuels with the Japan Atomic Energy Agency (JAEA). The THOR-C experiments consist of fresh metallic fuel pins and have been analyzed using the ABAQUS, Ansys codes and the BISON fuel performance code. THOR-M-Loss of Flow-1 (THOR-M-LOF-1) is designed to test an EBR-II irradiated fuel pin under LOF conditions. Simulation of the THOR-MLOF-1 experiment required first simulating the base irradiation of the fuel pin in EBR-II. MFUEL module of SAS4A/SASSYS-1 [1] is a physics-based metallic fuel performance model applicable to the normal operation, transient scenarios and fuel failure modeling including scenarios with bulk fuel melting. The model has been validated using EBR-II normal operation, separate effect transient tests as well as TREAT M-Series transient tests [2]. In this study, MFUEL models has been utilized together with a new capsule heat transfer model developed in this project. The new heat transfer model was necessary due to (1) significant amount of heat losses that required 2D heat transfer, (2) the presence of a titanium heat sink, rejecting a significant amount of heat, and (3) stagnant coolant conditions, which are inconsistent with SAS4A/SASSYS-1 (SAS) heat transfer model. Updates to SAS4A/SASSYS-1 and MFUEL has been described below, followed by a preliminary validation effort using the results from THOR-C-2 fresh fuel capsule experiment. A previous study for THOR-C-2 analysis using BISON code is also utilized in this study to model this test [3]. [1] D. O’Grady, A. J. Brunett, L. Ibarra, A. Karahan, T. Kim, T. S. Sumner, R. Thomas, T. H. Fanning, “The SAS4A/SASSYS-2 Version 5.7 Safety Analysis Code System,” Argonne National Laboratory,ANL/NSE-SAS/5.7, (2023). [2] A. Karahan, T. Kim, T. Fanning, D. O’Grady, “Validation of MFUEL Metal Fuel Performance Models of SAS4A/SASSYS-1,” Argonne National Laboratory, ANL/NSE-23/11, (2023). [3] M. Mihelish, A. Zabriskie, K. Paaren, P. Medvedev, C. Jensen, “Fuel Performance Predictions for the TREAT THOR-C Experiments,” Idaho National Laboratory, INL/RPT-23-73397, Revision 0, (2023)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2026

Interlayer coupling in two-dimensional MoS 2 and phosphorene bilayers: Benchmark quantum Monte Carlo study of interaction energies and quasiparticle band gaps

Using high-accuracy many-body quantum Monte Carlo (QMC) methods, we study the effect of interlayer coupling on the properties of two-dimensional freestanding bilayers (BLs) of MoS 2 and phosphorene. The properties of the two BL-materials are very different and largely determined by the interlayer interaction, which is purely van der Waals in MoS 2 and partially electronic/chemical in phosphorene, resulting in a modest layer-dependent property modulation in MoS 2 and strong modulation in phosphorene. Multireference and symmetry considerations are used to construct state-of-the-art accuracy QMC trial wave functions. We determine the quasiparticle band gaps for both materials, $Δ^{\textrm{qp}}_{Γ→\textrm{K}}$ = 2.45 ± 0.05 eV in BL-MoS 2 and $Δ^{\textrm{qp}}_{Γ→Γ}$=1.59 ±0.1eV in BL-phosphorene. In conclusion, these benchmark band-gap values make it possible to consolidate the interpretation of the widely scattered experimental and theory data.

Huang, Yongda [Slovak Academy of Sciences (SAS), B↗
DOE OSTI2025

Influence of calcium nitrate timing on the structural and textural characteristics of mesoporous SiO 2 -CaO nanoparticles

Mesoporous bioactive glass nanoparticles (MBGNPs) are promising materials for drug delivery due to their high pore volume and specific surface area. This study investigates how the timing of calcium nitrate addition affects the structural and textural characteristics of MBGNPs synthesized via a microemulsion-assisted sol-gel method. Delayed calcium nitrate addition reduced calcium incorporation from 14.2 to 9.5 mol% and increased particle size from 178 ± 51 nm to 256 ± 30 nm. The specific surface area values increased with the delayed addition of calcium nitrate, as observed through BET and USAXS/SAXS measurements. The proportion of Q Si n units slightly changed, but no cytotoxicity was observed in osteoblast-like cells. These findings provide valuable insights into optimizing MBGNP synthesis for biomedical applications.

Calcium nitrate tetrahydrate↗
DOE OSTI2025

Tailoring coherent beam combined laser pulse trains for high peak and average power applications

Laser systems based on coherent beam combination (CBC) that rely on tiled pupil architecture intrinsically carry digital capabilities independently applicable to all three essential characteristics of a laser pulse: amplitude, phase and polarization. Those capabilities allow the far-field energy distribution to be flexibly tailored in real time. Operation in the femtosecond regime at high repetition rates gives access to a wide range of applications requiring both high peak and average powers. We address the task of independent peak versus average power adjustment needed for applications seeking to decouple nonlinear phenomena associated with GW peak power from the thermal load inherent to kW average power operation. The technical solutions proposed are presented in the framework of the Ecole Polytechnique XCAN CBC laser platform (61 independent channels) with an emphasis on thermal management measures implemented to ensure its nominal operation.

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

Operando TEM study of a working copper catalyst during ethylene oxidation

Active catalysts are typically metastable, and their surface state depends on the gas-phase chemical potential and reaction kinetics. To gain relevant insights into structure-performance relationships, it is essential to investigate catalysts under their operational conditions. Here, we use operando TEM combining real-time observations with online mass spectrometry (MS) to study a Cu catalyst during ethylene oxidation. We identify three distinct regimes characterized by varying structures and states that show different selectivities with temperature, and elucidate the reaction pathways with the aid of theoretical calculations. Our findings reveal that quasi-static Cu 2 O at low temperatures is selective towards ethylene oxide (EO) and acetaldehyde (AcH) via an oxometallacycle (OMC) pathway. In the dynamic Cu 0 /Cu 2 O oscillation regime at medium temperatures, partially reduced and strained oxides decrease the activation energies associated with partial oxidation. At high temperatures, the catalyst is predominantly Cu 0 , partially covered by a monolayer Cu 2 O. While Cu 0 is extremely efficient in dehydrogenation and eventual combustion, the monolayer oxide favors direct EO formation. These results challenge conclusions drawn from ultra-high vacuum studies that suggested metallic copper would be a selective epoxidation catalyst and highlight the need for operando study under realistic conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Dynamic RNA acetylation revealed by quantitative cross-evolutionary mapping

N 4 -acetylcytidine (ac 4 C) is an ancient and highly conserved RNA modification that is present on tRNA and rRNA and has recently been investigated in eukaryotic mRNA. However, the distribution, dynamics and functions of cytidine acetylation have yet to be fully elucidated. In this work, we report ac 4 C-seq, a chemical genomic method for the transcriptome-wide quantitative mapping of ac 4 C at single-nucleotide resolution. In human and yeast mRNAs, ac 4 C sites are not detected but can be induced—at a conserved sequence motif—via the ectopic overexpression of eukaryotic acetyltransferase complexes. By contrast, cross-evolutionary profiling revealed unprecedented levels of ac 4 C across hundreds of residues in rRNA, tRNA, non-coding RNA and mRNA from hyperthermophilic archaea. Ac 4 C is markedly induced in response to increases in temperature, and acetyltransferase-deficient archaeal strains exhibit temperature-dependent growth defects. Visualization of wild-type and acetyltransferase-deficient archaeal ribosomes by cryo-electron microscopy provided structural insights into the temperature-dependent distribution of ac 4 C and its potential thermoadaptive role. Our studies quantitatively define the ac 4 C landscape, providing a technical and conceptual foundation for elucidating the role of this modification in biology and disease.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Arsenic stress triggers active exudation of arsenic–phytochelatin complexes from Lupinus albus roots

Abstract Arsenic (As) contamination of soils threatens the health of millions globally through accumulation in crops. While plants detoxify As via phytochelatin (PC) complexation and efflux of arsenite from roots, arsenite efflux mechanisms are not fully understood. Here, white lupin (Lupinus albus) was grown in semi-hydroponics, and exudation of glutathione (GSH) derivatives and PCs in response to As was measured using LC-MS/MS. Inhibiting synthesis of the PC precursor GSH with l-buthionine sulfoximine (BSO) or ABC transporters with vanadate drastically reduced (>22%) GSH derivative and PC2 exudation, but not PC3 exudation. This was accompanied by As hypersensitivity in plants treated with BSO and moderate sensitivity with vanadate treatment. Investigating As–PC complexation revealed two distinct As–PC complexes, As bound to GSH and PC2 (GS–As–PC2) and As bound to PC3 (As–PC3), in exudates of As-treated lupin plants. Vanadate inhibited As–PC exudation, while BSO inhibited both the synthesis and exudation of As–PC complexes. These results demonstrate a role for GSH derivatives and PC exudation in lupin As tolerance and reveal As–PC exudation as a new potential mechanism contributing to active As efflux in plants. Overall, this study uncovers insights into rhizosphere As detoxification with potential to help mitigate pollution and reduce As accumulation in crops.

Plant Sciences↗
DOE OSTI2026

Dynamical correlations and nonequilibrium sum rules in photodoped Hubbard ladders

Using matrix product state techniques we study the nonequilibrium dynamical response of the half-filled Hubbard ladder when subject to an optical pump. Optical pumping offers a way of producing and manipulating new strongly correlated phenomena by suppressing existing magnetic correlations. The ladder allows the effects of pump directionality to be investigated, and compared to a single chain it has strong spin-charge coupling and a fully gapped excitation spectrum, promising different nonequilibrium physics. We compute time-dependent correlations, including the nonequilibrium dynamical structure factors for spin and charge. By deriving a combined spin-charge sum rule that applies both in and out-of-equilibrium, we show that spectral weight is pumped directly from the antiferromagnetic spin response into a low energy 𝜔 ∼ 0 charge response below the Mott gap. The transfer of weight is pump direction dependent: pumping directed along the legs disrupts magnetic correlations more than pumping in the rung-direction, even if the post-pump energy density is similar. The charge correlation length is dramatically enhanced by the pump, whilst the spin correlations are most strongly suppressed at nearest- and next-nearest-neighbor spacings. After the pump the system is in a nonthermal correlated metallic state, with gapless charge excitations and approximately equal spin and charge correlation lengths, emphasizing the importance of treating these degrees of freedom on an equal footing in nonequilibrium systems.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Atomic structure and formation mechanism of a newly discovered charge density wave in the m = 2 monophosphate tungsten bronze

The m = 2 member of the monophosphate tungsten bronze family had been thought to be the only one without an electronic instability at low temperature. In this paper, we report the discovery of a charge density wave phase in this compound, with a transition temperature of 290 K and an incommensurate modulation vector q = 0.245b* + ξc*, which reaches a lock-in with a commensurate vector at 130 K. The presence of this new phase is confirmed by diffraction and resistivity measurements. Pre-transitional dynamics are investigated using diffuse and inelastic X-ray scattering, revealing a clear Kohn anomaly. We analyze both structural and electronic contributions to the phase transition, providing a comprehensive picture of the mechanism driving this newly identified instability.

Minelli, Arianna [ORNL] (ORCID:0000000283103712)↗
DOE OSTI2025

Untargeted metabolomics reveals anion and organ‐specific metabolic responses of salinity tolerance in willow

SUMMARY Willows can alleviate soil salinisation while generating sustainable feedstock for biorefinery, yet the metabolomic adaptations underlying their tolerance remain poorly understood.Salix miyabeanawas treated with two environmentally abundant salts, NaCl and Na 2 SO 4 , in a 12‐week pot trial. Willows tolerated salts across all treatments (up to 9.1 dS m −1 soil EC e ), maintaining biomass while selectively partitioning ions, confining Na + to roots and accumulating Cl − and in the canopy and adapting to osmotic stress via reduced stomatal conductance. Untargeted metabolomics captured >5000 putative compounds, including 278 core willow metabolome compounds constitutively produced across organs. Across all treatments, salinity drove widespread metabolic reprogramming, altering 28% of the overall metabolome, with organ‐tailored strategies. Comparing salt forms at equimolar sodium, shared differentially abundant metabolites were limited to 3% of the metabolome, representing the generalised salinity response, predominantly in roots. Anion‐specific metabolomic responses were extensive. NaCl reduced carbohydrates and tricarboxylic acid cycle intermediates, suggesting potential carbon and energy resource pressure, and accumulated root structuring compounds, antioxidant flavonoids, and fatty acids. Na 2 SO 4 salinity triggered accumulation of sulphur‐containing larger peptides, suggesting excess sulphate incorporation leverages ion toxicity to produce specialised salt‐tolerance‐associated metabolites. This high‐depth picture of the willow metabolome underscores the importance of capturing plant adaptations to salt stress at organ scale and considering ion‐specific contributions to soil salinity.

Plant Sciences↗
DOE OSTI2023

Progress on an Electron Beam Profile Monitor at the Fermilab Main Injector

The current program at Fermilab involves the construction of a new superconducting linear accelerator (LINAC) to replace the existing warm version. The new LINAC, together with other planned improvements, is in support of proton beam intensities in the Main Injector (MI) that will exceed 2 MW. Measuring the transverse profiles of these high intensity beams in a ring requires non-invasive techniques. The MI uses ionization profile monitors as its only profile system. An alternative technique involves measuring the deflection of a probe beam of electrons with a trajectory perpendicular to the proton beam. This type of device was installed in MI and initial studies of it have been previously presented. This paper will present the status and recent studies of the device utilizing different techniques.

43 PARTICLE ACCELERATORS↗