Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Solar corona”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Imaging performance of multilayer X-ray mirrors

We analyze soft X-ray images of the solar corona, obtained on the day of the solar eclipse in July 1991, and find that the deviations of our telescope mirror from the perfect surface are less than 1 A for spatial periods between 1 micron and 1 mm. Our thin film deposition technique allows us to reduce errors over larger periods to the 1 A level. Thus, we are able to produce larger (diameter over 20 cm) X-ray mirrors with diffraction limited resolution below 0.01 arcsec.

Spiller, Eberhard↗

Calibration of the NEAR XRS Solar Monitor

The NEAR-Shoemaker X-ray spectrometer measured elemental abundance ratios for six elements (Mg, Al, Si, S, Ca, Fe) on the surface of 433 Eros by remote-sensing x-ray fluorescence spectroscopy (1,2). The fluorescent x-rays are excited by x-rays from the solar corona. Therefore, accurate knowledge of the incident solar spectrum was critically important to interpreting the fluorescence spectra received by the NEAR detectors in terms of elemental ratios on the asteroid's surface. NEAR, therefore, carried two additional X-ray spectrometers dedicated to monitoring the solar spectrum between 1 and 10 keV. One of these, a Si PIN photodiode, failed prior to orbit insertion. The second consisted of a gas-filled proportional counter similar to the asteroid-pointing detectors, but covered by a graded filter (3) intended to attenuate the incoming solar flux and increase the dynamic range of the detector. Unfortunately, the response of this filter as a function of solar incidence angle was not adequately determined in the laboratory prior to launch. The response function had to be calculated from the assumed properties of the graded filter.

Lim, L. F.↗

Large-scale structure of the sun's corona from radio observations using the Clark Lake Radioheliograph

Meterwave maps of the solar corona made with the Clark Lake Radioheliograph at 30.9, 50, and 73.8 MHz for one solar rotation are presented. They are compared and contrasted with optical data: 10,830 A maps, white-light coronagraph images (SOLWIND and Mauna Loa K coronameter), and forbidden line scans. Most of the sources in the radio maps persist for two days or more, and appear to rotate approximately with the solar rate. A coronal hole seen against the disk at all three frequencies shows interesting similarities and significant differences with the optical signatures of the hole. Elongated features of the 50 MHz corona correspond rather well to the azimuthal position of white light streamers seen in SOLWIND images. Synoptic charts made from the radio maps show overall similarities to synoptic charts constructed from (limb) coronagraph data. Some of the differences may result from the different weightings given by the radio and optical data to density and temperature, or by the different sensitivities to nonradial geometries. It is shown that the combined use of meter wave and optical images provides considerable new insights into the three-dimensional structure of the low to middle corona.

Kundu, M. R.↗

Magnetic reconnection and thermal equilibration

When a magnetic field is forced to evolve on a time scale sev, as by footpoint motions driving the solar corona or non-axisymmetric instabilities in tokamaks, the magnetic field lines undergo large-scale changes in topology on a time scale approximately an order of magnitude longer than $\tau$ ev . But the physics that allows such changes operates on a time scale eight or more orders of magnitude slower. An analogous phenomenon occurs in air. Temperature equilibration occurs on a time scale approximately an order of magnitude longer than it takes air to cross a room, $\tau$ ev , although the physical mechanism that allows temperature equilibration is approximately four orders of magnitude slower than $\tau$ ev . The use of Lagrangian coordinates allows the fundamental equations to be solved and both phenomena explained. The theories of thermal equilibration and magnetic reconnection are developed in parallel to help readers obtain an understanding of the importance and implications of analyses using Lagrangian coordinates.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Coronal magnetic field diagnostics via the Hanle effect of Lyman series lines

The magnetic field plays a major role in the physics of the solar corona. However, there are no direct measurements of this physical parameter. We describe a method that can provide the most direct determination of the vector magnetic field in the extended corona (i.e., at heliocentric heights between 1.2 R(solar radius) and 2.0 R(solar radius)). The method is based on polarimetric observations of UV lines of the Lyman series, that is, Lyman alpha (Ly-alpha), lambda 1216 A, Lyman beta (Ly-beta), lambda 1025 A, and Lyman gamma (Ly-gamma), lambda 972 A. These lines have a collisional and a resonantly scattered component. Linear polarization is induced in the resonant component by the anisotropy in the chromospheric radiation field that illuminates the corona. Magnetic fields can be suitably determined through the effects that they induce on this resonance polarization (Hanle effect). The Hanle effect of the Ly-alpha is sensitive to field strengths in the 10 - 100 gauss range. The resonance polarization of Ly-beta and Ly-gamma is sensitive, through the Hanle effect, to fields with strengths between 3 - 30 gauss, and 0.3 - 6 gauss, respectively. We describe a new method for separating the resonant from the collisional component of the Ly-beta and Ly-gamma; the method is based on the approximation, valid within 10%, that the collisional component of the Ly-alpha is negligible, in typical coronal conditions. From the intensity and the polarization of the resonant components of these Lyman lines, the strength and direction of coronal fields can be determined. We model the sensitivity of Hanle-effect diagnostics for different coronal structures (e.g., coronal holes and loops).

Fineschi, S.↗

Nanoflare Heating Frequency of an X-ray Bright Point Observed by MaGIXS

Nanoflares have been considered to be one of the most likely candidates for heating the solar corona to multi-million kelvin temperatures. Individual nanoflares are difficult to detect with today's instruments, but their presence may be established by comparing simulated nanoflare-heated plasma emissions to observed emissions. We present a simulation of emission from an X-ray Bright Point (XBP) detected by the MaGIXS, as well as simultaneous observations from SDO/AIA and Hinode/XRT. To simulate the XBP loops, we utilize the HYDRAD code. The length and magnetic field strength of these loops are determined using potential field extrapolation of SDO/HMI's observed photospheric magnetogram. Each loop is considered to be heated by random nanoflares, the amplitude and frequency of which are governed by the length of the loop and the strength of the magnetic field. The simulated outputs are used to estimate the intensity of spectrally pure maps of Fe-18, Fe-17, Ne-9, O-8, O-9, Ne-9, and so on, which is then compared to the intensity determined from MaGIXS observations. In addition, we derived the intensity maps obtained by AIA and XRT and compared them to the observed data. The composite distribution of the delay time of the nanoflares for which the simulated loops morphology and intensities match with observation shows a peak at 200s-500s, indicating that most of the nanoflares have a high/intermediate frequency.

coronal heating↗

Plasma and space physics

Continuum plasma dynamics, and properties of corona, solar wind, magnetosphere, and transition region

SOLAR WIND↗

Shock waves in the solar system.

Review of the role of gasdynamic processes involving shock waves in the transfer of solar material and energy to the earth and elsewhere in the solar system. The role of shock waves in maintaining the high temperature of the solar corona and in establishing the steady-state solar wind is discussed. An approximate hydromagnetic theory is developed to explain the flow of a supersonic solar wind past planets and the moon. Data concerning the passage of interplanetary shock waves and the ability of a solar flare to produce such a wave are reviewed, and some terrestrial consequences of solar activity are cited.

Spreiter, J. R.↗

The Third Solar Wind Conference: A summary

The Third Solar Wind Conference consisted of nine sessions. The following subjects were discussed: (1) solar abundances; (2) the history and evolution of the solar wind; (3) the structure and dynamics of the solar corona; (4) macroscopic and microscopic properties of the solar wind; (5) cosmic rays as a probe of the solar wind; (6) the structure and dynamics of the solar wind; (7) spatial gradients; (8) stellar winds; and (9) interactions with objects in the solar wind. The invited and contributed talks presented at the conference are summarized.

Russell, C. T.↗

Coronae of nondegenerate single and binary stars: A survey of our present understanding and problems ripe for solution

Information about the coronae of stars in different portions of the HR diagram, and how the characteristics of such coronae compare with what is known about the solar corona are reviewed. For each type of star, some unanswered questions and the generic type of X-ray instrument required to answer these questions are listed. The survey points out the critical need for a sensitive X-ray instrument with both moderate spectra resolution and imaging capability that can monitor selected targets for long periods of time. There is also a need for high spectral resolution, provided sensitivities can be improved greatly over Einstein, and near simultaneous ultraviolet spectroscopy.

Linsky, J. L.↗

Three-Dimensional Coronal Density Structure: 1. Model

The three-dimensional (3-D) density structure of the solar corona is a fundamental boundary condition on the solar wind. Most easily applied models of the global coronal density have been restricted to date to axisymmetric 2-D cases. We present here a 3-D model made up of a superposition of multiple streamers, having distinct gaussian widths in longitude and latitude and both longitudinal and latitudinal dependence of the neutral lines implicit beneath the streamer cores. Nonradiality of streamers and solar B-angle tilt are also explicitly treated. We show how this simple model can capture many of the general properties of coronal white light observations and demonstrate how such a model can assist in the interpretation of the multiple views on coronal structures such as will be provided by the upcoming STEREO mission.

Gibson, S. E.↗

Space Weather Investigation Frontier (SWIFT)

The Space Weather Investigation Frontier (SWIFT) mission will aim at making major discoveries on the three-dimensional structure and dynamics of heliospheric structures that drive space weather. The focus will be on Interplanetary Coronal Mass Ejections (ICMEs) that originate from massive expulsions of plasma and magnetic flux from the solar corona. They cause the largest geomagnetic storms and solar energetic particle events, threatening to endanger life and disrupt technology on Earth and in space. A big current problem, both regarding fundamental solar-terrestrial physics and space weather, is that we do not yet understand spatial characteristics and temporal evolution of ICMEs and that the existing remote-sensing and in-situ observatories are not suited for resolving multi-layered and evolutionary structures in these massive storm drivers. Here, we propose a groundbreaking mission concept study using solar sail technology that, for the first time, will make continuous, in-situ multi-point observations along the Sun-Earth line beyond the Lagrange point L1 (sub-L1). This unique position, in combination with L1 assets, will allow distinguishing between local and global processes, spatial characteristics, temporal evolution, and particle energization mechanisms related to ICMEs. In addition, measurements of the magnetic field in earthbound ICMEs and their sub-structures from the SWIFT location will double the current forecasting lead-times from L1. This concept also paves the way for missions with increasingly longer forecasting lead-times, addressing NASA and NOAA’s space weather goals, as set forth by the Decadal Survey. The objective of this communication is to inform the community of the ongoing effort, including plans to further develop the mission concept, supported by the Heliophysics Flight Opportunities Studies (HFOS) program under NASA’s Research Opportunities in Space and Earth Sciences (ROSES).

M. Akhavan-Tafti↗

Type III radio bursts in a fibrous corona

It is shown that the effects of density variations in the solar corona may be comparable to or greater than other effects in producing the time and frequency profiles of Type III bursts. A quantitative treatment of the density inhomogeneity effect is presented and a simple mathematical theory that incorporates a log-normal distribution for density variations in nonradial diverging flux tubes is presented. This theory successfully simulates dynamic spectrograms of Type III bursts from 50 to 400 MHz.

Roelof, E. C.↗

The X-ray corona and the photospheric magnetic field.

Soft X-ray photographs of the solar corona have been obtained on four flights of a rocket-borne grazing incidence telescope having a resolution of a few arc sec. The configuration of the X-ray emitting structures in the corona has been compared to the magnetic field distribution measured by photospheric longitudinal magnetograms. The X-ray structures trace the three-dimensional configuration of the magnetic field through the lower corona. Active regions in the corona take the form of tubular structures connecting regions of opposite magnetic polarity within the same or adjacent chromospheric active regions. Higher, larger structures link widely separated active regions into complexes of activity covering substantial fractions of the disk. The complexes are separated by areas of low average field in the photosphere. Interconnections across the solar equator appear to originate over areas of preceding polarity.

Krieger, A. S.↗

Ulysses Solar Wind Plasma Observations at High Southerly Latitudes

The solar wind is an ionized gas flowing from the solar corona and consisting primarily of free electrons, protons, and doubly-ionized helium. Ulysses solar wind plasma observations through -80.2 degrees solar latitude and continuing equatorward to -40.1 degrees are summarized. Recurrent high-speed streams and corotating interaction regions dominate at mid latitudes. Observation and analysis is given.

Ulysses↗

The Sun and the Solar Wind Close to the Sun

The structure of the solar corona is directly reflected in the structure of the solar wind. But, the importance of this simple observation to coronal modeling has become much greater with the arrival of results from Ulysses and SOHO. High speed wind is relatively smooth and uniform (Ulysses) but the coronal holes from which it comes contain highly filamented flows that expand in area by factors of two to sevenfold between the solar surface and 10 solar radii (SOHO). Different models of the relationship between solar and interplanetary magnetic fields produce similar predictions and are still being reconciled. Slow wind seems to come from the boundaries of streamers (Ulysses) by a process which is even less well understood. Again, there are different ideas for the leakage of slow wind from streamers but these models are quickly becoming highly constrained by new data on composition in the core and boundaries of streamers (SOHO). Perhaps the most significant conclusion is that there is a changing paradigm for the processes governing solar wind acceleration and energy flow, one that requires the presence of filamented, energetic, transient flows in a low-beta plasma close to the Sun that become mixed to produce the evolving turbulent MHD plasma that Is observed in the interplanetary medium.

Suess, S. T.↗

Solar Power System Design for the Solar Probe+ Mission

Solar Probe+ is an ambitious mission proposed to the solar corona, designed to make a perihelion approach of 9 solar radii from the surface of the sun. The high temperature, high solar flux environment makes this mission a significant challenge for power system design. This paper summarizes the power system conceptual design for the solar probe mission. Power supplies considered included nuclear, solar thermoelectric generation, solar dynamic generation using Stirling engines, and solar photovoltaic generation. The solar probe mission ranges from a starting distance from the sun of 1 AU, to a minimum distance of about 9.5 solar radii, or 0.044 AU, from the center of the sun. During the mission, the solar intensity ranges from one to about 510 times AM0. This requires power systems that can operate over nearly three orders of magnitude of incident intensity.

Landis, Geoffrey A.↗