Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Smoothing methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
NASA NTRS2000

An Assessment of Our Ability to Model the Upper Troposphere and Lower Stratosphere in Interactive Climate Models

The physics of the upper troposphere is dominated by the different phases of water, while the lower stratosphere is governed by the presence of ozone. The tropopause may be regarded as the layer which separates the regions where stratospheric and tropospheric processes dominate the physics, but it is clearly not a smooth transition level. Modelling this region in comprehensive climate models is complicated, partly because of the constraints inherent in numerical methods (such as the finite resolution used in models) and partly because of our incomplete knowledge of the physical and chemical interactions which occur (such as the phase transitions of water and the composition of aerosols). However, studies of stratospheric impacts on climate change clearly require the tropopause region to be modelled with a high degree of accuracy. This paper will examine how well we can currently model the structure and dynamics of the tropopause region; this includes some comparisons of the simulated atmospheric composition with observational estimates of these species, some studies of discrepancies between forecasts and observations in the Data Assimilation System of the Data Assimilation office, and inferences for sparsely observed quantities. The analysis will focus on meteorological quantities, physical forcing mechanisms, and the transport and interactions of trace species.

Pawson, Steven↗
NASA NTRSDate not supplied

Saccade-Pursuit Coordination during Ocular Tracking across Different Impairment Sources

Purpose: Sleep loss and alcohol have been shown to impair smooth pursuit and its underlying visual motion processing in humans. This study examines the saccadic compensation for this poor pursuit. Methods: Using an established behavioral ocular-tracking paradigm (Liston & Stone, 2014, doi:10.1167/14.14.12), we examined the dose-response of ground lost (pursuit deficit integrated across our 300-ms steady-state tracking interval) and ground gained (increased saccadic response harnessed to compensate)across three separate studies – acute low-dose alcohol administration (LDA; n = 16 subjects), acute sleep loss(ASL; n = 12), and chronic sleep restriction (CSR; n = 12). We computed dose-responses as the linear regression slopes of ground lost and gained across treatment dose (% blood alcohol concentration [BAC] or hours awake). For the CSR study, we computed the mean effect for a single dose (5-hours nightly sleep for 1week). Results: For LDA, there was significantly increased ground lost (P < 0.001) and gained (P < 0.001) with increased %BAC. In addition, the dose-responses were not significantly different (P = 0.35), indicating effectively complete saccadic compensation due to significant increases in both saccadic rate (P < 0.05) and amplitude (P < 0.001). For ASL, there was significantly increased ground lost with time awake (P < 0.01),however ground gained was significantly lower (P < 0.001), indicating, at best, incomplete compensation due to a significant increase in saccadic rate (P < 0.001) but not amplitude (P = 0.10). With CSR, pursuit was again significantly impaired (P < 0.05), with saccadic rate significantly increased (P < 0.05) but, surprisingly, amplitude was significantly decreased (P < 0.05), effectively eliminating ground gained (P = 0.90). Conclusions: Our analyses show that LDA, ASL, and CSR affect tracking differently, suggesting the involvement of different brain pathways. With LDA, the effect appears largely due to the cortical impairment of visual motion processing with largely healthy brainstem and mid-brain responses (driving effective saccadic compensation). ASL and CSR however appear to affect both cortical and sub-cortical pathways, with at best partial saccadic compensation. Lastly, CSR is associated with an additional compromise due to a maladaptive decrease in saccade amplitude.

saccade↗
NASA NTRS1997

Creating a Simple Single Computational Approach to Modeling Rarefied and Continuum Flow About Aerospace Vehicles

We proposed to create a single computational code incorporating methods that can model both rarefied and continuum flow to enable the efficient simulation of flow about space craft and high altitude hypersonic aerospace vehicles. The code was to use a single grid structure that permits a smooth transition between the continuum and rarefied portions of the flow. Developing an appropriate computational boundary between the two regions represented a major challenge. The primary approach chosen involves coupling a four-speed Lattice Boltzmann model for the continuum flow with the DSMC method in the rarefied regime. We also explored the possibility of using a standard finite difference Navier Stokes solver for the continuum flow. With the resulting code we will ultimately investigate three-dimensional plume impingement effects, a subject of critical importance to NASA and related to the work of Drs. Forrest Lumpkin, Steve Fitzgerald and Jay Le Beau at Johnson Space Center. Below is a brief background on the project and a summary of the results as of the end of the grant.

Goldstein, David B.↗
NASA NTRS1997

Locating the Discontinuities of a Bounded Function by the Partial Sums of its Fourier Series I: Periodical Case

A key step for some methods dealing with the reconstruction of a function with jump discontinuities is the accurate approximation of the jumps and their locations. Various methods have been suggested in the literature to obtain this valuable information. In the present paper, we develop an algorithm based on identities which determine the jumps of a 2(pi)-periodic bounded not-too-highly oscillating function by the partial sums of its differentiated Fourier series. The algorithm enables one to approximate the locations of discontinuities and the magnitudes of jumps of a bounded function. We study the accuracy of approximation and establish asymptotic expansions for the approximations of a 27(pi)-periodic piecewise smooth function with one discontinuity. By an appropriate linear combination, obtained via derivatives of different order, we significantly improve the accuracy. Next, we use Richardson's extrapolation method to enhance the accuracy even more. For a function with multiple discontinuities we establish simple formulae which "eliminate" all discontinuities of the function but one. Then we treat the function as if it had one singularity following the method described above.

Kvernadze, George↗
NASA NTRS1984

Development of a dynamically adaptive grid method for multidimensional problems

An approach to solution adaptive grid generation for use with finite difference techniques, previously demonstrated on model problems in one space dimension, has been extended to multidimensional problems. The method is based on the popular elliptic steady grid generators, but is 'dynamically' adaptive in the sense that a grid is maintained at all times satisfying the steady grid law driven by a solution-dependent source term. Testing has been carried out on Burgers' equation in one and two space dimensions. Results appear encouraging both for inviscid wave propagation cases and viscous boundary layer cases, suggesting that application to practical flow problems is now possible. In the course of the work, obstacles relating to grid correction, smoothing of the solution, and elliptic equation solvers have been largely overcome. Concern remains, however, about grid skewness, boundary layer resolution and the need for implicit integration methods. Also, the method in 3-D is expected to be very demanding of computer resources.

Holcomb, J. E.↗
NASA NTRSDate not supplied

Inverse Text Normalization of Air Traffic Control System Command Center Planning Telecon Transcriptions

We present a hybrid neural network and rule-based Inverse Text Normalization (ITN) method for domains containing unique technical phraseology, specifically ATCSCC planning telecon audio transcriptions. The Air Traffic Control System Command Center (ATCSCC) hosts bihourly planning telephone conferences (or planning telecons) to ensure smooth operations within the National Airspace (NAS). Access to both live and post meeting transcripts of this speech audio would enable quick review of meetings. ITN is the process of converting un-formatted "raw'' speech-to-text transcripts into a human (expert) readable written form. Our hybrid ITN framework utilizes a neural network to format conversational English, and rule-based methods to format domain-specific aviation text. With a preliminary overall Word Error Rate with Punctuation and Capitalization (WER PC) of 8.26, we show that this method has vast potential in being applied to ATCSCC planning telecon audio and other audio/text based data available in ATM.

Air Traffic Management↗
NASA NTRS1984

Efficient matrix partitioning for optical computing

Techniques for partitioning optical linear algebra problems to make them amenable to solution using optical processors programmed with simple algorithms are explored. Generalized methods for splitting a linear algebra matrix into a series of submatrices are reviewed, showing that simple forms can be pipelined smoothly and that parallel accumulation can be achieved by beam combining on detectors or by summing electronically. The techniques offer simplified bookkeeping, algorithmic independence, and high efficiency. The computational speed will depend on the number of multiplier-accumulators devoted to the task.

Caulfield, H. J.↗
NASA NTRS1985

Proceedings of the Third Annual Symposium on Mathematical Pattern Recognition and Image Analysis

Topics addressed include: multivariate spline method; normal mixture analysis applied to remote sensing; image data analysis; classifications in spatially correlated environments; probability density functions; graphical nonparametric methods; subpixel registration analysis; hypothesis integration in image understanding systems; rectification of satellite scanner imagery; spatial variation in remotely sensed images; smooth multidimensional interpolation; and optimal frequency domain textural edge detection filters.

Guseman, L. F., Jr.↗
NASA NTRS1985

Comparison of predicted and measured drag for a single-engine airplane

Renewed interest in natural laminar flow (NLF) has rekindled designers' concerns that manufacturing deviations, (loss of surface contours or other surface imperfections) may destroy the effectiveness of NLF for an operational airplane. This paper reports on experimental research that compares predicted and measured boundary layer transition, total drag, and two-dimensional drag coefficients for three different wing surface conditions on an airplane typical of general aviation manufacturing technology. The three flight test phases included: (1) assessment of an unpainted airframe, (2) flight tests of the same airplane after painstakingly filling and sanding the wings to design contours, and (3) similar measurements after this airplane was painted. In each flight phase, transition locations were monitored using either sublimating chemicals or pigmented oil. As expected, total drag changes were difficult to measure. Two-dimensional drag coefficients were estimated using the Eppler-Somers code and measured with a wake rake in a method very similar to Jones' pitot traverse method. The net change in two-dimensional drag was approximately 20 counts between the unpainted airplane and the 'hand-smoothed' airplane for typical cruise flight conditions.

Ward, D. T.↗
NASA NTRS1988

Microgravity robotics technology program

A research program to develop technology for robots operating in the microgravity environment of the space station laboratory is described. These robots must be capable of manipulating payloads without causing them to experience harmful levels of acceleration, and the motion of these robots must not disturb adjacent experiments and operations by transmitting reactions that translate into damaging effects throughout the laboratory. Solutions to these problems, based on both mechanism technology and control strategies, are discussed. Methods are presented for reduction of robot base reactions through the use of redundant degrees of freedom, and the development of smoothly operating roller-driven robot joints for microgravity manipulators is discussed.

Rohn, Douglas A.↗
NASA NTRS1989

Solution of the hydrodynamic device model using high-order non-oscillatory shock capturing algorithms

A micron n+ - n - n+ silicon diode is simulated via the hydrodynamic model for carrier transport. The numerical algorithms employed are for the non-steady case, and a limiting process is used to reach steady state. The simulation employs shock capturing algorithms, and indeed shocks, or very rapid transition regimes, are observed in the transient case for the coupled system, consisting of the potential equation and the conservation equations describing charge, momentum, and energy transfer for the electron carriers. These algorithms, termed essentially non-oscillatory, were successfully applied in other contexts to model the flow in gas dynamics, magnetohydrodynamics, and other physical situations involving the conservation laws in fluid mechanics. The method here is first order in time, but the use of small time steps allows for good accuracy. Runge-Kutta methods allow one to achieve higher accuracy in time if desired. The spatial accuracy is of high order in regions of smoothness.

Fatemi, Emad↗
NASA NTRS1991

Recent developments in shock-capturing schemes

The development of the shock capturing methodology is reviewed, paying special attention to the increasing nonlinearity in its design and its relation to interpolation. It is well-known that higher-order approximations to a discontinuous function generate spurious oscillations near the discontinuity (Gibbs phenomenon). Unlike standard finite-difference methods which use a fixed stencil, modern shock capturing schemes use an adaptive stencil which is selected according to the local smoothness of the solution. Near discontinuities this technique automatically switches to one-sided approximations, thus avoiding the use of discontinuous data which brings about spurious oscillations.

Harten, Ami↗
NASA NTRS1991

A multiple-block multigrid method for the solution of the three-dimensional Euler and Navier-Stokes equations

A multiple block multigrid method for the solution of the three dimensional Euler and Navier-Stokes equations is presented. The basic flow solver is a cell vertex method which employs central difference spatial approximations and Runge-Kutta time stepping. The use of local time stepping, implicit residual smoothing, multigrid techniques and variable coefficient numerical dissipation results in an efficient and robust scheme is discussed. The multiblock strategy places the block loop within the Runge-Kutta Loop such that accuracy and convergence are not affected by block boundaries. This has been verified by comparing the results of one and two block calculations in which the two block grid is generated by splitting the one block grid. Results are presented for both Euler and Navier-Stokes computations of wing/fuselage combinations.

Atkins, Harold↗
NASA NTRS1991

Solution of the hydrodynamic device model using high-order non-oscillatory shock capturing algorithms

A micron n+ - n - n+ silicon diode is simulated via the hydrodynamic model for carrier transport. The numerical algorithms employed are for the non-steady case, and a limiting process is used to reach steady state. The simulation employs shock capturing algorithms, and indeed shocks, or very rapid transition regimes, are observed in the transient case for the coupled system, consisting of the potential equation and the conservation equations describing charge, momentum, and energy transfer for the electron carriers. These algorithms, termed essentially nonoscillatory, were successfully applied in other contexts to model the flow in gas dynamics, magnetohydrodynamics, and other physical situations involving the conservation laws in fluid mechanics. The method here is first order in time, but the use of small time steps allows for good accuracy. Runge-Kutta methods allow one to achieve higher accuracy in time if desired. The spatial accuracy is of high order in regions of smoothness.

Fatemi, Emad↗
NASA NTRS1993

A nonconforming multigrid method using conforming subspaces

For second-order elliptic boundary value problems, we develop a nonconforming multigrid method using the coarser-grid correction on the conforming finite element subspaces. The convergence proof with an arbitrary number of smoothing steps for nu-cycle is presented.

Lee, Chang Ock↗
NASA NTRS2002

Continuum Fitting HST QSO Spectra

The Principal Component Analysis (PCA) method which we are using to fit and describe QSO spectra relies upon the fact that QSO continuum are generally very smooth and simple except for emission and absorption lines. To see this we need high signal-to-noise (S/N) spectra of QSOs at low redshift which have relatively few absorption lines in the Lyman-a forest. We need a large number of such spectra to use as the basis set for the PCA analysis which will find the set of principal component spectra which describe the QSO family as a whole. We have found that too few HST spectra have the required S/N and hence we need to supplement them with ground based spectra of QSOs at higher redshift. We have many such spectra and we have been working to make them suitable for this analysis. We have concentrated on this topic since 12/15/01.

Tytler, David↗
NASA NTRS1991

Photometric geodesy of main-belt asteroids. IV - An updated analysis of lightcurves for poles, periods, and shapes

The Drummond et al. (1988) analysis of main-belt asteroids is presently extended, using three independent methods to derive poles, periods, phase functions, and triaxial ellipsoid shapes from lightcurve maxima and minima. This group of 26 asteroids is also reinvestigated with a view to the distributions of triaxial shapes and obliquity distributions. Poles weakly tend to avoid asteroid orbital planes; a rough-smooth dichotomization appears to be justified by the persistence of two solar phase angle-amplitude relations. Seven of the objects may be Jacobi ellipsoids if axial ratios are slightly exaggerated by a systematic effect of the analytical method employed.

Drummond, J. D.↗
NASA NTRS2005

Quickbird Satellite in-orbit Modulation Transfer Function (MTF) Measurement Using Edge, Pulse and Impulse Methods for Summer 2003

The spatial characteristics of an imaging system cannot be expressed by a single number or simple statement. However, the Modulation Transfer Function (MTF) is one approach to measure the spatial quality of an imaging system. Basically, MTF is the normalized spatial frequency response of an imaging system. The frequency response of the system can be evaluated by applying an impulse input. The resulting impulse response is termed the Point Spread function (PSF). This function is a measure of the amount of blurring present in the imaging system and is itself a useful measure of spatial quality. An underlying assumption is that the imaging system is linear and shift-independent. The Fourier transform of the PSF is called the Optical Transfer Function (OTF) and the normalized magnitude of the OTF is the MTF. In addition to using an impulse input, a knife-edge in technique has also been used in this project. The sharp edge exercises an imaging system at all spatial frequencies. The profile of an edge response from an imaging system is called an Edge Spread Function (ESF). Differentiation of the ESF results in a one-dimensional version of the Point Spread Function (PSF). Finally, MTF can be calculated through use of Fourier transform of the PSF as stated previously. Every image includes noise in some degree which makes MTF of PSF estimation more difficult. To avoid the noise effects, many MTF estimation approaches use smooth numerical models. Historically, Gaussian models and Fermi functions were applied to reduce the random noise in the output profiles. The pulse-input method was used to measure the MTF of the Landsat Thematic Mapper (TM) using 8th order even functions over the San Mateo Bridge in San Francisco, California. Because the bridge width was smaller than the 30-meter ground sample distance (GSD) of the TM, the Nyquist frequency was located before the first zero-crossing point of the sinc function from the Fourier transformation of the bridge pulse. To avoid the zero-crossing points in the frequency domain from a pulse, the pulse width should be less than the width of two pixels (or 2 GSD's), but the short extent of the pulse results in a poor signal-to-noise ratio. Similarly, for a high-resolution satellite imaging system such as Quickbird, the input pulse width was critical because of the zero crossing points and noise present in the background area. It is important, therefore, that the width of the input pulse be appropriately sized. Finally, the MTF was calculated by taking ratio between Fourier transform of output and Fourier transform of input. Regardless of whether the edge, pulse and impulse target method is used, the orientation of the targets is critical in order to obtain uniformly spaced sub-pixel data points. When the orientation is incorrect, sample data points tend to be located in clusters that result in poor reconstruction of the edge or pulse profiles. Thus, a compromise orientation must be selected so that all spectral bands can be accommodated. This report continues by outlining the objectives in Section 2, procedures followed in Section 3, descriptions of the field campaigns in Section 4, results in Section 5, and a brief summary in Section 6.

Helder, Dennis↗