Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Shock dynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Shock response of He bubbles in single crystal Cu

With large-scale molecular dynamics simulations, we investigate shock response of He nanobubbles in single crystal Cu. For sufficient bubble size or internal pressure, a prismatic dislocation loop may form around a bubble in unshocked Cu. The internal He pressure helps to stabilize the bubble against plastic deformation. However, the prismatic dislocation loops may partially heal but facilitate nucleation of new shear and prismatic dislocation loops. For strong shocks, the internal pressure also impedes internal jetting, while a bubble assists local melting; a high speed jet breaks a He bubble into pieces dispersed among Cu. Near-surface He bubbles may burst and form high velocity ejecta containing atoms and small fragments, while the ejecta velocities do not follow the three-dimensional Maxwell-Boltzmann distributions expected for thermal equilibrium. The biggest fragment size deceases with increasing shock strength. With a decrease in ligament thickness or an increase in He bubble size, the critical shock strength required for bubble bursting decreases, while the velocity range, space extension and average velocity component along the shock direction, increase. Small bubbles are more efficient in mass ejecting. Compared to voids and perfect single crystal Cu, He bubbles have pronounced effects on shock response including bubble/void collapse, Hugoniot elastic limit (HEL), deformation mechanisms, and surface jetting. HEL is the highest for perfect single crystal Cu with the same orientations, followed by He bubbles without pre-existing prismatic dislocation loops, and then voids. Complete void collapse and shear dislocations occur for embedded voids, as opposed to partial collapse, and shear and possibly prismatic dislocations for He bubbles. He bubbles lower the threshhold shock strength for ejecta formation, and increase ejecta velocity and ejected mass.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A comparison of two- and three-dimensional single-mode reshocked Richtmyer–Meshkov instability growth

The growth dynamics of two- and three-dimensional single-mode reshocked Richtmyer–Meshkov instability are compared systematically using data from high-resolution implicit large-eddy simulations of a model of the Mach 1.3 air(acetone) and sulfur hexafluoride (Jacobs and Krivets, 2005) shock tube experiment. The vorticity deposition by the incident shock and the dynamics of interface evolution are examined quantitatively and qualitatively. The perturbation amplitudes from the two- and three-dimensional simulations are compared to the experimental data and to the predictions of several nonlinear instability growth models. It is shown that the perturbation amplitudes from the two- and three-dimensional simulations with matching initial Richtmyer velocity are in excellent agreement with the experimental data. In addition, the dynamics of reshock (not considered in the experiment) are described in detail, and the post-reshock mixing layer amplitude growth rate is compared to the predictions of several reshock models. It is shown that using two-dimensional simulations to understand three-dimensional dynamics is valid only at early-to-intermediate times before reshock; at intermediate-to-late times after reshock the three-dimensional growth is generally larger than the corresponding two-dimensional growth. Furthermore, the reshock dynamics are also different between two and three dimensions. The quantitative results, together with visualizations of the flow field, were also used to contrast the difference between two- and three-dimensional vorticity and enstrophy dynamics.

42 ENGINEERING↗

Measurements of the inert Hugoniot and observation of mechanical ignition in Ni(V) + Al reactive multilayers via x-ray diffraction

This study investigates the inert Hugoniot response, mechanical ignition, and reaction dynamics of Ni(V)+Al multilayers during longitudinal, laser-driven shock compression experiments. Ni(V)+Al multilayers, known for their self-propagating exothermic reactions, were subjected to longitudinal stresses exceeding 50 GPa using the laser shock facility within the Dynamic Compression Sector (DCS) at the Advanced Photon Source (APS). In situ x-ray diffraction (XRD) revealed that Ni(V) and Al were not in equilibrium during compression, with stress discrepancies attributed to twinning, grain structure effects, and/or dislocation density. However, the measured inert Hugoniot closely matched prior experimental and computational studies, confirming the utility of XRD for measuring the equation of state of thin, complex materials. Additionally, reaction was observed at significantly higher stresses than reported previously using laser-launched flyers. This discrepancy suggests a strong influence of externally imposed shear stress on reaction thresholds, which likely arose from deviations in flyer planarity during past experiments. Full reaction of the multilayer occurred within 40 ns after shock-wave passage, evidenced by complete melting of the constituents. Eulerian hydrocode simulations replicated experimental conditions, providing insights into equilibrium dynamics and experimental artifacts. The results highlight how even small shear forces facilitate ignition in Ni(V)+Al multilayers at lower stresses.

Crystallography↗

Linear and nonlinear electrostatic modes in a strongly coupled quantum plasma

The properties of linear and nonlinear electrostatic waves in a strongly coupled electron-ion quantum plasma are investigated. In this study, the inertialess electrons are degenerate, while non-degenerate inertial ions are strongly correlated. The ion dynamics is governed by the continuity and the generalized viscoelastic momentum equations. The quantum forces associated with the quantum statistical pressure and the quantum recoil effect act on the degenerate electron fluid, whereas strong ion correlation effects are embedded in generalized viscoelastic momentum equation through the viscoelastic relaxation of ion correlations and ion fluid shear viscosities. Hence, the spectra of linear electrostatic modes are significantly affected by the strong ion coupling effect. In the weakly nonlinear limit, due to ion-ion correlations, the quantum plasma supports a dispersive shock wave, the dynamics of which is governed by the Korteweg-de Vries Burgers' equation. For a particular value of the quantum recoil effect, only monotonic shock structure is observed. Possible applications of our investigation are briefly mentioned.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Dynamic reflectance changes in high-purity zirconium when it is shocked from the α to ω phase

Flash lamp-illuminated integrating spheres have been used to measure the dynamic reflectance at the interface between a shocked metal target and a window maintaining the shock stress. In conjunction with radiance measurements, this method was recently used to study the pressure versus temperature phase boundary of the beta phase to body-centered-tetragonal transition of tin at around 13 GPa and, in separate experiments, to show a relationship between the reflectance and the phase fraction. We have used this technique to measure the ratio, R, of the dynamic reflectance relative to the ambient value for a high-purity zirconium sample attached to a sapphire window to study the alpha to omega phase transition. Nine experiments cover the range of stress, σ, from 4 to 16 GPa at six wavelengths from 500 to 1550 nm. The two phases in zirconium differ in volume by <1%, so a phase change between them can be difficult to identify from anomalies in the particle velocity measured on the shock Hugoniot. The phase boundary is believed to cross the Hugoniot around 3 GPa, but dynamically it is observed at much higher stresses >6 GPa. Our results show that the relative reflectance decreases upon initial shock in the alpha state but increases as the material transforms to its omega state. The slope dR/dσ changes the sign around the phase transition. For shocks below 6 GPa, dR/dσ < 0, and for σ above 10 GPa, dR/dσ > 0. In the stress region between 6 and 10 GPa, dR/dσ varies somewhat, perhaps due to the band structure or because the transition is incomplete there. I. INTRODUCTION

74 ATOMIC AND MOLECULAR PHYSICS↗

Hands-on Introduction to Shock Physics (2020 Report, RR2020-IPD-1)

Los Alamos National Laboratory (LANL) researchers have played key roles in the development of high-pressure science and shock physics since the 1950s. Central to the Laboratory’s experimental capability are multiple impact systems and explosive loading capabilities that span impact velocities in excess of 8 km/s. More recently, our efforts have taken us to 3rd and 4th generation light sources where these loading platforms are coupled to X-ray diagnostics that are now providing new insights into matter-at-extremes. As the availability of these new diagnostics and loading techniques increases, there is an increased need within the high pressure community for researchers with the knowledge base and expertise to use them. Few institutions offer any level of theoretical or experimental coursework designed to train students for work in the field of shock physics or dynamic compression science, and those that do cannot meet the current demand of the national laboratories.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High-speed x-ray phase contrast imaging and digital image correlation analysis of microscale shock response of an additively manufactured energetic material simulant

The performance of energetic materials subjected to dynamic loading significantly depends on their micro- and meso-scale structural morphology. The geometric versatility offered by additive manufacturing opens new pathways to tailor the performance of these materials. Additively manufactured energetic materials (AMEMs) have a wide range of structural characteristics with a hierarchy of length scales and process-inherent heterogeneities, which are hitherto difficult to precisely control. It is important to understand how these features affect AMEMs’ response under dynamic/shock loading. Therefore, temporally and spatially resolved measurements of both macroscopic behavior and micro- and meso-level processes influencing macroscopic behavior are required. In this paper, we analyze the shock compression response of an AMEM simulant loaded under several impact conditions and orientations. Furthermore, x-ray phase contrast imaging (PCI) is used to track features across the observed shock front and determine the linear shock velocity vs particle velocity equation of state, as well as to quantify the interior deformation fields via digital image correlation (DIC) analyses. Photon Doppler velocimetry is simultaneously used to measure the particle velocities of the specimens, which are consistent with those obtained from x-ray PCI. The DIC analyses provide an assessment of the average strain fields inside the material, showing that the average axial strain depends on the loading intensity and reaches as high as 0.23 for impact velocities up to 1.5 km/s. The overall results demonstrate the utility of x-ray PCI for probing “in-material” equation of state and interior strains associated with dynamic shock compression behavior of the AMEM simulant.

3D printing↗

Magnetospheric response to solar wind dynamic pressure variations: Interaction of interplanetary tangential discontinuities with the bow shock

Some magnetic impulse events observed in the polar region are related to vortices associated with plasma convection in the ionosphere. Recent analyses of satellite and ground data suggest that the interaction of solar wind dynamic pressure pulses and the magnetosphere may lead to the formation of velocity vortices in the magnetopause boundary layer region. This can in turn lead to the presence of vortices in the polar ionosphere. However, before reaching the Earth's magnetopause, these interplanetary pressure pulses must interact with and pass through the bow shock. A variation of the solar wind dynamic pressure may be associated with shocks, magnetic holes, or tangential discontinuities (TDs) in the interplanetary medium. We study the interaction of interplanetary TDs with the Earth's bow shock (BS) using both theoretical analysis and MHD computer simulations. It is found that as a result of the collision between a TD and the BS, the jump in the solar wind dynamic pressure associated with the TD is significantly modified, the bow shock moves, and a new fast shock or fast rarefaction wave, which propagates in the downstream direction, is excited. Our theoretical analysis shows that the change in the plasma density across the interplanetary TD plays the most important role in the collision process. In the case with an enhanced dynamic pressure behind the interplanetary TD, the bow shock is intensified in strength and moves in the earthward direction. The dynamic pressure jump associated with the transmitted TD is generally reduced from the value before the interaction. A fast compressional shock is excited ahead of the transmitted TD and propagates toward the Earth's magnetosphere. For the case in which the dynamic pressure is reduced behind the interplanetary TD, the pressure jump across the transmitted TD is substantially weakened, the bow shock moves in the sunward direction, and a rarefaction wave which propagates downstream is excited. We also simulate and discuss the interaction of a pair of tangential discontinuities, which may correspond to a magnetic hole, with the BS.

Wu, Bor-Han↗

Dust in Interstellar Clouds, Evolved Stars and Supernovae

Outflows of pre-main-sequence stars drive shocks into molecular material within 0.01-1 pc of the young stars. The shock-heated gas emits infrared lines of H{sub 2} and H{sub 2}O and millimeter and submillimeter lines of many species including CO, SiO, H{sub 2}S and HCO{sup +}. Dust grains are important charge carriers and play a large role in coupling the magnetic field and flow of neutral gas. Some understanding of the effects of the dust on the dynamics of oblique shocks began to emerge in the 1990s. However, detailed models of these shocks are required for the calculation of the grain sputtering contribution to gas phase abundances of species producing observed emissions. We are developing such models.Some of the molecular species introduced into the gas phase by sputtering in shocks or by thermally driven desorption in radiatively heated hot cores form on grain surfaces. Recently laboratory studies have begun to contribute to the understanding of surface reactions and thermally driven desorption important for the chemistry of star forming clouds.Dusty plasmas are prevalent in many evolved stars just as well as in star forming regions. Radiation pressure on dust plays a significant role in mass loss from some post-main-sequence stars. The mechanisms leading to the formation of carbonaceous dust in the stellar outflows are similar to those important for soot formation in flames. However, nucleation in oxygen-rich outflows is less well understood and remains a challenging research area.Dust is observed in supernova ejecta that have not passed through the reverse shocks that develop in the interaction of ejecta with ambient media. Dust is detected in high redshift galaxies that are sufficiently young that the only stars that could have produced the dust were so massive that they became supernovae. Consequently, the issue of the survival of dust in strong supernova shocks is of considerable interest.

79 ASTRONOMY AND ASTROPHYSICS↗