Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Shear Layers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
NASA NTRS2024

Direct Numerical Simulation of Smooth-Body Flow Separation Around a Ramp

Spanwise-periodic computation of a turbulent flow past a two-dimensional smooth ramp geometry is performed in the form of a direct numerical simulation. The Reynolds number based on the ramp height is about 147,000. A straight section that precedes the smooth ramp allows the incoming turbulent boundary layer to grow under a weak favorable pressure gradient. The boundary layer introduced at the domain inlet has a momentum-thickness based Reynolds number of 2000. The turbulent boundary layer nearing the ramp first interacts with a relatively stronger favorable pressure gradient, followed by a strong adverse pressure gradient. Consequently, the boundary layer experiences a modest acceleration before decelerating and separating. Analysis of the data over this region hints at the formation of an internal layer beneath the accelerated boundary layer. The analysis also reveals that this internal layer forms the origin of the free shear layer that emerges in the deceleration region and separates. The streamwise extent of the separated region is comparable to the ramp length, while the viscous layer thickness near reattachment is about the same as the ramp height; hence, the boundary layer undergoing separation and subsequent reattachment in the present configuration experiences its thickness being amplified by about tenfold. The reattached flow continues to develop further under a diminishing pressure gradient in the recovery region in a similar fashion to a zero pressure gradient turbulent boundary layer.

Turbulence↗
NASA NTRS1992

Improved two-equation k-omega turbulence models for aerodynamic flows

Two new versions of the k-omega two-equation turbulence model will be presented. The new Baseline (BSL) model is designed to give results similar to those of the original k-omega model of Wilcox, but without its strong dependency on arbitrary freestream values. The BSL model is identical to the Wilcox model in the inner 50 percent of the boundary-layer but changes gradually to the high Reynolds number Jones-Launder k-epsilon model (in a k-omega formulation) towards the boundary-layer edge. The new model is also virtually identical to the Jones-Lauder model for free shear layers. The second version of the model is called Shear-Stress Transport (SST) model. It is based on the BSL model, but has the additional ability to account for the transport of the principal shear stress in adverse pressure gradient boundary-layers. The model is based on Bradshaw's assumption that the principal shear stress is proportional to the turbulent kinetic energy, which is introduced into the definition of the eddy-viscosity. Both models are tested for a large number of different flowfields. The results of the BSL model are similar to those of the original k-omega model, but without the undesirable freestream dependency. The predictions of the SST model are also independent of the freestream values and show excellent agreement with experimental data for adverse pressure gradient boundary-layer flows.

Menter, Florian R.↗
NASA NTRS1991

Assessment of meanflow solutions for instability analysis of transitioning flows

Meanflow solutions of 3D supersonic flow past a cone at incidence and a swept leading edge wing have been obtained by thre methods, viz., boundary-layer, parabolized Navier-Stokes, and thin shear-layer Navier-Stokes solvers. The smoothness and accuracy of the solution profiles are compared with a view to applying the meanflow solution to boundary-layer stability analysis.

Iyer, Venkit↗
NASA NTRS1992

Measurements in a leading-edge separation bubble due to a simulated airfoil ice accretion

The separation bubble formed on an airfoil at low Reynolds number behind a simulated leading-edge glaze ice accretion is studied experimentally. Surface pressure and split hot-film measurements as well as flow visualization studies of the bubble reattachment point are reported. The simulated ice generates an adverse pressure gradient that causes a laminar separation bubble of the long bubble type to form. The boundary layer separates at a location on the ice accretion that is independent of angle of attack and reattaches at a downstream location 5-40 percent chord behind the leading edge, depending on the angle of attack. Velocity profiles show a large region of reverse flow that extends up from the airfoil surface as much as 2.5 percent chord. After reattachment, a thick distorted turbulent boundary layer exists. The separation bubble growth and reattachment are clearly seen in the plots of boundary-layer momentum thickness vs surface distance. Local minima and maxima in the boundary-layer momentum thickness development compare well with the shear layer transition point as indicated by the surface pressures and the reattachment point as measured from surface oil flow, respectively.

Bragg, M. B.↗
NASA NTRS1978

Building wakes in disturbed layers

The wind profiles in the wakes of buildings in a disturbed shear layer are investigated for conditions experienced during aircraft take-off and landing. Experiments were conducted in a pipe flow apparatus in which an equilibrium flow is disturbed by pipe roughness, simulating obstacles upwind of a building, with the disturbed flow made to flow past a second obstacle, simulating a building. Velocity and turbulence profiles of disturbed and equilibrium flows upstream and downstream of the obstacles are presented. It is concluded that the integrated momentum flow of a boundary layer behind an obstacle can be greater than the upstream momentum flow, if the exponent of the upstream velocity profile is sufficiently high and the boundary layer has been disturbed by upstream obstacles. The rise of the turbulence level behind the obstacle is also dependent on the profile exponent in a disturbed layer.

Logan, E.↗
NASA NTRS1987

Roles of initial condition and vortex pairing in jet noise

Sound generation by vortex pairing in circular and elliptic cold-air jets at Mach 0.15-0.35 is investigated experimentally, with a focus on the effects of initial conditions. The results are presented in graphs and interpreted using the theory of vortex sound proposed by Moehring (1978) and vortex-filament models of jet coherent structure. Tripping the nozzle boundary layer is shown to (1) preempt formation of shear-layer vortices, (2) remove the sound they produce in later pairing, and (3) increase the diffusion of coherent vorticity in the vortex rings. Hence pairing noise should not be significant in practical jets, which are initially turbulent.

Bridges, J. E.↗
NASA NTRS1987

Numerical simulation of nonlinear interactions in channel and boundary-layer transition

The basic numerical techniques used for the direct simulation of transition to turbulence are described. Applications are presented for the computation of finite amplitude, two-dimensional steady states, the simulation of the secondary instability of channels and boundary-layers, and the simulation of the breakdown of detached shear layers.

Zang, T. A.↗
NASA NTRS1998

Wake Management Strategies for Reduction of Turbomachinery Fan Noise

The primary objective of our work was to evaluate and test several wake management schemes for the reduction of turbomachinery fan noise. Throughout the course of this work we relied on several tools. These include 1) Two-dimensional steady boundary-layer and wake analyses using MISES (a thin-shear layer Navier-Stokes code), 2) Two-dimensional unsteady wake-stator interaction simulations using UNSFLO, 3) Three-dimensional, steady Navier-Stokes rotor simulations using NEWT, 4) Internal blade passage design using quasi-one-dimensional passage flow models developed at MIT, 5) Acoustic modeling using LINSUB, 6) Acoustic modeling using VO72, 7) Experiments in a low-speed cascade wind-tunnel, and 8) ADP fan rig tests in the MIT Blowdown Compressor.

Waitz, Ian A.↗
NASA NTRS1999

Reduction of Base Drag on Launch Vehicles

This report describes the work accomplished during a first-year investigation of base drag reduction for launch vehicles. Interest in this work has arisen due to the large base areas associated with the current generation of launch vehicles. For example, the X-33 and Venture Star configurations all have large base areas because of the aero-spike engines they use. Because of the large base-to-wetted area ratios of these vehicles, the majority of the vehicle drag is due to base drag. Based on previous research, there appears to be a means for reducing the base drag on such vehicles. A clear relationship between viscous fore-body drag and base drag was demonstrated. For subsonic flow conditions, an increase in fore-body drag causes a decrease in base drag. This base-drag reduction is a result of boundary layer effects at the base of the vehicle. The shear layer that develops from the boundary layer separating at the back of the vehicle is the conduit through which momentum is transferred from the high energy free-stream flow to the low-energy fluid in the base area. One way to think of the base drag is that it is the momentum required to accelerate this low-energy fluid. The boundary layer that develops on the fore body acts as an "insulator" between the external flow and the low-energy air at the base. As the viscous fore-body drag is increased, the boundary layer thickness at the aft end of the fore body increases, thereby reducing the rate at which momentum is transferred to the base area. As a result of the lower momentum transfer (or reduced pumping), the base pressure coefficient rises resulting in a reduction of base drag.

Naughton, Jonathan↗
NASA NTRS1989

Response of a chemically reacting layer to streamwise vorticity

A series of Direct Numerical Simulations of a temporally evolving shear layer subject to both harmonic (2D) and streamwise (3D) forcing were performed. The interaction and coupling of these various 2D and 3D modes is shown to significantly alter the development of the flow. The scale of the 3D modes is quite important to the coupling process with greatly enhanced mixing and product formation resulting from 3D modes that are rapidly amplified by the spanwise vorticity. In general, the longer wavelength 3D modes are found to be highly efficient at increasing the momentum transport while the shorter wavelengths increase mass transport.

Claus, Russell W.↗
NASA NTRS1990

Modeling of compressible turbulence

The work is directed toward understanding and modeling compressibility effects in turbulent flows. The primary objective is to investigate how compressibility influences the basic turbulence processes such as turbulence production and dissipation, length scale modification, spectral energy transfer, etc. The second objective is to develop parameterization schemes and models to incorporate compressibility into one-point closure models and into the subgrid scale models for LES techniques. The ultimate purpose of this research is to develop compressible turbulence models which are capable of handling the hypersonic regime. Specifically, the emphasis will be on the model capability of predicting: (1) heat and momentum transfer in hypersonic boundary layers; and (2) mixing and growth of high Mach number shear layers, jet and wakes.

Zeman, O.↗
NASA NTRS1992

Characterization of dynamic stall phenomenon using two-dimensional unsteady Navier-Stokes equations

Among the new significant aspects of the present work are: (1) the treatment of the far-field boundary; (2) the use of C-grid topology, with the branch-cut singularity treated analytically; (3) evaluation of the effect of the envelope of prevailing initial states, and finally; (4) the ability to employ streakline/pathline 'visualization' to probe the unsteady features prevailing in vortex-dominated flows. The far-field boundary is placed at infinity, using appropriate grid stretching. This contributes to the accuracy of the solutions, but raised a number of important issues which needed to be resolved; this includes determining the equivalent time-dependent circulation for the pitching airfoil. A secondary counter-clockwise vortex erupts from within the boundary layer and immediately pinches off the energetic leading-edge shear layer which then, through hydrodynamic instability, rolls up into the dynamic stall vortex. The streakline/pathline visualization serves to provide information for insight into the physics of the unsteady separated flow.

Ghia, K. N.↗
NASA NTRS1997

Rotor Vortex Filaments: Living on the Slipstream's Edge

The purpose of this paper is to gain a better understanding of rotor wake evolution in hover and axial flow by deriving an analytical solution for the time dependent behavior of vortex filament circulation and core size. This solution is applicable only for vortex filaments in the rotor far-wake. A primarily inviscid vortex/shear layer interaction (where the slipstream boundary is modeled as a shear layer) has been identified in this analytical treatment. This vortex/shear layer interaction results in decreasing, vortex filament circulation and core size with time. The inviscid vortex/shear layer interaction is shown, in a first-order treatment, to be of greater magnitude than viscous diffusion effects. The rate of contraction, and ultimate collapse, of the vortex filament core is found to be directly proportional to the rotor inflow velocity. This new insight into vortex filament decay promises to help reconcile several disparate observations made in the literature and will, hopefully, promote new advances in theoretical modeling of rotor wakes.

Young, Larry A.↗
NASA NTRS2024

Microgravity Flow Boiling Experiments With Liquid-Vapor Mixture Inlet Onboard the International Space Station

This article is part of a series of studies culminating from the multi-objective Flow Boiling and Condensation Experiment (FBCE) onboard the International Space Station, which utilized the Flow Boiling Module (FBM) for experiments between February and July 2022. This study investigates microgravity flow boiling of n-Perfluorohexane with liquid-vapor mixture (two-phase) inlet conditions to the FBM with either one or two opposite walls heated. The FBM’s channel has a rectangular cross-sectional area of 5.0 × 2.5 mm 2 and a heated length of 114.6 mm. Key parameters of interest include mass velocity (180 – 2400 kg/m 2 s), inlet quality (-0.01 – 0.87), inlet pressure (120 – 200 kPa), and heat flux (1.8 W/cm 2 to critical heat flux), and a large database is amassed. The flow is visualized via a high-speed video camera and photographs are recorded at each heating increment to assess the periodic flow patterns within the channel and the near-wall interfacial behavior. Flow patterns are complex and mainly characterized by high- and low-density fronts alternately traversing the channel to yield high- and low-density-dominant periods of boiling. At all operating conditions, high-density fronts are faster during high-density-dominant periods. At low inlet qualities, the flow is annular near the channel inlet with a central vapor core surrounded by an annular liquid layer. Each high-density front having a high liquid fraction leaves a thin liquid layer sheared onto the heated walls. Boiling occurs within the liquid layer and a vapor layer is formed next to the heated wall. Inlet quality and mass velocity most dictate the overall flow patterns followed by heating configuration, and to a much lesser extent, heat flux and inlet pressure. Heat transfer characteristics are assessed via averaged boiling curves, streamwise profiles of wall temperature and heat transfer coefficient, and parametric curves of local and averaged heat transfer coefficients. Inlet pressure has an insignificant effect on heat transfer. At similar operating conditions, both the heating configurations yield similar trends and values of heat transfer coefficient and critical heat flux (CHF, slightly higher for single-sided) even though double-sided heating adds twice the heat to the fluid and doubly raises local quality. The heat fluxes required for both onset of nucleate boiling degradation and CHF are larger at high mass velocities and low inlet qualities. For a fixed inlet quality, high mass velocities yield higher average heat transfer coefficients at both lower and higher heat fluxes, while the nucleate boiling regime at intermediate heat fluxes is unaffected. For a fixed mass velocity, higher inlet qualities yield higher and lower average heat transfer coefficients at lower and higher heat fluxes, respectively.

Microgravity↗
NASA NTRS1991

Growth Of Instabilities In Two Types Of Mixing Layers

Report discusses issues involved in computation of growth of instabilities and vorticity in mixing (shear) layer between two parallel flows having different speeds and separated initially by flat surface. Study focusses upon degree to which these growing flow structures hasten or retard their own further growth, and upon related question of differences between flows computed according to mathematical models of S-layer and T-layer mixing. Transformation method used offers suitable tool for study of such flows.

Kaul, Upender K.↗
NASA NTRS1991

An experimental investigation of boundary layer transition in an adverse pressure gradient

The evolution of a small perturbation introduced periodically into a boundary layer with a moderately strong adverse pressure gradient (APG) was investigated experimentally using the hot-wire method. The magnitude of the disturbance is found to decay with the streamwise distance in the APG before undergoing rapid growth and triggering transition in a very repetitive manner. The evidence suggests that the laminar layer separates and that the transition mechanism is an inviscid shear-layer type of instability. Contours of spanwise vorticity in the plane of the disturbance show the formation of roll-ups in the initial stages. Subsequent interaction with the wall leads to the formation of large-scale vortex loops which merge into a single vortex loop further downstream.

Watmuff, Jonathan H.↗
NASA NTRS1972

Spreading of a turbulent disturbance.

The presented paper shows the effect of local Mach number on the turbulent disturbance spreading angle relative to the wall and on lateral disturbance spreading angles. Almost all the disturbances angles relative to the wall were determined from investigations where hot-wire contours or hot-film surveys of a 'laminar' boundary layer were obtained. Lateral disturbance spreading angles were obtained from investigations of various conditions including turbulent bursts, reported observations of transverse contamination, and observed transitional flow. It is noted that the disturbance spreading angle relative to the wall seems to remain essentially invariant with Mach number, while the lateral spreading angle decreases sharply with increasing Mach number up to about 6. The good agreement between lateral disturbance spreading angle data and data for the variation of turbulent jet spreading angle with Mach number implies that in the lateral dimension, turbulence in a boundary layer may develop essentially free of wall constraints (similar to a free shear layer).

Fischer, M. C.↗