SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A system and method measures subterranean stress. The system and method includes a cement mixture that is mixed with water to set as a solid and a stress measuring-medium having piezospectroscopic properties that directly reveals stress in situ within the cement mixture in response to a photo stimulation. The stress measuring-medium combines with the cement mixture as a dry blend before being combined with water.
A system for performing distributed measurements of in-situ stress includes an expandable element with at least one fiber optic sensor. The expandable element can be positioned at various depths in a hole in a substrate. A pressurizing device expands (and contracts) the expandable element when the expandable element is inserted in the hole in the substrate to exert pressure on the hole wall. A pressure sensor provides a sensor output indicative of a pressure applied to the hole wall by the expandable element. The fiber optic sensor and an optical interrogator measure strain along a length of the sensor in a continuous, high spatial resolution manner Based on the measured strain and pressure sensor output, the system determines various properties of the substrate such as, minimum principal stress, maximum principal stress, and/or principal stress direction associated with one or more fractures in the substrate, as well as substrate modulus.
As the Boiler and Pressure Vessel Code increasingly gains popularity worldwide, it is not uncommon that many users are mystified by the 1.1 factor required for ultimate tensile strength above room temperature in developing the allowable design stresses of Section II Part D Stress Tables. Questions often arise about the origin and purpose of the factor, the reason for it not applied to the yield strength, its due considerations when evaluating an alloy for acceptance to construction use from the perspective of the alloy’s tested tensile strength value, and more. Not knowing reliable sources for explicit explanations, some users tend to misinterpret the factor, abuse its application, incorrectly define their alloy acceptance or qualification criteria, and mistakenly manipulate the safety margin in structural component design.To help the Code users who struggle with these frequent and confusing issues, particularly those in nuclear industry where rigorous criteria are required for component design and alloy acceptance or qualification, this paper is intended to demystify the 1.1 factor and facilitate knowledgeable interpretation and use of the Section II Part D Stress Tables as well as relevant Mandatory Appendices.A brief review is first given on the background of the 1.1 factor, followed by a summary of its application in the Stress Tables. The provenance and purpose of the factor are then discussed in detail with graphic examples. Finally, current applicability and necessity of the factor are considered through a demonstration using example alloys.
In view of the increasing interest and market share of bifacial cells and modules, suitable substrates such as glass and transparent backsheets along with ethylene vinyl acetate (EVA) and polyolefin elastomer (POE) encapsulants were examined in combined-accelerated stress testing (C-AST) to evaluate and compare degradation modes. Testing with both monofacial and bifacial cells, we found glass-glass modules with monofacial cells led to greater grid finger breakage than those with polymeric backsheets. This is attributed to previous x-ray topography work showing higher stress in cells in glass-glass modules than glass backsheet modules. Consistent with the objectives of C-AST, which stresses modules at levels corresponding to the limits seen in the natural environment, we observed the UV-fluorescence signatures of modules tested in C-AST (considering the degradation associated with developing chromophores, moisture penetration and photobleaching effects) to be like those in fielded modules, more so than other chamber stress testing implemented for comparison. Finally, among multiple cell degradation modes that we observed such as light-induced degradation (LID), we differentiated susceptibility to potential-induced degradation (PID) on the back of the bifacial Passivated Emitter Back Cells (PERC) in C-AST. Confirming with ex-situ tests, we found polarization-type PID most prevalent in glass/glass modules with EVA as would be anticipated considering the greater leakage current through such module encapsulation. Unlike PID tests performed in the dark, which can lead to false positive PID test results, field-representative illumination is experienced by the modules on the front and back side while -1200 V system voltage is applied in C-AST, supporting the conclusion that this module type would be susceptible to PID in the field.
The present disclosure relates to a method that includes depositing a spalling layer onto a surface that includes a substrate, depositing a device comprising a III-V material onto the spalling layer, resulting in the forming of a stack, and dividing the stack substantially at a plane positioned within the spalling layer to form a first portion that includes the substrate and a second portion that includes the PV device, where the spalling layer includes a first layer configured to provide a compressive stress and a second layer configured to provide a tensile stress, the first layer and the second layer form an interface, the dividing occurs as result of the interface, and the compressive stress and the tensile stress are strain-balanced so that a total strain within the spalling layer is approximately zero.
Disclosed are a system and methods for calibrating wall shear stress sensors. The system includes an oscillating plate coupled to an actuator and mounted on a rolling elements, and one or more sensors coupled to a height adjusting device. The system can further comprise a height control rod coupled to a height control base and a sensor holder configured to house the one or more sensors and supported on a connector, the connector configured to be rotatably disposed about the height control rod. The system can be calibrated by causing the actuator to oscillate the oscillating plate at a frequency, sensing, using the one or more sensors, shear stress at a wall, the shear stress at the wall being associated with a velocity field, and determining a theoretical wall shear stress based on fluid properties, the frequency, and the height of the one or more sensors above the oscillating plate.
Type 304H and 316H stainless steels are codified in the ASME Boiler and Pressure Vessel Code for Section III, Division 5, Class A construction for up to 1500F (816C) and 300,000 hours. Extension of the design lifetimes to 500,000 hours has been undertaken by various research projects and by the ASME Section III, Division 5 Code Committees. Due to a long-standing issue related to non-classical creep behavior on the use of the time to the onset of tertiary creep as one of the time-dependent allowable stress criteria, little progress was made in the extension of the time-dependent allowable stresses for Type 304H and 316H stainless steels. A recent effort by Dabrow and Nestell (Impact of Tertiary Creep on Time Dependent Allowable Stresses for Type 304H and 316H Stainless Steels, Report 0300-0003-RPT-001, MPR Associates, Alexandria, VA, 2020) has provided a rational method for the treatment of the highly variable data for the time to onset of tertiary creep. In this paper, the background formulas for determining the time-dependent allowable stress values of Type 304H and 316H stainless steels, as assembled from relevant project work, are presented. These updates and extensions are being recommended to the ASME Code committees for approval, and are subject to change upon feedback from ASME Section III Code committees.
Manufacturing methods, material selections and unique plate geometries used in low enriched uranium plate fuels for the High Performance Research Reactor (HPRR) have led to concerns about the residual stresses effect on bond strength of the fuel/cladding interfaces and overall fuel performance under irradiation. The current HPRR plate fuel test program performed residual stress calculations using the contour method with experimental displacement data obtained by incrementally cutting the plate fuel. In this work, we use a gradient based inverse optimization module developed within the MOOSE framework to estimate normal and shear residual stresses within the plate fuels using displacement data taken from a cut placed in the HPRR fuel plate. These results are verified against residual stress calculations obtained from the contour method. The inversion protocol used in this work utilizes two meshes to separately discretize the physics and parameter space. This allows a fine mesh to be used to fully resolve the physics and geometry of the forward problem. A coarser mesh is used to resolve the parameter space with spatially varying mesh density determined from a sensitivity analysis. The adaptive resolution of the parameter space essentially has the effect of regularization as it is designed to achieve the bias-variance tradeoff.
Sorghum is an attractive feedstock for biobased fuel and chemical production because it is familiar to farmers, naturally drought tolerant, and versatile as a food, feed, and fuel crop. Although sorghum is a promising feedstock, particularly in regions that experience drought stress, little is known about how drought conditions impact the ease of conversion of sorghum to fuels and products. This study combines agronomic field trials with a high-throughput experimental pipeline to explore the field performance and liquid biofuel (bisabolene) yields resulting from three sorghum types (photosensitive forage sorghum, optimized grain sorghum, and drought-resistant grain sorghum) grown under pre- and postflowering water limitations in two different California locations. Multiple drought treatments are compared to the control, as the timing (preflowering versus postflowering) of drought stress elicits different survival strategies and corresponding impacts on yield and composition. Forage-type sorghum maintained the highest biomass yields across all irrigation conditions and locations. Glucose and xylose yields resulting from ionic liquid pretreatment and enzymatic saccharification were not significantly impacted by irrigation treatments but differed by location and genotype. However, Rhodosporidium toruloides grown on the resulting plant hydrolysates unexpectedly produced higher titers of bisabolene for drought-stressed sorghum samples regardless of genotype.
The goal of this work is to assess the mechanistic bases of natural genetic variations in plant responses of photosynthesis to stress. To achieve this goal, we devised the Linkage Integration Hypothesis Testing (LIgHT) approach, comparing chromosomal locations of quantitative trait loci (QTLs) for multiple phenotypes to distinguish between hypothetical mechanisms. As a use case, we explored genetic variations in photosynthesis-related processes under chilling stress in recombinant inbred lines of cowpea ( Vigna unguiculata L. Walp.). We focused on photosynthesis-related parameters measurable in high throughput and indicative of proposed chilling responses, including the states of PSI and PSII, photoprotective non-photochemical quenching, PSII photodamage, and nyctinastic leaf movements (NLMs). The patterns of QTL linkages indicated that chilling stress tolerance is genetically controlled by avoiding PSII photodamage rather than PSI damage or NLMs. This model was validated in a separate experiment measuring the rates of PSII photodamage and repair. Additional linkages suggest that chilling-induced damage to PSII is controlled by the thylakoid proton motive force and redox state of PSII. This regulation appears to be modulated by thylakoid fatty acid composition, previously associated with the same genetic loci and now supported by broader mechanistic evidence. We propose that the LIgHT approach can be broadly applied to test mechanisms underlying genetic variations.
This is a presentation on the Closing the Loop Between In-situ Stress Complexity and EGS Fracture Complexity project by Lawrence Livermore National Laboratory, presented by Dr. Matteo Cusini. The project's objective was to employ a combination of high-fidelity simulations and true-triaxial block fracturing tests at high temperature to explore the intricate relationship between in-situ stress and hydraulic fracture patterns and better characterize the in-situ stress at Utah FORGE. This presentation was featured in the Utah FORGE R&D Annual Workshop on September 7, 2023. The workshop provided a valuable opportunity to explore the progress made in each of the 17 Research and Development projects funded under Solicitation 2020-1 which aim to enhance our understanding of the crucial factors influencing the development of Enhanced Geothermal Systems (EGS) reservoirs and resources.
A major challenge for sustainable food, fuel, and fiber production is simultaneous genetic improvement of yield, biomass quality, and resilience to episodic environmental stress and climate change. For Populus and other forest trees, quality traits involve alterations in the secondary cell wall (SCW) of wood for traditional uses, as well as for a growing diversity of biofuels and bioproducts. Alterations in wood properties that are desirable for specific end uses can have negative effects on growth and stress tolerance. Understanding of the diverse roles of SCW genes is necessary for the genetic improvement of fast-growing, short-rotation trees that face perennial challenges in their growth and development. Here, we review recent progress into the synergies and antagonisms of SCW development and abiotic stress responses, particularly, the roles of transcription factors, SCW biogenesis genes, and paralog evolution.
Camelina sativa (L.) Crantz is a low-input oilseed crop that has great potential in providing sustainable feedstock for biofuels and bioproducts. Climate change is threatening production of camelina with rising global temperatures. Elucidating the genetic response to high temperatures is essential for successful breeding of heat-tolerant camelina varieties. Here, we report a combinatorial approach to identifying candidate genes associated with heat stress by quantitative trait locus (QTL) mapping and comparative transcriptome profiling. A population of recombinant inbred lines (RILs) was grown in a controlled growth chamber under the high-temperature regimes for 14 days beginning at the onset of the reproductive stage. Several traits related to seed production were evaluated at maturity. The QTL analysis identified several regions with co-located traits on chromosomes 8, 10, and 12. Two RILs with contrasting phenotypic responses to heat stress were chosen for gene expression profiling via RNA sequencing. Multiple pathways and genes were found to be strongly affected by heat stress, and many genes expressed differently between the two RILs. Several genes identified within the QTL regions were considered strong candidates that may control heat tolerance during reproduction in camelina. These studies provide resources for future studies that may assist in improving the heat tolerance of camelina.
A computational method is developed for calculation of the stress field and interaction forces between dislocations and precipitates of arbitrary shape and distribution. The internal stress generated by precipitates due to coherency strain is implemented within the discrete dislocation dynamics (DDD) framework. The s-version finite element method (s-FEM), which models a precipitate of arbitrary shape using a local mesh is used to calculate coherency stress fields. The method facilitates meshing precipitate volumes of arbitrary geometry, and multiple local meshes can be superimposed at various positions of the global mesh. Accuracy and convergence conditions of the method are established. For a single precipiate, the method is shown to be 3.5 times faster than a standard FEM calculation for the same accuracy, and the gain in speed increases with the number of precipitates. The CRSS of spherical precipitates is found to be higher than disk-shaped precipitates of the same volume fraction.
Here we examine pressure build-up and decay in thermites upon impact ignition and interprets reactivity based on the holistic pressure history. The thermite is a mixture of aluminum (Al) combined with bismuth trioxide (Bi 2 O 3 ) powder. Four different Al particles sizes were examined that ranged from 100 nm to 18.5 μm mean diameter and for each size, two different Al powder treatments were examined: stress-altered compared to untreated, as-received Al powder. Stress-altered Al powders have been shown to be more reactive, such that the stress-altered Al powder thermites offer a metric for analyzing thermite reactivity in terms of pressure development compared to untreated Al powder. In a binary thermite system, multiple phase changes and interface chemistry influence the transient pressure response during reaction. Results reveal three key pressure metrics that need consideration specifically for thermite combustion: (1) delay time to peak pressure, (2) peak pressure, and (3) decay after peak pressure. Our experiments show that a lower peak pressure corresponds with higher thermite reactivity because aluminum consumption of oxygen generated by decomposing solid oxidizer reduces the peak pressure. Faster rates of reaction consume oxygen at higher rates such that pressure development becomes more limited than less reactive thermites and the result is a lower peak pressure. This conclusion is opposite of traditional studies using metal fuels with a gaseous environment that typically show higher peak pressures correspond with greater reactivity.
The information of when and where region-specific patterns in both mean and extreme temperatures leading to heat stress will emerge from the present-day climate variability is important to plan adaptation options, but to date studies on this issue still remain limited and fragmented. Here, we estimate the time of emergence (TOE) of temperature and wet-bulb temperature (Tw), a better indication of heat stress, using fine-scale, long-term regional climate model projections under the RCP2.6 and RCP8.5 scenarios across six different domains. Differently from previous studies, the TOE is determined using three methods applied on impact-relevant variables: two different signal-to-noise frameworks based on summer mean temperature and Tw and a statistical test to identify significant differences in daily extreme distributions. The TOE response to RCP2.6 and RCP8.5 with respect to the end of 20th century variability differs significantly regardless of which TOE metric is applied. For summer mean temperature, the land fraction reaching TOE is expected to exceed 90% by the 2050s under the RCP8.5, whereas the increase rate of land exposure to TOE tends to stagnate over time under the RCP2.6 so that more than 40% of land will not experience TOE by the end of the 21st century. Compared to temperature, the TOE of Tw is reached earlier in most of the wet tropics but is delayed in hot and dry regions because of the nonlinear response of Tw to humidity. For both temperature and Tw, the TOE appears earlier in regions with low baseline variability, such as in the tropics. Despite the uncertainties arising from the choice of TOE metrics, the vast majority of regions in Africa and southeast Asia experience TOE in the early 21st century under both the RCP2.6 and RCP8.5 scenarios, which stresses the urgent need for developing adequate adaptation strategies in these regions.
Chloroplasts can respond to stress and changes in the environment by producing reactive oxygen species (ROS). Aside from being cytotoxic, ROS also have signaling capabilities. For example, the ROS singlet oxygen ( 1 O 2 ) can initiate nuclear gene expression, chloroplast degradation, and cell death. Here to unveil the signaling mechanisms involved, researchers have used several 1 O 2 -producing Arabidopsis thaliana mutants as genetic model systems, including plastid ferrochelatase two (fc2), fluorescent in blue light (flu), chlorina 1 (ch1), and accelerated cell death 2 (acd2). Here, we compare these 1 O 2 -producing mutants to elucidate if they utilize one or more signaling pathways to control cell death and nuclear gene expression. Using publicly available transcriptomic data, we demonstrate fc2, flu, and ch1 share a core response to 1 O 2 accumulation, but maintain unique responses, potentially tailored to respond to their specific stresses. Subsequently, we used a genetic approach to determine if these mutants share 1 O 2 signaling pathways by testing the ability of genetic suppressors of one 1 O 2 producing mutant to suppress signaling in a different 1 O 2 producing mutant. Our genetic analyses revealed at least two different chloroplast 1 O 2 signaling pathways control cellular degradation: one specific to the flu mutant and one shared by fc2, ch1, and acd2 mutants, but with life-stage-specific (seedling vs. adult) features. Overall, this work reveals chloroplast stress signaling involving 1 O 2 is complex and may allow cells to finely tune their physiology to environmental inputs.
A Ginzburg–Landau model is developed that is adequate to describe a square-to-rectangle martensitic transition with associated shape-memory and superelastic properties. Using this model we study caloric effects in the vicinity of the martensitic transition induced by stress and we compare the case of a uniform uniaxial stress and the case of a non-uniform continuous distribution of stresses that produce bending of the material. The former case corresponds to an elastocaloric effect and the latter corresponds to a flexocaloric effect. The aim of the work is to quantitatively compare both cases, which we show must be accomplished in terms of equal amounts of exchanged mechanical work. It is then obtained that the flexocaloric effect is more efficient for low exchanged work but less efficient for large exchanged work.