SEARCH · Engineering Papers

Results for “SS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

All sources NASA NTRS DOE OSTI

NASA NTRS2013

Surface Ocean pCO2 Seasonality and Sea-Air CO2 Flux Estimates for the North American East Coast

Underway and in situ observations of surface ocean pCO2, combined with satellite data, were used to develop pCO2 regional algorithms to analyze the seasonal and interannual variability of surface ocean pCO2 and sea-air CO2 flux for five physically and biologically distinct regions of the eastern North American continental shelf: the South Atlantic Bight (SAB), the Mid-Atlantic Bight (MAB), the Gulf of Maine (GoM), Nantucket Shoals and Georges Bank (NS+GB), and the Scotian Shelf (SS). Temperature and dissolved inorganic carbon variability are the most influential factors driving the seasonality of pCO2. Estimates of the sea-air CO2 flux were derived from the available pCO2 data, as well as from the pCO2 reconstructed by the algorithm. Two different gas exchange parameterizations were used. The SS, GB+NS, MAB, and SAB regions are net sinks of atmospheric CO2 while the GoM is a weak source. The estimates vary depending on the use of surface ocean pCO2 from the data or algorithm, as well as with the use of the two different gas exchange parameterizations. Most of the regional estimates are in general agreement with previous studies when the range of uncertainty and interannual variability are taken into account. According to the algorithm, the average annual uptake of atmospheric CO2 by eastern North American continental shelf waters is found to be between 3.4 and 5.4 Tg C/yr (areal average of 0.7 to 1.0 mol CO2 /sq m/yr) over the period 2003-2010.

interannual variability↗

NASA NTRS2017

Development and Testing of Harpoon-Based Approaches for Collecting Comet Samples

Comets, having bright tails visible to the unassisted human eye, are considered to have been known about since pre-historic times. In fact 3,000-year old written records of comet sightings have been identified. In comparison, asteroids, being so dim that telescopes are required for observation, were not discovered until 1801. Yet, despite their later discovery, a space mission returned the first samples of an asteroid in 2010 and two more asteroid sample return missions have already been launched. By contrast no comet sample return mission has ever been funded, despite the fact that comets in certain ways are far more scientifically interesting than asteroids. Why is this? The basic answer is the greater difficulty, and consequently higher cost, of a comet sample return mission. Comets typically are in highly elliptical heliocentric orbits which require much more time and propulsion for Space Craft (SC) to reach from Earth and then return to Earth as compared to many asteroids which are in Earth-like orbits. It is also harder for a SC to maneuver safely near a comet given the generally longer communications distances and the challenge of navigating in the comet's, when the comet is close to perihelion, which turns out to be one of the most interesting times for a SC to get close to the comet surface. Due to the science value of better understanding the sublimation of volatiles near the comet surface, other contributions to higher cost as desire to get sample material from both the comet surface and a little below, to preserve the stratigraphy of the sample, and to return the sample in a storage state where it does not undergo undesirable alterations, such as aqueous. In response to these challenges of comet sample return missions, the NASA Goddard Space Flight Center (GFSC) has worked for about a decade (2006 to this time) to develop and test approaches for comet sample return that would enable such a mission to be scientifically valuable, while having acceptably low risk and an affordable cost. A harpoon-based approach for gathering comet samples appears to offer the most effective way of accomplishing this goal. As described below, with a decade of development, analysis, testing and refinement, the harpoon approach has evolved from a promising concept to a practical element of a realistic comet sample return mission. Note that the following material includes references to videos, all of which are contained in different sections of the video supplement identified in the references. Each video will be identified as "SS##", where "SS" means the supplement section and "##" will be the number of the section.

Purves, Lloyd↗

NASA NTRS2020

Corrosion Behavior of Stainless Steel 304 and Nickel 625 Under Iodine Vapor at 300 °C

The chemical, structural, and microstructural behavior of stainless steel 304 (SS 304) and nickel 625 (Ni 625) were probed after exposure to iodine vapor laminar flow at 300 °C. This work was conducted in support of the development of in-space propulsion utilizing iodine as a propellant. The kinetics of corrosion was measured in a custom-built iodine-compatible thermogravimetric analyzer rig at 300 °C in which samples were exposed to an iodine laminar vapor flow of 1 mg/min (carried by 20 mL/min argon gas) for up to 31 days. Samples were characterized after the experiment by X-ray diffraction, electron microscopy, energy dispersive X-ray spectroscopy, and dynamic secondary ion mass spectrometry. All samples formed scales consisting mainly of metal oxyiodides showing different chemistry, microstructure, and crystalline phases. The paralinear rate law best describes the kinetics of oxidation of the samples. SS 304 exhibited slightly slower kinetics of oxidation (106±3·10(exp –5) mg/sq.cm/day) than Ni 625 (122±3·10(exp –5) mg/sq.cm/day) in the low-oxygen and low-water environment.

Chemistry and Materials↗

NASA NTRSDate not supplied

A Combined Al-Mg/Pb-Pb Age of the Solar System

Astrophysical models of planet formation and protoplanetary disk evolution demand precise and accurate timing of the sequence of events in the solar nebula, relative to a time t=0, usually taken to be during the short epoch of CAI (Ca-rich, Al-rich inclusion) formation. Most CAIs formed withlive26Al (mean-life τ26= 1.034 Myr [1]), with an abundance 26Al/27Al ≈ (26Al/27Al)SS= 5.23 × 10-5[2]. We adopt this as the widespread level of 26Al in the solar nebula at t=0. Assuming spatial homogeneity of 26Al, an inclusion that had less 26Al, (26Al/27Al)0, formed a time Δt26= τ26ln[(26Al/27Al)SS/ (26Al/27Al)0] after t=0.These ages are typical precise to within ±0.1 Myr. Igneous bulk meteorites and inclusions can be relatively dated by the Al-Mg chronometer, but only ifΔt26<6 Myr. The Pb-Pb system is useful as a longer relative chronometer. It yields absolute ages tPb using 207Pb/206Pb, 206Pb/204Pb, and 238U/235U ratios measured indifferent portions of a sample, assuming certain half-lives [4]. These absolute ages are uncertain to within ±9 Myr due to uncertainties in the 235U half-life[3], but times of formation ΔtPb= tCAI–tPb relative to t=0, are more precise(±0.5Myr),iftCAI can be found. Here, tCAI means the Pb-Pb age that would be measured in CAIs using the half-lives the community typically uses, if they achieved isotopic closure at t=0. Unfortunately, direct Pb-Pb dating of CAIs has not definitively determined tCAI. Based on four CAIs with canonical (26Al/27Al)0,[5,6] found tPb= 4567.30 ± 0.16 Myr. No other CAI ages with measured 238U/235U have been reported in the refereed literature, but there are hints of other CAIs with ages tPb= 4568.0 ± 0.2 Myr [7] and tPb= 4568.3 ± 0.2 Myr [8].It is unclear whether anyof these igneous type B CAIs isotopically closed at t=0 or represents tCAI. Instead of measurements, we advocate finding tCAI by minimizing the discrepancies between the Al-Mg and Pb-Pb chronometers. Assuming Δt26=ΔtPb, we find the implied t’CAI= tPb+Δt26, then define t*CAIas the weighted mean of the t’CAI. t*CAIis the best guess for the Pb-Pb age of t=0; the assumption of homogeneity is justified if the t’CAI cluster within errors around t*CAI. This statistical approach is similar to, but improves on, that of[9]. We find t*CAI= 4568.73 ± 0.16 Myr. Below we discuss our methodology and the implications of this age for CAIs, 1.4 Myr older than the reported and typically used age 4567.30±0.16 Myr. Methods: We base our estimate of t*CAIon five achondrites for which published (26Al/27Al)0and Pb-Pb ages exist: the quenched angrites D’Orbigny, Sahara 99555 (SAH 99555), and Northwest Africa (NWA) 1670; the pseudo-eucrite Asuka 881394; and the inner disk achondrite. All are “NC” (non-carbonaceous) achondrites that likely cooled quickly enough that the Al-Mg and Pb-Pb systems achieved isotopic closure simultaneously. We also considered the “CC” (carbonaceous chondrite-like) achondrites NWA 2796 and NWA 6704, butdo not include them in our fit. Al-Mg and Pb-Pb seem not to have closed simultaneously, possibly because formation in the outer disk from volatile-rich composition led to slower cooling. Of the 8 chondrules from NWA 5697 measured by [20,21], we also consider the 4 for which 238U/235U was measured: 2-C1, 5-C2, 3-C5, 11-C1.Depending on their post-formation thermal histories, the Al-Mg and Pb-Pb systems in chondrules may or may not have closed simultaneously. Table 1: (26Al/27Al)0, Pb-Pb ages of selected samplesSample(26Al/27Al)0/ 10-6RefPb-PbRefD’Orbigny3.98±0.15104563.43±0.19♮10-12SAH 995553.64±0.18104563.88±0.2712NWA16705.92±0.59104564.39±0.24*10Asuka 88139413.1±0.5613-154564.98±0.1715NWA 73253.03±0.14164563.4±2.616NWA 27963.94±0.16174562.89±0.5917NWA 67043.03±0.14184562.76±0.26192-C17.56±1.53204567.57±0.56*215-C27.04±1.51204567.54±0.52*213-C58.85±1.83204566.20±0.63*2111-C15.55±1.84204565.84±0.72*21*regression based on one subset of data points ♮weighted mean of two datasets Pb-Pb ages are proportional to the intercept of the line formed by linear regression of 207Pb/206Pb vs. 206Pb/204Pb data from various washes, leachates and residues of acid dissolution of a sample. Because contamination by terrestrial or primordial Pb is pervasive, some fractions must be excluded from regressions to ensure a fit with acceptable mean squares weighted deviation (MSWD). Usually points are excluded based on low [Pb], or low 206Pb/204Pb ratio(low radiogenic component), with single outliers identified [11,12,15,16,17]. In the starred examples (Table 1)and the case of 3 CAI Pb-Pb ages [5], up to half the points were excluded solely because did not fit a pre-determined line. This approach is vulnerable to confirmation bias and produces fits with low MSWD and too-low Pb-Pb age uncertainty. Regressing the same data points as [10], were produce the Pb-Pb age of NWA 1670 of 4564.39±0.24 Myr. But selecting other combinations of data points, other, equally valid, isochrons yield ages from 4563.77±0.21 Myr to 4564.64±0.23 Myr. Similar arguments apply to the Pb-Pb isochrons built by [21] for chondrules 2-C1 (we find 4567.33±0.44 to 4567.85±0.46 Myr), 5-C2 (4566.84±0.53 to 4567.70±0.44 Myr), 3-C5 (4565.84±0.54to 4567.04±0.54)and 11-C1 (4565.36±0.51 to 4565.74±0.45 Myr). Our adopted ages for these and NWA 1670 are listed in Table 2.Table 2. tCAI estimated from various components, using our regressions for the chondrules & NWA 1670.SampleΔt26(Myr)tPb(Myr)t’CAI(Myr)D’Orbigny5.05±0.044563.43±0.194568.48±0.19SAH 995555.14±0.054563.88±0.274569.02±0.27NWA16704.64±0.104564.21±0.634568.85±0.67Asuka 8813943.81±0.044564.98±0.174568.79±0.17NWA 73255.33±0.054563.4±2.64568.7±2.6NWA 27965.06±0.044562.89±0.594567.95±0.59NWA 67045.29±0.134562.76±0.264568.05±0.292-C12.00±0.214567.59±0.704569.59±0.725-C22.07±0.224567.23±0.914569.30±0.933-C51.84±0.214566.44±1.124568.28±1.1411-C12.32±0.344565.52±0.664567.84±0.73achondrite4568.72±0.16chondrules4568.76±0.58combined4568.73±0.16A weighted average of the five NC achondrites(or just D’Orbigny, SAH 99555 and Asuka 881394)yields t*CAI= 4568.72 ± 0.16Myr. All are consistent with this value to within 1.8σ, and MSWD=1.5. Including the 4 U-corrected chondrules, t*CAI= 4568.73± 0.16Myrwith MSWD=1.66, which is statistically significant. All chondrules and NC achondrites are consistent with this to within 1.8σ, (Figure 1).Figure 1. Al-Mg formation times after t=0 vs. Pb-Pb ages. The five NC achondrites and four chondrules are consistent with a Pb-Pb age of t=0 of 4568.7 Myr. Discussion: The data from achondrites and chondrules are consistent with a single Pb-Pb age at t=0, justifying the assumption of 26Al homogeneity. The age, 4568.7 Myr, is ≈1.4 Myr older than the commonly accepted Pb-Pb age of CAIs that formed with canonical 26Al/27Al at t=0 [3]. Others have interpreted the discrepancy to signify 26Al heterogeneity in the CAI-forming region[5,21]. We suggest instead that CAIs were exposed to transient heating events that reset the Pb-Pb system without disturbing the Al-Mg system. Notably, chondrules typically experienced transient heating at these times in the nebula [22]. If so, direct measurements of CAIs will not yield as reliable a Pb-Pb age of t=0 as statistical approaches like this and that of [9].References:[1] Auer et al. 2009. [2] Jacobsen, B et al. 2008, EPSL 272, 353-364. [3] Tissot, Fet al. 2017, GCA 213, 593-617.[4] Villa, I et al. 2016, GCA 172, 387-392.[5] Amelin, Y et al. 2010, EPSL 300, 343-350.[6] Connelly, Jet al. 2012, Science 338, 651.[7] Bouvier, Aet al. 2011, LPICo 1639, 9054. [8] Bouvier, Aand Wadhwa, M2010, Nat Geosci 3, 637-641.[9] Nyquist, Let al. 2009, GCA 73, 5115-5136.[10] Schiller et al. 2015. [11] Wadhwa & Brennecka 2012. [12] Tissot et al. 2017. [13] Nyquist et al. 2003. [14] Wadhwa et al. 2009. [15] Wimpenny et al. 2019, GCA 244, 478-501.[16] Koefoed et al. 2016, GCA 183, 31-45. [17] Bouvier, A et al. 2011, GCA 75, 5310-5323. [18] Sanborn, Met al. 2019, GCA 245, 577-596. [19] Amelin, Yet al. 2019, GCA 245, 628-642.[20] Bollard, Jet al. 2017, Sci Adv 3 ,e1700407. [21] Bollard, Jet al. 2019, GCA 260, 62-83.[22] Villeneuve, J et al. 2009, Science 325, 985

S. J. Desch↗

NASA NTRS2020

Evaluation of a Method to Retrieve Temperature and Wind Velocity Profiles of the Venusian Nightside Mesosphere from Mid-Infrared CO2 Absorption Line Observed by Heterodyne Spectroscopy

We evaluated a method for retrieving vertical temperature and Doppler wind velocity profiles of the Venusian nightside mesosphere from the CO2 absorption line resolved by mid-infrared heterodyne spectroscopy. The achievable sensitive altitude and retrieval accuracy were derived with multiple model spectra generated from various temperature and wind velocity profiles with several noise levels. The temperature profiles were retrieved at altitudes of 70–100 km with a vertical resolution of 5 km and a retrieval accuracy of ±15 K. The wind velocity was also retrieved at an altitude of approximately 85 km with a vertical resolution of 10 km and a retrieval accuracy of ± 25–50 m/s. In addition, we studied an event and applied our method to spectra obtained by the HIPWAC instrument attached to the NASA/IRTF 3-m telescope on May 19–22, 2012. Retrieved wind velocities in a latitude of 33° S at 3:00 LT were interpreted as subsolar-to-antisolar (SS-AS) flows at altitudes of 84 ±6 km and 94 ±7 km, and they were stronger than expected. This result suggested that the transition between the retrograde super rotational zonal (RSZ) wind and SS-AS flow may occur at altitudes below 90 km which previously was predicted to be the transition region. This work provides a basis for our analysis of further observations obtained by a mid-infrared heterodyne spectrometer MILAHI attached to the Tohoku University 60-cm telescope at Haleakalā, Hawaii.

Venus↗

NASA NTRSDate not supplied

X-Ray Computed Tomography During Preliminary Examination of Apollo Drive Tube 73001

Introduction: Starting in 2019, the Apollo Next Generation Sample Analysis (ANGSA) Program has enabled consortium studies of specially curated Apollo samples that were previously unstudied (or under studied). This began with unsealed core tube 73002 [1,2] that is the upper part of a station 3 double drive tube. More recently the pro-gram extended to the study of a variety of frozen Apollo 17 samples [3], as well as the gas extraction [4] and dis-section [5] of 73001, the lower half of the station 3 double drive tube, that was sealed under vacuum on the Moon. In this abstract we will examine the role of X-ray Computed Tomography (XCT) during the preliminary examination process for sealed core 73001, including: (1) engineering scans to aid in understanding the gas extraction process, whole-core scanning prior to opening to inform extrusion and dissection work, and (3) individual particle scanning to characterize rock fragment lithologies for follow on studies. Methodology: Sample 73001 is a 33 cm long, 4 cm diameter regolith sample collected inside a drive tube (~1 mm aluminum walls). That drive tube was sealed inside a 0.5 mm thick stainless steel (SS) Core Sample Vacuum Container (CSVC). XCT scans for engineering purposes were done on the Nikon XTH 320 system at Johnson Space Center using the 225 kV multi-metal reflection source at 215 kV, 179 A, and a 38.49 m voxel size. Individual >4 mm particles separated from the core during processing (then triply sealed in Teflon bags) were also scanned at JSC using the 180 kV source at 90 kV, 33 A, and a 2.98 – 10.65 m voxel size. Whole-core scans were done at the University of Texas High-Resolution X-ray Computed Tomography Facility (UTCT) on the 225 kV reflection source on the North Star Imaging cabinet XCT system. These scans included: (1) a series of 9 overlapping super-resolution scans each covering a ~4 cm length of the tube at 190 kV, 180 µA, and a 12.9 µm voxel size and (2) a lower resolution continuous helical scan of the entire core at 190 kV, 180 µA, and a 51.8 µm voxel size. Progress and Results: Before piercing and extracting the gas from sample 73001, an XCT scan of the bottom portion of the CSVC was used to confirm the location of the Teflon cap on the inner drive tube, to ensure it was not accidentally pierced during gas extraction. Similarly, after piercing, the bottom and top portions of the CSVC were scanned in order to capture engineering knowledge about the results of the piercing process, as well as the metal knife edge vacuum seal (SS into In-Ag alloy). Both scans will provide constraints on future work of this type, particularly for samples collected during the Artemis mission. Another finding from these "engineering" scans was that the device in the drive tube that immobilizes the regolith (the keeper) was not seated in the tube properly. This meant that (1) the drive tube could not be removed from the CSVC for the trip to UTCT, and (2) the procedure for opening and extruding the drive tube had to be modified. Had either of these things not been known prior to opening the CSVC, it could have led to an inability to XCT scan the whole core at high resolution and/or potential disruption of the core stratigraphy during extrusion. At UTCT, the entire length of the core was scanned at high resolution (12.9 microns per voxel). This scan serves multiple purposes: (1) A lower resolution (and uncorrected) version of these scans stitched together was used to help inform the processors of potential pitfalls during extrusion and dissection; and (2) the full resolution corrected data will serve as the permanent in situ record of the stratigraphy of the sample and will enable future researchers to perform a variety of analyses. So far, 92 of the 121 >4 mm particles separated during dissection pass 1 of sample 73001 have been individually scanned. These scans clearly show the lithology of each particle while keeping the particles in pristine condition. Because of the dust adhering to particle exteriors it would otherwise be impossible to determine lithologies in a non-contaminating way. Thus far the types of lithologies seen in sample 73001 (e.g., regolith breccias, impact-melt breccias, agglutinates, and basalts) are similar to those previously identified in sample 73002 [2]. By the time of the meeting, all particles from all 3 dissection passes will have been scanned and statistics on the different lithologies in 73001 compiled. References: [1] Shearer et al. (2020) 51st LPSC, abstract 1181. [2] Zeigler et al. (2020) 51st LPSC, abstract 3023. [3] Kent et al. (2022) This Volume. [4] McDonald et al. (2022) European Lunar Symposium. [5] Gross et al (2022) This volume.

Moon↗

NASA NTRSDate not supplied

X-Ray Computed Tomography of Apollo Drive Tube 73001 as Part of the Apollo Next Generation Sample Analysis Program

Introduction: Starting in 2019, the Apollo Next Generation Sample Analysis (ANGSA) Program has enabled consortium studies of specially curated Apollo samples that were previously unstudied (or under studied). This program was intended as a participating scientist program for these Apollo samples, as well as a preparation for upcoming lunar sample return missions (e.g., Artemis). The work began with studies of unsealed core tube 73002 [1,2] that is the upper ~35 cm of an Apollo 17 double drive tube (~70 cm total depth) collected on the landslide deposit near Lara Crater at Station 3 in the Taurus Littrow Valley. More recently the program extended to the study of a variety of frozen Apollo 17 samples [3], as well as the gas extraction [4] and dissection [5] of 73001, the lower half of the station 3 double drive tube. Sample 73001 was sealed under vacuum on the Moon in a Core Sample Vacuum Container (CSVC). In this abstract we will examine the role of X-ray Computed Tomography (XCT) during the preliminary examination process for sealed core 73001, including: (1) engineering scans to aid in understanding the gas extraction process, (2) whole-core scanning prior to opening to inform extrusion and dissection work, and (3) individual particle scanning to characterize rock fragment lithologies for follow on studies. Methodology: Sample 73001 is a 33 cm long, 4 cm diameter regolith sample collected inside a lunar drive tube (~1 mm aluminum walls). That drive tube was sealed inside a 0.5 mm thick stainless steel (SS) CSVC. XCT scans for engineering purposes were done on the Nikon XTH 320 system at Johnson Space Center using the 225 kV multi-metal reflection source at 215 kV, 179 A, and a 38.49 m voxel size. Individual >4 mm particles separated from the core during processing (then triply sealed in Teflon bags) were also scanned at JSC using the 180 kV source at 90 kV, 33 A, and a 2.98 – 10.65 m voxel size. Whole-core scans were done at the University of Texas High-Resolution X-ray Computed Tomography Facility (UTCT) on the 225 kV reflection source on the North Star Imaging cabinet XCT system. These scans included: (1) a series of 9 overlapping super-resolution scans each covering a ~4 cm length of the tube at 190 kV, 180 µA, and a 12.9 µm voxel size and (2) a lower resolution continuous helical scan of the entire core at 190 kV, 180 µA, and a 51.8 µm voxel size. Progress and Results: Before piercing and extracting the gas from sample 73001, an XCT scan of the bottom portion of the CSVC was used to confirm the location of the Teflon cap on the inner drive tube and whether there was an “air” gap between the Teflon cap and the CSVC. This was to ensure the Teflon cap (which immobilized the soil inside the drive tube) was not accidentally pierced during gas extraction. Similarly, after piercing, the bottom and top portions of the CSVC were scanned in order to capture engineering knowledge about the results of the piercing process, as well as the metal knife edge vacuum seal (SS into an In-Ag alloy). Both scans will provide constraints on future work of this type, both for the design of tools used on the lunar surface during Artemis, as well as how we open future samples of this type. An unexpected finding from these engineering scans was that the device in the drive tube that immobilizes the regolith (the keeper) was not seated in the tube properly. This meant that (1) the drive tube could not be removed from the CSVC for the trip to UTCT, and (2) the procedure for opening and extruding the drive tube had to be modified. Had either of these things not been known prior to opening the CSVC, it could have led to an inability to XCT scan the whole core at high resolution and/or potential disruption of the core stratigraphy during extrusion. At UTCT, the entire length of the core was scanned at high resolution (12.9 microns per voxel). This scan serves multiple purposes: (1) A lower resolution (and uncorrected) version of these scans stitched together was used to help inform the processors of potential pitfalls during extrusion and dissection (voids, angular fragments at the edges of the sample, etc.); and (2) the full resolution corrected data will serve as the permanent in situ record of the stratigraphy of the sample and will enable future researchers to perform a variety of analyses. All 121 >4 mm particles separated during dissection pass 1 of sample 73001 have been individually scanned. These scans clearly show the lithology of each particle while keeping the particles in pristine condition (they are individually triply bagged in Teflon within our N2 purged processing cabinets). Because of the dust adhering to particle exteriors, it would otherwise be impossible to determine lithologies in a non-contaminating way. Thus far the types of lithologies seen in sample 73001 (e.g., regolith breccias, impact-melt breccias, agglutinates, and bas-alts) are similar to those previously identified in sample 73002 [2]. By the time of the meeting, all particles from all 3 dissection passes will have been scanned and statistics on the different lithologies in 73001 compiled. References: [1] Shearer et al. (2020) 51st LPSC, abstract 1181. [2] Zeigler et al. (2020) 51st LPSC, abstract 3023. [3] Kent et al. (2022) This Volume. [4] McDonald et al. (2022) European Lunar Symposium. [5] Gross et al (2022) This volume.

Moon↗

NASA NTRSDate not supplied

Interlaminar R-Curve Effects in Thermoplastic Composites: Experiments and Model Correlations

The interlaminar fracture behavior of thermoplastic composites under Mode-I and Mode-II static loading is investigated in this research. The material system under consideration is a carbon fiber reinforced low melt semi-crystalline resin TC1225 LMPAEK T700G (T700/LMPAEK)†. Characterization experiments were conducted to measure the load-displacement response, peak load, and propagation of delamination from a pre-implanted Kapton® insert. The Mode-I response was characterized using a double cantilever beam (DCB) test according to the ASTM D5528-22 standard. It was observed that the propagation exhibited significant resistance to delamination growth, i.e., an R-Curve effect. The test data indicated that the steady-state fracture toughness, G SS I , was approximately twice the mean initiation fracture toughness, G Ic . The Mode-II response of an end notch flexure (ENF) specimen tested according to the ASTM D7905-19 standard exhibited an unexpected stable behavior upon attaining peak load. Prior to attaining peak load, the Mode-II response exhibited some non-linearity, which may be attributed to nonlinear bulk material response, e.g., hyper-elasticity, viscoelasticity, plasticity, etc., and potentially friction at the load/support rollers and R-Curve effects. Finite element models based on the Cohesive Zone Method (CZM) and the Virtual Crack Closure Technique (VCCT) were used to predict the DCB and ENF specimen responses. DCB analysis results obtained using G SS I predicted propagation consistent with experimental data. However, results obtained with the as characterized G Ic were inaccurate in predicting delamination growth onset and peak load. ENF analysis results obtained with the as-characterized Mode-II fracture toughness, G IIc , were inaccurate in predicting the peak load and propagation. Hence, R-Curve effects were included in both DCB and ENF simulations, which enabled improved predictions. The experimentally determined Mode-I R-Curve was used for the DCB simulations, whereas an R-Curve was derived for Mode-II assuming that the change in compliance of the specimen was associated with crack growth only.

Prabhakar M Rao↗

NASA NTRSDate not supplied

Interlaminar R-Curve Effects in Thermoplastic Composites: Experiments and Model Correlations

Prabhakar Rao↗

DOE OSTI2021

Steep slope transistors with threshold switching devices

A steep-slope (SS) field effect transistor (FET) including a FET having a source region and a drain region, and a threshold switching device in direct contact with the source region or the drain region of the FET. Fabricating the steep-slope (SS) field effect transistor (FET) includes fabricating an AlGaN/GaN metal-insulator-semiconductor high electron mobility transistor (MIS-HEMT) having a source region and a drain region, depositing a first electrode layer directly on the source region or the drain region, depositing a threshold switching layer directly on the first electrode layer, and depositing a second electrode layer directly on the threshold switching layer.

Huang, Xuanqi↗

DOE OSTI2022

Friction Stir Welding – an Advanced Approach to Repair Nuclear Power Plant Components

Solid phase joining technique friction stir welding (FSW) has been shown to mitigate helium-related issues in fusion welding of irradiated steels. Here, we present detailed characterization results of the first friction stir weld of an irradiated 304L stainless steel (SS) coupon contained 5.2 atomic parts per million (appm) helium. Scanning electron microscopy (SEM) was used to characterize a cross section specimen removed from the friction stir weld. No macro helium induced crack was observed at the analyzed cross-section, and only 1 – 1.5 µm size pores were found in the stir zone (SZ) and the thermal-mechanical affected zone (TMAZ). Moreover, some minor helium aggregations (Maximum ~20 µm in length) appeared along grain boundaries inside the TMAZ. Thereafter, miniature tensile specimens were extracted from the SZ, TMAZ and heat affected zone (HAZ), and base metal (BM) and tested. All welded specimens showed high total elongations (> 60%) and strengths (> 75% BM strengths). Overall, the weld made by FSW showed much better results comparing with traditional fusion welding on irradiated SS.

Tang, Wei↗

DOE OSTI2020

Challenges and Solutions in Operation and Lay-Up of the Modular Caustic- Side Solvent Extraction Unit - 20078

The Modular Caustic-Side Solvent Extraction (CSSX) Unit (MCU) was designed and constructed to provide interim salt waste processing so that the Liquid Waste Disposition Program (LWDP) could continue waste removal and tank closure until start-up of the Salt Waste Processing Facility (SWPF). MCU processes Clarified Salt Solution (CSS), or salt solution (SS) that has undergone actinide removal/filtration, to produce two waste streams: the cesium laden Strip Effluent (SE), which is incorporated into glass at the Defense Waste Processing Facility (DWPF), and the cesium depleted Decontaminated SS (DSS), which is incorporated into grout at the Saltstone Production Facility (SPF). MCU completed start-up in 2008 with an initial operating life of 3 years and design life of 5 years. Prior to reaching the end of the design life, multiple critical components were upgraded and/or replaced to mitigate risks associated with any delays in SWPF start-up. During the remainder of operation (until June 2019), MCU was challenged to maximize processing with minimal additional modifications to repair/improve aging infrastructure, while maintaining low levels of risk to workers and the environment. Notable challenges during the extended operating life of the facility involved both mechanical and operational issues. Two of the most significant issues were the increased frequency of Process Vessel Ventilation (PVV) High Efficiency Particulate Air (HEPA) filter change-outs and the biofouling of the SE coalescer (SEC). The major impacts of both issues were that replacement of these components 1) resulted in high exposure to workers, and 2) required substantial downtime, thus hindering achievement of processing goals. PVV HEPA filter replacements are required based on dose rate and differential pressure (dP) limits. After introducing a higher-curie feed to MCU, the operating time between change outs was reduced by approximately half. SEC replacements are required based on dP limits. After restarting from an extended outage, the operating life of the SEC was significantly reduced by more than half due to biofouling. As a result of extensive troubleshooting and process improvements, the facility was able to recover performance and extend the operating life of the PVV HEPA filters and the SEC media. Through troubleshooting both of these issues, the facility was also able to learn from prior experience and adapt in order to minimize down time and maintain throughput. Although the facility took advantage of short periods of downtime to perform nonintrusive troubleshooting and minor corrective/preventative maintenance activities, longer outages were periodically required for corrective maintenance involving process cell entry. During these outages, remote tools and specialized shield plates were employed to minimize dose to workers. Mock-ups of non-routine maintenance activities were critical to early identification of potential issues and improvements, which shortened outage duration. Consistent with the facility's operational strategy, evolutions needed for MCU layup were identified and sequenced to ensure safe conditions within the facility, meet pre-defined criteria for lay-up configuration, and protect workers, while minimizing the impact to SWPF integration. De-inventory and flushing of process areas was prioritized so that the total residual inventory was reduced as efficiently as possible. This paper discusses lessons learned and best practices from troubleshooting unique issues, performing complex maintenance activities, and implementing a layup strategy that best supports the overall system mission. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2023

The Elevated-Temperature Cyclic Properties of Powder Metallurgy-Hot Isostatic Pressed 316H and 316L Stainless Steel

Section III, Division 5 of the American Society of Mechanical Engineers Boiler and Pressure Vessel Code covers construction rules for elevated-temperature nuclear components. Microreactor developers have expressed a need for advanced manufacturing processes to fabricate microreactor components to reduce manufacturing costs. Components fabricated using manufacturing processes other than conventional techniques are not currently qualified in Section III, Division 5. An expeditious approach to qualifying an advanced manufacturing process for alloys whose wrought-product form is already qualified in Division 5 is to demonstrate the resultant properties from the advanced manufacturing process are equivalent or superior to the wrought-product form. Powder metallurgy-hot isostatic pressing (PM-HIP) is a mature technology that offers many advantages that are attractive to the microreactor industry. Preliminary data show that the elevated-temperature creep-fatigue properties of PM-HIP 316H stainless steel (SS) are reduced compared to the Wrought 316H SS, which is qualified in Section III, Division 5. Work is ongoing to identify the mechanisms responsible for the reduced creep-fatigue properties and to establish acceptance criteria to confirm the adequacy of the component for service.

316H stainless steel↗

DOE OSTI2023

Super p-sulfur cathodes for quasi-solid-state lithium-sulfur-batteries

Lithium-Sulfur (Li-S) batteries have become a promising candidate to meet the current energy storage demand, with its natural abundance of materials, high theoretical capacity of 1672 mAhg-1, high energy density of 2600 Whkg-1, low cost and lower environmental impact. Sulfide based solid state electrolytes (SSEs) have received greater attention due to their higher ionic conductivity, compatible interface with sulfur-based cathodes, and lower grain boundary resistance. However, the interface between SSEs and cathodes has become a challenge in all solid-state Li-S batteries due to the rigidity of the participating surfaces. A hybrid electrolyte containing SSE coupled with a small amount of ionic liquid, was essential to improve the interface contact of the SSE with the electrodes. Coating-based cathodes were successfully fabricated using water-based carboxymethyl cellulose (CMC) solution and Styrene butadiene rubber (SBR) as the binder with low sulfur loading (0.70 mgcm-2) as well as high sulfur loading (4.0 mgcm-2). Solid-state composite powder-based cathodes pressed onto SSE (loading 4.0 mgcm-2) with enhanced electronic and ionic conductivity were fabricated with Super P: Sulfur (SP:S) and SSE. Ionic Liquids (IL) prepared using Lithium bis(trifluoromethyl sulfonyl)imide (LiTFSI) as salt, with premixed pyrrolidinium bis(trifluoromethyl sulfonyl)imide (PYR) as solvent and 1,3-dioxolane (DOL) as diluent were used to wet both SSE-electrode interfaces. The effect of IL dilution, co-solvent amount, LiTFSI concentration, C rate at which the batteries are tested and the effect of SSE inside the cathode, were systematically studied and optimized to develop a quasi-solid-state electrolyte Li-S battery (QSSLSB) with higher capacity retention and cyclability. LiTFSI (2M) dissolved in PYR:DOL(1:1) found to be optimum IL combination for low sulfur loading QSSLSBs reaching 500 mAh/g after 100 cycles while LiTFSI (3M) in PYR:DOL(1:3) was the optimum IL concentration for higher loading QSSLSBs reaching 400 mAh/g after 100 cycles. This work reports promising results of QSSLSB based on novel Li6PS5F0.5Cl0.5 Li-argyrodite solid-state electrolyte (SSE) with minute amount of IL, Super P-Sulfur (SP:S) cathode, and Li-anode. It also offers a new insight into the intimate interfacial contacts between the SSE and carbon-sulfur cathodes, which will be critical for improved electrochemical performance of quasi-solid-state lithium-sulfur batteries with high sulfur loading in the future.

25 ENERGY STORAGE↗

DOE OSTI2022

MRP: Qualification of Powder Metallurgy Hot Isostatic Pressed (PM HIP) Materials for Elevated-Temperature Nuclear Construction

PM HIP is a mature technology that offers many advantages that are attractive to the microreactor industry. The elevated-temperature creep-fatigue properties of the PM HIP 316H SS bar that has been characterized are reduced compared to the wrought material. Work will be carried out in fiscal year 2022 to identify the mechanisms responsible for the reduced creep-fatigue properties. Confirmatory testing of optimized material will be conducted to demonstrate long-term PM HIP properties comparable to the wrought-product form. The lessons learned for PM HIP 316H SS will be applied to the procurement and confirmatory testing of PM HIP Alloy 800H.

316H stainless steel↗

DOE OSTI2023

In situ embedment of type K sheathed thermocouples with directed energy deposition

Advanced nuclear reactor systems require new technologies for heat transfer and system monitoring. Additive manufacturing (AM) offers the design flexibility to allow in-situ sensor embedment through smart manufacturing for real-time monitoring, and performance of these systems. Here, this study focuses on experiments investigating the feasibility of in-situ sensor embedment using directed energy deposition (DED). Type K thermocouples are embedded into 316L stainless steel (SS) samples using two different configurations (e.g., exposed and embedded tips) and two designs (e.g., flush to substrate) within an AM base. Embedded sensor samples are analyzed via in-situ measurements and high-temperature performance validation tests at 350ºC and 900ºC. Temperature performance results at both temperature tests show good agreement with manufacturer specifications proving that these sensors could still capture accurate temperature readings after in-situ embedment during DED processing. An additional optimization experiment was conducted on the exposed tip configuration using a surrogate thermocouple to improve tolerances and the embedment process. Results improved tolerances, lower porosity, smaller gaps between the sensor and base, and better junction contact for the sensor. Although further optimization of this embedment strategy is necessary to improve the structural stability and tolerances within the component, this research strategy provides a proof-of-feasibility for DED embedment with commercial sheathed thermocouples. This research provides early impact on embedment of sensor for multiple materials and complex geometric components..

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

DOE OSTI2023

Evidence for current suppression in superconductor–superconductor bilayers

Superconducting radio frequency (SRF) cavities, which are critical components in many particle accelerators, need to be operated in the Meissner state to avoid strong dissipation from magnetic vortices. For a defect-free superconductor, the maximum attainable magnetic field for operation is set by the superheating field, B sh , which directly depends on the surface current. In heterostructures composed of different superconductors, the current in each layer depends not only on the properties of the individual material, but also on the electromagnetic response of the adjacent layers through boundary conditions at the interfaces. Three prototypical bilayers [Nb 1–x Ti x N (50 nm)/Nb, Nb 1–x Ti x N (80 nm)/Nb, and, Nb 1–x Ti x N (160 nm)/Nb] are investigated here by depth-resolved measurements of their Meissner screening profiles using low energy muon spin rotation (LE-µSR). From fits to a model based on London theory (with appropriate boundary and continuity conditions), a magnetic penetration depth for the thin Nb 1–x Ti x N layers of λ Nb 1–x Ti x N = 182.5(31) nm is found, in good agreement with literature values for the bulk alloy. Using the measured λ Nb 1–x Ti x N , the maximum vortex-free field, B max , of the superconductor-superconductor (SS) bilayer structure was estimated to be 610(40) mT. The strong suppression of the surface current in the Nb 1–x Ti x N layer suggests an optimal thickness of ~ 1.4λ Nb 1–x Ti x N = 261(14) nm.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2025

HPC for Optimizing Process Parameters to Control Material Evolution in Seamless Induction Hardening of Wind Turbine Main Shaft Bearings

Work proposed in this project focused on understanding the effect of martensitic transformation in the steel on the potential for cracking during seamless induction hardening (SIH) as a function of process conditions to allow the process to optimally scale up. Large-scale, three-dimensional phase-field simulations of martensitic transformation were performed using MEUMAPPS-SS (Microstructure Evolution Using Massively Parallel Phase-field Simulations – Solid State) code developed at Oak Ridge National Laboratory. The simulations were guided by location-specific thermal history generated by experimental measurements of time-temperature history generated at The Timken Company. The simulations were able to capture the morphological evolution of the martensite variants in an Fe-1.0C-1.5Cr steel based on the Nishiyama-Wasserman (NW) orientation relationship. The simulations were also able to quantify the stress-state at the interface between impinging martensite variants. The simulations indicated that the magnitude of the various stress and strain components were dependent on the sizes of the impinging plates with a reduction in these quantities with reduced plate size in agreement with experimental findings. The results obtained from the simulations will be used to guide the optimization of the alloy thermal conditions to eliminate quench cracking during SIH of bearing steels.

99 GENERAL AND MISCELLANEOUS↗