Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SLOPE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
NASA NTRS1957

Flight Investigation at Low Angles of Attack to Determine the Longitudinal Stability and Control Characteristics of a Cruciform Canard Missile Configuration with a Low-Aspect-Ratio Wing and Blunt Nose at Mach Numbers from 1.2 to 2.1

A full-scale rocket-powered model of a cruciform canard missile configuration with a low-aspect-ratio wing and blunt nose has been flight tested by the Langley Pilotless Aircraft Research Division. Static and dynamic longitudinal stability and control derivatives of this interdigitated canard-wing missile configuration were determined by using the pulsed-control technique at low angles of attack and for a Mach number range of 1.2 to 2.1. The lift-curve slope showed only small nonlinearities with changes in control deflection or angle of attack but indicated a difference in lift-curve slope of approximately 7 percent for the two control deflections of delta = 3.0 deg and delta = -0.3 deg. The large tail length of the missile tested was effective in producing damping in pitch throughout the Mach number range tested. The aerodynamic-center location was nearly constant with Mach number for the two control deflections but was shown to be less stable with the larger control deflection. The increment of lift produced by the controls was small and positive throughout the Mach number range tested, whereas the pitching moment produced by the controls exhibited a normal trend of reduced effectiveness with increasing Mach number. The effectiveness of the controls in producing angle of attack, lift, and pitching moment was good at all Mach numbers tested.

Brown, C. A., Jr.↗
NASA NTRS1972

The process of crater removal in the lunar maria, part P

Near-terminator photography from the Apollo 14 and 15 missions is used as a basis to evaluate the processes by which craters disappear from the lunar surface. From observations and analyses it is concluded that: (1) The erosion of lunar craters in the size range of 10 m to 1 km is effected principally by small impacts producing minute changes in crater form up to the point where the crater is worn to an interior slope of approximately 1 degree. Below that slope, the annihilation process is dominated by the formation of younger overlapping craters. (2) The distribution of shapes of craters in this size range can be explained as resulting from impact generated processes.

Soderblom, L. A.↗
NASA NTRS1972

Analytical determination of the effect of structural elasticity on landing stability of a version of the Viking Lander

A limited analytical investigation was conducted to assess the effects of structural elasticity on the landing stability of a version of the Viking Lander. Two landing conditions and two lander mass and inertia distributions were considered. The results of this investigation show that the stability-critical surface slopes were lower for an uphill landing than for a downhill landing. In addition, the heavy footpad mass with its corresponding inertia distribution resulted in lower stability-critical ground slopes than were obtained for the light footpad mass and its corresponding inertia distribution. Structural elasticity was observed to have a large effect on the downhill landing stability of the light footpad mass configuration but had a negligible effect on the stability of the other configuration examined. Because of the limited nature of this study, care must be exercised in drawing conclusions from these results relative to the overall stability characteristics of the Viking Lander.

Laurenson, R. M.↗
NASA NTRS1971

Lunar surface mechanical properties from Surveyor data.

During the Surveyor program spacecraft were successfully landed at five widely separated lunar locations. Recent computer simulations of each landing have provided more comprehensive data on the mechanical properties of the lunar surface than have been obtained previously by this method of analysis. Results show that the variations in surface bearing pressure observed at the various lunar sites are probably due to surface slope effects and do not necessarily indicate differences in soil properties at these sites. Estimates of cohesion at two sites give almost identical results and further support the conclusion that the soil properties at all sites are probably very similar. Surface pressures that resist horizontal (plowing) motion are largely due to cohesion, and density and gravitational contributions are small. It is concluded that the lunar surface bearing strength is essentially zero at the surface and, for zero surface slope, increases with penetration depth at a rate of 1.87 (plus or minus 0.33) N/cu cm. The cohesion of the lunar soil is estimated to be between 0.11 and 0.17 N/sq cm.

Jones, R. H.↗
NASA NTRS1972

Minor planets and related objects. VIII - Deimos.

Evaluation of 12 polarization measurements of Deimos in blue light were obtained at phase angles between 5 and 31 deg. A well-developed negative branch, with minimum polarization approximately -1.5% near phase angle 11 deg, indicates that Deimos is not bare rock but has a particulate surface layer of dark dust or powder. The phase angle of inversion is 19.5 deg, and the slope of the positive branch is 0.26 plus or minus 0.01% per degree. On the basis of the slope-albedo law for the moon and the major asteroids, the geometrical albedo of Deimos in blue light should be 0.07 plus or minus 0.01, and the radius 5.4 plus or minus 0.8 km. These values are in good agreement with preliminary Mariner 9 data.

Zellner, B.↗
NASA NTRS1972

Effect of set size, age, and mode of stimulus presentation on information-processing speed.

First, second, and third grade pupils served as subjects in an experiment designed to show the effect of age, mode of stimulus presentation, and information value on recognition time. Stimuli were presented in picture and printed word form and in groups of 2, 4, and 8. The results of the study indicate that first graders are slower than second and third graders who are nearly equal. There is a gross shift in reaction time as a function of mode of stimulus presentation with increase in age. The first graders take much longer to identify words than pictures, while the reverse is true of the older groups. With regard to set size, a slope appears in the pictures condition in the older groups, while for first graders, a large slope occurs in the words condition and only a much smaller one for pictures.

Norton, J. C.↗
NASA NTRS1972

Mars - The effects of topography on baroclinic instability.

The effects of a sloping lower boundary on the quasi-geostrophic baroclinic instability model of Eady are considered. Although the analytical model is too simplified for direct application to Martian conditions, the results should be useful in the interpretation of observations and numerical experiments. For slope orientations of most interest on Mars, the wavelength, growth rate and heat fluxes associated with the most unstable waves are decreased. As a result, the radiative-dynamical equilibrium state is closer to radiative equilibrium than one would calculate for a model with a horizontal lower boundary.

Blumsack, S. L.↗
NASA NTRS1972

A dynamic response and eye scanning data base useful in the development of theories and methods for the description of control/display relationships

A set of specially prepared digital tapes is reported which contain synchronized measurements of pilot scanning behavior, control response, and vehicle response obtained during instrument landing system approaches made in a fixed-base DC-8 transport simulator. The objective of the master tape is to provide a common data base which can be used by the research community to test theories, models, and methods for describing and analyzing control/display relations and interactions. The experimental conditions and tasks used to obtain the data and the detailed format of the tapes are described. Conventional instrument panel and controls were used, with simulated vertical gust and glide slope beam bend forcing functions. Continuous pilot eye fixations and scan traffic on the panel were measured. Both flight director and standard localizer/glide slope types of approaches were made, with both fixed and variable instrument range sensitivities.

Klein, R.↗
NASA NTRS1972

Space shuttle: A comparison of wind tunnel facility data on the Grumman H-33 delta winged orbiter

A comparison of longitudinal and lateral directional stability and control characteristics of the Phase B Grumman H-33 orbiter configuration obtained from 6 tests conducted in 4 different facilities is presented. The H-33 orbiter configuration does not include drop tanks. Slope data are used as the medium for comparison. The slope data were computed using the SADSAC system and have been reduced to a common reference system. Data used for comparison were selected based on common configurations wherever possible. Where direct configuration comparisons were not possible, the parameters selected for comparison are regarded as insensitive to the noted differences. Factors considered in comparing the various data were scaling effects, balance operating ranges, balance sensitivities and control deflection accuracies. All factors considered, the comparison among data obtained from the various facilities is excellent. The minor differences in stability and control characteristics are well within the accuracy band of preliminary design model construction specifications.

Gyorfi, R. A.↗
NASA NTRS1972

Space shuttle: A comparison of wind tunnel facility data on the 040A space shuttle orbiter configuration

A series of comparisons made on the longitudinal and lateral directional stability and control characteristics of the baseline 040A space shuttle orbiter configuration is documented. The data used for the comparisons were obtained from five wind tunnel tests conducted in four different wind tunnel facilities. The media for comparison were the aerodynamic slope values plotted as a function of Mach number for the different facilities. The slopes were computed using the SADSAC system and have been reduced relative to a common reference system. Data used for the comparison were selected based on a common baseline configuration. Identical configurations were available in all cases except MSFC 551 where an off-baseline vertical tail was tested. Some of the factors considered in comparing the various data were balance operating ranges and sensitivities, Reynolds number differences, scaling effects and control deflection accuracies.

Gyorfi, R. A.↗
NASA NTRS1972

Electron paramagnetic resonance studies of a viscous nematic liquid crystal: Evidence counter to a second-order phase change

The ordering in a viscous, nematic, liquid crystal was studied using vanadyl acetyl acetonate and several nitroxides as paramagnetic probes. The ordering curve for VAAC at both K-band and X-band shows a slope discontinuity at a reduced temperature of 0.85. This discontinuity is caused by the tumbling time of the VAAC becoming comparable with the hyperfine splitting. The slope discontinuity is not present in the ordering curves of the nitroxides. The results are taken as evidence counter to the presence of a second-order phase transition.

Shutt, W. E.↗
NASA NTRS1972

An Analysis of Texture on Lunar Ground Photos

An experiment was performed in an attempt to evaluate autocorrelation as an indicator of texture using five small patches representing varying distances on each of four lunar photos. Each patch was scanned at 50 micron increments on a 64-level gray scale. Several problems were involved in using the ordinary autocorrelation value but a rougher autocorrelation measure, the percentage of neighboring pairs (at a given lag distance) which fell within one graylevel of one another, yielded very encouraging results. As the distance to the feature decreased, initial slope of the graph of percentage against lag increased, and the general level of the graph decreased. When a crestline was present, the graph tended to continue to decrease at higher lags as well, rather than leveling off after the initial steep slope.

Olson, J. M.↗
NASA NTRS1973

Triangulation Error Analysis for the Barium Ion Cloud Experiment

The triangulation method developed specifically for the Barium Ion Cloud Project is discussed. Expression for the four displacement errors, the three slope errors, and the curvature error in the triangulation solution due to a probable error in the lines-of-sight from the observation stations to points on the cloud are derived. The triangulation method is then used to determine the effect of the following on these different errors in the solution: the number and location of the stations, the observation duration, east-west cloud drift, the number of input data points, and the addition of extra cameras to one of the stations. The pointing displacement errors, and the pointing slope errors are compared. The displacement errors in the solution due to a probable error in the position of a moving station plus the weighting factors for the data from the moving station are also determined.

Long, S. A. T.↗
NASA NTRS1972

Bistatic-radar investigation

The purpose of the reported experiment was to determine the principal electromagnetic and structural properties of the lunar surface from the observation of command and service module (CSM) radio transmissions that were reflected from the lunar surface and received on earth. These transmissions emanate from the CSM communication systems at wavelengths of 13 cm (S-band) and 116 cm (very high frequency (VHF)). Lunar crustal properties such as dielectric constant, average slope and slope probability, density, small-scale surface roughness, and embedded rocks to a depth of 20 m may be determined. The results are proving to be most useful in understanding the processes that have produced and modified the crust and in distingushing between adjacent and subjacent geological units. The experimental observations are also of intrinsic interest in the study of electromagnetic scattering.

Howard, H. T.↗
NASA NTRS1972

Head-up displays for STOL visual approaches

A simulation study was conducted to determine the effectiveness of a simple head-up display in improving glide-slope tracking performance during steep visual approaches in a STOL aircraft. The head-up display featured an attitude-stabilized horizon bar and glide-slope reference bar parallel to and 7.5 deg below the horizon bar. On some approaches a flight-path marker symbol showing the projected ground impact point was also displayed. Half of the approaches were flown in a conventional mode in which the pilot changed pitch attitude to correct for height errors. The remaining approaches were flown in a direct-lift mode in which the pilot modulated thrust to change the flight-path angle without pitching the aircraft.

Palmer, E. A.↗
NASA NTRS1973

Surface roughness effects on bidirectional reflectance.

An experimental study of surface roughness effects on bidirectional reflectance of metallic surfaces is presented. Samples consisting of glass, aluminum alloy, and stainless steel materials were roughened using standard grinding techniques and coated with a radiatively opaque layer of pure aluminum. Surface roughness parameters, rms height and rms slope, were evaluated from digitized surface profile measurements and are less than 1.0 micron, and 0.28, respectively. Rough-surface specular, bidirectional, and directional reflectance measurements for selected values of polar angle and wavelength of incident energy within the range from 10 to 80 deg and from 1 to 14 microns, respectively, are reported. The influence of surface roughness is discussed in terms of rms height and rms slope.

Smith, T. F.↗
NASA NTRS1972

Lineaments of the Apennine Front - Apollo 15 landing site.

The well-developed systems of lineaments that suggest regional fracturing or layering of the bedrock in the mountains at the Apollo 15 site may be illusions created by oblique lighting rather than expressions of true geologic structure. Supporting evidence includes: (1) occurrence of similar dominant lineament trends on many of the slopes even though the slope orientations differ widely; (2) presence of a thick mantling regolith that should conceal bedrock structures; (3) approximate symmetry of some of the lineament sets about the sun line; (4) lack of clear-cut topographic expression for many of the lineaments; and (5) general similarity of the lunar lineaments to lineament patterns produced by low oblique lighting on model surfaces mantled by fine sifted powder. Locally, as at Silver Spur, some lineament trends are related to distinct topographic features and are more confidently interpreted to reflect underlying geologic structures.

Wolfe, E. W.↗
NASA NTRS1973

Comparison of the Beckmann model with bidirectional reflectance measurements.

The Beckmann model is compared with recently reported bidirectional reflectance measurements. Comparisons revealed that monochromatic specular and bidirectional reflectance measurements are not adequately described by corresponding results evaluated from the model using mechanically acquired surface roughness parameters (rms height and rms slope). Significant improvement between measurements and predictions of the model is observed when optically acquired surface roughness parameters are used. Specular reflectance measurements for normal to intermediate polar angles of incidence are adequately represented by the model provided values of optical roughness multiplied by cosine of polar angle of incidence are less than 27 times average optical rms slope.

Smith, T. F.↗