Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SEM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Topochemical Understanding of Lignin Distribution During Hydrothermal Flowthrough Pretreatment

Changes in surface properties during biomass pretreatments are important parameters to understand and engineer biological biomass conversion processes. In particular, different influences on the surface of biomass are expected between flowthrough and batch pretreatments. In this paper, for a better understanding of biomass surface changes by hydrothermal flowthrough pretreatment, the mechanism by which the surface of biomass is altered in terms of cellulose and lignin was investigated using time-of-flight secondary ion mass spectrometry (ToF-SIMS) and compared with the bulk chemical composition and the results from scanning electron microscope (SEM). ToF-SIMS analysis results provide semi-quantitative information of cellulose and lignin and support the other observation from SEM and bulk compositional analyses. In brief, more lignin was observed on the surface of biomass at the early stage hydrothermal pretreatment, while the lignin mainly located at the cell corners was reduced by extended pretreatment time. Finally, unlike batch pretreatment, pseudo-lignin formation was not observed on the poplar surface during the flowthrough process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tip-Induced 3D Printing on the Nanoscale with Field Emission Scanning Probes

3D printing down to the nanoscale remains a significant challenge. In this paper, the study explores the use of scanning probes that emit low-energy electrons (<100 eV) coupled with the localized injection and electron-induced decomposition of precursor molecules, for the precise localized deposition of 3D nanostructures. The experiments are performed inside the chamber of a scanning electron microscope (SEM), enabling the use of the in-built gas injector system (GIS) with gaseous naphthalene precursor for carbon deposition, as well as immediate inspection of the deposits by SEM. Substrate materials are planar fused silica with thin conductive coatings and non-planar copper wedges. After investigation of the deposition process parameters, various 2D and 3D carbon deposits are grown. Vertical nanowires several microns in length with a diameter <100 nm are achieved and 3D deposits with a high degree of nanoscale branching are also obtained, presumably due to a charging effect. High aspect ratio carbon nanostructures such as those demonstrated here can be employed as miniaturized electrodes or field emitters. The tip-based approach presented thus paves the way toward 3D nanoscale printing of various materials and functional nanostructures.

3D printing↗

Quantification of Swelling in Hematite Pellets Reduced Using Hydrogen–Nitrogen Gas Mixture

Iron ore pellets are reduced in a 50%H 2 –50%N 2 1 atm gas mixture at 750, 800, 850, 900, and 950 °C while simultaneously documenting swelling (change in pellet radius) and weight change. Swelling increases with increasing temperature, with catastrophic swelling (>20% of reduction swelling index) observed at 850, 900, and 950 °C. As the pellet is reduced, the pellet radius increases until 40–50% reduction is achieved, followed by a decrease in diameter beyond 40–50% reduction at 750 and 850 °C. At 950 °C, the pellet radius continues to increase with additional pellet reduction without any subsequent decrease in diameter. Scanning electron microscopy (SEM) analysis shows that the neighboring grains inside the pellet sinter together at 750 and 850 °C, whereas the individual grains sinter internally at 950 °C. SEM analysis and observations suggest that the reduction process at 750 and 850 °C can be approximated as a topochemical reaction process, while the reduction process at 950 °C can no longer be approximated as a topochemical reaction process. In conclusion, an empirical equation for the radius of the pellet is derived with fitting parameters dependent on temperature and the degree of reduction of the pellet undergoing reduction based on the experimental data.

08 HYDROGEN↗

Laser Microperforated Biodegradable Microbial Polyhydroxyalkanoate Substrates for Tissue Repair Strategies: An Infrared Microspectroscopy Studey

Flexible and biodegradable film substrates prepared by solvent casting from poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBHV) solutions in chloroform were microperforated by ultraviolet laser ablation and subsequently characterized using infrared (IR) microspectroscopy and imaging techniques and scanning electron microscopy (SEM). Both transmission synchrotron IR microspectroscopy and attenuated total reflectance microspectroscopy measurements demonstrate variations in the polymer at the ablated pore rims, including evidence for changes in chemical structure and crystallinity. SEM results on microperforated PHBHV substrates after cell culture demonstrated that the physical and chemical changes observed in the biomaterial did not hinder cell migration through the pores.

36 MATERIALS SCIENCE↗

Experimental Study of Poly-l-Lactic Acid Biodegradable Stents in Normal Canine Bile Ducts

Purpose: This study was designed to clarify the advantages of biodegradable stents in terms of mucosal reaction and biodegradation after placement. We designed a biodegradable stent and assessed stent degradation and changes in the normal bile ducts of dogs. Methods: The biodegradable stent is a balloon-expandable Z stent consisting of poly-l-lactic acid (PLLA) with a diameter of 6 mm and a length of 15 mm. We assessed four groups of three beagle dogs each at 1, 3, 6, and 9 months of follow-up. After evaluating stent migration by radiography and stent and bile duct patency by cholangiography, the dogs were sacrificed to remove the bile duct together with the stent. The bile duct lumen was examined macroscopically and histologically, and the stent degradation was examined macroscopically and by scanning electron microscopy (SEM). Results: Bile duct obstruction was absent and none of the stents migrated. Macroscopic evaluation showed moderate endothelial proliferation in the bile ducts at the implant sites at 3 and 6 months and a slight change at 9 months. Slight mononuclear cell infiltration was histologically identified at all time points and epithelial hyperplasia that was moderate at 3 months was reduced to slight at 6 and 9 months. Stent degradation was macroscopically evident in all animals at 9 months and was proven by SEM in two dogs at 6 months and in all of them at 9 months. Conclusions: Our results suggest that PLLA bioabsorbable stents seems to be useful for implantation in the biliary system with further investigation.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Optical, Structural and Photo Electrochemical Properties of Cd1-xZnxS Films Grown by Chemical Bath Deposition

Cd1-xZnxS (0 = x = 0.5) films were fabricated by chemical bath deposition method and characterized by grazing incidence X-ray diffraction (GIXRD), scanning electron microscopy (SEM), UV-visible spectroscopy and photoelectrochemical (PEC) cell. The flat band potential value was found to be tunable from -441 to -664 mV with increasing Zn2+ concentration in the reaction solution. GIXRD results indicate that the fabricated Cd1-xZnxS are hexagonally oriented and Zn2+ is successfully introduced into CdS. SEM results indicate that high Zn2+ doping concentration can form flake-like Cd1-xZnxS morphology. Furthermore, Zn2+ incorporation to the CdS was found to enhance the optical absorbing capability of CdS in visible region. The optical band gap was found to vary as the composition parameter changed from x = 0.0 to x = 0.5 in the reaction solution. The PEC cell results indicate that the Cd1-xZnxS thin films with x > 0.3 in the bath show the pinning of the Fermi level and cause VOC to decrease.

Chemical Bath Disposition, CBD, doping, thin film↗

Studies on Structural, Optical, Thermal and Electrical Properties of Perylene-Doped p-terphenyl Luminophors

A simple solid state reaction technique was employed for the preparation of polycrystalline luminophors of p-terphenyl containing different amounts of perylene followed by spectral characterization techniques viz. XRD, SEM, TGA-DSC, UV–Visible spectroscopy, thermo-electrical conductivity, fluorescence spectroscopy, fluorescence life time spectroscopy and temperature dependent fluorescence. X-ray diffraction profiles of the doped p-terphenyl reveal well-defined and sharp peaks indicate homogeneity and crystallinity. The SEM micrograph of pure p-terphenyl exhibit flakes like grains and then compact and finally gets separately with perylene amounts. The observed results indicate that closed packed crystal structures of doped p-terphenyl during crystal formation. The band gaps estimated from UV–visible spectroscopy decreased from 5.20 to 4.10 eV, while thermo-electrical conductivity increases with perylene content. The fluorescence spectra showed partial quenching of p-terphenyl fluorescence and simultaneously sensitization of perylene fluorescence at the excitation wavelength of p-terphenyl (290 nm) due to excitation energy transfer from p-terphenyl to perylene. The observed sensitization results are in harmony with intense blue color seen in fluorescence microscopy images and has high demand in scintillation process.

36 MATERIALS SCIENCE↗

Effect of Varying Filler Concentration on Zinc Oxide Nanoparticle Embedded Chitosan Films as Potential Food Packaging Material

Prevailing scenario of non-biodegradable food packaging materials worldwide was the motivation for this research. More than half of the packaging materials used today are non-biodegradable and lack one or the other feature that keeps it from being an ideal food packaging material. Based on the current need of food grade packaging materials, the present study illustrates the amelioration of the properties of biodegradable chitosan films with the incorporation of zinc oxide (ZnO) nanoparticles in varying concentration. The ZnO nanoparticles (ZnONPs) used as fillers in the chitosan films were synthesized by supersaturation method. They were characterized using UV–visible spectrophotometry, X-ray diffraction and field emission scanning electron microscopy (FE-SEM). The particles were observed to be around 100–200 nm in size. The chitosan films with varying concentration of ZnONPs were synthesized and characterized using Fourier transform infrared spectroscopy and FE-SEM. The films were studied for their thermal stability, water vapor transmission rate (WVTR) and mechanical properties. The thermal stability, as determined by Thermo Gravimetric Analysis and Differential Scanning Calorimetry increased slightly with increasing percentage of embedded ZnONPs while a substantial decrease in WVTR was observed. Mechanical properties also showed improvements with 77% increment in tensile modulus and 67% increment in tensile strength. The antimicrobial activity of the films was also studied on gram positive bacterium Bacillus subtilis (B. subtilis) and gram negative bacterium Escherichia coli (E. coli) by serial dilution method. A twofold and 1.5-fold increment in the antimicrobial activity was observed for B. subtilis and E. coli, respectively, with increased ZnONPs concentration in the films from 0(w/w) to 2%(w/w). Films thus prepared can prove to be of immense potential in the near future for antimicrobial food packaging applications.

36 MATERIALS SCIENCE↗

Effect of Multi-Walled Carbon Nanotubes on Viscoelastic Properties of PP/Reed Flour Composites

The objective of this investigation was to evaluate the influence of multi-wall carbon nanotubes (MWCNTs) on the dynamic mechanical properties of polypropylene (PP)/reed flour (RF) composites. The experimental samples were prepared through the melt mixing of PP/RF at 50% weight ratios, with various amounts of MWCNTs (0, 1, 2, 3 and 5 phr) in a twin-screw extruder, then the samples made by injection molding. The amount of maleic anhydride grafted polypropylene (PP-g-MA) as a coupling agent was fixed at 2 phr for all formulations. Dynamic mechanical analysis (DMA) tests were carried out to investigate the viscoelastic behavior of nanocomposites. The dynamic mechanical properties such as storage modulus (Eʹ), loss modulus (Eʺ), and damping coefficient (tan δ) of nanocomposites were investigated in the temperature range of −80 to 160 °C at a step of 5 °C and frequency of 1 Hz. The morphology of the specimens was characterized using field emission scanning electron microscope (FE-SEM) technique. Results indicated that the storage modulus of samples was found to increase with incorporation of MWCNTs while damping properties registered a decrease, owing to the reinforcing effect of CNTs into the composites. Moreover, CNTs addition leads to a positive shift in glass transition temperature (T{sub g}), which is explained on the molecular mobility of the polymer chains behavior. Additionally, the minimum adhesion factor is related to samples containing 2 phr MWCNTs which provides the best interaction between polymer and fibers. FE-SEM micrographs showed a predominantly homogeneous CNTs distribution through the composites; however, some aggregates were observed at higher CNTs fractions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Investigation of Polypropylene-Montmorillonite Clay Nanocomposite Films Containing a Pro-degradant Additive

This paper investigates the performance of polypropylene (PP) incorporated with montmorillonite (MMT) nanoclay, maleic anhydride grafted PP (PP-g-MAH), and pro-degradant additive (TDPA®), which provides additional benefits of increasing biodegradability. A twin-screw extruder was used to compound PP, MMT, PP-g-MAH, and TDPA, and the extruded nanocomposite films were collected for testing, and their mechanical, thermal, barrier, oxo-biodegradability, and morphological properties were evaluated. Tensile test, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), oxygen permeability test, soil burial test, X-ray diffraction (XRD), transmission electron microscopy (TEM), and scanning electron microscope (SEM) analysis were used to investigate these properties. Increasing MMT content from 1 to 3 phr increases tensile strength and Young’s modulus of the neat PP samples up to ca.45% and 27% respectively. Improvement of thermal properties for neat PP samples was observed by increasing MMT content from 1 to 3 phr. However, at 4 phr MMT content, both mechanical and thermal properties of nanocomposites dropped slightly. For soil buried samples, DSC and TGA results revealed significant changes in the thermal properties for PP samples containing TDPE additive compared to neat PP, clearly confirming the effectiveness of this TDPA additive in promoting oxo-biodegradation process of PP. Similarly weight loss evaluation result shows that about 4% weight loss for sample (PP/TD), which is PP and TDPA blend only, compared to neat PP. However, increasing MMT content from 1 to 4 phr slightly reduced weight loss of PP from 3.5 to 1.5%, respectively, for 6 month soil exposure period, which indicates that increasing MMT content was detrimental to the degradation process. For higher MMT content, the oxygen permeability of PP nanocomposites was decreased by 46% of the corresponding values for neat PP. The XRD and TEM results confirmed the exfoliation structure of the nanocomposites. The morphological change after soil burial test was studied using scanning electron microscopy (SEM).

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Performance of Cow Dung Reinforced Biodegradable Poly(Lactic Acid) Biocomposites for Structural Applications

In this work, performance of cow dung (CD) reinforced poly(lactic acid) (PLA) biocomposites was investigated for the potential use in load bearing application. CD of average 4 mm size was blended with PLA at different CD ratios (0–50 wt%) and their effects on the biocomposite properties were studied. The results showed an improvement in the flexural properties, while the tensile and impact strength dropped by 20 and 28% with the addition of 50% CD. The decline in the tensile and impact strength was due to micro-cracking and voids formation at higher CD content. Also, the incorporation of CD slightly decreased the thermal stability of the biocomposite. However, dynamic mechanical properties of the biocomposites generally improved. SEM analysis of tensile and impact fractured surfaces indicated that the CD had a reasonable adhesion with matrix. Moreover, the SEM micrographs of soil burial studies showed an accelerated degradation of higher CD wt% biocomposites.

36 MATERIALS SCIENCE↗

Annatto-colored Poly(3-hydroxybutyrate): A Comprehensive Study on Photodegradation

Annatto natural colorant was extracted from annatto seeds (Bixa Orellana L.) by using ultrasound. Structural characterization of the extract was done by FTIR. The aim of the present work was the developement and characterization of biodegradable colored films based on poly(3-hydroxybutyrate) by using annatto colorant. The annatto content in the films was varied from 0.2 to 3.0% (w/w). The lightfastness of colored films when exposed to UVA radiation was controlled by using RGB color system. In color image processing, a pixel is often defined by three values corresponding to the tristimuli R (Red), G (Green) and B (Blue). With the addition of the annatto colorant, photodegradation of films under UVA exposure seemed to be improved. The good thermal stability of the colored film with 3.0% (w/w) of annatto colorant was confirmed by thermogravimetric analysis. Surface morphology of the colored film with 3.0% (w/w) of annatto colorant was examined by SEM prior and after 240 h of UVA exposure. The SEM micrographs suggested that annatto colorant has acted as hiding agent, reducing the photodegradation processes.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Novel Thin Film Composite Nanofiltration Membrane Using Monoethanolamine (MEA) and Diethanolamine (DEA) with m-Phenylenediamine (MPD)

A novel thin-film composite (TFC) nanofiltration membrane was prepared by interfacial polymerization of polyamide layer on a polyethersulfone support, using monoethanolamine (MEA) and diethanolamine (DEA) with m-phenylenediamine as monomers and trimesoyl chloride (TMC) as crosslink agent. The membrane surface before and after using aminoalcohol monomers (MEA and DEA) was investigated in detail using ATR-FTIR, TGA, AFM and SEM. The AFM and SEM images showed that addition of MEA and DEA had a strong impact on surface morphology. The polyamide layer thickness of control and modified TFC membranes based on MEA and DEA were calculated to be in 180–230 nm range and the mean pore sizes were about 0.35–1.2 nm. The RO performance tests indicated that addition of MEA and DEA can increase the NaCl and Na{sub 2}SO{sub 4} rejection remarkably with little decline in the pure water permeation flux.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Green Synthesis and Antioxidant Study of Silver Nanoparticles of Root Extract of Sageretia thea and Its Role in Oxidation Protection Technology

Development of environmentally friendly synthesis of nanoparticles is one of the important areas of research in nanotechnology. In present study silver naopartticles (AgNPs) of root extract of Sageretia thea (S. thea) were synthesized at room temperature. The synthesized AgNPs were characterized by UV. Visible spectroscopy (UV), scanning electron microscopy (SEM), X-ray diffraction (XRD), energy dispersive spectroscopy (EDX), transmission electron microscopy (TEM), dynamic light scattering (DLS) and Fourier transform infrared (FT-IR) spectroscopy. Formation of AgNPs was confirmed by visual examination the colour change from yellow to brick red due to surface Plasmon resonance band at 435 nm. SEM and TEM analysis of synthesized AgNPs revealed spherical morphology with average particle size 25 nm. Crystalline nature of the AgNPs in face centered cubic structure is evident from the selected area electron diffraction (SAED) and XRD pattern. The presence of elemental Ag was confirmed by EDX analysis at 3kv. Different functional groups which responsible for reduction and stabilization of reaction medium was confirmed by FTIR spectroscopy. The biosynthesized AgNPs showed strong DPPH and dye protection radical scavenging assay while modest hydrogen peroxide radical scavenging assay as compare to crude extract. The present investigations suggest that biosynthesized nanoparticles have a high potential for use in the preparation of drugs used against various diseases and also a promising candidate for many medical applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

A Microscopic Study of Paper Decayed by Trichoderma harzianum and Paecilomyces variotii

The current study is interested in evaluating the decay of cotton, Whatman and chemical pulp caused by Trichoderma harzianum and Paecilomyces variotii. The structural changes of the paper were evaluated by Infrared Spectroscopy (FTIR) and Scanning Electron Microscope (SEM). The SEM results show differences in hyphae colonization and paper decay patterns between studied species under the current study; P. variotii caused an eroded structure in the cotton (cavity forming), whereas the initial T. harzianum colonization produced rupture and erosion (soft-rot decay type II) for the three types of paper ,the gaps were elongated with sharp pointed ends, which consisted either of individual cavities or in chains. Moreover, FTIR results confirmed that there a relationship could be observed between fungal decay and crystalline cellulose content because the intensity of peaks at 1335 and 1111 cm{sup −1} significantly decreased due to the fungal decay. Furthermore, the intensity of O–H stretching absorption slightly decreased, and this may be attributed to hydrolysis of cellulose molecules.

36 MATERIALS SCIENCE↗

Effect of Silver Doped Zinc Oxide as Nanofiller for the Development of Biopolymer Nanocomposites from Chitin and Cashew Gum

Nanocomposites based on chitin (CT) and cashew gum (CG) with different concentrations of silver doped zinc oxide nanoparticles (Ag–ZnO) were prepared and characterized by FTIR, UV, XRD, TEM, SEM, DSC, TGA, electrical conductivity measurements. FTIR spectra showed that the characteristic absorption band of the blend was shifted to a higher frequency in nanocomposites, indicating the intermolecular interaction between the blend and nanoparticles. The change in the UV absorption of nanocomposites relative to that of pure blend indicated the successful encapsulation of crystalline metal oxide nanoparticles in the blend matrix. XRD patterns showed that the diffraction peak of the composites were shifted near to the metal oxide peak which indicated that the surface of Ag–ZnO was perpendicular to CT/CG and changed from a semi-crystalline nature to a crystalline structure. The morphological analysis using SEM and TEM showed a uniform attachment of nanoparticles within the CT/CG blend. DSC analysis showed the increased glass transition temperature by the addition of nanoparticles. Thermal stability of nanocomposites was higher than the blend and thermal stability increased with an increase in the content of nanoparticles. The different electrical properties such as AC conductivity and dielectric behaviour of the composites were increased with an increased loading of nanoparticles.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Novel Biocomposites Based on Sunflower Oil and Alfa Fibers as Renewable Resources

The aim of this work is to develop biocomposites based on modified sunflower oil as resin and short natural fibers from Alfa plants (Stipa tenacissima) as reinforcement. Epoxidized sunflower oil (ESFO) was chemically modified via acrylation reaction to obtain acrylated epoxidized sunflower oil resin (AESFO). The AESFO resin was then copolymerized with styrene as co-monomer in the presence of boron trifluoride (BF{sub 3}) as cationic initiator and cobalt octoate (Co) as catalyst. Experimental conditions of this modification were optimized by varying styrene, Co and BF{sub 3} wt%. The styrene was varied from 30, 40 to 50 wt% while the catalyst (Co) was varied from 0, 0.01, 0.02 to 0.03 wt%. Two different percents of BF{sub 3} were considered: 0.5 and 1 wt%. The prepared samples were evaluated according to their appearance and then characterized in terms of tensile properties (stress at break, Young’s modulus and elongation at break) to determine the best ratio of styrene/BF{sub 3}/Co. Alfa fibers, used as bio-reinforcement, were treated with a 5% NaOH solution and characterized by Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM) and thermo gravimetric analysis (TGA). Biocomposites were prepared by using untreated (UAF) and treated Alfa fibers (TAF) at a ratio of 5 wt% and characterized in terms of tensile properties and morphology by SEM. The best results were obtained with TAF. Then, the ratio of TAF was varied (5, 7.5 and 10 wt%) and the tensile and thermal properties of the biocomposites were characterized. The results showed that the best results were obtained with the ratio of 7.5 wt%.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crosslinked Polyacrylamide Composite Hydrogels Impregnated with Fly Ash: Synthesis, Characterization and Their Application as Fractures Sealant for High Water Producing Zones in Oil and Gas Wells

Polymeric hydrogels are designed to serve many purposes in various fields of human endeavor. Herein, crosslinked polyacrylamide (PAM) composite hydrogels impregnated with coal fly ash (CFA) were synthesized, characterized and tested as fracture sealing agents in high water producing permeable zones in petroleum industry. The concept of utilizing CFA as an inorganic additive in the matrix of hydrogel emanates from the fact that CFA constitutes majorly alumina and silica. Both chemical oxides can induce the CFA to promote the inherent properties of hydrogel. Polyethyleneimine (PEI) was chosen as the crosslinking agent. Neat PAM/PEI hydrogel and PAM/PEI–CFA hydrogels at various CFA loadings (0.5, 1 and 2 wt%) were synthesized via a transamidation reaction pathway. The developed hydrogels were characterized by hybrid rheometer, FTIR, SEM and XRD instruments. Rheological results reveal that the PAM/PEI–CFA composite hydrogels embedded with various CFA quantities were more elastic than the neat PAM/PEI hydrogel, indicating the dispersion and reinforcing effect of CFA. The functional groups of these hydrogels were confirmed by the FTIR while SEM analysis show that the surface micrographs of neat PAM/PEI hydrogel and PAM/PEI–CFA1 hydrogel were porous in several regions. In contrast, the micrographs of PAM/PEI–CFA2 and PAM/PEI–CFA3 hydrogels demonstrated dense and “net-like” structural patterns. Further, XRD analysis revealed that CFA impregnation has a significant effect on the bulk structural properties of the fabricated hydrogels. The swelling rates of these hydrogels were determined by the gravimetric method and their diffusion parameters evaluated using Fickian diffusion and Schott-order kinetic models. Efficacy of the PAM/PEI–CFA composite hydrogel as fractures sealant in oil and gas wells was conducted at a typical reservoir temperature, 90 °C, and the outcome demonstrated considerable sealing potency.

36 MATERIALS SCIENCE↗