Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SARS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Texture measurements from Seasat - SAR images for urban land use interpretation

Different grey tones in Seasat Synthetic Aperture Radar (SAR) images for the same type of urban land cover considerably impair the possibilities of establishing automatic classification procedures for these types of data. Since the orientation of the main features like street patterns and buildings with respect to the azimuth angle of the radar antenna is the crucial factor for the observed differences in grey tone, prior information on these elements and special processing of the data would be required to eliminate this effect. Another approach suggested in this paper is to make use of the textural information in the image rather than of its grey tone. For different study sites within the Los Angeles urbanized area texture measures could be derived which result in characteristic values for specific types of land cover and are largely independent of the azimuth angle effect. At the same time the results for the study area indicate an improvement of the overall separability for the different land cover types included in the analysis.

Fasler, F.↗
NASA NTRS1981

Optimal spatial filtering and transfer function for SAR ocean wave spectra

The impulse response of the SAR system is not a delta function and the spectra represent the product of the underlying image spectrum with the transform of the impulse response which must be removed. A digitally computed spectrum of SEASAT imagery of the Atlantic Ocean east of Cape Hatteras was smoothed with a 5 x 5 convolution filter and the trend was sampled in a direction normal to the predominant wave direction. This yielded a transform of a noise-like process. The smoothed value of this trend is the transform of the impulse response. This trend is fit with either a second- or fourth-order polynomial which is then used to correct the entire spectrum. A 16 x 16 smoothing of the spectrum shows the presence of two distinct swells. Correction of the effects of speckle is effected by the subtraction of a bias from the spectrum.

Beal, R. C.↗
NASA NTRS1982

Geometric and rediametric distortion in spaceborne SAR imagery

Distortions inherent on synthetic aperture radio (SAR) imagery and the development to date of unsupervised postprocessing rectification techniques are described. The geometric distortion can be divided into two categories: (1) distortion derived from the radar viewing geometry, this includes such effects as ground range nonlinearities, radar foreshortening and radar layover; (2) distortion introduced during the data processing, these distortions result from approximations made during the correlation such as in estimation of the target phase history, or compensation for the earth rotation. The processor induced distortions depends on the specific correlation algorithm used for image formation. The effects are addressed on the image product resulting from assumptions during the processing and it specifically considers distortions inherent in digital imagery produced by the digital image processor.

Curlander, J. C.↗
NASA NTRS1980

Preliminary results of mapping urban land cover with Seasat SAR imagery

The detectability of urban land cover types is explored using digitally processed Seasat SAR imagery of the Denver, Colorado area. Test sites within the metropolitan area were selected to include a cross section of Anderson, et. al. Level II land cover classes and cover types representative of the urban area growth stages. Using the Image 100 interactive processing system each test site was level sliced in an attempt to define specific reflectance boundaries for each cover type and to determine the spectral and spatial characteristics of homogeneous response regions. The rural-urban fringe boundary was readily definable, but a precise Level I and Level II land cover classification was not possible. High density housing could be separated from low density housing and from parks, but reflectance values were often look angle dependent. Confusion between some water and vegetation responses also posed problems.

Henderson, F. M.↗
NASA NTRS1981

Optimal spatial filtering and transfer function for SAR ocean wave spectra

The Seasat Synthetic Aperture Radar (SAR) has proved to be an instrument of great utility in the sensing of ocean conditions on a global scale. An analysis of oceanographic and atmospheric aspects of Seasat data has shown that the features observed in the imagery are linked to ocean phenomena such as storm sources and their resulting swell systems. However, there remains one central problem which has not been satisfactorily solved to date. This problem is related to the accurate measurement of wind-generated ocean wave spectra. Investigations addressing this problem are currently being conducted. The problem has two parts, including the accurate measurement of the image spectra and the inference of actual surface wave spectra from these measurements. A description is presented of the progress made towards solving the first part of the problem, taking into account a digital rather than optical computation of the image transforms.

Goldfinger, A. D.↗
NASA NTRS1982

Ocean wave height measurement with SEASAT SAR using speckle diversity

Measurement of ocean wave heights with the synthetic aperture radar can be accomplished with high spatial resolution by determining the variation of speckle intensity with the frequency and angle of illumination. A comparison of data obtained by the SEASAT SAR with surface truth measurements obtained during the GOASEX and the JASIN experiments demonstrates this concept.

Jain, A.↗
NASA NTRS1984

Digital SAR Processor

Produces real-time, single-look, high-resolution imagery. Digital synthetic-aperature-radar (SAR) processor achieves rate of 4 million samples per second. System combines frequency-domain and time-domain processing for two-dimensional azimuth correlation.

Wu, C.↗
NASA NTRS1981

Exploitation of SAR data for measurement of ocean currents and wave velocities

Methods of extracting information on ocean currents and wave orbital velocities from SAR data by an analysis of the Doppler frequency content of the data are discussed. The theory and data analysis methods are discussed, and results are presented for both aircraft and satellite (SEASAT) data sets. A method of measuring the phase velocity of a gravity wave field is also described. This method uses the shift in position of the wave crests on two images generated from the same data set using two separate Doppler bands. Results of the current measurements are pesented for 11 aircraft data sets and 4 SEASAT data sets.

Shuchman, R. A.↗
NASA NTRS1982

SEASAT SAR performance evaluation study

The performance of the SEASAT synthetic aperture radar (SAR) sensor was evaluated using data processed by the MDA digital processor. Two particular aspects are considered the location accuracy of image data, and the calibration of the measured backscatter amplitude of a set of corner reflectors. The image location accuracy was assessed by selecting identifiable targets in several scenes, converting their image location to UTM coordinates, and comparing the results to map sheets. The error standard deviation is measured to be approximately 30 meters. The amplitude was calibrated by measuring the responses of the Goldstone corner reflector array and comparing the results to theoretical values. A linear regression of the measured against theoretical values results in a slope of 0.954 with a correlation coefficient of 0.970.

Source record↗
NASA NTRS1981

Analysis of Jamaican lineaments visible in Seasat-SAR imagery

Three digitally correlated Seasat SAR frames of Jamaica are used to examine the fault-related topography of the island. The major fault-controlled lineaments visible in the imagery are described, and some generalizations are made with respect to the recent tectonics of Jamaica. It is suggested that: (1) the island of Jamaica may represent the original position of a bend or discontinuity in the northern Caribbean Plate boundary; (2) the present tectonic regime may indicate the complex modification of a regional stress field at a discontinuity in an otherwise linear shear zone; (3) the island represents a tectonically maintained mass excess; and (4) the observed rapid uplift along the island's north coast may be related to compression-induced reverse faulting.

Dixon, T. H.↗
NASA NTRS1983

Sea ice motion measurements from Seasat SAR images

Data from the Seasat synthetic aperture radar (SAR) experiment are analyzed in order to determine the accuracy of this information for mapping the distribution of sea ice and its motion. Data from observations of sea ice in the Beaufort Sea from seven sequential orbits of the satellite were selected to study the capabilities and limitations of spaceborne radar application to sea-ice mapping. Results show that there is no difficulty in identifying homologue ice features on sequential radar images and the accuracy is entirely controlled by the accuracy of the orbit data and the geometric calibration of the sensor. Conventional radargrammetric methods are found to serve well for satellite radar ice mapping, while ground control points can be used to calibrate the ice location and motion measurements in the cases where orbit data and sensor calibration are lacking. The ice motion was determined to be approximately 6.4 + or - 0.5 km/day. In addition, the accuracy of pixel location was found over land areas. The use of one control point in 10,000 sq km produced an accuracy of about + or 150 m, while with a higher density of control points (7 in 1000 sq km) the location accuracy improves to the image resolution of + or - 25 m. This is found to be applicable for both optical and digital data.

Leberl, F.↗
NASA NTRS1982

Amplitude calibrating the Seasat SAR imagery

The Seasat Synthetic Aperture Radar is described with emphasis placed on those aspects of the system that affect the amplitude calibration of the radar. Imagery produced by several Seasat passes over Death Valley, California are examined in an effort to determine the reproducibility of the data and the potential for relative and absolute calibration of the overall SAR image data set.

Held, D.↗
NASA NTRS1983

Comparison of several techniques to obtain multiple-look SAR imagery

In order to improve image interpretability when SAR imagery is contaminated by coherent speckle noise, multiple look images are often generated. The performance levels of techniques for the generation of such multiple look imagery are presently assessed, with attention to the detailed impulse responses and signal-to-speckle noise ratios obtainable. The speckle-reduction technique considered are those of the discrete mixed integrator and the image domain filter. It is found that, by using several types of image domain filters, the signal-to-speckle noise ratio can be improved over the conventional discrete mixed integrator method's results while maintaining the equivalent rectangular resolution constant.

Li, F.-K.↗
NASA NTRS1983

Spaceborne SAR sensor architecture

Spaceborne imaging radars for the decade of the '90s will be called upon to provide increased illumination parameter flexibility, polar orbital coverage, and to operate from the same platform with other advanced sensors such as multilinear arrays. The potential information content in accurately merged microwave infrared, or microwave visible images is enormous by comparison to either radar images alone or visible/infrared images alone, since microwave images are principally responsive to surface geometry whereas visible/infrared images are highly sensitive to surface chemistry. A strawman system concept in which a SAR and multilinear array (MLA) are flown on a polar orbiting free flyer at 800 km altitude is discussed. Data would be relayed to ground via the TDRSS (or equivalent).

Carver, K. R.↗
NASA NTRS1983

Slotted waveguide array antennas for spaceborne SAR applications

Starting with mission definitions and constraints for the NASA proposed Shuttle Active Microwave Experiments (SAMEX) and Free Flying Imaging Radar Experiment (FIREX), Hughes Aircraft Company has compiled and studied the technology available for slotted waveguide planar array antennas suitable for spaceborne SAR application. Antenna performance is derived, and fabrication techniques are discussed. Mission requirements will always lead to an aperture subdivided into waveguide modules, thereby validating a module definition for other mission building blocks. Finally, a specific design is proposed for a SAMEX mission using the modules as RF aperture building blocks, resulting in a (nominal) 15.1 meter by 5.5 meter extensile dual polarized L-, C-, and X-band planar array with an associated extensile graphite/epoxy support structure. Antenna development begin with a fabrication method development study involving a representative portion of an antenna module.

Bostrom, D. E.↗
NASA NTRS1984

Tracking ocean wave spectrum from SAR images

An end to end algorithm for recovery of ocean wave spectral peaks from Synthetic Aperture Radar (SAR) images is described. Current approaches allow precisions of 1 percent in wave number, and 0.6 deg in direction.

Goldfinger, A. D.↗
NASA NTRS1984

SAR imagery of ocean-wave swell traveling in an arbitrary direction

The intensity wave like patterns observed in Synthetic Aperture Radar (SAR) are known to be caused by two mechanisms: the microwave radar cross sectional amplitude modulation due to tilt and hydrodynamic interaction of the long ocean waves, and intensity modulation due to the motion of the long ocean waves. Two dimensional closed form expressions of intensity wave patterns based on ocean wave swell are developed. They illustrate the relative importance of the amplitude and motion modulations; they also show that velocity bunching and a distortion due to the phase velocity of the ocean wave field are independent of the focus adjustment, provided that the second order temporal effects are neglected. Second order effects are small only over a limited range of ocean/radar parameters.

Rufenach, C. L.↗