Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SAPPHIRE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Photoluminescence Characterization of ZnO Thin Films Grown by RF- Sputtering

This article presents photoluminescence (PL) characterization of ZnO thin films deposited by radio-frequency magnetron sputtering method on sapphire and n-type Si (100) substrates. PL measurements were carried out at room temperature to investigate the energy band gaps and optical quality of the ZnO thin films. In order to draw a specific picture of surface morphology of ZnO thin films, atomic force microscope images were taken. All the results were compared to the results obtained from the bulk ZnO sample. The results revealed that the energy band gap of ZnO thin films grown on n-type Si (100) is higher than ZnO on sapphire. However, energy band gap of bulk ZnO is higher compared to both ZnO on n-type Si (100) and sapphire (Al{sub 2}O{sub 3}). This is probably due to the crystalline quality because good crystallinity increases the radiation recombination and hence increase the intensity of the NBE emission.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Anisotropic strain effects on the photoluminescence emission from heteroepitaxial and homoepitaxial nonpolar (Zn,Mg)O/ZnO quantum wells

We report on the properties of nonpolar a-plane (Zn,Mg)O/ZnO quantum wells (QW) grown by molecular beam epitaxy on r plane sapphire and a plane ZnO substrates. For the QWs grown on sapphire, the anisotropy of the lattice parameters of the (Zn,Mg)O barrier gives rise to an unusual in-plane strain state in the ZnO QWs, which induces a strong blue-shift of the excitonic transitions, in addition to the confinement effects. We observe this blue-shift in photoluminescence excitation experiments. The photoluminescence excitation energies of the QWs are satisfactorily simulated when taking into account the variation of the exciton binding energy with the QW width and the residual anisotropic strain. Then we compare the photoluminescence properties of homoepitaxial QWs grown on ZnO bulk substrate and heteroepitaxial QWs grown on sapphire. We show that the reduction of structural defects and the improvement of surface morphology are correlated with a strong enhancement of the photoluminescence properties: reduction of full width at half maximum, strong increase of the luminescence intensities. The comparison convincingly demonstrates the interest of homoepitaxial nonpolar QWs for bright UV emission applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

High-RRR thin-films of NB produced using energetic condensation from a coaxial, rotating vacuum ARC plasma (CEDTM)

We have recently demonstrated unprecedentedly high values of RRR (up to 542) in thin-films of pure Nb deposited on a-plane sapphire and MgO crystal substrates. The Nb films were grown using a vacuum arc discharge struck between a reactor grade Nb cathode rod (RRR {approx} 30) and a coaxial, semi-transparent Mo mesh anode, with a heated substrate placed just outside it. The substrates were pre-heated for several hours prior to deposition at different temperatures. Low pre-heat temperatures (<300 C) and deposition temperatures (<300 C) give low RRR (<50) films, whereas higher pre-heat (700 C) and coating temperatures (500 C) give RRR=214 on a-sapphire and RRR=542 on MgO. XRD (Bragg-Brentano scans and Pole Figures), EBSD and SIMS data reveal several features: (1) on asapphire, higher temperatures show better 3D registry for epitaxial growth of Nb; the crystal structure evolves from textured, polycrystalline (with twins) to single-crystal; (2) on MgO, there is a transition from {l_brace}110{r_brace} planes to {l_brace}100{r_brace} as the temperature is increased beyond 500 C. The dramatic increase in RRR (from {approx}10 at <300 C to {approx}500 at >600 C) is correlated with better epitaxial crystal structure in both a-sapphire and MgO substrate grown films. However, the SIMS data reveal that the most important requirement for high-RRR Nb films on either substrate is the reduction of impurities in the film, especially hydrogen. The hydrogen content in the MgO grown films is 1000 times lower than in bulk Nb tested as a reference from SRF cavity grade Nb. This result has potential implications for SRF accelerators. Coating bulk Nb cavities with an MgO layer followed by our CEDTM deposited Nb films, might create superior SRF cavities that would avoid Q-slope and operate at higher peak fields.

08 HYDROGEN↗

Magnetron-sputter deposition of high-indium-content n-AlInN thin film on p-Si(001) substrate for photovoltaic applications

Al{sub 0.278}In{sub 0.722}N thin films have been grown on p-type Si(001) and c-plane sapphire substrates by employing radio-frequency magnetron-sputter deposition at elevated temperatures. High-resolution x-ray diffraction, as well as pole-figure measurements, reveals no phase separation of the thin films. The Al{sub 0.278}In{sub 0.722}N film grown on p-Si(001) substrate is a typical fiber-texture with AlInN(0001)//Si(001) while that on the c-sapphire exhibits the onset of epitaxy. Microscopic studies reveal that the growth is dominated by a columnar mechanism and the average columnar grain diameter is about 31.5 and 50.8 nm on p-Si(001) and c-sapphire substrates, respectively. Photoluminescence at room-temperature exhibits a strong emission peak at 1.875 eV, smaller than the optical absorption edge (2.102 eV) but larger than the theoretical bandgap energy (1.70 eV), which is attributable to the band-filling effect, as is supported by the high electron density of 4.5 Multiplication-Sign 10{sup 20} cm{sup -3}. The n-Al{sub 0.278}In{sub 0.722}N/p-Si(001) heterostructure is tested for solar cells and the results are discussed based on the I-V characteristics and their fittings.

36 MATERIALS SCIENCE↗

Investigations of stochastic resonance in two-terminal device with vanadium dioxide film

The results of stochastic resonance investigation in a nonlinear system, consisting of a microstructure with a polycrystalline vanadium dioxide (VO{sub 2}) film grown on sapphire and resistor in series are reported. Nonlinearity of the system was provided due to insulator-metal phase transition in VO{sub 2}. In the stochastic resonance regime at 100 Hz signal frequency, the transition coefficient of signal-to-noise ratio reached 87 in contrast to 250 for microstructures with VO{sub 2} films grown on silica in our previous investigations. The measured characteristics of microstructures with VO{sub 2} films grown on silica and sapphire substrates were found to be qualitatively similar. For both substrates, a stochastic resonance was observed at threshold switching voltage from insulating to metallic state of VO{sub 2}. For sapphire substrate the output signal-to-noise ratio rose at higher signal frequencies. The stochastic resonance phenomenon in VO{sub 2} films is explained in terms of the monostable damped oscillator model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Stress-induced piezoelectric field in GaN-based 450-nm light-emitting diodes

We investigated the influence of the built-in piezoelectric field induced by compressive stress on the characteristics of GaN-based 450-nm light-emitting diodes (LEDs) prepared on sapphire substrates of different thicknesses. As the sapphire substrate thickness was reduced, the compressive stress in the GaN layer was released, resulting in wafer bowing. The wafer bowing-induced mechanical stress altered the piezoelectric field, which in turn reduced the quantum confined Stark effect in the InGaN/GaN active region of the LED. The flat-band voltage was estimated by measuring the applied bias voltage that induced a 180° phase shift in the electro-reflectance (ER) spectrum. The piezoelectric field estimated by the ER spectra changed by ∼110 kV/cm. The electroluminescence spectral peak wavelength was blue-shifted, and the internal quantum efficiency was improved by about 22% at a high injection current of 100 mA. The LED on the 60-μm-thick sapphire substrate exhibited the highest light output power of ∼59 mW at an injection current of 100 mA, with the operating voltage unchanged.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of hydrogen peroxide pretreatment on ZnO-based metal–semiconductor–metal ultraviolet photodetectors deposited using plasma-enhanced atomic layer deposition

In this study, zinc oxide (ZnO) films were deposited on sapphire substrates using a plasma-enhanced atomic layer deposition system. Prior to deposition, the substrates were treated with hydrogen peroxide (H{sub 2}O{sub 2}) in order to increase nucleation on the initial sapphire surface and, thus, enhance the quality of deposited ZnO films. Furthermore, x-ray diffraction spectroscopy measurements indicated that the crystallinity of ZnO films was considerably enhanced by H{sub 2}O{sub 2} pretreatment, with the strongest (002) diffraction peak occurring for the film pretreated with H{sub 2}O{sub 2} for 60 min. X-ray photoelectron spectroscopy also was used, and the results indicated that a high number of Zn–O bonds was generated in ZnO films pretreated appropriately with H{sub 2}O{sub 2}. The ZnO film deposited on a sapphire substrate with H{sub 2}O{sub 2} pretreatment for 60 min was applied to metal–semiconductor–metal ultraviolet photodetectors (MSM-UPDs) as an active layer. The fabricated ZnO MSM-UPDs showed improvements in dark current and ultraviolet–visible rejection ratios (0.27 μA and 1.06 × 10{sup 3}, respectively) compared to traditional devices.

36 MATERIALS SCIENCE↗

Structural contribution to the roughness of supersmooth crystal surface

Technological advances in processing crystals (Si, sapphire {alpha}-Al{sub 2}O{sub 3}, SiC, GaN, LiNbO{sub 3}, SrTiO{sub 3}, etc.) of substrate materials and X-ray optics elements make it possible to obtain supersmooth surfaces with a periodicity characteristic of the crystal structure. These periodic structures are formed by atomically smooth terraces and steps of nano- and subnanometer sizes, respectively. A model surface with such nanostructures is proposed, and the relations between its roughness parameters and the height of atomic steps are determined. The roughness parameters calculated from these relations almost coincide with the experimental atomic force microscopy (AFM) data obtained from 1 Multiplication-Sign 1 and 10 Multiplication-Sign 10 {mu}m areas on the surface of sapphire plates with steps. The minimum roughness parameters for vicinal crystal surfaces, which are due to the structural contribution, are calculated based on the approach proposed. A comparative analysis of the relief and roughness parameters of sapphire plate surfaces with different degrees of polishing is performed. A size effect is established: the relief height distribution changes from stochastic to regular with a decrease in the surface roughness.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

GaN-Ready Aluminum Nitride Substrates for Cost-Effective, Very Low Dislocation Density III-Nitride LED's

The objective of this project was to develop and then demonstrate the efficacy of a costeffective approach for a low defect density substrate on which AlInGaN LEDs can be fabricated. The efficacy of this “GaN-ready” substrate would then be tested by growing high efficiency, long lifetime InxGa1-xN blue LEDs. The approach used to meet the project objectives was to start with low dislocation density AlN single-crystal substrates and grow graded AlxGa1-xN layers on top. Pseudomorphic AlxGa1-xN epitaxial layers grown on bulk AlN substrates were used to fabricate light emitting diodes and demonstrate better device performance as a result of the low defect density in these layers when benched marked against state-of-the-art LEDs fabricated on sapphire substrates. The pseudomorphic LEDs showed excellent output powers compared to similar wavelength devices grown on sapphire substrates, with lifetimes exceeding 10,000 hours (which was the longest time that could reliably be estimated). In addition, high internal quantum efficiencies were demonstrated at high driving current densities even though the external quantum efficiencies were low due to poor photon extraction. Unfortunately, these pseudomorphic LEDs require high Al content so they emit in the ultraviolet. Sapphire based LEDs typically have threading dislocation densities (TDD) > 108 cm-2 while the pseudomorphic LEDs have TDD ≤ 105 cm-2. The resulting TDD, when grading the AlxGa1-xN layer all the way to pure GaN to produce a “GaN-ready” substrate, has varied between the mid 108 down to the 106 cm-2. These inconsistencies are not well understood. Finally, an approach to improve the LED structures on AlN substrates for light extraction efficiency was developed by thinning and roughening the substrate.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Revealing the Origin and Nature of the Buried Metal‐Substrate Interface Layer in Ta/Sapphire Superconducting Films

Abstract Despite constituting a smaller fraction of the qubit's electromagnetic mode, surfaces and interfaces can exert significant influence as sources of high‐loss tangents, which brings forward the need to reveal properties of these extended defects and identify routes to their control. Here, we examine the structure and composition of the metal‐substrate interfacial layer that exists in Ta/sapphire‐based superconducting films. Synchrotron‐based X‐ray reflectivity measurements of Ta films, commonly used in these qubits, reveal an unexplored interface layer at the metal‐substrate interface. Scanning transmission electron microscopy and core‐level electron energy loss spectroscopy identified an intermixing layer (≈0.65 ± 0.05 nm) at the metal‐substrate interface containing Al, O, and Ta atoms. Density functional theory modeling reveals that the structure and properties of the Ta/sapphire heterojunctions are determined by the oxygen content on the sapphire surface prior to Ta deposition for two atomic terminations of sapphire. Using a multimodal approach, we gained deeper insights into the interface layer between the metal and substrate, which suggests that the orientation of deposited Ta films depend on the surface termination of sapphire. The observed elemental intermixing at the metal‐substrate interface influences the thermodynamic stability and electronic behavior of the film, which may also affect qubit performance.

36 MATERIALS SCIENCE↗

Properties of Nb3Sn films fabricated by magnetron sputtering from a single target

Superconducting Nb3Sn films were fabricated on sapphire and fine grain Nb substrates by magnetron sputtering from a single stoichiometric Nb3Sn target. The structural, morphological and superconducting properties of the films annealed for 24 h at temperatures of 800-1000 {\deg}C were investigated. The effect of the annealing time at 1000 {\deg}C was examined for 1, 12, and 24 h. The film properties were characterized by X-ray diffraction, scanning electron microscopy, atomic force microscopy, energy dispersive X-ray spectroscopy, and Raman spectroscopy. The DC superconducting properties of the films were characterized by a four-point probe measurement down to cryogenic temperatures. The RF surface resistance of films was measured over a temperature range of 6-23 K using a 7.4 GHz sapphire-loaded Nb cavity. As-deposited Nb3Sn films on sapphire had a superconducting critical temperature of 17.21 K, which improved to 17.83 K when the film was annealed at 800 {\deg}C for 24 h. For the films annealed at 1000 {\deg}C, the surface Sn content was reduced to ~11.3 % for an annealing time of 12 h and to ~4.1 % for an annealing time of 24 h. The Raman spectra of the films confirmed the microstructural evolution after annealing. The RF superconducting critical temperature of the as-deposited Nb3Sn films on Nb was 16.02 K, which increased to 17.44 K when the film was annealed at 800 {\deg}C for 24 h.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Deconvoluting the Photonic and Electronic Response of 2D Materials: The Case of MoS 2

Evaluating and tuning the properties of two-dimensional (2D) materials is a major focus of advancing 2D science and technology. While many claim that the photonic properties of a 2D layer provide evidence that the material is "high quality", this may not be true for electronic performance. In this work, we deconvolute the photonic and electronic response of synthetic monolayer molybdenum disulfide. We demonstrate that enhanced photoluminescence can be robustly engineered via the proper choice of substrate, where growth of MoS 2 on r-plane sapphire can yield > 100x enhancement in PL and carrier lifetime due to increased molybdenum-oxygen bonding compared to that of traditionally grown MoS 2 on c-plane sapphire. These dramatic enhancements in optical properties are similar to those of super-acid treated MoS 2 , and suggest that the electronic properties of the MoS 2 are also superior. However, a direct comparison of the charge transport properties indicates that the enhanced PL due to increased Mo-O bonding leads to p-type compensation doping, and is accompanied by a 2x degradation in transport properties compared to MoS 2 grown on c-plane sapphire. This work provides a foundation for understanding the link between photonic and electronic performance of 2D semiconducting layers, and demonstrates that they are not always correlated.

36 MATERIALS SCIENCE↗

Demonstration of nearly pinhole-free epitaxial aluminum thin films by sputter beam epitaxy

Superconducting resonators with high quality factors have been fabricated from aluminum films, suggesting potential applications in quantum computing. Improvement of thin film crystal quality and removal of void and pinhole defects will improve quality factor and functional yield. Epitaxial aluminum films with superb crystallinity, high surface smoothness, and interface sharpness were successfully grown on the c-plane of sapphire using sputter beam epitaxy. This study assesses the effects of varying substrate preparation conditions and growth and prebake temperatures on crystallinity and smoothness. X-ray diffraction and reflectivity measurements yield extensive Laue oscillations and Kiessig thickness fringes for films grown at 200 °C under 15 mTorr Ar, indicating excellent crystallinity and surface smoothness; moreover, an additional substrate preparation procedure which involves (1) a modified substrate cleaning procedure and (2) prebake at 700 °C in 20 mTorr O 2 is shown by atomic force microscopy to yield nearly pinhole-free film growth while maintaining epitaxy and high crystal quality. The modified cleaning procedure is environmentally friendly and eliminates the acid etch steps common to conventional sapphire preparation, suggesting potential industrial application both on standard epitaxial and patterned surface sapphire substrates.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Growth and characterizations of semipolar (1122) InN

We report on metal-organic vapor phase epitaxial growth of (1122) InN on (1122) GaN templates on m-plane (1010) sapphire substrates. The in-plane relationship of the (1122) InN samples is [1123]{sub InN} Double-Vertical-Line Double-Vertical-Line [0001]{sub sapphire} and [1100]{sub InN} Double-Vertical-Line Double-Vertical-Line [1210]{sub sapphire}, replicating the in-plane relationship of the (1122) GaN templates. The surface of the (1122) InN samples and the (1122) GaN templates shows an undulation along [1100]{sub InN,GaN}, which is attributed to anisotropic diffusion of indium/gallium atoms on the (1122) surfaces. The growth rate of the (1122) InN layers was 3-4 times lower compared to c-plane (0001) InN. High resolution transmission electron microscopy showed a relaxed interface between the (1122) InN layers and the (1122) GaN templates, consistent with x-ray diffraction results. Basal plane stacking faults were found in the (1122) GaN templates but they were terminated at the InN/(1122) GaN interface due to the presence of misfit dislocations along the entire InN/GaN interface. The misfit dislocations were contributed to the fully relaxation and the tilts of the (1122) InN layers. X-ray photoelectron spectroscopy was used to determine the polarity of the grown (1122) InN sample, indicating an In-polar (1122) InN. The valence band maximum was determined to be at (1.7 {+-} 0.1) eV for the (1122) InN sample, comparable to In-polar c-plane InN.

36 MATERIALS SCIENCE↗

Effect of thickness on metal-to-semiconductor transition in 2-dimensional TiN thin films

Titanium nitride thin films have been grown on c-plane sapphire substrates using a pulsed laser deposition technique in the thickness range of 6–45 nm. X-ray diffraction (XRD) analysis has demonstrated TiN (111) as the preferred orientation of growth on the sapphire substrates. The XRD measurements have also indicated that orientational alignment between the TiN and the sapphire improved with an increase in the TiN film thickness. A change in the resistivity behavior of the TiN thin films from metallic to semiconducting has been observed as the TiN film thickness is reduced below 15 nm. Analyzing and fitting of TiN films’ conductivity data have shown that while the Arrhenius law governs their conductivity in the temperature range of 300–350 K, conductivity values of the films follow the variable range hopping mechanism below 300 K.

36 MATERIALS SCIENCE↗

Growth and structure of alpha-Ta films for quantum circuit integration

Tantalum films incorporated into superconducting circuits have exhibited low surface losses, resulting in long-lived qubit states. The remaining loss pathways originate in microscopic defects that manifest as two level systems (TLSs) at low temperatures. These defects limit performance, so careful attention to tantalum film structures is critical for optimal use in quantum devices. In this work, we investigate the growth of tantalum using magnetron sputtering on sapphire, Si, and photoresist substrates. In the case of sapphire, we present procedures for the growth of fully-oriented films with α-Ta [1 1 1]//Al2O3 [0 0 0 1] and α-Ta [1 −1 0]//Al2O3 [1 0 −1 0] orientational relationships and having residual resistivity ratio (RRR) ∼ 60 for 220 nm thick films. On Si, we find a complex grain texturing with Ta [1 1 0] normal to the substrate and RRR ∼ 30. We further demonstrate airbridge fabrication using Nb to nucleate α-Ta on photoresist surfaces. For the films on sapphire, resonators show TLS-limited quality factors of 1.3 ± 0.3 × 106 at 10 mK (for a waveguide gap and conductor width of 3 and 6 μm, respectively). Structural characterization using scanning electron microscopy, x-ray diffraction, low temperature transport, secondary ion mass spectrometry, and transmission electron microscopy reveal the dependence of residual impurities and screw dislocation density on processing conditions. The results provide practical insights into the fabrication of advanced superconducting devices including qubit arrays and guide future works on crystallographically deterministic qubit fabrication.

42 ENGINEERING↗

Spherical analyzers and monochromators for resonant inelastic hard X-ray scattering: a compilation of crystals and reflections

Resonant inelastic X-ray scattering (RIXS) experiments require special sets of near-backscattering spherical diced analyzers and high-resolution monochromators for every distinct absorption-edge energy and emission line. For the purpose of aiding the design and planning of efficient RIXS experiments, comprehensive lists of suitable analyzer reflections for silicon, germanium, α-quartz, sapphire and lithium niobate crystals were compiled for a multitude of absorption edges and emission lines. Analyzers made from lithium niobate, sapphire or α-quartz offer many choices of reflections with intrinsic resolutions currently unattainable from silicon or germanium. In some cases these materials offer higher intensities at comparable resolutions. While lithium niobate, sapphire or α-quartz analyzers are still in an early stage of development, the present compilation can serve as a computational basis for assessing expected and actual performance. With regard to high-resolution monochromators, bandpass and throughput calculations for combinations of double-crystal, high-heat-load and near-backscattering high-resolution channel-cuts were assembled. The compilation of these analyzer and monochromator data is publicly available on a website.

47 OTHER INSTRUMENTATION↗