Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Reactive intermediates”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Economic and Sustainability Assessment on Bio-Based 2,3-BDO Separation Approaches for Sustainable Aviation Fuel Production

Sustainable aviation fuel (SAF) plays a critical role in aviation decarbonization. SAF can be derived from lignocellulosic biomass, such as corn stover, via 2,3-butanediol (BDO) intermediate. BDO undergoes downstream upgrading, including dehydration, oligomerization, and hydrotreating, to make the hydrocarbon blend stock like SAF. Separating BDO from a fermentation broth is challenging. Water is more volatile than BDO, so energy consumption for ordinary distillation is prohibitively high. For BDO to be a feasible intermediate for sustainable biofuels such as SAF, the total energy usage for the BDO separation target was set to be no greater than 30% of its lower heating value (LHV). We have developed and explored less energy intensive separation technologies for processing dilute fermentation BDO broth into suitable feed for downstream upgrading. The combined economic and sustainability assessment was performed to assess the feasibility of select cost-effective process designs and comparisons with baseline technology (i.e., cascade vacuum distillation).

BIOMASS FUELS↗
DOE OSTI2026

Functionalized benzylamines from commercial kraft lignin

Benzylamines are key intermediates in pharmaceuticals, agrochemicals, and polymers, but their conventional production relies on benzyl chloride - a petroleum-derived compound with high toxicity and energy demands. Lignin, accounting for up to 30% of plant biomass, is the largest renewable source of aromatic carbon on Earth. However, its highly complex and recalcitrant structure poses a major barrier to efficient conversion into high-value chemicals. Here, in this study, we developed a catalytic approach to convert commercial kraft lignin into phenolic benzylamines through selective depolymerization and subsequent functionalization. We systematically evaluated the effects of three alcohol solvents, formic acid (FA), and a ruthenium-on‑carbon (Ru/C) catalyst on monophenol yield and selectivity. Up to 6.5 wt% monophenol yield was achieved using methanol (MeOH), FA, and Ru/C at 300 °C for 2 h. Quantum thermodynamic simulations based on the COSMO-RS model confirmed the superior solvation and reactivity of the MeOH + FA system, rationalizing observed product yield. The purified monophenolic products, primarily guaiacol and alkyl guaiacols, were then converted into functionalized benzylamines with >90% yield via a multicomponent Mannich reaction under mild conditions. Techno economic analysis (TEA) and life cycle assessment (LCA) underscore the importance of improving lignin depolymerization yields and expanding biorefinery scale. Solvent-only configurations outperform other options in both cost and emissions, with the methanol-only case performing the best ($\$$105 /kg and 26 kg CO 2e /kg) at a large-scale facility. This study establishes a scalable, bio-based pathway for producing benzylamines from commercial kraft lignin, advancing lignin valorization and offering a sustainable alternative to produce petrochemical-based benzylamines.

Catalytic reduction↗
DOE OSTI2025

Reaction Pathways over ZnZrO 2 -Based Catalysts and Catalytic Sorbents

Reactive capture and conversion (RCC) is a process intensification approach that integrates CO 2 capture and hydrogenation within a single unit, removing the CO 2 purification and storage steps of traditional process flow schemes. This alters the catalytic step from a traditional steady-state (SS) flow process to a transient capture and conversion cycle, which could lead to product distributions distinct from those observed in conventional SS experiments. Such differences are investigated in the combined capture and hydrogenation of carbon dioxide to methanol over a ZnZrO 2 catalyst and a ZnZrO 2 + NaNO 3 /Mg 3 AlO x catalytic sorbent (CS) using fixed-bed kinetic measurements, in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), and steady-state isotopic transient kinetic analysis-DRIFTS (SSITKA-DRIFTS). Under SS conditions, ZnZrO 2 produced methanol through sequential hydrogenation of HCOO* and CH 3 O* intermediates. On the contrary, CO was attributed primarily to CO 2 dissociation at oxygen vacancies, as supported by isotopic shifts and measured reaction orders. For the CS, isotopic switching experiments suggested that monodentate carbonate species (CO 3 2− , abbreviated as m-CO 3 2− ) act as active intermediates that can be hydrogenated to HCOO* and subsequently to CH 3 O. Under RCC conditions, in situ DRIFTS and isotopic experiments reveal that m-CO 3 2− species formed during the CO 2 capture step follow two competing routes upon H 2 exposure: (i) direct hydrogenation to methane on the sorbent domain or (ii) migration of m-CO 3 2− to the ZnZrO 2 domain, where they are hydrogenated to methanol through the HCOO pathway. Overall, RCC enables carbonate hydrogenation routes not observed under SS cofeed conditions. Thus, the reaction pathways and rates during RCC can be different from operation under conventional SS conditions, and the product distribution is determined here by competition between carbonate hydrogenation on sorbent sites and migration to ZnZrO 2 for methanol synthesis.

CCUS↗
DOE OSTI2024

Corrosion and Enhanced Hydrogen Evolution in Electrochemical Reduction of Ammonium Carbamate on Transition Metal Surfaces

Experiments and theory are combined to search for catalyst activity and stability descriptors for the direct reactive capture and conversion (RCC) of CO 2 in ammonia capture solutions using Cu, Ag, Au, Sn, and Ti electrodes. Two major phenomena emerge in RCC that are not predominant in the electrochemical CO 2 reduction (CO 2 R) reaction, namely, the rapid corrosion and restructuring of the catalyst in the presence of the CO 2 -ammonia adducts and the promotion of the competing hydrogen evolution reaction (HER). The prevalence of HER in RCC is correlated to the electrostatic attraction of the protonated amine to the electrode and the repulsion of the captured CO 2 , using the potential of zero charge (PZC). The stability of catalysts under RCC conditions is a function of the applied potential and cannot be readily predicted using binding energy descriptors commonly used in the prediction of CO 2 R activity. Finally, a direct correlation between calculated binding energies of CO 2 R intermediates, atomic oxygen, hydrogen, and ammonia and the activity and stability of transition metals for RCC cannot be found, highlighting the need for descriptors beyond those known for CO 2 R.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

Stability and convergence of nuclear detonations in white dwarf collisions

We investigate the numerical stability of thermonuclear detonations in 1D accelerated reactive shocks and 2D binary collisions of equal-mass magnetized and unmagnetized white dwarf stars. To achieve high resolution at initiation sites, we devised geometric gridding and mesh velocity strategies specially adapted to the unique requirements of head-on collisional geometries, scenarios in which one expects maximum production of iron-group products. We study the effects of grid resolution and the limiting of temperature, energy, and reactants for different stellar masses, separations, magnetic fields, inigenerationtial compositions, detonation mechanisms, and limiter parameters across a range of cell sizes from 1 to 100 km. Our results set bounds on the parameter space of limiter amplitudes for which both temperature- and energy-limiting procedures yield consistent and monotonically convergent solutions. Within these bounds, we find that grid resolutions of 5 km or better are necessary for uncertainties in total released energy and iron-group products to drop below 10%. Intermediate-mass products (e.g., calcium) exhibit similar convergence trends but with somewhat greater uncertainty. These conclusions apply equally to pure C/O white dwarfs, multispecies compositions (including helium shells), magnetized and unmagnetized cores, and either single or multiple detonation scenarios.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Reactivity of Iridium Complexes of a Triphosphorus-Pincer Ligand Based on a Secondary Phosphine. Catalytic Alkane Dehydrogenation and the Origin of Extremely High Activity

The selective functionalization of alkanes and alkyl groups is a major goal of chemical catalysis. Toward this end, a bulky triphosphine with a central secondary phosphino group, bis(2-di-t-butyl-phosphinophenyl)phosphine ( tBu P H PP), has been synthesized. When complexed to iridium, it adopts a meridional (“pincer”) configuration. The secondary phosphino H atom can undergo migration to iridium to give an anionic phosphido-based–pincer ( tBu PPP) complex. Stoichiometric reactions of the ( tBu PPP)Ir complexes reflect a distribution of steric bulk around the iridium center in which the coordination site trans to the phosphido group is quite crowded; one coordination site cis to the phosphido is even more crowded; and the remaining site is particularly open. The ( tBu PPP)Ir precursors are the most active catalysts reported to date for dehydrogenation of n-alkanes, by about 2 orders of magnitude. The electronic properties of the iridium center are similar to that of well-known analogous ( R PCP)Ir catalysts. Accordingly, DFT calculations predict that ( tBu PPP)Ir and ( tBu PCP)Ir are, intrinsically, comparably active for alkane dehydrogenation. While dehydrogenation by ( R PCP)Ir proceeds through an intermediate trans-(PCP)IrH 2 (alkene), ( tBu PPP)Ir follows a pathway proceeding via cis-(PPP)IrH 2 (alkene), thereby circumventing unfavorable placement of the alkene at the bulky site trans to phosphorus. ( tBu PPP)Ir and ( tBu PCP)Ir, however, have analogous resting states: square planar (pincer)Ir(alkene). Alkene coordination at the crowded trans site is therefore unavoidable in the resting states. Furthermore, the resting state of the ( tBu PPP)Ir catalyst is destabilized by the architecture of the ligand, and this is largely responsible for its unusually high catalytic activity.

02 PETROLEUM↗
DOE OSTI2022

High‐Performance and Durable Fuel Cells using Co/Sr‐Free Fluorite‐Based Mixed Conducting (Pr,Ce)O 2‐δ Cathode

Abstract A major challenge to overcome in demonstrating solid oxide fuel cells (SOFCs) to be suitable as efficient and environmentally friendly energy conversion devices capable of addressing pressing clean energy and environmental needs is to surmount chemical and thermo‐mechanical instabilities in their operational phase. To date, perovskite‐based mixed conducting cathodes, which include inherent Co and Sr elements for enhanced reactivity and conductivity, have been intensively studied. These Co/Sr‐based oxides, however, exhibit severe thermochemical expansion and suffer from Sr surface segregation, ultimately degrading the electrode performance. Here, high‐performance and durable SOFCs are demonstrated by employing a Co/Sr‐free fluorite‐based mixed conducting (Pr,Ce)O 2‐δ (PCO) cathode eminently compatible with fluorite‐based solid electrolytes. The nanocolumnar PCO electrode developed in this study provides not only a remarkable low level of electrode resistance (e.g., ≈0.05 Ω cm 2 at 600 °C) but also exceptional long‐term stability (e.g., a degradation rate 15 times slower compared to the state‐of‐the‐art La 0.6 Sr 0.4 CoO 3‐δ perovskite). The competitive peak power densities of an anode‐supported single cell with the PCO cathode are also successively achieved, recording a value of 0.92 W cm −2 at 600 °C. These findings herald the development of new Co/Sr‐free electrodes for SOFCs at intermediate temperatures.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2022

Critical role of acceptor dopants in designing highly stable and compatible proton-conducting electrolytes for reversible solid oxide cells

Proton-conducting electrolytes are receiving increasing attention due to their high ionic conductivity at intermediate temperatures, enabling the operation of solid oxide cells with high energy efficiency at low cost. However, the effect of B-site dopants on the properties of doped barium hafnate-cerate electrolyte materials, especially in single cells under operating conditions, has not been systematically studied. Here we report our findings in the development of a series of proton-conducting electrolytes with a general formula of BaHf 0.1 Ce 0.7 R 0.2 O 3–δ (BHCR172, R = Yb, Er, Y, Gd, Sm). Here, the results reveal that electrical conductivity, ionic transference number, chemical stability against steam and CO 2 , and compatibility with NiO during sintering are all closely correlated with the dopant size. In particular, the reaction with NiO is found to strongly affect the properties of the electrolytes and hence cell performance. Among all tested compositions, BaHf 0.1 Ce 0.7 Yb 0.2 O 3–δ (BHCYb172) shows excellent chemical stability and minimal reactivity towards NiO, as predicted from density functional theory (DFT)-based calculations and confirmed by experimental results. In addition, proton-conducting reversible solid oxide cells (P-ReSOCs) based on the optimized electrolyte composition, BHCYb172, demonstrate exceptional performance and stability, achieving a remarkable peak power density of 1.74 W cm –2 (O 2 as the oxidant) at 600 °C in the fuel cell mode and a high current density of 2.0 A cm –2 at 1.3 V and 600 °C in the steam electrolysis mode while maintaining excellent durability for over 1000 h.

25 ENERGY STORAGE↗
DOE OSTI2023

Constraining the Reaction Rate of Criegee Intermediates with Carboxylic Acids during the Multiphase Ozonolysis of Aerosolized Alkenes

Criegee intermediates (CIs) are central to the ozonolysis of unsaturated organic compounds, controlling the formation of small fragmentation reaction products and higher molecular weight oligomeric compounds through competing unimolecular and bimolecular pathways. In particular, the reaction of thermalized CI with carboxylic acids (RCOOH) to produce oligomeric α-acyloxyalkyl hydroperoxides (AAHPs) is of interest to the chemical transformation of organic compounds in the atmosphere. In the gas phase, the CI + RCOOH reaction proceeds at supercollisional rates, consistent with a barrierless reaction mechanism. However, the rate of this reaction in condensed phases remains uncertain. Here, we report the results of aerosol flow tube studies of the ozonolysis of submicron organic aerosol containing mixtures of an internal n-alkene (Z-9-tricosene, tri) and a saturated acid (2-hexyldecanoic acid, HDA). The decay of the reactants and formation of reaction products are monitored using atmospheric pressure chemical ionization mass spectrometry (APCI–MS). A 6-fold decrease in the reactive uptake of ozone is observed with increasing acid concentration, consistent with a previous study using alcohol additives. The decay of HDA with ozone exposure shows that HDA scavenges CIs at rates comparable to competing unimolecular pathways involving CIs. The decay kinetics of HDA are analyzed using a simple kinetic model in order to constrain the ratio of the CI + RCOOH and unimolecular CI rate constants. Empirical fitting to this model, combined with theoretical estimates of the unimolecular loss rate, yields a CI + RCOOH rate constant of 1.85 ± 0.27 × 10 –19 cm 3 molec –1 s –1 , which is six orders of magnitude slower than the expected diffusion limit in a liquid organic matrix. Stochastic kinetic simulations are conducted with different values of the CI + RCOOH rate constant to validate this result and show that the diffusion-limited rate is indeed much too rapid to reproduce the experimental results.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Solution and Active Site Speciation Drive Selectivity for Electrocatalytic Reactive Carbon Capture in Diethanolamine over Ni–N–C Catalysts

Direct conversion of captured forms of carbon, or reactive carbon capture (RCC), presents an opportunity to reduce the energy intensity and cost of direct CO 2 utilization from dilute sources. While amine-based sorbents effectively capture CO 2 , their use for RCC presents numerous challenges with typical pure metal catalysts used for electrochemical CO 2 reduction (CO 2 R). Here, using both theory and experiments, we find that Ni–N–C single atom catalysts are effective for RCC conversion to CO using a diethanolamine sorbent, in contrast to pure metal catalysts. Computational analysis reveals that RCC can proceed directly through direct reduction of the sorbent-CO 2 adduct or indirectly by C–N bond breaking facilitating CO 2 adsorption and subsequent reduction. We find that the latter mechanism is most prevalent at low overpotentials where we experimentally observe RCC selectivity. We also find experimentally that the rate of CO production for RCC with Ni–N–C catalysts can exceed pure bicarbonate solutions at intermediate sorbent concentration (0.1–0.5 M DEA) under dilute (10–25%) streams of CO 2 at low overpotentials. The coordination environment of Ni sites and the solution speciation influence their RCC activity, with changes in protonation to coordinating N/C atoms resulting in changing the RCC mechanism and consequent activity. In situ X-ray absorption spectroscopy and computational analysis reveal restructuring under RCC conditions due to hydrogen coadsorption with DEA that limits the stability of Ni–N–C catalysts. This work highlights the importance of carefully controlling the catalyst and solution environment to achieve active and stable RCC electrocatalysis.

Chemistry↗
DOE OSTI2023

Inelastic relaxation processes in amorphous sodium silicates

During fracture amorphous oxides exhibit irreversible processes, including inelastic and nonrecoverable relaxation effects in the process zone surrounding the crack tip. Here, classical molecular dynamics simulations were used with a reactive forcefield to evaluate inelastic relaxation processes in five amorphous sodium silicate compositions. Overall, the 20% Na 2 O-SiO 2 (NS20) composition exhibited the most inelastic relaxation, followed by the 15% Na 2 O-SiO 2 (NS15) composition, the 25% Na 2 O-SiO 2 (NS25) composition, and finally the 10% (NS10) and 30% (NS30) Na 2 O-SiO 2 compositions. Coordination analysis of the Na + ions identified that during inelastic relaxation the Na+ ions were increasingly coordinated by nonbridging oxygens (NBOs) for the NS10 and NS15 compositions, which was supported by radial analysis of the O-Na-O bond angles surrounding the crack tip. Across the sodium silicate compositional range, two different inelastic relaxation mechanism were identified based on the amount of bridging oxygens (BOs) and NBOs in the Na+ ion coordination shell. At lower (NS10) and higher (NS30) sodium compositions, the entire structured relaxed toward the crack tip. In contrast at intermediate sodium concentrations (NS20) the Na + ion migrates toward the crack tip separately from the network structure. By developing a fundamental understanding of how modified silica systems respond to static stress fields, we will be able to predict how varying amorphous silicate systems exhibit slow crack growth.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Structure and Reactivity of Binuclear Cu Active Sites in Cu-CHA Zeolites for Stoichiometric Partial Methane Oxidation to Methanol

Aluminosilicate zeolites exchanged with copper ions facilitate partial methane oxidation (PMO) to methanol in stoichiometric oxidation and reduction cycles, yet the identities of active Cu sites and details of the reaction mechanism remain debated. Here, we use the high-symmetry chabazite (CHA) zeolite framework as a model support to probe the relationship between bulk composition, Cu speciation, and response to various oxidizing and reducing treatments. Density functional theory and first-principles thermodynamics combined with statistical models reveal that Cu speciation and composition depend strongly on Al configuration and external gas conditions. Cu-CHA samples were synthesized to survey broad regions of Si/Al and Cu/Al composition space and framework Al proximity. Characterization by in situ X-ray absorption and UV–visible spectroscopy during exposure to different oxidation conditions reveal that the extent of Cu oxidation is sensitive to activation conditions and thus that both kinetic and thermodynamic factors influence Cu oxidizability in a given material. Similar characterizations during CO reduction reveal that CO titrates Cu 2+ in amounts suggesting the presence of both O- and O 2 -bridged species. In contrast, CH 4 and autoreduction (He) treatments reduce similar but smaller numbers of Cu sites than CO, implicating O 2 -bridged Cu dimers as a potential common intermediate in the former reduction pathways. Furthermore, a systematic increase in methanol yields (per Cu) in stoichiometric PMO cycles increase with the fraction of binuclear O x -bridged Cu sites suggests these species as active sites, as depicted in an updated PMO reaction mechanism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Unraveling Electronic Effects that Influence the Bimolecular Chemistry of Fluorinated Criegee Intermediates

Ozonolysis is important for the removal of unsaturated volatile organic compounds emitted into the Earth's atmosphere. The alkene + ozone reaction (alkene ozonolysis) forms a carbonyl oxide – a Criegee intermediate (CI). CIs are interesting from an atmospheric chemistry perspective. They are implicated in enhancing the oxidizing capacity of the troposphere and in secondary organic aerosol formation. CIs may participate in bimolecular reactions with trace atmospheric vapors like water and methanol. Here, the chemistry of the two isomers of CFHOO and of CF 3 CHOO with water, water dimer, and methanol is explored. The present study confirms that the syn-conformer is the minimum energy structure for both CIs and that the reactions of anti-CFHOO display slightly lower activation energies cf. syn-CFHOO, thus promoting faster reaction. For both syn- and anti-CFHOO, the energy barrier in the pathway to adding water, water dimer, or methanol is lower—and the overall reaction exoergicity greater—than for the corresponding reactions involving the nonfluorinated analogue, CH 2 OO. Here, the corresponding bimolecular reaction rates are thus predicted to be faster for CFHOO than CH 2 OO. Similar reactivity trends are found when comparing the same reactions of syn-CF 3 CHOO, cf. syn-CH 3 CHOO, but not when comparing the energetics of the reactions involving anti-CF 3 CHOO cf. anti-CH 3 CHOO.

Guidry, Lily M. [University of Louisiana at Lafaye↗
DOE OSTI2020

Computational and Experimental Evaluation of Peroxide Oxidants for Amine-Peroxide Redox Polymerization

Amine–peroxide redox polymerization (APRP) is the prevalent method for producing radical-based polymers in the many industrial and medical applications where light or heat activation is impractical. We recently developed a detailed description of the APRP initiation process through a combined computational and experimental effort to show that APRP proceeds through SN2 attack by the amine on the peroxide, followed by the rate-determining homolysis of the resulting intermediate. Using this new mechanistic understanding, a variety of peroxides were computationally predicted to initiate APRP with fast kinetics. In particular, the rate of APRP initiation can be improved by radical and anion stabilization through increased p-electron conjugation or by increasing the electrophilicity of the peroxy bond through the addition of electron-withdrawing groups. On the other hand, the addition of electron-donating groups lowered the initiation rate. These design principles enabled the computational prediction of several new peroxides that exhibited improved initiation rates over the commonly used benzoyl peroxide. For example, the addition of nitro groups (NO2) to the para positions of benzoyl peroxide resulted in a theoretical radical generation rate of 1.9 × 10–9 s–1, which is ~150 times faster than the 1.3 × 10–11 s–1 radical generation rate observed with unsubstituted benzoyl peroxide. These accelerated kinetics enabled the development of a redox-based direct-writing process that exploited the extremely rapid reactivity of an optimized redox pair with a custom inkjet printer, capable of printing custom shapes from polymerizing resins without heat or light. Furthermore, the application of more rapid APRP kinetics could enable the acceleration of existing industrial processes, make new industrial manufacturing methods possible, and improve APRP compatibility with biomedical applications through reduced initiator concentrations that still produce rapid polymerization rates.

functional polymers↗
DOE OSTI2025

Rheology and engine performance of very low sulfur fuel oil blended with 10% fast pyrolysis and hydrothermal liquefaction oils in a 2-stroke crosshead engine

The performance and emissions for a downscaled single-cylinder 2-stroke crosshead engine were determined for a very low sulfur fuel oil (VLSFO) when blended with 10 wt.% fast pyrolysis (FP) or hydrothermal liquefaction (HTL) bio-intermediates. The FP and HTL oils were derived from biomass and were observed to contain lower molecular weight (MW) hydrocarbons than neat VLSFO (which was evaluated as a baseline comparison). The addition of either biofuel reduced the overall viscosity of the VLSFO. Aging tests at 50, 90, and 120°C showed that the dynamic viscosity of VLSFO increased with exposure time up to two weeks. Similar trends were observed for the FP and HTL blends, but a pronounced spike in viscosity occurred for these fuels during the early period of exposure. None of the viscosity increases exceeded the operational limits of fuel system pumps. Engine performance studies were conducted under low, medium and high load operational settings. The relative performance of the test fuels was highly dependent on operating condition. In general, the engine results for the three test fuels were similar, but modest improvements in brake thermal efficiency and brake specific fuel consumption were observed, which may be attributed to the heightened reactivity of low molecular weight fraction of the FP and HTL oils.

09 BIOMASS FUELS↗
DOE OSTI2026

Upcycling waste PET into functional multiblock copolymers through controlled macromolecular design

Poly(ethylene terephthalate) (PET) oligomers derived from glycolysis depolymerization were converted into multiblock copolymers through diisocyanate-mediated coupling with dihydroxy-terminated oligomers, enabling precise control over copolymer sequence distribution, connectivity, and mechanical performance. Here, we demonstrate that telechelic PET oligomers isolated directly from depolymerized consumer waste can serve as reactive building blocks for the formation of segmented multiblock copolymers, eliminating the need to revert to monomeric feedstocks. Dihydroxy-terminated PET oligomers (Mw ≈ 8 kg mol−1) were coupled with poly(ethylene oxide) (PEO, Mw ≈ 4 kg mol−1) to form PET-PEO multiblock copolymers with high molar mass (Mw ≈ 160 kg mol−1). We further show that the timing of end-capping reactions provides a key control parameter that governs the competition between chain extension and termination, thereby dictating the resulting multiblock architecture and molecular-weight evolution. Evaluation of their mechanical properties reveals that virgin PET exhibits high modulus (∼3 GPa) and strength (43 MPa) but limited ductility (<10% elongation). In contrast, PET–PEO multiblock copolymers retain comparable tensile strength (44 MPa), albeit while exhibiting dramatically enhanced ductility (>90% elongation), forming tougher materials with efficient stress transfer between the rigid PET domains and the flexible PEO segments. When incorporated into PET/PEO blends at low loadings, the multiblock copolymers serve as effective compatibilizers, yielding materials with an intermediate modulus (1.1–1.2 GPa) and improved elongation compared to uncompatibilized blends. Furthermore, the presence of PEO blocks increases water uptake and gas permeability relative to virgin PET, reflecting the tunability of molecular transport through the copolymeric blocks. To our knowledge, this represents the first report of PET–PEO multiblock copolymers derived from post-consumer PET for gas transport applications. These results demonstrate that multiblock copolymer formation from telechelic PET oligomers provides a versatile platform for tailoring the mechanical and transport behavior of polyester-based materials through controlled macromolecular design and establishes a generalizable strategy for transforming consumer plastic waste into functional segmented polymers without requiring complete depolymerization to monomers.

Watson-Sanders, Shelby [Department of Chemistry, U↗
DOE OSTI2020

The Role of Retardation, Attachment and Detachment Processes during Microbial Coal-Bed Methane Production after Organic Amendment

Microbially enhanced coal-bed methane could allow for a more sustainable method of harvesting methane from un-mineable coaldbeds. The model presented here is based on a previously validated batch model; however, this model system is based on upflow reactor columns compared to previous experiments and now includes flow, transport and reactions of amendment as well as intermediate products. The model implements filtration and retardation effects, biofilm decay, and attachment and detachment processes of microbial cells due to shear stress. The model provides additional insights into processes that cannot be easily observed in experiments. This study improves the understanding of complex and strongly interacting processes involved in microbially enhanced coal-bed methane production and provides a powerful tool able to model the entire process of enhancing methane production and transport during microbial stimulation.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Dramatic Slowdown of Bimolecular Reactions of Criegee Intermediates in Organic Aerosols

Although Criegee intermediates (CIs) play a central role in driving the transformation of organic molecules, their condensed-phase reaction kinetics remains poorly understood. While CIs undergo unimolecular decomposition to produce OH radicals, stabilized CIs participate in a host of other bimolecular reactions forming larger molecular weight products, including secondary ozonides (kSOZ), alkoxyalkyl hydroperoxides (kAlAHP), and acyloxyalkyl hydroperoxides (kAcAHP). Here, we demonstrate, using prior literature and new measurements of heterogeneous organic aerosol reactions using O3 or OH radicals, that these condensed-phase bimolecular reaction rate coefficients kSOZ (10-20 cm3·molecule-1·s-1), kAlAHP, and kAcAHP (10-19 cm3·molecule-1·s-1) are 7-10 orders of magnitude slower than analogous gas-phase reactions (∼ 10-10-10-13 cm3·molecule-1·s-1). This contrasts with current evidence that the rate coefficients for unimolecular steps in the condensed phase are similar in magnitude to those in the gas phase. Kinetic models using gas-phase-like bimolecular coefficients consistently overestimate the importance of bimolecular relative to unimolecular pathways while underpredicting the aerosol reactivity by up to 30-fold. The slowing of bimolecular reactivity in aerosols is likely due to solvation effects and the increased steric hindrance of larger molecular weight CIs and their scavengers in the condensed phase. These results challenge the conventional view that the high reactant density of an organic aerosol should favor bimolecular over unimolecular reactions, underscoring the need for more accurate CI condensed-phase rate constants for reliable modeling of oxidative processes across a diverse set of atmospheric and environmental systems.

Zeng, Meirong↗