SEARCH · Engineering Papers

Results for “Radiative transfer simulations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

All sources NASA NTRS DOE OSTI

NASA NTRS1984

Spectral absorption of solar radiation in cloudy atmospheres A 20/cm model

A radiative transfer model based on both LOWTRAN transmission functions (at a 20/cm resolution), and Monte Carlo simulations of wavelength distributions, is used to determine the spectral absorption of solar radiation in typical water clouds. This yields the relative absorption by the vapor and droplets within each cloud. The results obtained indicate a slightly lower absorption than had previously been found, with boundary layer clouds typically absorbing 9 percent of the terrestrial insolation for an overhead sun. This absorption is strongly dependent on the presence of water vapor above the cloud top and solar zenith angle. Droplets, rather than vapor, are shown to be the dominant absorbers within the cloud except in the absence of water vapor above the cloud top.

Davies, R.↗

NASA NTRS2000

Intercomparison of Models Representing Direct Shortwave Radiative Forcing by Sulfate Aerosols

The importance of aerosols as agents of climate change has recently been highlighted. However, the magnitude of aerosol forcing by scattering of shortwave radiation (direct forcing) is still very uncertain even for the relatively well characterized sulfate aerosol. A potential source of uncertainty is in the model representation of aerosol optical properties and aerosol influences on radiative transfer in the atmosphere. Although radiative transfer methods and codes have been compared in the past, these comparisons have not focused on aerosol forcing (change in net radiative flux at the top of the atmosphere). Here we report results of a project involving 12 groups using 15 models to examine radiative forcing by sulfate aerosol for a wide range of values of particle radius, aerosol optical depth, surface albedo, and solar zenith angle. Among the models that were employed were high and low spectral resolution models incorporating a variety of radiative transfer approximations as well as a line-by-line model. The normalized forcings (forcing per sulfate column burden) obtained with the several radiative transfer models were examined, and the discrepancies were characterized. All models simulate forcings of comparable amplitude and exhibit a similar dependence on input parameters. As expected for a non-light-absorbing aerosol, forcings were negative (cooling influence) except at high surface albedo combined with small solar zenith angle. The relative standard deviation of the zenith-angle-averaged normalized broadband forcing for 15 models-was 8% for particle radius near the maximum in this forcing (approx. 0.2 microns) and at low surface albedo. Somewhat greater model-to-model discrepancies were exhibited at specific solar zenith angles. Still greater discrepancies were exhibited at small particle radii and much greater discrepancies were exhibited at high surface albedos, at which the forcing changes sign; in these situations, however, the normalized forcing is quite small quite small. Discrepancies among the models arise from inaccuracies in Mie calculations, differing treatment of the angular scattering phase function, differing wavelength and angular resolution, and differing treatment of multiple scattering. These results imply the need for standardized radiative transfer methods tailored to the direct aerosol forcing problem. However, the relatively small spread in these results suggests that the uncertainty in forcing arising from the treatment of radiative forcing of a well-characterized aerosol at well-specified surface albedo is smaller than some of the other sources of uncertainty in estimates of direct forcing by anthropogenic sulfate aerosols and anthropogenic aerosols generally.

Boucher, O.↗

NASA NTRS1974

Solution of the radiative transfer theory problems by the Monte Carlo method

The Monte Carlo method is used for two types of problems. First, there are interpretation problems of optical observations from meteorological satellites in the short wave part of the spectrum. The sphericity of the atmosphere, the propagation function, and light polarization are considered. Second, problems dealt with the theory of spreading narrow light beams. Direct simulation of light scattering and the mathematical form of medium radiation model representation are discussed, and general integral transfer equations are calculated. The dependent tests method, derivative estimates, and solution to the inverse problem are also considered.

Marchuk, G. I.↗

NASA NTRS1989

Simulated appearance of an evolving supercell hail storm at SSM/I microwave frequencies

The contribution of distinct classes of hydrometeors generated from a cloud model to top-of-atmosphere microwave brightness temperatures is studied at the four separate frequencies of the Special Sensor Microwave Imager (SSM/I). The relative radiative role of individual modes of hydrometeors during the evolution of a severe thunderstorm is examined using a microwave radiative transfer model coupled with a three-dimensional cloud model capable of simulating the essential dynamical and microphysical features of an intense hail store. Consideration is given to plans to use the simulation results with actual multichannel measurements from SSM/I to provide a framework for multispectral precipitation retrieval algorithms.

Smith, Eric A.↗

NASA NTRS1990

Simulated and observed 37 GHz emission over Africa

A model for simulating polarized 37-GHz microwave emissions from vegetated surfaces is proposed. An equation expressing the radiative transfer is solved using a two-point Gauss quadrature method. Surface temperature, reflectance, normalized difference, and polarized brightness temperatures are obtained from processed multispectral satellite data. The model simulations are evaluated against satellite data collected between January 1982 and December 1983 along a transect going from rain forest to hot desert over Africa (0 deg to 20 deg N, 11 deg E). It is found that the temporal variation of the average brightness temperature matches closely the surface temperature. The seasonal variation of the polarization difference is confined within the latitude band of 8 deg to 18 deg N, but the normalized difference continues to show seasonal variation south of 8 deg N. The relations between the polarization difference and the normal difference and between the polarization difference and the reflectance are considered to be nonlinear and almost linear, respectively.

Choudhury, B. J.↗

NASA NTRSDate not supplied

TPSAS-NF1676L-18074-DND

Motivations - Radiative Transfer (RT) model is a component in satellite remote sensing (Observation System Simulation Experiment, sensor performance end-to-end simulations or sensitivity studies, and retrieval and data assimilations); - Line-by-line RT model is too slow, over a million RT needed to cover infrared spectral region; - Traditional Channel-based RT models deal with one channel at a time. Modern sensors have thousands of channels and 0.1-1 million spectra per day, only 4-10% of data are used in satellite data assimilations (too slow for climate OSSE). It is essential to have a RT model: - Accurate and fast - Works in all spectral regions - Includes as accurate physics as possible - Takes advantage of spectral correlations - Can handle cloud and aerosols PCRTM (Principal Component-based Radiative Transfer model) was developed to satisfy the need listed above.

Xu Liu↗

NASA NTRS2010

Observing System Simulation Experiment (OSSE) for the HyspIRI Spectrometer Mission

The OSSE software provides an integrated end-to-end environment to simulate an Earth observing system by iteratively running a distributed modeling workflow based on the HyspIRI Mission, including atmospheric radiative transfer, surface albedo effects, detection, and retrieval for agile exploration of the mission design space. The software enables an Observing System Simulation Experiment (OSSE) and can be used for design trade space exploration of science return for proposed instruments by modeling the whole ground truth, sensing, and retrieval chain and to assess retrieval accuracy for a particular instrument and algorithm design. The OSSE in fra struc ture is extensible to future National Research Council (NRC) Decadal Survey concept missions where integrated modeling can improve the fidelity of coupled science and engineering analyses for systematic analysis and science return studies. This software has a distributed architecture that gives it a distinct advantage over other similar efforts. The workflow modeling components are typically legacy computer programs implemented in a variety of programming languages, including MATLAB, Excel, and FORTRAN. Integration of these diverse components is difficult and time-consuming. In order to hide this complexity, each modeling component is wrapped as a Web Service, and each component is able to pass analysis parameterizations, such as reflectance or radiance spectra, on to the next component downstream in the service workflow chain. In this way, the interface to each modeling component becomes uniform and the entire end-to-end workflow can be run using any existing or custom workflow processing engine. The architecture lets users extend workflows as new modeling components become available, chain together the components using any existing or custom workflow processing engine, and distribute them across any Internet-accessible Web Service endpoints. The workflow components can be hosted on any Internet-accessible machine. This has the advantages that the computations can be distributed to make best use of the available computing resources, and each workflow component can be hosted and maintained by their respective domain experts.

Turmon, Michael J.↗

DOE OSTI2023

Observational signatures of circumbinary discs – I. Kinematics

We present five morphological and kinematic criteria to aid in asserting the binary nature of a protoplanetary disc, based on 3D hydrodynamical simulations of circumbinary discs post-processed with Monte Carlo radiative transfer. We find that circumbinary discs may be identified by (i) a central cavity, (ii) spiral arms both in and outside of their central cavities, (iii) non-localized perturbations in their iso-velocity curves, (iv) asymmetry between the lines of maximum speed of the blue shifted and redshifted wings, and (v) asymmetry between the area of the blue shifted and redshifted wings. In this study, we provide quantitative metrics for the last two criteria that can be used, in conjunction with the morphological criteria, to signal whether a protoplanetary disc is likely to be a circumbinary disc.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2022

Mapping the Planetary Wake in HD 163296 with Kinematics

Abstract We map the planetary wake associated with the embedded protoplanet creating the CO kink in the disk of HD 163296. We show that the wake can be traced by a series of correlated perturbations in the peak velocity map. The sign change of the perturbations across the disk’s major axis confirms that the wake induces predominantly radial motion, as predicted by models of planet–disk interaction. These results provide the first direct confirmation of planet wakes generated by Lindblad resonances. Mapping the wake provides a constraint on the disk aspect ratio, which is required to measure the mass of the planet.

79 ASTRONOMY AND ASTROPHYSICS↗

NASA NTRS1982

Interpretation of satellite-observed thunderstorm anvil structure

The radiative characteristics of an anvil plume sensed by satellite radiometers are studied to discern the reason for an observed 'V' pattern of colder temperatures and a corresponding internal warm region. The measured black body temperature is affected by the ice water content and particle distributions in the cloud layer. Attention is given to 'V' anvil structure examined by Haynesfield et al. (1979). The GOES satellite IR data are treated with a plane parallel geometric radiative transfer model and a particle trajectory model is used to simulate ice particle concentrations downwind from a strongly divergent cloud top. Output from the two models indicate the 'V' pattern arises from divergence in the storm anvil. The particle concentration was elevated within the V-shaped region, causing lower temperatures in the V arms. The V is produced by strong upper level flow as well as strong mass and moisture divergence in the storm outflow.

Heymsfield, G. M.↗

NASA NTRS2003

Combustion Of Metals In Reduced Gravity And Extraterrestrial Environments

The recent focus of this research project has been to model the combustion of isolated metal droplets and, in particular, to couple the existing theories and formulations of phenomena such as condensation, reaction kinetics, radiation, and surface reactions to formulate a more complete combustion model. A fully transient, one-dimensional (spherical symmetry) numerical model that uses detailed chemical kinetics, multi-component molecular transport mechanisms, condensation kinetics, and gas phase radiation heat transfer was developed. A coagulation model was used to simulate the particulate formation of MgO. The model was used to simulate the combustion of an Mg droplet in pure O2 and CO2. Methanol droplet combustion is considered as a test case for the solution method for both quasi-steady and fully transient simulations. Although some important processes unique to methanol combustion, such as water absorption at the surface, are not included in the model, the results are in sufficient agreement with the published data. Since the major part of the heat released in combustion of Mg, and in combustion of metals in general, is due to the condensation of the metal oxide, it is very important to capture the condensation processes correctly. Using the modified nucleation theory, an Arrhenius type rate expression is derived to calculate the condensation rate of MgO. This expression can be easily included in the CHEMKIN reaction mechanism format. Although very little property data is available for MgO, the condensation rate expression derived using the existing data is able to capture the condensation of MgO. An appropriate choice of the reference temperature to calculate the rate coefficients allows the model to correctly predict the subsequent heat release and hence the flame temperature.

Abbud-Madrid, A.↗

NASA NTRS1992

Dose rate, dose-equivalent rate, and quality factor in SLS-1

A tissue-equivalent proportional counter (TEPC) sensitive to the lineal energy range of 0.26-300 keV micrometer-1 was flown on STS-40 (39 degrees x 278 km x 296 km) inside the Spacelab. This instrument was previously flown on STS-31 but was modified to provide a finer resolution at lower lineal energies to better map the South Atlantic Anomaly (SAA) protons. The instrument was turned on 6 June 1991, and operated for 7470 min (124.5 h). The flight duration was characterized by a very large number of X-ray solar flares and enhanced magnetic field fluctuations; however, no significant dose from the solar particles was measured at the location of this instrument. The flight data can be separated into trapped and galactic cosmic radiation parts. The dose rate, dose-equivalent rate and quality factor for trapped radiation were 4.21 +/- 0.03 mrad day-1, 7.72 +/- 0.05 mrem day-1, and 1.83 +/- 0.1, respectively. The dose rate, dose-equivalent rate, and quality factor for galactic cosmic radiation were 5.34 +/- 0.03 mrad day-1, 14.63 +/- 0.06 mrem day-1, and 2.74 +/- 0.1, respectively. The overall quality factor for the flight was 2.38. The dose from the GCR is higher than from SAA protons because of the high inclination and low altitude of this flight. The AP8MAX model of the trapped radiation gives a dose rate of 2.43 mrad day-1 and a quality factor of 1.77. The CREME solar maximum model of galactic cosmic radiation gives a dose rate of 2.54 mrad day-1 and a quality factor of 2.91. Thus the AP8MAX model underestimates the dose by a factor of 1.8 whereas the CREME model leads to an underestimation of the dose by a factor of 2. A comparison of the LET spectra using the AP8MAX model and galactic cosmic radiation transport codes shows only a qualitative agreement.

NASA Discipline Number 00-00↗

NASA NTRS2011

Constraining the Properties of the Eta Carinae System via 3-D SPH Models of Space-Based Observations: The Absolute Orientation of the Binary Orbit

The extremely massive (> 90 Stellar Mass) and luminous (= 5 x 10(exp 6) Stellar Luminosity) star Eta Carinae, with its spectacular bipolar "Homunculus" nebula, comprises one of the most remarkable and intensely observed stellar systems in the Galaxy. However, many of its underlying physical parameters remain unknown. Multiwavelength variations observed to occur every 5.54 years are interpreted as being due to the collision of a massive wind from the primary star with the fast, less dense wind of a hot companion star in a highly elliptical (e approx. 0.9) orbit. Using three-dimensional (3-D) Smoothed Particle Hydrodynamics (SPH) simulations of the binary wind-wind collision, together with radiative transfer codes, we compute synthetic spectral images of [Fe III] emission line structures and compare them to existing Hubble Space Telescope/Space Telescope Imaging Spectrograph (HST/STIS) observations. We are thus able, for the first time, to tightly constrain the absolute orientation of the binary orbit on the sky. An orbit with an inclination of approx. 40deg, an argument of periapsis omega approx. 255deg, and a projected orbital axis with a position angle of approx. 312deg east of north provides the best fit to the observations, implying that the orbital axis is closely aligned in 3-D space with the Homunculus symmetry axis, and that the companion star orbits clockwise on the sky relative to the primary.

Madura, Thomas I.↗

NASA NTRS2017

Assessment of Terra MODIS On-Orbit Polarization Sensitivity Using Pseudoinvariant Desert Sites

The Moderate Resolution Imaging Spectroradiometer (MODIS) is currently flying on NASA's Earth Observing System Terra and Aqua satellites, launched in 1999 and 2002, respectively. MODIS reflective solar bands in the visible wavelength range are known to be sensitive to polarized light based on prelaunch polarization sensitivity tests. After about five years of on-orbit operations, it was discovered that the polarization sensitivity at short wavelengths had shown a noticeable increase. In this paper, we examine the impact of polarization on measured top-of-atmosphere (TOA) reflectance based on MODIS Collection-6 L1B over pseudo invariant desert sites. The standard polarization correction equation is used in combination with simulated at-sensor radiances using the second simulation of a satellite signal in the Solar Spectrum, Vector Radiative Transfer Code (6SV). We ignore the polarization contribution from the surface and a ratio approach is used for both 6SV-derived in put parameters and observed TOA reflectance. Results indicate that significant gain corrections up to 25% are required near the end of scan for the 412 and 443 nm bands. The polarization correction reduces the seasonal fluctuations in reflectance trends and mirror side ratios from 30% and 12% to 10% and 5%, respectively, for the two bands. Comparison of the effectiveness of the polarization correction with the results from the NASA Ocean Biology Processing Group shows a good agreement in the corrected reflectance trending results and their seasonal fluctuations.

Wu, Aisheng↗

NASA NTRS2019

The New NASA Ames Infrared Optical Constant Facility. Determinations for Titan Aerosol-, and Exoplanet and Brown Dwarf Cloud Particle Analogs

Here we present a new optical constant facility developed at NASA Ames that will allow the determination of optical constants in the infrared of various materials, analogs of hazes and cloud particles in (exo)planet atmospheres and brown dwarfs. Our facility is composed of a Fourier Transform Infrared (FTIR) spectrometer continuously covering the Near-IR, mid-IR and Far-IR range (from 0.74 to 200 µm), coupled to variable angle transmittance and reflectance accessories that allow the characterization of the scattering properties of nonhomogeneous samples (laboratory planetary aerosol analogs, films, slabs of material, crystals, powders...) over a wide incidence and emittance angle range (0-90 degrees). This permits the angular light distribution in both transmission and reflection measurements to be characterized, enabling the determination of the complex indices of refraction, n and k, over the full NIR-FIR range via modeling of the laboratory observations. The resulting refractive indices are critical input parameters in radiative transfer models, exoplanet and brown dwarf cloud models, protoplanetary disk simulations and other models used for the interpretation of observational data from past, current and future (exo)planetary NASA missions. We will present preliminary data obtained on Titan aerosol analogs produced in the Titan Haze Simulation (THS) experiment on COSmIC, a unique experimental platform developed at NASA Ames that allows the simulation of Titan's complex atmospheric chemistry at Titan-like temperature (200 K). We will also introduce a new study of the optical properties of ammonium-bearing phosphates, potential cloud particles forming in temperate exoplanets and brown dwarfs.

Planetary Science↗

NASA NTRSDate not supplied

On the New Optical Constants Database (OCdb) and its Importance for the Interpretation of Observational Data

The Optical Constants database(ocdb.smce.nasa.gov) came online in February 2023 and provides complex refractive indices of laboratory-generated organic refractory materials and ices relevant to (exo) planetary and astrophysical environments.The goal of the OCdb is to centralize published optical constants data to facilitate both their access by the scientific community and their use to analyze observational data returned by space missions and ground-based observatories. Computational tools are also under development to facilitate scientific use of the available OCdb optical constants data sets. Investigators generating laboratory optical constants are therefore encouraged to contribute their data to OCdb in order to increase the availability of their data and to enhance the scientific effectiveness of the database. Optical constants are critical input parameters in models (e.g.,radiative transfer, atmospheric, and reflectance spectral models)that are used to simulate the absorption, reflection, and scattering of light due to solid materials present in planetary and astrophysical environments (planets, their satellites, exoplanets, asteroids, comets, protoplanetary disks, etc.), and are key to the compositional interpretation of observations. We will first present the infrastructure of the OCdb and show how to use and contribute to it. We will introduce the two large NASA projects, namely, the Laboratory Astrophysics Directed Work Package and the NASA Center for Optical Constants, that have been instrumental in (i) developing the OCdb, (ii) generating planetary-and astrophysics-relevant ices and organic refractory materials from gas and ice irradiation in the laboratory, and (iii) determining their optical constants for inclusion in OCdb. We will also present two studies that are making use of these optical constants to interpret observations of Titan’s atmosphere and Pluto’s surface. These studies show the importance of measuring optical constants of laboratory-generated materials, and their impact on the models used to analyze and interpret astronomical observations. These studies also demonstrate the essential importance of such a database and the need for optical constants of a broad range of materials and wavelengths to enable the scientific community and to maximize the scientific return from space missions (e.g., Cassini, New Horizons, SOFIA, JWST).

The Optical Constants database↗

NASA NTRS2023

Highly Resolved Mapping of NO 2 Vertical Column Densities From GeoTASO Measurements Over a Megacity and Industrial Area During the KORUS-AQ Campaign

The Korea–United States Air Quality (KORUS-AQ) campaign is a joint study between the United States National Aeronautics and Space Administration (NASA) and the South Korea National Institute of Environmental Research (NIER) to monitor megacity and transboundary air pollution around the Korean Peninsula using airborne and ground-based measurements. Here, tropospheric nitrogen dioxide (NO 2 ) slant column density (SCD) measurements were retrieved from Geostationary Trace and Aerosol Sensor Optimization (GeoTASO) L1B data during the KORUS-AQ campaign (2 May to 10 June 2016). The retrieved SCDs were converted to tropospheric vertical column densities using the air mass factor (AMF) obtained from a radiative transfer calculation with trace gas profiles and aerosol property inputs simulated with the Community Multiscale Air Quality (CMAQ) model and surface reflectance data obtained from the Moderate Resolution Imaging Spectroradiometer (MODIS). For the first time, we examine highly resolved (250 m × 250 m resolution) tropospheric NO 2 over the Seoul and Busan metropolitan regions and the industrial region of Anmyeon. We reveal that the maximum NO 2 vertical column densities (VCDs) were 4.94×10 16 and 1.46×10 17 molec. cm −2 at 09:00 and 15:00 LT over Seoul, respectively, 6.86×10 16 and 4.89×10 16 molec. cm −2 in the morning and afternoon over Busan, respectively, and 1.64×10 16 molec. cm −2 over Anmyeon. The VCDs retrieved from the GeoTASO airborne instrument were correlated with those obtained from the Ozone Monitoring Instrument (OMI) (r=0.48), NASA's Pandora Spectrometer System (r=0.91), and NO 2 mixing ratios obtained from in situ measurements (r=0.07 in the morning, r=0.26 in the afternoon over the Seoul, and r>0.56 over Busan). Based on our results, GeoTASO is useful for identifying NO 2 hotspots and their spatial distribution in highly populated cities and industrial areas.

Gyo-Hwang Choo↗

NASA NTRS2024

Noise Reduction for Solar-Induced Fluorescence Retrievals Using Machine Learning and Principal Component Analysis: Simulations and Applications to GOME-2 Satellite Retrievals

We use a spectral-based approach that employs principal component analysis along with a relatively shallow artificial neural network (NN) to substantially reduce noise and other artifacts in terrestrial chlorophyll solar-induced fluorescence (SIF) retrievals. SIF is a very small emission at red and far-red wavelengths that is difficult to measure and is highly sensitive to random errors and systematic artifacts. Our approach relies upon an assumption that a trained NN can effectively reconstruct the total SIF signal from a relatively small number of leading principal components of the satellite-observed far-red radiance spectra without using information from the trailing modes that contain most of the random errors. We test the approach with simulated reflectance spectra produced with a full atmospheric and surface radiative transfer model using different observing and geophysical parameters and various noise levels. Resulting noisy and noise-reduced retrieved SIF values are compared with true values to assess performance. We then apply our noise reduction approach to SIF derived from two different satellite spectrometers. For evaluation, since the truth in this case is unknown, we compare SIF retrievals from two independent sensors with each other. We also compare the noise-reduced SIF temporal variations with those from an independent gross primary product (GPP) product that should display similar variations. Results show that our noise reduction approach improves capture of SIF seasonal and inter-annual variability. Our approach should be applicable to many noisy data products derived from spectral measurements. Our methodology does not replace the original retrieval algorithms; rather the original noisy retrievals are needed as the target for the NN training process.

noise reduction, solar-induced fluorescence, SIF, ↗