Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “REFLECTOR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Toric offset three-reflector antenna for the advanced microwave limb sounder

An advanced Microwave Limb Sounder (MLS), now in concept development for a potential future mission, is a space-borne heterodyne instrument to measure pressure, temperature, and atmospheric constituents from thermal emission between 120 and 2400 GHz. Previous MLS instruments used pencil-beam antennas sized to resolve N 1 vertical scale height. Current atmospheric models need better horizontal resolution than orbit spacing provides. To meet these needs, a new antenna concept combines the wide scan range of the parabolic torus with unblocked offset Cassegrain optics. The resulting system is diffraction-limited in the vertical plane but extremely astigmatic, with beamwidths 0.13~2.5. Nadir axis symmetry ensures that this Beam AspectRatio (BAR) is invariant over f33' of azimuth. The antenna can feed either an array of receivers or multiplexed low-noise receivers whose FOVs are swept by a small scanning mirror. We describe 3 stages of antenna design: First, using a paraxial-optics method, we choose conic profiles given vertical resolution orbit geometry, then develop the surfaces by nadir axis rotation, matching axisymmetric feeds to the BAR. A ray-trace program validates the design and generates alignment and deformation tolerances. Finally, a physical optics analysis verifies reflector surface currents and radiation patterns.

microwave↗

On-Orbit Thermal Performance of a Submillimeter Telescope Primary Reflector Panel

A detailed thermal analysis has been performed for a panel of a segmented primary mirror which is closest to the high side of the telescope sunshade. This panel was selected because the spatial temperature distribution was expected to be the worst. The JPL90-10 primary reflector panel configuration was investigated because of its superior figure error performance in ground-based testing.

SMILS↗

ECAR-6589 Rev 0 Reflector Support Structure Analysis

The purpose of this ECAR is to document compliance with best engineering practices, ANSI/AISC N690 and the seismic requirements of IBC-2015 for the Reflector Support Structure of the MARVEL microreactor.

21 - SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLAN↗

New Method to Characterize Degradation of First Surface Aluminum Reflectors: Preprint

This paper reports the development of a new optical instrument capable of characterizing the aging process of enhanced first surface aluminum reflectors for concentrating solar power (CSP) application. Samples were exposed outdoors at different sites and in accelerated exposure tests. All samples exposed outdoors showed localized corrosion spots. Degradation originated from points of damage inthe protective coating, but propagated underneath the protective coating. The degraded samples were analyzed with a microscope and with a newly designed space-resolved specular reflectometer (SR)2 that is capable of optically detecting and characterizing the corrosion spots. The device measures the specular reflectance at three acceptance angles and the wavelengths with spatial resolution usinga digital camera's CMOS sensor. It can be used to measure the corrosion growth rate during outdoor and accelerated exposure tests. These results will allow a correlation between the degraded mirror surface and its specular reflectance.

14 SOLAR ENERGY↗

Structural, optical and waveguiding properties improvement of SiO{sub 2}/TiO{sub 2} Bragg reflectors processed by the sol–gel method under the effect of Ni-doped TiO{sub 2} and annealing duration

Highlights: • The formation of anatase phase only, whatever are Ni content and annealing duration. • Transmission and PL spectra redshifted with Ni content and annealing duration. • PL lowering with Ni content is due to the recombination rate of electron–hole reduction. • Annealing duration increases the recombination rate and then the PL intensity rises. • Increasing Ni content improves waveguiding properties and then two TE modes appear. - Abstract: We investigated the nickel doped TiO{sub 2} layer and annealing duration effects on SiO{sub 2}/TiO{sub 2} Bragg reflectors. The films crystallize in pure anatase phase whatever is the Ni content and the annealing duration. In UV–vis-NIR analyses, variations of width, position and transmission coefficient of the stop-band were observed. The PL spectra red-shifted when the Ni content and annealing duration increased. As the annealing duration increases, an additional sharp emission peak appears around 867 nm, indicating a reduced number of defects. As Ni content increased, the M-lines spectroscopy shows two transverse electric polarization guided modes TE{sub 0} and TE{sub 1}, which indicates a decreased refractive index and an increased film thickness.

36 MATERIALS SCIENCE↗

Physics design of the next-generation spallation neutron target-moderator-reflector-shield assembly at LANSCE

Here, we discuss the physics design of the next-generation spallation neutron target-moderator-reflector-shield (TMRS) assembly for the Manuel Lujan Jr. Neutron Scattering Center (Lujan Center) at the Los Alamos Neutron Science Center (LANSCE). We developed this TMRS to improve the neutronic performance of the Lujan Center in the intermediate energy range (keV–MeV) enabling a variety of new nuclear physics experiments, as well as increasing the quality of the ongoing experiments. The results of our Monte Carlo optimization study indicate that the new TMRS will generate keV–MeV neutrons with higher intensity and improved time resolution. At the same time, the new design largely maintains its current performance in the cold and thermal ranges supporting materials research. In this article we show that the new TMRS has the potential to enhance the Lujan Center’s experimental capability in a wider interval of energies – cold to intermediate – after its scheduled installation in 2020.

43 PARTICLE ACCELERATORS↗

Ultralight Angstrom-Scale Optimal Optical Reflectors

High reflectance in many state-of-the-art optical devices is achieved with noble metals. However, metals are limited by losses and, for certain applications, by their high mass density. Using a combination of ab initio and optical transfer matrix calculations, we evaluate here the behavior of graphene-based angstrom-scale metamaterials and find that they could act as nearly perfect reflectors in the mid–long-wave infrared (IR) range. The low density of states for electron–phonon scattering and interband excitations leads to unprecedented optical properties for graphene heterostructures, especially alternating atomic layers of graphene and hexagonal boron nitride, at wavelengths greater than 10 μm. At these wavelengths, these materials exhibit reflectivities exceeding 99.7% at a fraction of the weight of noble metals, as well as plasmonic mode confinement and quality factors that are greater by an order of magnitude compared to noble metals. These findings hold promise for ultracompact optical components and waveguides for mid-IR applications. Moreover, unlike metals, the photonic properties of these heterostructures could be actively tuned via chemical and/or electrostatic doping, providing exciting possibilities for tunable devices.

2D heterotructures↗

InAlN/GaN Bragg reflectors grown by plasma-assisted molecular beam epitaxy

We report on molecular beam epitaxy growth and characterization of ten-period lattice-matched InAlN/GaN distributed Bragg reflectors (DBRs), with peak reflectivity centered around 400 nm. Thanks to the well tuned ternary alloy composition, crack-free surfaces have been obtained, as confirmed by both optical and transmission electron microscopy (TEM). Their good periodicity and well-defined interfaces have been confirmed by both x-ray diffraction and TEM measurements. Peak reflectivity values as high as 60% with stop bands of 30 nm have been demonstrated. Optical measurements revealed that discrepancy between the obtained (60%) and the theoretically expected ({approx}75%) reflectivity is a consequence of significant residual absorption ({approx}35%). TEM measurements revealed the coexistence of zinc-blende and wurtzite phases, as well as planar defects, mainly in GaN. These defects are suggested as the potential source of the undesired absorption and/or scattering effects that lowered the DBRs' peak reflectivity.

36 MATERIALS SCIENCE↗

Composition pulling effect and strain relief mechanism in AlGaN/AlN distributed Bragg reflectors

We report on the composition pulling effect and strain relief mechanism in AlGaN/AlN distributed Bragg reflectors (DBRs) grown on GaN template/{alpha}-Al{sub 2}O{sub 3}(0001) by metal organic chemical vapor deposition. The reciprocal space mapping contours reveal that these DBRs are coherently grown. Cross-section transmission electron microscopy image of the AlGaN/AlN DBRs and the energy-dispersive x-ray analysis indicate that an AlGaN layer with gradient Al composition is located between the Al{sub 0.4}Ga{sub 0.6}N and AlN layers along the [0001] direction. It is attributed to the fact that Ga atoms in AlGaN are pulled and segregated to the upper layer by the strain. The density of strain energy is estimated to reduce more than one order by forming this quasi-three-sublayer structure comparing to the designed bi-sublayer structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Photonic crystal membrane reflectors by magnetic field-guided metal-assisted chemical etching

Metal-assisted chemical etching (MacEtch) is a simple etching method that uses metal as the catalyst for anisotropic etching of semiconductors. However, producing nano-structures using MacEtch from discrete metal patterns, in contrast to interconnected ones, has been challenging because of the difficulties in keeping the discrete metal features in close contact with the semiconductor. We report the use of magnetic field-guided MacEtch (h-MacEtch) to fabricate periodic nanohole arrays in silicon-on-insulator (SOI) wafers for high reflectance photonic crystal membrane reflectors. This study demonstrates that h-MacEtch can be used in place of conventional dry etching to produce ordered nanohole arrays for photonic devices.

36 MATERIALS SCIENCE↗

Fabrication and optical properties of non-polar III-nitride air-gap distributed Bragg reflector microcavities

Using the thermal decomposition technique, non-polar III-nitride air-gap distributed Bragg reflector (DBR) microcavities (MCs) with a single quantum well have been fabricated. Atomic force microscopy reveals a locally smooth DBR surface, and room-temperature micro-photoluminescence measurements show cavity modes. There are two modes per cavity due to optical birefringence in the non-polar MCs, and a systematic cavity mode shift with cavity thickness was also observed. Although the structures consist of only 3 periods (top) and 4 periods (bottom), a quality factor of 1600 (very close to the theoretical value of 2100) reveals the high quality of the air-gap DBR MCs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High power and high temperature continuous-wave operation of distributed Bragg reflector quantum cascade lasers

High temperature continuous-wave (CW) operation of a distributed Bragg reflector (DBR) quantum cascade laser is demonstrated up to a heat sink temperature of 80 °C. A CW output power of 2 W and a single mode operation with side mode suppression ratio of 30 dB around wavelength of 4.48 μm were achieved at 20 °C. The maximum pulsed and CW wall-plug-efficiencies reached 14.7% and 10.3% at 20 °C, respectively. A large tuning range of 5 cm{sup −1} between mode hopping was observed and attributed to the thermal cross-talk from the gain section to the DBR section.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Polarity dependence of the electrical characteristics of Ag reflectors for high-power GaN-based light emitting diodes

We report on the polarity dependence of the electrical properties of Ag reflectors for high-power GaN-based light-emitting diodes. The (0001) c-plane samples become ohmic after annealing in air. However, the (11–22) semi-polar samples are non-ohmic after annealing, although the 300 °C-annealed sample shows the lowest contact resistivity. The X-ray photoemission spectroscopy (XPS) results show that the Ga 2p core level for the c-plane samples experiences larger shift toward the valence band than that for the semi-polar samples. The XPS depth profile results show that unlike the c-plane samples, the semi-polar samples contain some amounts of oxygen at the Ag/GaN interface regions. The outdiffusion of Ga atoms is far more significant in the c-plane samples than in the semi-polar samples, whereas the outdiffusion of N atoms is relatively less significant in the c-plane samples. On the basis of the electrical and XPS results, the polarity dependence of the electrical properties is described and discussed.

36 MATERIALS SCIENCE↗

Cherenkov radiation oscillator without reflectors

This Letter presents a Cherenkov radiation oscillator with an electron beam travelling over a finitely thick plate made of negative-index materials. In such a scheme, the external reflectors required in the traditional Cherenkov oscillators are not necessary, since the electromagnetic energy flows backward in the negative-index materials, leading to inherent feedback. We theoretically analyzed the interaction between the electron beam and the electromagnetic wave, and worked out the growth rate and start current through numerical calculations. With the help of particle-in-cell simulation, the theoretical predictions are well demonstrated.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Enhanced absorption of monolayer MoS{sub 2} with resonant back reflector

The optical absorption of monolayer MoS{sub 2} on top of one-dimensional photonic crystal (1DPC) or metal films with spacer layers is theoretically investigated by extracting the permittivity of monolayer MoS{sub 2} from existing experimental results [K. F. Mak et al., Phys. Rev. Lett. 105, 136805 (2010)]. The absorption of graphene with 1DPC across a broad spectral range is substantially enhanced because of the photonic localization at the optical micro-cavity on top of the 1DPC or metal films. The absorption of monolayer MoS{sub 2} can be tuned by varying either the distance between the monolayer MoS{sub 2} and the back reflector or the thickness of the cover layers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Measuring preheat in laser-drive aluminum using velocity interferometer system for any reflector: Experiment

In this paper, we systematically study preheating in laser-direct-drive shocks by using a velocity interferometer system for any reflector (VISAR). Using the VISAR, we measured free surface velocity histories of Al samples over time, 10–70 μm thick, driven directly by a laser at different frequencies (2ω, 3ω). Analyzing our experimental results, we concluded that the dominant preheating source was X-ray radiation. We also discussed how preheating affected the material initial density and the measurement of Hugoniot data for high-Z materials (such as Au) using impedance matching. To reduce preheating, we proposed and tested three kinds of targets.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

An efficient light trapping scheme based on textured conductive photonic crystal back reflector for performance improvement of amorphous silicon solar cells

An efficient light trapping scheme named as textured conductive photonic crystal (TCPC) has been proposed and then applied as a back-reflector (BR) in n-i-p hydrogenated amorphous silicon (a-Si:H) solar cell. This TCPC BR combined a flat one-dimensional photonic crystal and a randomly textured surface of chemically etched ZnO:Al. Total efficiency enhancement was obtained thanks to the sufficient conductivity, high reflectivity and strong light scattering of the TCPC BR. Unwanted intrinsic losses of surface plasmon modes are avoided. An initial efficiency of 9.66% for a-Si:H solar cell was obtained with short-circuit current density of 14.74 mA/cm{sup 2}, fill factor of 70.3%, and open-circuit voltage of 0.932 V.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗