Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “REACTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Vacuum Pyrolysis of Hybrid Poplar Milled Wood Lignin with Fourier Transform-Ion Cyclotron Resonance Mass Spectrometry Analysis of Feedstock and Products for the Elucidation of Reaction Mechanisms

The pyrolysis of lignocellulosic materials is a promising technique to produce fuels and chemicals. It is well known that the most abundant products of lignin pyrolysis are oligomeric molecules, known as pyrolytic lignin (PL). The chemical composition of PL has been extensively studied; however, there is still an important debate whether these oligomers are produced directly from the lignin or from the recombination of monomeric pyrolytic products. Existing theories are unable to describe the effect of vacuum on the distribution of pyrolysis products. Hybrid poplar milled wood lignin (MWL) was initially isolated and thoroughly characterized by Fourier transform-ion cyclotron resonance mass spectrometry (FT-ICR MS). Chemical formulas were assigned to each oligomeric compound detected. The MWL was also subjected to vacuum pyrolysis in a modified pyroprobe at 250, 750, and 1000 mbar (absolute pressure), and the resulting liquid products were analyzed by FT-ICR MS. A new strategy to assign structural representations to the oligomeric PL products is proposed, based on the plausible pyrolysis reaction mechanisms of depolymerization/fragmentation applied to original MWL oligomer formulas. Our results support the hypothesis that PL is formed from the removal of moieties from primary lignin pyrolysis products with between three and five aromatic rings. This depolymerization/fragmentation allows the oligomers to reduce their molecular weights to the point where they can be removed from the reaction zone by direct vaporization. Furthermore, this phenomenon highlights the importance of pressure on removal mechanisms and their impact on the molecular weight of the resulting products from lignin pyrolysis.

09 BIOMASS FUELS↗

Ultrafast Shock-Induced Reactions in Pentaerythritol Tetranitrate Thin Films

The chemical and physical processes involved in the shock-to-detonation transition of energetic solids are not fully understood due to difficulties in probing the fast dynamics involved in initiation. Here, we employ shock interferometry experiments with sub-20-ps time resolution to study highly textured (110) pentaerythritol tetranitrate (PETN) thin films during the early stages of shock compression using ultrafast laser-driven shock wave methods. We observe evidence of rapid exothermic chemical reactions in the PETN thin films for interface particle velocities above ~1.05 km/s as indicated by shock velocities and pressures well above the unreacted Hugoniot. The time scale of our experiment suggests that exothermic reactions begin less than 50 ps behind the shock front for these high-density PETN thin films. Thermochemical calculations for partially reacted Hugoniots also support this interpretation. Finally, the experimentally observed time scale of reactivity could be used to narrow possible initiation mechanisms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Manipulating the Energetics and Rates of Electron Transfer in Rhodobacter capsulatus Reaction Centers with Asymmetric Pigment Content

Seemingly redundant parallel pathways for electron transfer (ET) – comprised of identical sets of cofactors – are a cornerstone feature of photosynthetic reaction centers (RCs) involved in light-energy conversion. In native bacterial RCs, both the A and B branches house one bacteriochlorophyll (BChl) and one bacteriopheophytin (BPh), but the A branch is used exclusively. Described herein are results obtained for two Rhodobacter capsulatus RCs with an unnaturally high degree of cofactor asymmetry – two BPh on the RC’s B side and two BChl on the A side. These pigment changes derive, respectively, from the His(M180)Leu mutation [a BPh (Φ B ) replaces the B-side BChl (B B )], and the Leu(M212)His mutation [a BChl (β A ) replaces the A-side BPh (H A )]. Additionally, Tyr(M208)Phe was employed to disfavor ET to the A branch and in one mutant Val(M131)Glu creates a hydrogen bond to H B to enhance ET to H B . In both Φ B mutants, the decay kinetics of the excited primary ET donor (P*) resolve three populations with lifetimes of ~9 ps (50-60%), ~40 ps (10-20%) and ~200 ps (20-30%), with P + Φ B - formed predominately from the 9-ps fraction. The 50-60% yield of P + Φ B - is the highest yet observed for a Φ B -containing RC. Here, the results provide insight into factors needed for efficient multi-step ET.

14 SOLAR ENERGY↗

Cascade Reaction of Ethanol to Butadiene over Ag-Promoted, Silica- or Zeolite-Supported Ta, Y, Pr, or La Oxide Catalysts

Ethanol converts to 1,3-butadiene in the presence of suitable multifunctional catalysts. In this work, Lewis acid cations Ta, Y, Pr, and La were dispersed on amorphous silica or beta zeolite, and after physically mixing with silica-supported Ag nanoparticles, were tested in the cascade reaction of ethanol to butadiene at 573 K. The Lewis acid catalysts were characterized by X-ray fluorescence, N 2 physisorption, scanning transmission electron microscopy (STEM), X-ray diffraction, diffuse reflectance (DR) UV-Vis and X-ray photoelectron spectroscopy. High-resolution STEM images confirmed the small oxide cluster size on the silica support. Results from DR UV-Vis spectroscopy showed zeolite-supported Ta and Pr catalysts had a smaller metal oxide cluster size, relative to their SiO 2 counterparts. X-ray photoelectron spectroscopy confirmed the oxidation state of the cations supported on the zeolite remained the same as that of their SiO 2 -supported analogues. The selectivity of the C 4 coupling products toward butadiene relative to butanol correlated with acid strength of the Lewis acid cations, as evaluated by the 2-propanol decomposition reaction to propene and acetone, with Ta being the most selective. In conclusion, the rate of C-C coupling over the zeolite-supported cations was enhanced by an order of magnitude compared to those cations supported on amorphous SiO 2 .

C-C bond formation↗

Reorientation of the Methyl Group in MAs(III) is the Rate-Limiting Step in the ArsM As(III) S -Adenosylmethionine Methyltransferase Reaction

The most common biotransformation of trivalent inorganic arsenic (As(III)) is methylation to mono-, di-, and trimethylated species. Methylation is catalyzed by As(III) S-adenosylmethionine (SAM) methyltransferase (termed ArsM in microbes and AS3MT in animals). Methylarsenite (MAs(III)) is both the product of the first methylation step and the substrate of the second methylation step. When the rate of the overall methylation reaction was determined with As(III) as the substrate, the first methylation step was rapid, whereas the second methylation step was slow. In contrast, when MAs(III) was used as the substrate, the rate of methylation was as fast as the first methylation step when As(III) was used as the substrate. These results indicate that there is a slow conformational change between the first and second methylation steps. The structure of CmArsM from the thermophilic alga Cyanidioschyzon merolae sp. 5508 was determined with bound MAs(III) at 2.27 Å resolution. The methyl group is facing the solvent, as would be expected when MAs(III) is bound as the substrate rather than facing the SAM-binding site, as would be expected for MAs(III) as a product. We propose that the rate-limiting step in arsenic methylation is slow reorientation of the methyl group from the SAM-binding site to the solvent, which is linked to the conformation of the side chain of a conserved residue Tyr70.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

1,2-Propanediol as a Surrogate Molecule of Glycerol for Mechanistic Studies of Selective Hydrodeoxygenation Reactions over Mo 2 C and Cu/Mo 2 C Surfaces

The upgrading of glycerol, a byproduct from biodiesel production, is important for developing more sustainable biomass conversion technologies. Nonetheless, the low vapor pressure and structural complexity of glycerol limit mechanistic studies of gas-phase reactions on model surfaces and powder catalysts. In this work, we demonstrate the feasibility of using 1,2-propanediol (PDO) as a surrogate compound for the mechanistic study of glycerol over Mo 2 C and Cu/Mo 2 C surfaces. Here, the results show that glycerol and 1,2-PDO undergo similar reaction pathways on both the Mo and Cu sites, suggesting that 1,2-PDO could be used as a higher vapor pressure surrogate to glycerol for gas-phase mechanistic studies.

1,2-Propanediol↗

Pentavalent Uranium Oxide via Reduction of [UO2]2+ Under Hydrothermal Reaction Conditions

The synthesis, crystal structure and spectroscopic characterization of [UV(H2O)2(UVIO2)2O4(OH)](H2O)4 (1), a mixed-valent UV/UVI oxide material, are reported. The hydrothermal reaction of UO22+ with Zn and hydrazine at 120 °C for three days yields 1 in the form of a dark red crystalline solid. Compound 1 has been characterized by a combination of single-crystal and powder X-ray diffraction (XRD), elemental analysis, thermogravimetric analysis, X-ray photoelectron spectroscopy (XPS) and X-ray absorption spectroscopy (XAS). The structure consists of an extended sheet of edge and point shared UVI pentagonal bipyramids that are further connected by edge sharing to square bipyramidal UV units. The overall topology is similar to the mineral ianthinite. The uranium L|||-edge XAS revealed features consistent with those observed by single-crystal X-ray diffraction. High resolution XPS data analysis of the U4f region confirmed the oxidation states of U as originally assigned from XRD analysis and bond valence summations.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Atomically Dispersed Au-(OH) x Species Bound on Titania Catalyze the Low-Temperature Water-Gas Shift Reaction

We report a new method for stabilizing appreciable loadings (~1 wt %) of isolated gold atoms on titania and show that these catalyze the low-temperature water-gas shift reaction. The method combines a typical gold deposition/precipitation method with UV irradiation of the titania support suspended in ethanol. Dissociation of H 2 O on the thus-created Au–O–TiO x sites is facile. At higher gold loadings, nanoparticles are formed, but they were shown to add no further activity to the atomically bound gold on titania. Removal of this “excess” gold by sodium cyanide leaching leaves the activity intact and the atomically dispersed gold still bound on titania. The new materials may catalyze a number of other reactions that require oxidized active metal sites.

Yang, Ming↗

Unique Activity of Platinum Adislands in the CO Electrooxidation Reaction

The research described in this product was performed in part in the Environmental Molecular Sciences Laboratory, a national scientific user facility sponsored by the Department of Energy's Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory. The development of electrocatalytic materials of enhanced activity and efficiency through careful manipulation, at the atomic scale, of the catalyst surface structure has long been a goal of electrochemists. To accomplish this ambitious objective, it would be necessary both to obtain a thorough understanding of the relationship between the atomic-level surface structure and the catalytic properties and to develop techniques to synthesize and stabilize desired active sites. In this contribution, we present a combined experimental and theoretical study in which we demonstrate how this approach can be used to develop novel, platinum-based electrocatalysts for the CO electrooxidation reaction in CO(g)-saturated solution; the catalysts show activities superior to any pure-metal catalysts previously known. We use a broad spectrum of electrochemical surface science techniques to synthesize and rigorously characterize the catalysts, which are composed of adisland-covered platinum surfaces, and we show that highly undercoordinated atoms on the adislands themselves are responsible for the remarkable activity of these materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Sub-4 nm PtZn Intermetallic Nanoparticles for Enhanced Mass and Specific Activities in Catalytic Electrooxidation Reaction

Atomically ordered intermetallic nanoparticles (iNPs) have sparked considerable interest in fuel cell applications by virtue of their exceptional electronic and structural properties. However, the synthesis of small iNPs in a controllable manner remains a formidable challenge because of the high temperature generally required in the formation of intermetallic phases. Here we report a general method for the synthesis of PtZn. iNPs (3.2 +/- 0.4 nm) on multiwalled carbon nanotubes (MWNT) via a facile and capping agent free strategy using a sacrificial mesoporous silica (mSiO(2)) shell. The as-prepared PtZn iNPs exhibited ca. 10 times higher mass activity in both acidic and basic solution toward the methanol oxidation reaction (MOR) compared to larger PtZn iNPs synthesized on MWNT without the mSiO2 shell. Density functional theory (DFT) calculations predict that PtZn systems go through a "non-CO" pathway for MOR because of the stabilization of the OH* intermediate by Zn atoms, while a pure Pt system forms highly stable COH* and CO* intermediates, leading to catalyst deactivation. Experimental studies on the origin of the backward oxidation peak of MOR coincide well with DFT predictions. Moreover, the calculations demonstrate that MOR on smaller PtZn iNPs is energetically more favorable than larger iNPs, due to their high density of corner sites and lower-lying energetic pathway. Therefore, smaller PtZn iNPs not only increase the number but also enhance the activity of the active sites in MOR compared with larger ones. This work opens a new avenue for the synthesis of small iNPs with more undercoordinated and enhanced active sites for fuel cell applications.

Qi, Zhiyuan↗

In-situ synchrotron x-ray spectroscopy of ruthenium nanoparticles modified with selenium for oxygen reduction reaction.

We used in situ Se K-edge X-ray spectroscopy to characterize Ru nanoparticles chemically modified with submonolayers of selenium (Se/Ru) [Cao et al. J. Electrochem. Soc. 2006, 153, A869]. X-ray powder diffraction verified that the Se/Ru catalyst had metallic Ru cores. The in situ X-ray absorption near edge structure taken at the open circuit potential showed that there were both elemental and oxidized selenium on the as-prepared Se/Ru samples. All selenium oxide was reduced to the elemental form of selenium by applying negative potentials. By applying positive potentials, selenium was subsequently reoxidized. The analysis of the extended X-ray absorption fine structure shows the appearance of selenium hydration (Se-OH{sub 2}) in a deaerated solution, which was not observed during the oxygen reduction reaction. We present evidence that Se-free Ru atoms play an important role in the ORR activity of the Se/Ru catalyst studied in this paper.

43 PARTICLE ACCELERATORS↗