Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Pressure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Diamond anvil cell measurement of high-pressure yield strength of vanadium using in situ thickness determination

The pressure dependence of the quasistatic yield strength of vanadium in polycrystalline foils and powders has been measured up to 90 GPa at room temperature using an implementation of a nonhydrostatic diamond-anvil cell technique, an extension of the technique of Meade and Jeanloz [C. Meade and R. Jeanloz, J. Geophys. Res. 93, 3261 (1988)]. A feature present in this work is the use of an in situ determination of the sample thickness and pressure profile using synchrotron x-ray techniques, allowing a determination of the strength at each point across the sample. Following an initial increase in the strength with pressure, a decrease in the strength of vanadium was observed starting at {approx}40-50 GPa. The softening of the yield strength of vanadium at high pressure is quite surprising and unusual, following the trend of an unusual softening of the shear modulus associated with a subtle phase transition from body-centered-cubic-to-rhombohedral structure in a recent x-ray diffraction experiment.

36 MATERIALS SCIENCE↗

Propagule Pressure in Microbial Introductions

The use of potentially beneficial microorganisms in agriculture (microbial inoculants) has rapidly accelerated in recent years. For microbial inoculants to be effective as agricultural tools, these organisms must be able to survive and persist in novel environments while not destabilizing the resident community or spilling over into adjacent natural ecosystems. Here, we adapt a macroecological propagule pressure model to a microbial scale and present an experimental approach for testing the role of propagule pressure in microbial inoculant introductions. We experimentally determined the risk-release relationship for an IAA-expressing Pseudomonas simiae inoculant in a model monocot system. We then used this relationship to simulate establishment outcomes under a range of application frequencies (propagule number) and inoculant concentrations (propagule size). Our simulations show that repeated inoculant applications may increase establishment, even when increased inoculant concentration does not alter establishment probabilities. The dataset filed here includes the experimemtal datafile, and a RMarkdown file that includes all the code used in in both the modeling and anaylsis.

agriculture↗

Synchrotron infrared reflectivity measurements of iron at high pressures

The infrared reflectance of iron was studied using high-pressure synchrotron radiation methods up to 50 GPa at room temperature in a diamond anvil cell of 1000-8000 cm{sup -1} (1.25-10 {mu}m). The magnitude of the reflectivity shows a weak pressure dependence up to the transition from the body centered cubic ({alpha}) to hexagonal close packed ({epsilon}) phase transition, where a discontinuous change in both the slope and magnitude of the reflectivity was observed. Reflectance spectra were corrected for diamond absorption and treated with a Kramers-Kronig analysis to extract the optical constants; the emissivity of iron was derived from Kirchoff's law. The pressure and wavelength dependence of the emissivity is characterized by an empirical function for 1.5-1.9 {mu}m; this wavelength range is useful for spectroradiometric temperature measurements from 1000 K up to {approx}2500 K. {alpha}-Fe is a nonideal emitter; however, {epsilon}-Fe behaves as an almost perfect greybody in the infrared up to the highest pressures of the measurements. Temperature measurements based on the spectroradiometry of iron samples should take into account the wavelength dependent emissivity below the {alpha}-{epsilon} phase transition at {approx}13 GPa.

36 MATERIALS SCIENCE↗

Electronic environments of ferrous iron in rhyolitic and basaltic glasses at high pressure: Silicate Glasses at High Pressure

The physical properties of silicate melts within Earth's mantle affect the chemical and thermal evolution of its interior. Chemistry and coordination environments affect such properties. We have measured the hyperfine parameters of iron-bearing rhyolitic and basaltic glasses up to ~120 GPa and ~100 GPa, respectively, in a neon pressure medium using time domain synchrotron Mössbauer spectroscopy. The spectra for rhyolitic and basaltic glasses are well explained by three high-spin Fe 2+ -like sites with distinct quadrupole splittings. Absence of detectable ferric iron was confirmed with optical absorption spectroscopy. The sites with relatively high and intermediate quadrupole splittings are likely a result of fivefold and sixfold coordination environments of ferrous iron that transition to higher coordination with increasing pressure. The ferrous site with a relatively low quadrupole splitting and isomer shift at low pressures may be related to a fourfold or a second fivefold ferrous iron site, which transitions to higher coordination in basaltic glass, but likely remains in low coordination in rhyolitic glass. These results indicate that iron experiences changes in its coordination environment with increasing pressure without undergoing a high-spin to low-spin transition. We compare our results to the hyperfine parameters of silicate glasses of different compositions. With the assumption that coordination environments in silicate glasses may serve as a good indicator for those in a melt, this study suggests that ferrous iron in chemically complex silicate melts likely exists in a high-spin state throughout most of Earth's mantle.

58 GEOSCIENCES↗

X-ray Diffraction of Cubic Gd2)3/Er under High Pressure

In this paper, we report the in situ high pressure X-ray diffraction studies on Er{sup 3+} doped Gd{sub 2}O{sub 3} in a diamond anvil cell up to 39.8 GPa at room temperature. Several phase transitions have been identified in our studies. The structural transformation from a starting cubic phase to a hexagonal phase occurred during the sample compression process, at 8.57 GPa. And the hexagonal phase was stable from 12.5 GPa up to the highest pressure in this study but was not quenchable and transformed to a monoclinic phase after pressure release. An anomalous high pressure behavior in the hexagonal type Gd{sub 2}O{sub 3} phase was observed, which might be caused by an electron transition influenced by Er{sup 3+} ions doping. By fitting the compression data to the Birch-Murnaghan equation of state, the bulk moduli of the cubic and two hexagonal (at p < 19.9 GPa and p > 27.0 GPa) Gd{sub 2}O{sub 3} phases were determined to be 164 {+-} 3, 185 {+-} 7, and 150 {+-} 10 GPa with B'{sub 0} = 4, respectively.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Bayesian inference for heterogeneous caprock permeability based on above zone pressure monitoring

The presence of faults/ fractures or highly permeable zones in the primary sealing caprock of a CO2 storage reservoir can result in leakage of CO2. Monitoring of leakage requires the capability to detect and resolve the onset, location, and volume of leakage in a systematic and timely manner. Pressure-based monitoring possesses such capabilities. This study demonstrates a basis for monitoring network design based on the characterization of CO2 leakage scenarios through an assessment of the integrity and permeability of the caprock inferred from above zone pressure measurements. Four representative heterogeneous fractured seal types are characterized to demonstrate seal permeability ranging from highly permeable to impermeable. Based on Bayesian classification theory, the probability of each fractured caprock scenario given above zone pressure measurements with measurement error is inferred. The sensitivity to injection rate and caprock thickness is also evaluated and the probability of proper classification is calculated. The time required to distinguish between above zone pressure outcomes and the associated leakage scenarios is also computed.

54 ENVIRONMENTAL SCIENCES↗

Compressibility and thermoelectric behavior of TiCoSb half-Heusler compound at high pressures

We have performed high-pressure structural, electrical, and thermal property measurements on half-Heusler thermoelectric compound, TiCoSb. High-pressure powder diffraction measurements have been performed in an angle-dispersive geometry using synchrotron x-rays up to 115 GPa using a diamond anvil cell. The results show the cubic crystal structure (F-43m) stable and no pressure induced structural phase transitions were observed over the entire pressure range. The electrical and thermal properties were studied up to 5 GPa using a Paris-Edinburgh press equipped with a specialized sample cell assembly. The compressibility, variation of thermal conductivity, Seebeck co-efficient and thermoelectric figure of merit (ZT) for the material are discussed in detail.

36 MATERIALS SCIENCE↗

Synthesis, structure, magnetic properties and structural distortion under high pressure of a new osmate, Sr{sub 2}CuOsO{sub 6}

A new osmate Sr{sub 2}CuOsO{sub 6} was synthesized and its structure refined using powder synchrotron X-ray diffraction. The results of the Reitveld refinements indicate complete B-cation order in a double perovskite crystal structure. Furthermore, the analysis of the B-cation bond lengths indicates a symmetric coordination around Os, as opposed to a significant distortion of Cu-O bond lengths. The octahedral distortion around Cu(II) is characteristic of a Jahn-Teller distortion. Within the crystal structure of Sr{sub 2}CuOsO{sub 6}, the long Cu-O bonds are aligned in the same direction along the c-axis in the tetragonal unit cell. This parallel arrangement of long Cu-O bonds produces a lattice parameter ratio, c/(2{sup 1/2}a), that is greater than unity. The magnetic susceptibility of Sr{sub 2}CuOsO{sub 6} was measured using a SQUID magnetometer and was observed to be consistent with an assignment of Cu(II)-Os(VI) formal oxidation states, thus confirming the bond valences calculated on the basis of the crystal structure. In perovskites, octahedral tilting and bond shortening are two competing compression mechanisms. Compression mechanisms of this double perovskite were characterized using high-pressure synchrotron X-ray diffraction. Application of hydrostatic pressure up to 6 GPa significantly decreased the lattice parameter ratio, demonstrating the primary compression mechanism is a shortening of the long Cu-O bond. - Graphical abstract: Relative compressibility of the lattice parameters of a new osmate, Sr{sub 2}CuOsO{sub 6}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis of mixed-valent [alpha]- and [beta]-NaFe[subscript 2]O[subscript 3] polymorphs under controlled partial oxygen pressure

Synthesis of mixed valent compounds, especially when multiple polymorphs exist, requires careful control of the preparation conditions. {alpha}- and {beta}-NaFe{sub 2}O{sub 3} polymorphs were synthesized under controlled partial oxygen pressure (pO{sub 2}). pO{sub 2} regions of stability at 850 C were determined for both phases for the first time. A modified oxygen buffer method was developed for the facile preparation of mixed valent oxides under controlled pO{sub 2}. {beta}-NaFe{sub 2}O{sub 3} is the only known n = 2 member of the AM{sub n}O{sub n+1} (A = alkali metal, M = 3d metal) rock-salt related homolog series with layered cation ordering. The possibility of new members of the homolog series with other 3d metals is considered.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High-Pressure Studies on CeO2 Nano-Octahedrons with a (111)-Terminated Surface

In-situ high-pressure X-ray diffraction and Raman spectroscopies have been performed on well-shaped CeO{sub 2} nano-octahedrons enclosed by eight (111) planes. The CeO{sub 2} nano-octahedrons are shown to be more stable than their bulk counterparts and some other reported CeO{sub 2} nanocrystals of smaller size. The transition pressure from cubic to orthorhombic phase is approximately 10 GPa higher than that of 12 nm CeO{sub 2} nanocrystals even though they have similar volume expansion at ambient conditions. Additionally, the phase transition to {alpha}-PbCl2 phase is very sluggish and uncompleted even up to 55 GPa. The TEM image of the sample after decompression from 55 GPa clearly shows that the nano-octahedrons preserve the starting shape. Such distinct high-pressure behaviors in CeO{sub 2} nano-octahedrons have been discussed in terms of their special exposure surface. Further analysis shows that the lower compressibility of the exposed (111) planes in the nano-octahedrons is believed to be the major factor to the elevation of the phase transition pressure and the sluggishness of the transition.

36 MATERIALS SCIENCE↗

Deuteration Can Impact Micellization Pressure and Cloud Pressure of Polystyrene-block-polybutadiene and Polystyrene-block-polyisoprene in Compressible Propane

The deuterated homopolymers and their corresponding polystyrene-block-polybutadiene and polystyrene-block-polyisoprene copolymers require lower cloud pressures than their hydrogenous analogues to dissolve in a compressible alkane solvent, such as propane. For symmetric diblocks, deuteration reduces the micellization pressure. By contrast, for asymmetric diblocks with a long diene block relative to the styrene block, deuteration can increase the micellization pressure. All in all, however, the deuteration effects, while measurable, do not qualitatively change the principal diblock properties in compressible propane solutions, such as pressure-induced micelle decomposition, micelle formation and micelle size, and their temperature dependence. Therefore, isotope labeling should be a useful approach to neutron-scattering characterization for styrene-diene block copolymers in compressible alkane systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Static High Pressure X-Ray Diffraction of TI-6AL-4V

Ti-6Al-4V was examined under static-high pressure conditions using a diamond anvil cell. The angle-dispersive x-ray diffraction experiments were performed at the Advanced Photon Source, Argonne National Laboratory. Radial and axial geometry were used to examine multiple samples. The purpose of the experiment was to generate pressure-volume data at room temperature (which is non-existent in literature) and to examine deviatoric stress effects on such a hard alloy.

43 PARTICLE ACCELERATORS↗

Structural and chemical properties of the nitrogen-rich energetic material triaminoguanidinium 1-methyl-5-nitriminotetrazolate under pressure

The structural and chemical properties of the bi-molecular, hydrogen-bonded, nitrogen-rich energetic material triaminoguanidinium 1-methyl-5-nitriminotetrazolate C{sub 3}H{sub 12}N{sub 12}O{sub 2} (TAG-MNT) have been investigated at room pressure and under high pressure isothermal compression using powder x-ray diffraction and Raman and infrared spectroscopy. A stiffening of the equation of state and concomitant structural relaxation between 6 and 14 GPa are found to correlate with Raman mode disappearances, frequency discontinuities, and changes in the pressure dependence of modes. These observations manifest the occurrence of a reversible martensitic structural transformation to a new crystalline phase. The onset and vanishing of Fermi resonance in the nitrimine group correlate with the stiffening of the equation of state and phase transition, suggesting a possible connection between these phenomena. Beyond 15 GPa, pressure induces irreversible chemical reactions, culminating in the formation of a polymeric phase by 60 GPa.

08 HYDROGEN↗