Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Polycrystalline structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Effects of sputtering power on properties of copper oxides thin films deposited on glass substrates

Copper oxides are deposited by radio frequency sputtering using copper target in the mixture of argon and oxygen gasses. The structural and optical properties of the copper oxides deposited at different sputtering powers have been investigated. All the films are single phase polycrystalline. At low RF power (100 W), the film is monoclinic structure of cupric oxide (CuO). Meanwhile, the films are cubic structure of cuprous oxide (Cu2O) at higher RF power. Field emission scanning electron microscopy images show the films have different morphologies with small grain size and consist of a lot of voids. The analysis of energy dispersive X-ray spectroscopy shows that the ratio of Cu to O is increased as the RF power increased. From the ultraviolet–visible spectroscopy, the films have a broad absorption edge in the range of 300–500 nm. The band gap of the films grown at RF power of 100 W, and 120 W and above, were 1.18 eV and 2.16 eV, respectively.

36 MATERIALS SCIENCE↗

Synthesis and characterization of hollow mesoporous BaFe{sub 12}O{sub 19} spheres

A facile method is reported to synthesize hollow mesoporous BaFe{sub 12}O{sub 19} spheres using a template-free chemical etching process. Hollow BaFe{sub 12}O{sub 19} spheres were synthesized by conventional spray pyrolysis. The mesoporous structure is achieved by alkaline ethylene glycol etching at 185 °C, with the porosity controlled by the heating time. The hollow porous structure is confirmed by SEM, TEM, and FIB-FESEM characterization. The crystal structure and magnetic properties are not significantly affected after the chemical etching process. The formation mechanism of the porous structure is explained by grain boundary etching. - Graphical abstract: Hollow spherical BaFe{sub 12}O{sub 19} particles are polycrystalline with both grains and grain boundaries. Grain boundaries have less ordered structure and lower stability. When the particles are exposed to high temperature alkaline ethylene glycol, the grain boundaries are etched, leaving small grooves between grains. These grooves allow ethylene glycol to diffuse inside to further etch the grains. As the grain size decreases, gaps appear on the particle surfaces, and a porous structure is finally formed. - Highlights: • Two-step synthesis method for hollow mesoporous BaFe{sub 12}O{sub 19} spheres is proposed. • Porosity of the product can be regulated by controlling the second step of chemical etching. • The crystal structure and magnetic properties are examined to be little affected during the chemical etching. • The mesoporous structure formation mechanism is explained by grain boundary etching.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phase formation and texture of thin nickel germanides on Ge(001) and Ge(111)

We studied the solid-phase reaction between a thin Ni film and a single crystal Ge(001) or Ge(111) substrate during a ramp anneal. The phase formation sequence was determined using in situ X-ray diffraction and in situ Rutherford backscattering spectrometry (RBS), while the nature and the texture of the phases were studied using X-ray pole figures and transmission electron microscopy. The phase sequence is characterized by the formation of a single transient phase before NiGe forms as the final and stable phase. X-ray pole figures were used to unambiguously identify the transient phase as the ϵ-phase, a non-stoichiometric Ni-rich germanide with a hexagonal crystal structure that can exist for Ge concentrations between 34% and 48% and which forms with a different epitaxial texture on both substrate orientations. The complementary information gained from both RBS and X-ray pole figure measurements revealed a simultaneous growth of both the ϵ-phase and NiGe over a small temperature window on both substrate orientations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spontaneous formation of circular and vortex ferroelectric domain structure in hexagonal YMnO{sub 3} and YMn{sub 0.9}Fe{sub 0.1}O{sub 3} prepared by low temperature solution synthesis

We report an experimental study of the domain structure of ferroelectric YMnO{sub 3} and YMn{sub 0.9}Fe{sub 0.1}O{sub 3} using polycrystalline samples prepared by direct hydrothermal crystallisation at 240 °C, well below their structural phase transition temperatures. Powder X-ray diffraction shows the expected P6{sub 3}cm space group for both samples with an increase in a and a small decrease in c with Fe incorporation, consistent with an adjustment of MnO{sub 5} tilting, while XANES spectra at the Mn and Fe K edges show the oxidation state of both metals are maintained at +3 in the doped sample. High resolution TEM shows that curved stripe, annular and vortex domains can all be observed in the YMnO{sub 3} crystals, proving that the structural phase transition is not the only driving force for the occurrence of the annular and vortex domains. Furthermore, the absence of the annular and vortex domains in YMn{sub 0.9}Fe{sub 0.1}O{sub 3} indicates that the tilting state of MnO{sub 5} bipyramids plays an important role in the domain formation. Atomic resolution STEM images confirm that the ferroelectric domain walls correspond to structural antiphase boundaries similar to the crystals made via high temperature solid-state reactions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Suppression of ferromagnetism governed by a critical lattice parameter in CeTiGe 3 with hydrostatic pressure or V substitution

We combine structural and magnetic measurements to compare the different magnetic phase diagrams between the pressure and substitution studies in CeTiGe 3 . We report on the structural, magnetic, and electrical transport properties of single crystals of CeTi 1–x V x Ge 3 (x = 0, 0.1, 0.2, 0.3, 0.4, 0.9, and 1), and of polycrystalline samples (x = 0.5, 0.6, 0.7, 0.8), as well as structural properties of CeTiGe 3 under pressure up to 9 GPa. The ferromagnetic ordering in CeTiGe 3 is suppressed with V doping in CeTi 1–x V x Ge 3 , and suggests a possible ferromagnetic quantum critical point near x = 0.45. We perform a detailed crystalline electric field (CEF) analysis, and the magnetic susceptibility data in pure CeTiGe 3 and CeVGe 3 can be well explained by the CEF model. The proposed CEF energy levels suggest that there is a gradual change of the ground state from |±5/2 in CeTiGe 3 to |±1/2 in CeVGe 3 , and a suppression of CEF splitting energies near the quantum critical region. When hydrostatic pressure is used instead of chemical substitution, the quantum critical point is avoided by the appearance of magnetic phases above around 4.1 GPa. In the substitution study, the ferromagnetic and antiferromagnetic regions are well separated, whereas they touch in the pressure study. We observe a different trend in the temperature dependence of the resistivity maximum in both studies, suggesting that the CEF splitting energy is suppressed by V substitution but enhanced by pressure. Here, we also observe different responses in lattice constants between the two studies, highlighting the fact that substitution effects cannot be reduced to chemical pressure effects only. Nevertheless, when the magnetic phase diagrams of both hydrostatic pressure and substitution are compared, we find a common critical lattice constant c = 5.78 Å where the ferromagnetic ordering is suppressed in both studies.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Particle and crystallite size effects on the modulated structure of multiferroic CaMn{sub 7}O{sub 12}

A systematic study of the atomic position modulation in polycrystalline CaMn{sub 7}O{sub 12} with different particle sizes (determined from scanning electron microscopy) and crystallite sizes (determined from X-ray diffraction) is reported. The morphology and phase composition are characterised by scanning electron microscopy, selected area electron diffraction and energy dispersive X-ray spectroscopy. The crystal structure and the atomic position modulation in polycrystalline CaMn{sub 7}O{sub 12} samples are explored with high-resolution synchrotron radiation based powder X-ray diffraction. The modulation vector and the modulation amplitudes observed at T=10 K do not change as a function of particle size, crystallite size and microstrain fluctuations. In addition, we report and discuss the formation of the additional CaMn{sub 4}O{sub 8} nanowire phase during high temperature annealing. - Graphical abstract: The particle size morphology of the multiferroic CaMn{sub 7}O{sub 12} has a weak influence on the atomic position modulation length and the amplitude of the atomic position modulation below T=250 K. Highlights: Black-Right-Pointing-Pointer Atomic position modulation occurs in CaMn{sub 7}O{sub 12} with different particle sizes. Black-Right-Pointing-Pointer The modulation length is the same for different CaMn{sub 7}O{sub 12} particle sizes. Black-Right-Pointing-Pointer Nanowire shaped crystals of CaMn{sub 4}O{sub 8} can be synthesized.

36 MATERIALS SCIENCE↗

A Fundamental Study of Inorganic Clathrate and Other Open-Framework Materials

Due to formidable synthetic challenges, many materials of scientific and technological interest are first obtained as microcrystalline powders. High purity, high yield processing techniques are often lacking and thus care must be taken in interpretation of the observed structural, chemical, and physical properties of powder or polycrystalline materials, which can be strongly influenced by extrinsic properties. Furthermore, the preparation of high-quality single crystals for many materials by traditional techniques can be especially challenging in cases where the elemental constituents have greatly differing melting points and/or vapor pressures, when the desired compound is thermodynamically metastable, or where growth with participation of the melt is generally not possible. New processing techniques are therefore imperative in order to investigate the intrinsic properties of these materials and elucidate their fundamental physical properties. Intermetallic clathrates constitute one such class of materials. The complex crystal structures of intermetallic clathrates are characterized by mainly group 14 host frameworks encapsulating guest-ions in polyhedral cages. The unique features of clathrate structures are intimately related to their physical properties, offering ideal systems for the study of structure-property relationships in crystalline solids. Moreover, intermetallic clathrates are being actively investigated due to their potential for application in thermoelectrics, photovoltaics and opto-electronics, superconductivity, and magnetocaloric technologies. We have developed different processing techniques in order to synthesize phase-pure high yield clathrates reproducibly, as well as grow single crystals for the first time. We also employed these techniques to synthesize new “open-framework” compounds. These advances in materials processing and crystal growth allowed for the investigation of the physical properties of a variety of different clathrate compositions for the first time.

36 MATERIALS SCIENCE↗

Morphological, structural and optical characterization of SnO2 nanotube arrays fabricated using anodic alumina (AAO) template-assisted atomic layer deposition

Highlights: • SnO{sub 2} nanotubes were fabricated by AAO template-assisted atomic layer deposition. • Bulk and surface structure of the SnO{sub 2} nanotubes (NTs) were studied in detail. • The SnO{sub 2} nanotube arrays emitted green light centered at around 520 nm. • PL properties of the SnO{sub 2} NTs depended on their morphology and surface structure. - Abstract: Self-aligned and equal-space SnO{sub 2} nanotubes (NTs) with external diameters ranging from ca. 124 to ca. 325 nm and wall thickness of around 30 nm were synthesized by AAO template-assisted atomic layer deposition. The bulk and surface structure of the SnO{sub 2} nanostructures were studied in detail by XRD and XPS techniques, respectively. The SnO{sub 2} NTs were polycrystalline with an average crystallite size of ca. 3 nm. The structure analysis has revealed that the SnO{sub 2} NTs are composed of the rutile-type SnO{sub 2}. The SnO{sub 2} nanotube arrays with the smaller external diameters emitted green light centered at around 520 nm. The emission was ascribed to the radiative recombination between electrons trapped in shallow donor levels and holes at the intrinsic surface states, associated with the oxygen deficient sites near surface region. The PL intensity diminished with the nanotube diameter and spacing. With increasing external diameter of the SnO{sub 2} nanotubes and decreasing the distance between the neighboring nanotubes, the emission become progressively weaker. The results demonstrate that the structure, morphology and arrangement of SnO{sub 2} nanotubes play an important role in their luminescent properties.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Structural, dielectric and magnetic studies of Ba and Nb codoped BiFeO{sub 3} multiferroics

Polycrystalline materials with composition Bi{sub 0.8}Ba{sub 0.2}Fe{sub 1-x}Nb{sub x}O{sub 3} (x= 0.07, 0.10) were prepared via solid state reaction method. Preliminary analysis of structure was performed by XRD technique and confirmed formation of single phase crystalline materials. Rietveld refinement reveled that these materials have rhombohedral phase with R3c space group. Dielectric constant increased with temperature and Nb concentration. Ba and Nb co-doping suppress the spiral spin structure and produce net magnetization.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic properties and transformation of crystal structure in the ErFe{sub 2}-ErAl{sub 2} system

The modification of structural properties and magnetic behaviour of the ErFe{sub 2−x}Al{sub x} Laves phase intermetallic compounds have been studied while changing the Al content in the range 0.36 ≤ x ≤ 1.5. Powder X-ray diffraction study at room temperature showed the formation of the cubic C15 structure, in the samples with Al content of 0.36 ≤ x < 0.75 and 1.4 ≤ x ≤ 2.0. For the intermediate compositions with 0.75 ≤ x ≤ 1.4, the hexagonal C14 structure is observed. Magnetic and magnetocaloric properties of polycrystalline ErFe{sub 2−x}Al{sub x} intermetallic compounds were investigated experimentally using magnetic and heat capacity measurements. The Curie temperature T{sub C} decreases from 275 to 28 K as the Al content increases from x = 0.36 to x = 1.5, respectively. Magnetization measurements in strong magnetic fields showed the complex mechanism of magnetic saturation in the studied compounds. Under an external field change from 0 to 2 T, the maximum entropy change is 6 J/kg K at T = 28 K for the composition with x = 1.5. The minimum in the concentration dependence of the magnetic entropy change is observed in the vicinity of x equal to 1.25. Regularities of variations of magnetocaloric properties of ErFe{sub 2−x}Al{sub x} intermetallic compounds with increasing Al content are discussed from the point of view of their both structural and magnetic states.

36 MATERIALS SCIENCE↗

Strain profiles in ion implanted ceramic polycrystals: An approach based on reciprocal-space crystal selection

The determination of the state of strain in implanted materials is a key issue in the study of their mechanical stability. Whereas this question is nowadays relatively easily solved in the case of single crystals, it remains a challenging task in the case of polycrystalline materials. In this paper, we take benefit of the intense and parallel beams provided by third generation synchrotron sources combined with a two-dimensional detection system to analyze individual grains in polycrystals, hence obtaining “single crystal-like” data. The feasibility of the approach is demonstrated with implanted UO{sub 2} polycrystals where the in-depth strain profile is extracted for individual grains using numerical simulations of the diffracted signal. The influence of the implantation dose is precisely analyzed for several diffracting planes and grains. This work suggests that, at low fluences, the development of strain is mainly due to ballistic effects with little effect from He ions, independently from the crystallographic orientation. At higher fluences, the evolution of the strain profiles suggests a partial and anisotropic plastic relaxation. With the present approach, robust and reliable structural information can be obtained, even from complex polycrystalline ceramic materials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Chemical and structural studies of 'Brownlee' particles

Several techniques were applied to the study of small particles (around 10 microns) collected in the upper atmosphere by U-2 aircraft. The major element chemistry of roughly 1/3 of the particles is similar to that of chondritic meteorites, although considerable variation of element ratios is observed from particle to particle, and even within a given particle. All particles of 'chondritic' composition are polycrystalline aggregates. About half have fully re-entrant structures; the remaining ones have more compact structures ranging from platey to spherical morphologies. Micro-crystallites with various internal structures are observed in the size range from less than 100 A to several microns. Although tracks are clearly observed in transmission electron microscope examination of terrestrial analog crystals, no tracks of solar flare origin have yet been identified in the U-2 particles. Induced fission track analysis of one aggregate shows that the U concentration is less than 15 ppbm, lending support to the extraterrestrial origin hypothesis.

Flynn, G. J.↗

Analysis of macromolecules, ligands and macromolecule-ligand complexes

A method for determining atomic level structures of macromolecule-ligand complexes through high-resolution powder diffraction analysis and a method for providing suitable microcrystalline powder for diffraction analysis are provided. In one embodiment, powder diffraction data is collected from samples of polycrystalline macromolecule and macromolecule-ligand complex and the refined structure of the macromolecule is used as an approximate model for a combined Rietveld and stereochemical restraint refinement of the macromolecule-ligand complex. A difference Fourier map is calculated and the ligand position and points of interaction between the atoms of the macromolecule and the atoms of the ligand can be deduced and visualized. A suitable polycrystalline sample of macromolecule-ligand complex can be produced by physically agitating a mixture of lyophilized macromolecule, ligand and a solvent.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural and physical properties of layered oxy-arsenides LnRuAsO (Ln=La, Nd, Sm, Gd)

Polycrystalline samples of LaRuAsO, NdRuAsO, SmRuAsO, and GdRuAsO have been synthesized and studied using powder x-ray diffraction, electrical transport, magnetization, and heat capacity measurements. Variations in structural properties across the series reveal a trend toward more ideal tetrahedral coordination around Ru as the size of the rare earth element is reduced. The lattice parameters of these Ru compounds show a more anisotropic response to variation in Ln than their Fe analogs, and significant anisotropy in thermal expansion is also observed. Transport measurements show metallic behavior, and carrier concentrations near 10{sup 21}-10{sup 22} electrons per cm{sup 3} are inferred from simple analysis of Hall effect measurements. Anomalies in resistivity, magnetization, and heat capacity indicate antiferromagnetic ordering of rare earth moments at 5 K for GdRuAsO, 4.5 K for SmRuAsO, and <2K for NdRuAsO. Magnetization measurements on LaRuAsO show no evidence of a magnetic moment on Ru. Observed behaviors are compared to those reported for similar Fe and Ru compounds. - Graphical abstract: Analysis of crystal structure, electrical transport, magnetic susceptibility, and heat capacity of LaRuAsO, NdRuAsO, SmRuAsO, and GdRuAsO. Highlights: Black-Right-Pointing-Pointer Experimental investigation of LaRuAsO, NdRuAsO, SmRuAsO, and GdRuAsO. Black-Right-Pointing-Pointer Anisotropic lattice response to changing Ln radius and temperature. Black-Right-Pointing-Pointer Ru coordination becomes more ideal as Ln radius is reduced. Black-Right-Pointing-Pointer Transport measurements reveal metallic conduction dominated by electrons. Black-Right-Pointing-Pointer Magnetic measurements indicate antiferromagnetic ordering Nd, Sm, and Gd moments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ferroelectric properties of lead-free polycrystalline CaBi{sub 2}Nb{sub 2}O{sub 9} thin films on glass substrates

CaBi{sub 2}Nb{sub 2}O{sub 9} (CBNO) thin film, a lead-free ferroelectric material, was prepared on a Pt/Ta/glass substrate via pulsed laser deposition. The Ta film was deposited on the glass substrate for a buffer layer. A (115) preferred orientation of the polycrystalline CBNO thin film was verified via X-ray diffraction measurements. The CBNO thin film on a glass substrate exhibited good ferroelectric properties with a remnant polarization of 4.8 μC/cm{sup 2} (2P{sub r} ∼9.6 μC/cm{sup 2}), although it had lower polarization than the epitaxially c-oriented CBNO thin film reported previously. A mosaic-like ferroelectric domain structure was observed via piezoresponse force microscopy. Significantly, the polycrystalline CBNO thin film showed much faster switching behavior within about 100 ns than that of the epitaxially c-oriented CBNO thin film.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Neutron diffraction studies of RSn{sub 1+x}Ge{sub 1-x} (R=Tb-Er) compounds

The magnetic structures of RSn{sub 1+x}Ge{sub 1-x} (R=Tb, Dy, Ho and Er, x{approx}0.1) compounds have been determined by neutron diffraction studies on polycrystalline samples. The data recorded in a paramagnetic state confirmed the orthorhombic crystal structure described by the space group Cmcm. These compounds are antiferromagnets at low temperatures. The magnetic ordering in TbSn{sub 1.12}Ge{sub 0.88} is sine-modulated described by the propagation vector k=(0.4257(2), 0, 0.5880(3)). Tb magnetic moment equals 9.0(1) {mu}{sub B} at 1.62 K. It lies in the b-c plane and form an angle {theta}=17.4(2) deg. with the c-axis. This structure is stable up to the Neel temperature equal to 31 K. The magnetic structures of RSn{sub 1+x}Ge{sub 1-x}, where R are Dy, Ho and Er at low temperatures are described by the propagation vector k=(1/2, 1/2, 0) with the sequence (++-+) of magnetic moments in the crystal unit cell. In DySn{sub 1.09}Ge{sub 0.91} and HoSn{sub 1.1}Ge{sub 0.9} magnetic moments equal 7.25(15) and 8.60(6) {mu}{sub B} at 1.55 K, respectively. The moments are parallel to the c-axis. For Ho-compound this ordering is stable up to T{sub N}=10.7 K. For ErSn{sub 1.08}Ge{sub 0.92}, the Er magnetic moment equals 7.76(7) {mu}{sub B} at T=1.5 K and it is parallel to the b-axis. At T{sub t}=3.5 K it tunes into the modulated structure described by the k=(0.496(1), 0.446(4), 0). With the increase of temperature there is a slow decrease of k{sub x} component and a quick decrease of k{sub y} component. The Er magnetic moment is parallel to the b-axis up to 3.9 K while at 4 K and above it lies in the b-c plane and form an angle 48(3) deg. with the c-axis. In compounds with R=Tb, Ho and Er the magnetostriction effect at the Neel temperature is observed. - Graphical abstract: The magnetic structures of RSn{sub 1+x}Ge{sub 1-x} (R=Tb, Dy, Ho and Er, x{approx}0.1) compounds have been determined by neutron diffraction studies on polycrystalline samples. The magnetic ordering in TbSn{sub 1.12}Ge{sub 0.88} (a) is sine-modulated described by the propagation vector k=(0.426, 0, 0.588). The magnetic structures of RSn{sub 1+x}Ge{sub 1-x} where R are Dy (b), Ho (b) and Er (c) at temperatures close to 1.5 K are described by the propagation vector k=(1/2, 1/2, 0) with the sequence (++-+) of magnetic moments in the crystal unit cell. For Ho- and Dy-compound this ordering is stable up to T{sub N} while for Er-compound at T{sub t}=3.5 K it tunes into a modulated structure (d). Highlights: > We determine crystal and magnetic structures of RSn{sub 1+x}Ge{sub 1-x} (R=Tb, Dy, Ho, Er, x{approx}0.1) compounds. > We compare the results with those for RT{sub x}X{sub 2} (X=Ge, Sn) compounds. > We examine the influence of other components (T, Sn, Ge) on magnetic ordering in R-sublattices. > Magnetic ordering in RSn{sub 1+x}Ge{sub 1-x} compounds is similar to those observed in RT{sub x}X{sub 2} compounds. > Other elements (T, Sn, Ge) have not got significant influence on stability of magnetic ordering.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural and multiferroic properties of self doped yttrium manganites YMn{sub 1+X}O{sub 3}

We have prepared the polycrystalline samples of compositions YMn{sub 1+x}O{sub 3} (x =0, 0.17) and studied their structural properties using x-ray diffraction and Raman spectroscopy measurements. The sample with composition Y:Mn = 1:1 showed the antiferromagnetic transition in the magnetization verses temperature (M-T) measurements near 70 K similar to standard YMnO{sub 3}. But the sample with composition Y:Mn = 1:1.17 showed glass like magnetic transition around 42 K in the M-T measurements. Also, a hysteresis in the isothermal magnetization curve at 2K was observed for the Mn rich sample, while the linear trend of magnetization with magnetic field was noted for the sample with equal Y/Mn ratio at 2K. We understood that the Mn excess in Mn rich sample results in the formation of Mn{sup 2+} ions and the magnetic exchange among the Mn{sup 3+/}Mn{sup 2+} ions is responsible for the observed magnetic behaviour. The room temperature ferroelectric properties of the studied samples were also investigated by measuring P-E loops.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Local Multimodal Electro-Chemical-Structural Characterization of Solid-Electrolyte Grain Boundaries

Typical models of polycrystalline ionic materials treat the grain boundary properties as single valued, without consideration of the full range of values that define the macroscopically measured average. Here a unique experimental platform suitable for local multimodal characterization of individual grain boundaries in bicrystal fibers is reported. A variation of three orders of magnitude in the grain boundary conductivity of ceria is observed, as measured across six individual bicrystals by both alternating current impedance spectroscopy and direct current (D.C.) linear sweep voltammetry. Nonlinear behavior of the D.C. measurements is consistent with resistance due to a space charge effect. Time-of-flight secondary ion beam spectroscopy reveals a correlation between grain boundary resistance and the concentration of impurities Si, Al, and Ca segregated at the grain boundaries, although the bulk concentrations of these impurities are negligible. Electron backscatter diffraction analysis of the crystal orientations suggests a correlation between the misorientation across the grain boundaries and grain boundary resistance. These correlations point towards a grain boundary resistance that arises from impurity-generated space charge effects and variations in impurity concentration and hence resistivity driven by the energetics of impurity segregation to grain boundaries of differing surface energies.

36 MATERIALS SCIENCE↗