Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Phase Field Model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Thermally induced phase changes, lateral heterogeneity of the mantle, continental roots, and deep slab anomalies

Factors which influence the lateral heterogeneity in density and seismic velocity with depth in the upper earth mantle are discussed. It is emphasized that most of the increases in density and seismic velocity with depth are caused by pressure-induced solid-solid phase changes in the high-density high-velocity phases of mineral assemblage, due to variations in temperature. In particular, the ilmenite form of MgSiO3 and the gamma-spinel form of Mg2SiO4 have broad stability fields in cold mantle and are not stable in hotter mantle. It is emphasized that the density and velocity anomalies associated with temperature-induced phase changes in mineral assemblage must be taken into account in the thermal models of the slabs; when these effects are accounted for, the geoid and seismic anomalies associated with subducted slabs are consistent with slab confinement to the upper mantle and with layered models of mantle convection.

Anderson, Don L.↗

Evaluation of the communications impact of a low power arcjet thruster

The interaction of a 1 kW arcjet thruster plume with a communications signal is evaluated. A two-parameter, source flow equation has been used to represent the far flow field distribution of the arcjet plume in a realistic spacecraft configuration. Modelling the plume as a plasma slab, the interaction of the plume with a 4 GHz communications signal is then evaluated in terms of signal attenuation and phase shift between transmitting and receiving antennas. Except for propagation paths which pass very near the arcjet source, the impacts to transmission appear to be negligible. The dominant signal loss mechanism is refraction of the beam rather than absorption losses due to collisions. However, significant reflection of the signal at the sharp vacuum-plasma boundary may also occur for propagation paths which pass near the source.

Carney, Lynnette M.↗

Ion phase space densities in the Jovian magnetosphere

The Voyager Low Energy Charged Particle ion data from the Jovian magnetosphere were analyzed to determine the phase-space densities of particles in the region between 5 and 80 Jupiter radii. Data from the Jovian current sheet crossings for locally mirroring particles were used. These are the first calculations of phase-space densities in the nondipolar field region containing the Jovian magnetodisk current sheet. The profiles are consistent with lossy inward radial transport and a source in the outer magnetosphere. The inferred loss rate in a radial diffusion model measuring how quickly particles are scattered out of the neutral sheet exceeds the usual strong diffusion loss rate.

Paranicas, C. P.↗

Domain wall formation in late-time phase transitions

We examine domain wall formulation in late time phase transitions. We find that in the invisible axion domain wall phenomenon, thermal effects alone are insufficient to drive different parts of the disconnected vacuum manifold. This suggests that domain walls do not form unless either there is some supplemental (but perhaps not unreasonable) dynamics to localize the scalar field responsible for the phase transition to the low temperature maximum (to an extraordinary precision) before the onset of the phase transition, or there is some non-thermal mechanism to produce large fluctuations in the scalar field. The fact that domain wall production is not a robust prediction of late time transitions may suggest future directions in model building.

Kolb, Edward W.↗

Solidification processing superalloys in an electric field

The phase morphology of a given superalloy's microstructure is established during solidification. Solidification-processing in an applied electric field is a technique currently undergoing experimental characterization at NASA-Marshall. The method is predicated on the simplest model of a metallic solid, in which ions are arranged in basic space lattices that are permeated by an 'electron gas' whose valence electrons are free to move in the solid. When in a superheated liquid state, the metal is seen as a dense 'cold plasma' of electrons and ions. The application of an electric field during solidification establishes a steady, continuous current flow; the direction of propagation of the plasma waves coincides with the direction of the electric field. Such an alignment introduces an ordered arrangement of the electric vectors and introduces an additional degree of order in an already highly ordered alloy.

Ahmed, Shaffiq↗

Gamma radiation from pulsar magnetospheric gaps

We investigate the production of gamma rays in two pulsar emission models: the 'polar cap' model and the 'outer cap' model. For the former, we have performed detailed simulations of energetic electrons flowing in the vacuum dipole open field line region. In the outer gap case, we generate light curves for various magnetosphere geometries. Using data from radio and optical observations, we construct models for specific viewing angles appropriate to the Crab and Vela pulsars. Phase-resolved spectra are also computed in the polar cap case and provide signatures for testing the models. The calculations have been extended to include millisecond pulsars, and we have been able to predict fluxes and spectra for populations of recycled pulsars, which are compared to COS B data for globular cluster populations.

Chiang, James↗

Computations of Boiling in Microgravity

The absence (or reduction) of gravity, can lead to major changes in boiling heat transfer. On Earth, convection has a major effect on the heat distribution ahead of an evaporation front, and buoyancy determines the motion of the growing bubbles. In microgravity, convection and buoyancy are absent or greatly reduced and the dynamics of the growing vapor bubbles can change in a fundamental way. In particular, the lack of redistribution of heat can lead to a large superheat and explosive growth of bubbles once they form. While considerable efforts have been devoted to examining boiling experimentally, including the effect of microgravity, theoretical and computational work is limited to very simple models. In this project, the growth of boiling bubbles is studied by direct numerical simulations where the flow field is fully resolved and the effects of inertia, viscosity, surface deformation, heat conduction and convection, as well as the phase change, are fully accounted for. The proposed work is based on previously funded NASA work that allowed us to develop a two-dimensional numerical method for boiling flows and to demonstrate the ability of the method to simulate film boiling. While numerical simulations of multi-fluid flows have been advanced in a major way during the last five years, or so, similar capability for flows with phase change are still in their infancy. Although the feasibility of the proposed approach has been demonstrated, it has yet to be extended and applied to fully three-dimensional simulations. Here, a fully three-dimensional, parallel, grid adaptive code will be developed. The numerical method will be used to study nucleate boiling in microgravity, with particular emphasis on two aspects of the problem: 1) Examination of the growth of bubbles at a wall nucleation site and the instabilities of rapidly growing bubbles. Particular emphasis will be put on accurately capturing the thin wall layer left behind as a bubble expands along a wall, on computing instabilities on bubble surfaces as bubbles grow, and on quantifying the effects of both these phenomena on heat transfer; and 2) Examination of the effect of shear flow on bubble growth and heat transfer.

Tryggvason, Gretar↗

A Practical Approach to Obstacle Field Route Planning for Unmanned Rotorcraft

Autonomous helicopter operations in the near-earth environment will require robust and efficient obstacle field route planning. A method for obstacle field route planning is presented, which is composed of a mesh generation phase, a graph search phase, and a route refinement phase. The method mixes optimization and heuristics to obtain a satisfactory solution quickly. Simulations based on an unmanned helicopter model are presented.

Howlet, Jason K.↗

Wide Angle Liquid Crystal Optical Phased Array

Accurate modeling of a high resolution, liquid crystal (LC) based, optical phased array (OPA) is shown. The simulation shows excellent agreement with a test 2-D LC OPA. The modeling method is extendable to cases where the array element size is close to the wavelength of light. The fringing fields of such a device are first studied, and subsequently reduced. This results in a device that demonstrates plus or minus 7.4 degrees of continuous beam steering at a wavelength of 1550 nm, and a diffraction efficiency (DE) higher than 72%.

Wang, Xing-Hua↗

Linearized Aeroelastic Solver Applied to the Flutter Prediction of Real Configurations

A fast-running unsteady aerodynamics code, LINFLUX, was previously developed for predicting turbomachinery flutter. This linearized code, based on a frequency domain method, models the effects of steady blade loading through a nonlinear steady flow field. The LINFLUX code, which is 6 to 7 times faster than the corresponding nonlinear time domain code, is suitable for use in the initial design phase. Earlier, this code was verified through application to a research fan, and it was shown that the predictions of work per cycle and flutter compared well with those from a nonlinear time-marching aeroelastic code, TURBO-AE. Now, the LINFLUX code has been applied to real configurations: fans developed under the Energy Efficient Engine (E-cubed) Program and the Quiet Aircraft Technology (QAT) project. The LINFLUX code starts with a steady nonlinear aerodynamic flow field and solves the unsteady linearized Euler equations to calculate the unsteady aerodynamic forces on the turbomachinery blades. First, a steady aerodynamic solution is computed for given operating conditions using the nonlinear unsteady aerodynamic code TURBO-AE. A blade vibration analysis is done to determine the frequencies and mode shapes of the vibrating blades, and an interface code is used to convert the steady aerodynamic solution to a form required by LINFLUX. A preprocessor is used to interpolate the mode shapes from the structural dynamics mesh onto the computational fluid dynamics mesh. Then, LINFLUX is used to calculate the unsteady aerodynamic pressure distribution for a given vibration mode, frequency, and interblade phase angle. Finally, a post-processor uses the unsteady pressures to calculate the generalized aerodynamic forces, eigenvalues, an esponse amplitudes. The eigenvalues determine the flutter frequency and damping. Results of flutter calculations from the LINFLUX code are presented for (1) the E-cubed fan developed under the E-cubed program and (2) the Quiet High Speed Fan (QHSF) developed under the Quiet Aircraft Technology project. The results are compared with those obtained from the TURBO-AE code. A graph of the work done per vibration cycle for the first vibration mode of the E-cubed fan is shown. It can be seen that the LINFLUX results show a very good comparison with TURBO-AE results over the entire range of interblade phase angle. The work done per vibration cycle for the first vibration mode of the QHSF fan is shown. Once again, the LINFLUX results compare very well with the results from the TURBOAE code.

Reddy, Tondapu S.↗

Magnetic Helicity Condensation and the Solar Cycle

Solar filaments exhibit a global chirality pattern where dextral/sinistral filaments, corresponding to negative/ positive magnetic helicity, are dominant in the northern/southern hemisphere. This pattern is opposite to the sign of magnetic helicity injected by differential rotation along east–west oriented polarity inversion lines, posing a major conundrum for solar physics. A resolution of this problem is offered by the magnetic helicity-condensation model of Antiochos. To investigate the global consequences of helicity condensation for the hemispheric chirality pattern, we apply a temporally and spatially averaged statistical approximation of helicity condensation. Realistic magnetic field configurations in both the rising and declining phases of the solar cycle are simulated. For the helicity-condensation process, we assume convective cells consisting of positive/negative vorticities in the northern/southern hemisphere that inject negative/positive helicity. The magnitude of the vorticity is varied as a free parameter, corresponding to different rates of helicity injection. To reproduce the observed percentages of dominant and minority filament chiralities, we find that a vorticity of magnitude 2.5 x 10(exp −6)/s is required. This rate, however, is insufficient to produce the observed unimodal profile of chirality with latitude. To achieve this, a vorticity of at least 5 x 10(exp −6)/s is needed. Our results place a lower limit on the small-scale helicity injection required to dominate differential rotation and reproduce the observed hemispheric pattern. Future studies should aim to establish whether the helicity injection rate due to convective flows and/or flux emergence across all latitudes of the Sun is consistent with our results.

Mackay, Duncan H.↗

Effect of Geometric Granularity on the Noise Signature of a Full-Scale Large Civil Transport Nose Landing Gear

Results from a comprehensive simulation campaign focused on characterizing the air-frame noise signature of a full-scale Boeing 777-300ER nose landing gear are presented. The as-flown, installed nose gear geometry was used to assess how accurately the selected computational methodology can predict far-field noise before extending the simulation approach to the complete B777-300ER aircraft in landing configuration. To facilitate direct comparisons with experimental data, the simulations were conducted for conditions matching those recorded for a flyby of the same aircraft over the ground-based phased microphone array used during the 2005 Quiet Technology Demonstrator II test. The far-field acoustic footprint of the nose landing gear was computed via a Ffowcs-Williams and Hawkings integral approach, with pressures on the model solid surface or flow quantities on a permeable data surface enclosing the gear used as input. A grid refinement study performed for the baseline gear con-figuration to establish the convergence behavior of the far-field spectrum indicated that the sound pressure levels had converged at frequencies slightly beyond 5 kHz for the finest spatial resolution attempted. To ascertain the effects of geometric granularity on far-field noise, simulations of a defeatured version of the nose gear were undertaken. Comparisons with fully-dressed gear results indicated that finer geometric details add 2–4 dB to the sound pressure levels at mid- to high-frequencies (800 Hz to 5 kHz), suggesting that for accurate noise prediction such details cannot be neglected.

airframe noise↗

Assimilation of Dual-Polarimetric Radar Observations with WRF GSI

Dual-polarimetric (dual-pol) radar typically transmits both horizontally and vertically polarized radio wave pulses. From the two different reflected power returns, more accurate estimate of liquid and solid cloud and precipitation can be provided. The upgrade of the traditional NWS WSR-88D radar to include dual-pol capabilities will soon be completed for the entire NEXRAD network. Therefore, the use of dual-pol radar network will have a broad impact in both research and operational communities. The assimilation of dual-pol radar data is especially challenging as few guidelines have been provided by previous research. It is our goal to examine how to best use dual-pol radar data to improve forecast of severe storm and forecast initialization. In recent years, the Development Testbed Center (DTC) has released the community Gridpoint Statistical Interpolation (GSI) DA system for the Weather Research and Forecasting (WRF) model. The community GSI system runs in independently environment, yet works functionally equivalent to operational centers. With collaboration with the NASA Short-term Prediction Research and Transition (SPoRT) Center, this study explores regional assimilation of the dual-pol radar variables from the WSR-88D radars for real case storms. Our presentation will highlight our recent effort on incorporating the horizontal reflectivity (ZH), differential reflectivity (ZDR), specific differential phase (KDP), and radial velocity (VR) data for initializing convective storms, with a significant focus being on an improved representation of hydrometeor fields. In addition, discussion will be provided on the development of enhanced assimilation procedures in the GSI system with respect to dual-pol variables. Beyond the dual-pol variable assimilation procedure developing within a GSI framework, highresolution (≤1 km) WRF model simulations and storm scale data assimilation experiments will be examined, emphasizing both model initialization and short-term forecast of precipitation fields and processes. Further details of the methodology of data assimilation, the impact of different dual-pol variables, the influence on precipitation forecast will be presented at the conference.

Li, Xuanli↗

Assimilation of Dual-Polarimetric Radar Observations with WRF GSI

Dual-polarimetric (dual-pol) radar typically transmits both horizontally and vertically polarized radio wave pulses. From the two different reflected power returns, more accurate estimate of liquid and solid cloud and precipitation can be provided. The upgrade of the traditional NWS WSR-88D radar to include dual-pol capabilities will soon be completed for the entire NEXRAD network. Therefore, the use of dual-pol radar network will have a broad impact in both research and operational communities. The assimilation of dual-pol radar data is especially challenging as few guidelines have been provided by previous research. It is our goal to examine how to best use dual-pol radar data to improve forecast of severe storm and forecast initialization. In recent years, the Development Testbed Center (DTC) has released the community Gridpoint Statistical Interpolation (GSI) DA system for the Weather Research and Forecasting (WRF) model. The community GSI system runs in independently environment, yet works functionally equivalent to operational centers. With collaboration with the NASA Short-term Prediction Research and Transition (SPoRT) Center, this study explores regional assimilation of the dual-pol radar variables from the WSR-88D radars for real case storms. Our presentation will highlight our recent effort on incorporating the horizontal reflectivity (ZH), differential reflectivity (ZDR), specific differential phase (KDP), and radial velocity (VR) data for initializing convective storms, with a significant focus being on an improved representation of hydrometeor fields. In addition, discussion will be provided on the development of enhanced assimilation procedures in the GSI system with respect to dual-pol variables. Beyond the dual-pol variable assimilation procedure developing within a GSI framework, highresolution (≤1 km) WRF model simulations and storm scale data assimilation experiments will be examined, emphasizing both model initialization and short-term forecast of precipitation fields and processes. Further details of the methodology of data assimilation, the impact of different dual-pol variables, the influence on precipitation forecast will be presented at the conference.

Li, Xuanli↗

Silent and Efficient Supersonic Bi-Directional Flying Wing

The supersonic bi-directional (SBiDir) flying wing (FW) concept has a great potential to achieve low sonic boom with high supersonic aerodynamic performance due to removal of performance conflict between high speed and low speed by rotating goo in flight. This NIAC Phase 1 research has achieved three objectives: 2) prove the concept based on simulation that it can achieve very low boom with smooth Sine wave ground over-pressure signature and excellent aerodynamic efficiency; 3) conduct trade study to correlate the geometric parameters with sonic boom and aerodynamic performance for further automated design optimization in Phase II. The design methodology developed in Phase I includes three parts: 1) an advanced geometry model, which can vary airfoil meanline angle distribution to control the expansion and shock waves on the airplane surface to mitigate sonic boom and improve aerodynamic efficiency. 2) a validated CFD procedure to resolve near field flow with accurate shock strength. The sonic boom propagation from near field to far field ground is simulated by NASA NF Boom code. The surface friction drag prediction is based on fiat plate correlation adopted by Seebass and supported by the experimental study of Winter and Smith, which is on the conservative side and is more reliable than CFD RANS simulation. 3) a mission analysis tool based on Corke's model that provides design requirements and constraints of supersonic airplanes for range, payload, volume, size, weight, etc. The design mission target is a supersonic transport with cruise Mach number 1.6, 100 passengers, and 4000nm range. The trade study has several very important findings: 1) The far field ground sonic boom signature is directly related to the smoothness of the flow on the airplane surface. The meanline angle distribution is a very effective control methodology to mitigate surface shock and expansion wave strength, and mitigating compression wave coalescing by achieving smooth loading distribution chord-wise. Compared with a linear meanline angle distribution, a design using nonlinear and non-monotonic meanline angle distribution is able to reduce the sonic boom ground loudness by over 20dBP1. The design achieves sonic boom ground loudness less than 70dBP1 and aerodynamic dynamic efficiency 1/D of 8.4. 2) Decreasing sweep angle within the Mach cone will increase 1/D as well as sonic boom. A design with variable sweep from 84° at the very leading edge to 68° at the tip achieves an extraordinarily high 1/D of 10.4 at Mach number 1.6 due to the low wave drag. If no sonic boom constraint is attached, SBiDir-FW concept still has a lot of room to increase the 1/D. 3) The round leading edge and trailing edge under high sweep angle are beneficial to improve aerodynamic performance, sonic boom, and to increase volume of the airplane. 4) Subsonic performance is benefited greatly from the high slenderness of supersonic configuration after rotating goo. A design with excellent supersonic aspect ratio of 0.44, 1/D of 8.g, gives an extraordinary subsonic aspect ration of 10 and 1/D of 1g.7. Two configurations are designed in details to install internal seats, landing gears, and engine installation to demonstrate the feasibility of SBiDir-FW configuration to accommodate all the required volume for realistic airplane. Here we emphasize that the qualitative findings in Phase I are very encouraging, more important than the quantitative results. Qualitative findings give the understanding of physics and provide the path to achieve the ultimate high performance design. The promising quantitative results achieved in Phase I need to be confirmed by wind tunnel testing in Phase II and ultimately proved by flight test. The other important step forward will be made to study the rotation transition from both CFD unsteady simulation and wind tunnel testing.

Zha, Gecheng↗

Modelisation of the optical scattering behaviour of the vegetation canopies

The three dimensional model of Kimes (1984) which can treat three dimensional variability in heterogeneous scenes, was used to test and expand physical scattering mechanisms involved in reflectance distribution dynamics by analyzing modeling and field data. The major physical phenomena causing the directional scattering behavior of vegetation canopies are presented. These include the strong anisotropic properties of the soil, and the anisotropic scattering properties of the vegetation as described by the phase function of the leaves and the geometric effects caused by vertical layers of leaves. This knowledge serves as a basis for defining optimum directional view angles for remote sensing strategies. An example on using knowledge of the scattering behavior of vegetation to develop techniques for extracting vegetation parameters (spectral albedo) from directional reflectance data is presented.

Kimes, D. S.↗

The QBO and weak external forcing by solar activity: A three dimensional model study

A better understanding is attempted of the physical mechanisms leading to significant correlations between oscillations in the lower and middle stratosphere and solar variability associated with the sun's rotation. A global 3-d mechanistic model of the middle atmosphere is employed to investigate the effects of minor artificially induced perturbations. The aim is to explore the physical mechanisms of the dynamical response especially of the stratosphere to weak external forcing as it may result from UV flux changes due to solar rotation. First results of numerical experiments dealing about the external forcing of the middle atmosphere by solar activity were presented elsewhere. Different numerical studies regarding the excitation and propagation of weak perturbations have been continued since then. The model calculations presented are made to investigate the influence of the quasi-biennial oscillation (QBO) on the dynamical response of the middle atmosphere to weak perturbations by employing different initial wind fields which represent the west and east phase of the QBO.

Dameris, M.↗

Bubble trajectories in rotating drops

The investigation summarized in this paper describes recent normal gravity experiments involving the behavior of compound drops in rotating flows and in particular, the subsequent migration of the less dense phase (air bubble) toward the rotation axis. The data are compared to two models. The first was developed to predict the trajectory of a fluid particle in an infinitely large drop in the presence of both gravitational and rotational fields at the limit of quasi-steady creeping flow. The second predicts the trajectory of a fluid particle in a compound drop in the presence of a rotational field and at the limit of creeping flow. Gravity has not yet been incorporated into this second model.

Brone, D.↗