Performance Assessment as a Management Tool for Prioritizing Nuclear Waste Program Research and Development Activities.
Abstract not provided.
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Abstract not provided.
Abstract not provided.
Abstract not provided.
High-potential molecules derived from biomass sources may suitably replace or supplement traditional nonrenewable hydrocarbon fuels to reduce pollution and fuel processing cost. Experimental property testing of these bioproducts is usually conducted years after initial bench-scale experiments, due to high experimental costs and/or high volume requirements. However, neglecting to conduct property testing early in the pathway development cycle can lead to investments spent on scaling-up production of bioproducts and biofuels that do not perform as expected. Instead, machine-learning techniques can be used to develop quantitative structure–property relationships for molecules using a relatively large training set of molecular descriptor data. For this study, we compiled measured properties, IR spectra, and molecular descriptors of bio-based molecules from databases and published studies for training models of bioproduct properties. We trained regression models with molecular descriptors and will compare results of different estimators. This study describes the first steps towards a performance prediction tool for bio-based alternative fuels. Keywords: Machine learning, biofuels, jet fuels, fuel properties
This report presents the Technical Program Plan for Fiscal Years 2023-2027 (FY2023 to FY2027) for the U.S. Department of Energy (DOE) Light Water Reactor Sustainability Program—Flexible Plant Operation and Generation Research Pathway. The objective of this pathway is to carry out the research needed to help nuclear power plants diversify revenue generation for the life of these plants. The purpose of these research and development activities is two fold: (1) to reduce the technical and economic risks of implementing FPOG applications and (2) to provide guidance on relevant safety and environmental operating license reviews, amendments, and renewals. This pathway provides a clear understanding of the benefits of nuclear energy beyond electricity markets. A detailed description of the research and development activities that have been completed and that are planned for FY2023—FY2027 are presented in this report. These activities include completing the development of analysis tools to perform technical and economic assessments of realistic market opportunities for producing secondary energy products near nuclear power plants. They also include developing and demonstrating engineering systems and control concepts to dispatch thermal and electrical power to an industrial user. Additionally, this plan includes developing guidance for addressing potential regulatory and licensing requirements. In addition, the formation, purpose, and activities of a group referred to as the Hydrogen Regulatory Research and Review Group is discussed. An overview is also provided on the potential benefits of the Infrastructure Investment and Jobs Act (IIJA) Bill that will support the commencement of Regional Clean Hydrogen Hubs, and the Inflation Reduction Act (IRA) that provides compelling production tax credits for nuclear electricity and clean hydrogen using nuclear energy.
Muon Decay-at-Rest ($\mu$DAR) produces electron-neutrinos ($\nu_e$) in the $0$ to $53$ MeV energy range. The given range is especially interesting for its similarity to Supernovae-produced $\nu_e$. The Deep Underground Neutrino Experiment (DUNE) has as one of its main goals to measure Supernovae neutrinos on the occasion of a Galactic Supernova burst. To optimize the chances of detection, a low-energy neutrino-LAr cross-section (XS) measurement is a piece of important information to have at hand. MicroBooNE presents a good opportunity to explore the low-energy $\nu$-LAr detection and XS using the $\mu$DAR neutrinos and therefore develop the tools necessary for DUNE to in is a LArTPC that has been collecting neutrino data since October 2015 from the Booster Neutrino Beam (BNB) and off-axis to the Neutrinos at the Main Injector (NuMI) beam, both copious sources of $\mu$DAR neutrinos. esis, we present a first attempt to measure MeV-scale neutrinos in a LArTPC. To do that, we use specifi c MeV-scale reconstruction tools combined with other traditional reconstruction tools used in MicroBooNE. We discuss the tool's performance, limitations, and provide suggestions on how to improve them. zes looks for $\mu$DAR neutrino- argon charged current interactions in the NuMI Run1 data, that contains $2\times 10^{20}$ POT. We observed $9,176$ signal candidates. The number of expected background events is $8,776$, the majority from cosmic rays. We establish a XS upper limit of $<\sigma> = 1.99\times10^{-37} \textrm{cm}^2 / \textrm{Ar}$, which corresponds to $551.9$ times the nominal prediction from MARLEY, the neutrino generator used in this work. Despite the lack of sensitivity, this work is the first of its kind and sets the foundation for future similar analysis in the future. In the conclusions, we discuss how this results can be further improved in MicroBooNE.
Computer vision techniques are combined with NETL’s machine learning based model trained on results from NETL's long-term SOFC/SOEC performance prediction tool, in order to produce a rapid assessment tool for evaluation and improvement of SOC electrodes from more easily collected microstructural data.
This presentation covers the purpose and scope of an Energy I-Corps project focused on refining a suite of analytical tools designed to support distributed wind deployment. These tools - the Distributed Generation Market Demand (dGen), Distributed Wind Tools Assessing Performance (TAP), and the Hybrid Optimization and Performance Platform (HOPP) - combine to provide users with the ability to simulate consumer purchasing behavior, accurately assess wind resource to better predict turbine performance, and effectively design and optimize hybrid systems that include distributed wind.
Abstract not provided.
The nuclear power industry in several countries is concerned about the ability to maintain high plant performance levels due to aging and obsolescence, knowledge drain, fewer plant staff, and new requirements and commitments. Current plant operations are labor-intensive due to the vast number of operational and support activities required by commonly used technology in most plants. These concerns increase as plants extend their operating life. In addition, there is the goal to further improve performance while reducing human errors and increasingly focus on reducing operations and maintenance costs. New plants are expected to perform more productively than current plants. In order to achieve and increase high productivity, it is necessary to look at innovative applications of modern technologies and new concepts of operation. The Electric Power Research Inst. is exploring and demonstrating modern technologies that enable cost-effectively maintaining current performance levels and shifts to even higher performance levels, as well as provide tools for high performance in new plants. Several modern technologies being explored can provide multiple benefits for a wide range of applications. Examples of these technologies include simulation, visualization, automation, human cognitive engineering, and information and communications technologies. Some applications using modern technologies are described. (authors)
This paper discusses the uncertainty analysis on reactivity and inventory for a typical PWR fuel element as a result of uncertainties in {sup 235,238}U nuclear data. A typical Westinghouse 3-loop fuel assembly fuelled with UO{sub 2} fuel with 4.8% enrichment has been selected. The Total Monte-Carlo method has been applied using the deterministic transport code DRAGON. This code allows the generation of the few-groups nuclear data libraries by directly using data contained in the nuclear data evaluation files. The nuclear data used in this study is from the JEFF3.1 evaluation, and the nuclear data files for {sup 238}U and {sup 235}U (randomized for the generation of the various DRAGON libraries) are taken from the nuclear data library TENDL. The total uncertainty (obtained by randomizing all {sup 238}U and {sup 235}U nuclear data in the ENDF files) on the reactor parameters has been split into different components (different nuclear reaction channels). Results show that the TMC method in combination with a deterministic transport code constitutes a powerful tool for performing uncertainty and sensitivity analysis of reactor physics parameters. (authors)
The U.S. Department of Energy (DOE) Office of Environmental Management (EM) initiated the development of a customized, web-based mapping tool for communicating technical information on groundwater plumes at sites within the EM complex. Although the online tool was initially conceived to be a simple conversion of a paper report on contaminant plume sizes, remedial approaches, and regulatory status, it has advanced to providing specific information on cleanup status and site closure. The story maps provide robust geospatial visualization of plumes at DOE sites, as well as explanatory text, photographs, and video for an entire site, or for a management unit within the site. This collection of story maps is called TRAC (Tracking Restoration And Closure), and not only communicates information for each individual site, but also summarizes pertinent metrics on cleanup and remaining contaminants across all EM sites. TRAC is focused on communicating cleanup status, technical challenges, and needs for site closure, with a key challenge of transforming data into relevant, easily understood information. Although DOE managers are the target audience, the story maps can also be used to contribute to public understanding of groundwater cleanup progress at EM sites. Unlike the data access tools maintained at some EM sites (e.g., Hanford, Portsmouth, and Paducah), TRAC is neither a portal for data downloads, nor a tool for performing data analytics. Rather, the goal of TRAC is to provide relevant information on cleanup progress and closure that is consistent across all sites, allowing the user to view summary information across all sites, or examine information relevant to a particular site. This information sharing is needed to maintain open communications with interested parties and communicate efforts that ensure long-term protection of human health and the environment. (authors)
Since some years, the IRSN has developed a new project to simulate accurately the interaction between neutronic and thermal hydraulic phenomena. This project called ANTARES (Advanced Neutronics and Thermal-hydraulic for the Analysis of Reactor Safety) couples the thermal hydraulic code CATHARE-3 with the 3D neutronic nodal code PARCS. The purpose of this project is to take the advantage of the complementary of these 2 codes, by the knowledge of the 3D core power distribution in CATHARE-3 (computed by PARCS) and improving the thermal hydraulic boundaries conditions in PARCS. In this way, the IRSN diversifies and enlarges its available tools to perform safety analysis with improved accuracy. The current technique usually adopted in France for the safety demonstrations for Reactivity Insertion Accident (RIA) is the so-called 'conservative' approach, which consists of reducing all the feedback (Doppler and moderator effects) and in modifying some physical quantities in such a way to increase a power peak. For this reason, these facilities ('penalties') have been implemented in ANTARES. In this paper we will give two examples of accidental transients that can be simulated with ANTARES: a Main Steam Line Break (MSLB) and an inadvertent boron dilution event. (authors)
Explore the source record for details and available documents.
Design and manufacturing of transparent armor have been historically carried out using experimental approaches. In this study, we use advanced computational modeling tools to perform virtual design evaluations of transparent armor systems under different projectile impact conditions. AHPCRC developed modeling software EPIC’06 [1] is used in predicting the penetration resistance of transparent armor systems. LaGrangian-based finite element analyses combined with particle dynamics are used to simulate the damage initiation and propagation process for the armor system under impact conditions. It is found that a 1-parameter single state model can be used to predict the impact penetration depth with relatively good accuracy, suggesting that the finely comminuted glass particles follow the behavior similar to a viscous fluid. Even though the intact strength of borosilicate and soda lime glass are different, the same fractured strength can be used for both glasses to capture the penetration depth.
The goal of this project is to develop integrated, state-of-the-art, computational modeling tools based on an integrated computational materials engineering (ICME) methodology that are critically needed to enable structural carbon fiber (CF) applications in automobiles. These tools are designed to predict the manufacturing and structural performance of CF composites, including stochastic effects. During the first phase of the project, the manufacturing and structural performance tools, including a stochastic driver, were developed, calibrated, and validated against coupon and component level test results. For this project, from the manufacturing side, the development efforts were focused on high-pressure resin transfer molding (HP-RTM), a potentially game-changing manufacturing technology that is capable of reaching the 3-5-minute cycle time that is necessary for volume manufacturing of composites. On the structural performance side, the crashworthiness of CF structures was studied. Accordingly, computational tools were developed and validated. The resulting differences between the numerical predictions and the experimental results in the first phase of the project were required to be less than 15%. During the second phase of the project, the manufacturing and performance tools were integrated by mapping the manufacturing outcomes (e.g., fiber angles, residual stresses, degree of cure, and defects) into the structural models. Also, using the tools developed in this project, an automotive assembly currently manufactured in steel (2016 GM Malibu) was redesigned to be manufactured using advanced CF composites with the objective of comparing the performance of the CF assembly with the developed ICME model predictions. The weight, performance and cost of the CF assembly were compared with the baseline steel assembly as well. The CF underbody design was shown to be 30% lighter than the corresponding steel design. The CF underbody assembly withstood the side pole impact with less than half the intrusion for the steel assembly. Excellent correlations within 10% for both peak impact load and intrusion were observed between the numerical predictions and experimental results. Based on the cost models developed in the project, the cost increase per Kg saved was determined to be $22. The project team has prepared a total of 28 publications in various journals and conferences and broadly communicated the project results for the benefit of the composite industry. The project team has also prepared a total of 10 patent applications that were submitted to the US Patent and Trademark office.
A suite of analytical and numerical methods and web-assisted tools has been developed in support of remedial design and system performance evaluation at the U.S. Department of Energy's Hanford Site in Richland, Washington. These innovative methods and tools facilitate robust and efficient assessments and provide project scientists with a toolbox for performance monitoring of monitored natural attenuation and pump-and-treat remedies and for identifying necessary design elements and system improvements for attainment of remedial action objectives and ultimately site closure. (authors)
Building energy performance is often inadequate when compared to design goals. To link design goals to actual operation one can compare measured with simulated energy performance data. Our previously developed comparison approach is the Energy Performance Comparison Methodology (EPCM), which enables the identification of performance problems based on a comparison of measured and simulated performance data. In context of this method, we developed a software tool that provides graphing and data processing capabilities of the two performance data sets. The software tool called SEE IT (Stanford Energy Efficiency Information Tool) eliminates the need for manual generation of data plots and data reformatting. SEE IT makes the generation of time series, scatter and carpet plots independent of the source of data (measured or simulated) and provides a valuable tool for comparing measurements with simulation results. SEE IT also allows assigning data points on a predefined building object hierarchy and supports different versions of simulated performance data. This paper briefly introduces the EPCM, describes the SEE IT tool and illustrates its use in the context of a building case study.