Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Reverse water-gas shift: Na doping of m-ZrO 2 supported Pt for selectivity control

Reverse water-gas shift (RWGS) is a vital step in producing syngas for the chemical conversion of CO 2 to liquid transportation fuels and chemicals. Na-doping of m-ZrO 2 supported Pt catalysts allowed selectivity control by systematically increasing the ratio of relative rates of r CO /r CH4 . This was achieved by facilitating the formation of formate intermediate species, which precedes CO formation, and by suppressing the metallic Pt 0 active sites responsible for CH 4 formation. Here, a 2.5%Na-2%Pt/m-ZrO 2 catalyst was first tested for the forward water-gas shift (FWGS) reaction and found to have 50% higher CO conversion at 285°C compared to the undoped catalyst. Results of DRIFTS spectroscopy of adsorbed CO confirmed a formate ν(CH) band shift to lower wavenumbers (2870–2802 cm —1 ) with the addition of Na and more rapid forward formate decomposition in steam to H 2 and carbonate species, the precursor to CO 2 . This is consistent with C-H bond breaking being the rate limiting step of a FWGS mechanism occurring at the metal-support junction. Consistent with this, DRIFTS of RWGS in 4%CO 2 + 60%H 2 showed more facile formation of formate for the Na-doped catalyst and, once again, the ν(CH) band was shifted to lower wavenumbers (2874–2803 cm —1 ) with Na-doping. In addition, Na doping resulted in a systematic decrease in the Pt-carbonyl band in DRIFTS of adsorbed CO as well as DRIFTS of in-situ RWGS reaction tests, suggesting that Na blocked a fraction of on-top Pt sites, breaking up ensembles of Pt 0 responsible for methanation. The selectivity of the 2.5%Na-doped catalyst, unlike its undoped counterpart, was remarkably resistant to methanation (e.g., selectivity < 0.2% CH 4 with pressures of up to 20 bar).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2011

Self-assembly of Pt nanoparticles on highly graphitized carbon nanotubes as an excellent oxygen-reduction catalyst

A novel method for the synthesis of high-performance Pt electrocatalysts on graphitized carbon nanotubes (GCNTs) is reported. GCNTs are first noncovalently functionalized with a polyelectrolyte, poly(diallyldimethylammonium chloride) (PDDA). Pt precursors are uniformly distributed on the surface of PDDA-functionalized GCNTs via the electrostatic self-assembly between negatively charged PtCl62- and positively charged functional groups of PDDA and then Pt nanoparticles are in-situ prepared with the ethylene glycol reduction method. X-ray photoelectron spectroscopy measurement confirms the successful functionalization of PDDA on GCNTs. X-ray diffraction and transmission electron microscope images reveal that Pt nanoparticles with an average size of ~ 2.7 nm are uniformly dispersed on the PDDA-functionalzied GCNTs. Pt/GCNTs electrocatalyst exhibits two times higher activity towards oxygen reduction reaction than Pt/CNTs because of the higher Pt electrochemical surface area and the higher electrical conductivity of GCNTs. Also, Pt/GCNTs exhibit a higher stability than Pt/CNTs. This enhanced durability can be attributed to the structural integrity and higher graphitization degree of GCNTs.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2019

Active and stable Pt-Ceria nanowires@silica shell catalyst: Design, formation mechanism and total oxidation of CO and toluene

Cerium oxide is one of the most important rare earth metal oxides in catalysis, however, the sintering problem of noble metals and CeO 2 at higher temperature (e.g., >700 °C) is still unresolved. Herein, Pt nanoparticles self-assembled on ultra-thin CeO 2 nanowires (NWs) and then confined inside a thermally robust porous silica shell (Pt-CeO2NW@SiO 2 ) were introduced. The thickness of CeO 2 NWs was just ~2.0 nm. Moreover, Pt-CeO 2 NW@SiO 2 showed significantly enhanced catalytic performances for total oxidation of CO and toluene. The increased catalytic properties are attributed to the strong metal-support interaction effect between Pt and CeO 2 NWs at sub-nanoscale. Most importantly, the special core-shell structure also affords excellent sintering resistance retention up to 700 °C for 100 h, due to the guarding effect of porous silica shell. Finally, the formation mechanism of Pt-CeO 2 NW@SiO 2 was investigated in detail. Current strategy should inspire many rational designs of rare-earth metal-based nanocatalysts for real-world catalysts.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Developing single-site Pt catalysts for the preferential oxidation of CO: A surface science and first principles-guided approach

Here, we report a comprehensive study combining surface science, Density Functional Theory (DFT) calculations, and catalyst synthesis, characterization, and testing to investigate the preferential oxidation of CO in the presence of H 2 over single-site Pt 1 /Cu x O catalysts. Surface science studies show that while Pt 1 /Cu x O model surfaces enable low-temperature CO oxidation via a Mars-van Krevelen mechanism, there was no evidence for H 2 activation or oxidation. DFT-based calculations explain these results and demonstrate that the H 2 oxidation barrier is high as compared to H 2 desorption from Pt 1 /Cu x O. Inspired by these model catalyst studies, nanoporous Pt 1 /Cu x O catalysts were synthesized and demonstrated to be active and highly selective for the preferential oxidation of CO. This work highlights the potential of combined surface science, theory, and catalyst studies for identifying new catalytic materials, which in this case led to the development of a promising single-site Pt 1 /Cu x O catalyst for the preferential oxidation of CO.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2014

Nitrogen functionalized carbon black: A support for Pt nanoparticle catalysts with narrow size dispersion and high surface area

Amorphous carbon is widely used as a support for Pt nanoparticle catalysts. We show here that catalytic performance can be greatly improved by functionalizing the carbon support with a nitrogen-containing molecule, in conjunction with a new method for the in situ synthesis of nanocrystalline Pt. Vulcan® carbon black is covalently functionalized with 4-aminomethylpyridine (4AMP) via formation of an acid chloride on the surface followed by amidation. The resulting 4AMP-functionalized Vulcan® (4AMP-VC) was thoroughly characterized and shown to contain N at the surface of the Vulcan® carbon support. We note Pt nanoparticles grown on the 4AMP-VC have a smaller average size and much narrower size distribution than Pt nanoparticles grown on bare Vulcan® (VC). In addition, the Pt/4AMP-VC catalysts show higher catalytic activity and are more durable than their Pt/VC counterparts. We infer through careful analysis of X-ray photoelectron spectra that the Pt nanoparticles bind preferentially to the pyridinic nitrogen of the 4AMP.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2012

Correlation of Pt-Re Surface Properties with Reaction Pathways for the Aqueous-Phase Reforming of Glycerol

The surface properties of Pt-Re catalytic nano-particles supported on carbon following exposure to a hydrogen reducing environment and subsequent hydrothermal conditions have been studied using in-situ X-ray photoelectron spectroscopy (XPS) and ammonia temperature programmed desorption (TPD). These properties have been correlated with the catalyst selectivity for the aqueous phase reforming of glycerol. We show that Pt in reduced Pt-Re/C becomes electron deficient, and a fraction of the Re becomes oxidized when the catalyst is subsequently exposed to hydrothermal reaction conditions. Oxidation of Pt-Re generates surface acidity, which drastically affects the reaction pathways. The acid site concentration, but not acid site strength, increases with Re loading. This acidity increase with Re addition favors C-O over C-C cleavage, which results in higher selectivity to liquid products and alkanes at the expense of hydrogen production. We propose a model for the Pt-Re active site and the origin of acidity enhanced by the addition of Re.

08 HYDROGEN↗
DOE OSTI2018

Carbon-supported Pt during aqueous phenol hydrogenation with and without applied electrical potential: X-ray absorption and theoretical studies of structure and adsorbates

Adsorbed hydrogen and phenol on Pt nanoparticles during (electro)catalytic hydrogenation are explored by combining x-ray absorption spectroscopy and ab initio simulations. Direct evidence for two types of Pt-C bonds at the surface of the metal particles detected by X-ray absorption spectroscopy suggest strong bonding between metal and the carbon support as well as adsorption of phenol nearly parallel to the surface. Hydrogen and phenol compete for accessible Pt sites. The surface concentrations are compatible with the proposal that atomic hydrogen and chemisorbed phenol are the species reacting in the rate-determining step of hydrogenation in the presence and absence of an external cathodic potential. During electrocatalytic hydrogenation the external electric potential controls the concentration of species on the surface, but doesnot impose structural or electronic property changes of the Pt compared to Pt particles in presence of hydrogen gas. Increasing reaction rates with increasing cathodic potential are attributed to the increase in chemical potential of adsorbed H.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

In-operando surface-sensitive probing of electrochemical reactions on nanoparticle electrocatalysts: Spectroscopic characterization of reaction intermediates and elementary steps of oxygen reduction reaction on Pt

In this paper we present an in-operando spectroscopic study of the reaction intermediates involved in ORR on electrified Pt nanoparticle electrocatalysts. To accomplish this, we have synthesized Ag-Pt core–shell nanoparticles, that contain a thin shell of Pt (~1 nm) uniformly deposited on a larger Ag core (~60 nm). We show that these nanostructures are ideal platforms for in-operando Plasmon Enhanced Raman Spectroscopy (PERS) of ORR on Pt. We combined these PERS studies with DFT calculations to assign the measured vibrational spectra to relevant surface intermediates as a function of electrocatalyst potential. Overall, these vibrational assignments were further verified and validated by performing PERS measurements using de-oxygenated and heavy oxygen (O 2 -18) saturated electrolyte. These studies allowed us to identity the presence of critical reaction intermediates (OH, O 2 , OOH, and H 2 O) as the function of operating voltage on the Pt surface and derive voltage-dependent elementary step mechanisms of the reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Electronic, structural and magnetic properties of Mn (1+x) Pt (1-x) Sb

Electronic and magnetic properties of half-metallic Heusler alloys can be modified by tuning their chemical compositions. We have carried out a combined theoretical and experimental investigation of Mn (1+x) Pt (1-x) Sb (0 ≤ x ≤ 0.5) alloys. Our first-principles calculations indicate that the stoichiometric MnPtSb exhibits nearly half-metallic band structure, but a robust half-metallicity can be achieved in Mn-rich compositions Mn (1+x) Pt (1-x) Sb (0 ≤ x ≤ 0.5) with x = 0.25 and higher in their cubic structures. In addition, while MnPtSb exhibits ferromagnetic alignment, Mn (1+x) Pt (1-x) Sb are ferrimagnetic for all non-zero values of x. We have also synthesized cubic MnPtSb and Mn 1.25 Pt 0.75 Sb alloys using arc melting and annealing. The magnetic properties of these alloys are consistent with our theoretical predictions. Furthermore, these results indicate that the Mn-rich Mn (1+x) Pt (1-x) Sb alloys have potential for spin-transport-based devices.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Orientation and morphology of Pt nanoparticles in γ-alumina processed via ion implantation and thermal annealing

Structure and chemistry of metal/metal-oxide interfaces are critical for many catalytic processes and sensing. Pristine interfaces of Pt and γ-Al 2 O 3 were fabricated using high-energy ion implantation and thermal processing. Amorphous regions of alumina develop in single crystal α-alumina during Pt+ implantation and an 800 °C thermal treatment crystalizes amorphized alumina to γ-Al 2 O 3 and allows Pt ions to precipitate within the developing γ-alumina, yielding Pt nanoparticle tetrahedra terminated by {111} surfaces. The phase of alumina that developed and the distribution, morphology, and orientation of Pt nanoparticles was determined using x-ray diffraction, Rutherford backscattering spectrometry, transmission electron microscopy and scanning transmission electron microscopy.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Single-Atom Pt Boosting Electrochemical Nonenzymatic Glucose Sensing on Ni(OH) 2 /N-Doped Graphene

Conventional nanomaterials in electrochemical non-enzymatic sensing face huge challenge due to their complex size-, surface- and composition- dependent catalytic properties and low active site density. In this work, we designed a single-atom Pt supported on Ni(OH) 2 nanoplates/nitrogen-doped graphene (Pt 1 /Ni(OH) 2 /NG) as the first example for constructing a single-atom catalyst based electrochemical non-enzymatic glucose sensor. The resulting Pt 1 /Ni(OH) 2 /NG exhibited a low anode peak potential of 0.48 V and high sensitivity of 220.75 μA mM -1 cm -2 towards glucose, which are 45 mV lower and 12 times higher than those of Ni(OH) 2 , respectively. The catalyst also showed excellent selectivity for several important interferences, short response time of 4.6 s, and high stability over 4 weeks. Experimental and density functional theory (DFT) calculated results reveal that the improved performance of Pt 1 /Ni(OH) 2 /NG could be attributed to stronger binding strength of glucose on single-atom Pt active centers and their surrounding Ni atoms, combined with fast electron transfer ability by the adding of the highly conductive NG. Finally, this research sheds light on the applications of SACs in the field of electrochemical non-enzymatic sensing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Stereoelectronic Effects in Cl 2 Elimination from Binuclear Pt(III) Complexes

Halogen photoelimination is the critical energy-storing step of metal-catalyzed HX-splitting photocycles. Homo- and heterobimetallic Pt(III) complexes display among the highest quantum efficiencies for halogen elimination reactions. Herein, we examine in detail the mechanism and energetics of halogen elimination from a family of binuclear Pt(III) complexes featuring meridionally coordinated Pt(III) trichlorides. Transient absorption spectroscopy, steady-state photocrystallography, and far-infrared vibrational spectroscopy suggest a halogen elimination mechanism that proceeds via two sequential halogen-atom-extrusion steps. Solution-phase calorimetry experiments of the meridional complexes have defined the thermodynamics of halogen elimination, which show a decrease in the photoelimination quantum efficiency with an increase in the thermochemically defined Pt–X bond strength. Conversely, when compared to an isomeric facial Pt(III) trichloride, a much more efficient photoelimination is observed for the fac isomer than would be predicted based on thermochemistry. Here, this difference in the fac vs mer isomer photochemistry highlights the importance of stereochemistry on halogen elimination efficiency and points to a mechanism-based strategy for achieving halogen elimination reactions that are both efficient and energy storing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Correction to “Self-Consistent Charge Density-Functional Tight-Binding Parameterization for Pt–Ru Alloys”

The valence electron configuration for the Pt atom was incorrectly recorded as 5d86s2 instead of 5d96s1 in the self-consistent charge density-functional tight-binding (DFTB)(1,2) Slater–Koster file for Pt–Pt interactions, which was uploaded as Supporting Information for our original paper.(3) This error occurred only during conversion of the Pt–Pt Hotbit(4,5) file to the DFTB+ format;(6) the tight-binding parametrization was performed entirely in Hotbit with the correct valence electron configuration. Thus, the results and conclusions of our study remain unaffected. Corrected Slater–Koster files are provided as Supporting Information to this erratum.

Shi, Hongbo↗
DOE OSTI2022

Tuning Strong Metal–Support Interaction Kinetics on Pt-Loaded TiO 2 (110) by Choosing the Pressure: A Combined Ultrahigh Vacuum/Near-Ambient Pressure XPS Study

Pt catalyst particles on reducible oxide supports often change their activity significantly at elevated temperatures due to the strong metal–support interaction (SMSI), which induces the formation of an encapsulation layer around the noble metal particles. However, the impact of oxidizing and reducing treatments at elevated pressures on this encapsulation layer remains controversial, partly due to the “pressure gap” between surface science studies and applied catalysis. In the present work, we employ synchrotron-based near-ambient pressure X-ray photoelectron spectroscopy (NAP-XPS) to study the effect of O 2 and H 2 on the SMSI-state of well-defined Pt/TiO 2 (110) catalysts at pressures of up to 0.1 Torr. Further, by tuning the O 2 pressure, we can either selectively oxidize the TiO 2 support or both the support and the Pt particles. Catalyzed by metallic Pt, the encapsulating oxide overlayer grows rapidly in 1 × 10 –5 Torr O 2 , but orders of magnitude less effectively at higher O 2 pressures, where Pt is in an oxidic state. While the oxidation/reduction of Pt particles is reversible, they remain embedded in the support once encapsulation has occurred.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Tuning the Placement of Pt “Single Atoms” on a Mixed CeO 2 –TiO 2 Support

Defect sites on the oxide supports can be used to anchor and activate "single-atoms" catalysts (SACs). By engineering the anchoring sites for supporting SACs, one can alter their electronic and atomic structures which, in turn, define their activity, selectivity, and stability for catalytic reactions. To create and tune unique sites for Pt SACs on CeO 2 support, in this work, we synthesized a system consisting of CeO 2 decorated on TiO 2 nano-oxides for supporting the Pt SACs and investigated the effect of Pt weight loading. Here, a combination of multiple structural characterization methods including diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), X-ray photoelectron spectroscopy (XPS) and X-ray absorption spectroscopy (XAS) were employed to characterize the distribution of charge states of single atoms and evaluate the heterogeneity of their binding sites. We have found that the placement of Pt atoms can be tuned on a mixed oxide surface by changing the weight loading of Pt.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2024

Moiré Patterns in Pt Overlayers on Gold: A Graph Neural Network Interatomic Potential Study

Overlayer structures in bimetallic catalysts are relevant to a variety of catalytic reactions, particularly in electrocatalysis for fuel cell applications. Previous computational studies largely consider these overlayer structures to be those of a pseudomorphic overlayer, where there is a 1:1 atomic ratio between the overlayer and the support metal. Our previous work based on density functional theory (DFT) has shown that there exist nonstoichiometric overlayer structures that are more stable than the stoichiometric ones. Here, in this work, we developed a graph neural network interatomic potential (GNN-IP) to analyze structures formed in Pt overlayers on Au(111). The GNN-IP was used to explore properties of nonstoichiometric overlayers at length scales that are prohibitively expensive to pursue with planewave DFT calculations. In particular, we examined large Pt islands on top of a 48 × 48 Au(111) unit cell to explore the influence of the rotational angle (α) between the Pt overlayer and support Au(111) on both the stability of and the preferred atomic density in the overlayer. Island structures with smaller rotational angles between the Pt overlayer and Au(111) tend to be more stable. Further, smaller rotational angles tend to result in lower atomic density in the Pt overlayer.

chemical structure↗
DOE OSTI2021

Electrochemically Induced Strain Evolution in Pt–Ni Alloy Nanoparticles Observed by Bragg Coherent Diffraction Imaging

Strain is known to enhance the activity of the oxygen reduction reaction in catalytic platinum alloy nanoparticles, whose inactivity is the primary impediment to efficient fuel cells and metal–air batteries. Here, Bragg coherent diffraction imaging (BCDI) was employed to reveal the strain evolution during the voltammetric cycling in Pt–Ni alloy nanoparticles composed of Pt 2 Ni 3 , Pt 1 Ni 1 , and Pt 3 Ni 2 . Analysis of the 3D strain images using a core–shell model shows that the strain as large as 5% is induced on Pt-rich shells due to Ni dissolution. The composition dependency of the strain on the shells is in excellent agreement with that of the catalytic activity. The present study demonstrates that BCDI enables quantitative determination of the strain on alloy nanoparticles during electrochemical reactions, which provides a means to exploit surface strain to design a wide range of electrocatalysts.

36 MATERIALS SCIENCE↗
DOE OSTI2017

High-indexed Pt 3 Ni alloy tetrahexahedral nanoframes evolved through preferential CO etching

Here, chemically controlling crystal structures in nanoscale is challenging, yet provides an effective way to improve catalytic performances. Pt-based nanoframes are a new class of nanomaterials that have great potential as high-performance catalysts. To date, these nanoframes are formed through acid etching in aqueous solutions, which demands long reaction time and often yields ill-defined surface structures. Herein we demonstrate a robust and unprecedented protocol for facile development of high-performance nanoframe catalysts using size and crystallographic facet-controlled PtNi 4 tetrahexahedral nanocrystals prepared through a colloidal synthesis approach as precursors. This new protocol employs the Mond process to preferentially dealloy nickel component in the <100> direction through carbon monoxide etching of carbon-supported PtNi 4 tetrahexahedral nanocrystals at an elevated temperature. The resultant Pt 3 Ni alloy tetrahexahedral nanoframes possess an open, stable, and high-indexed microstructure, containing a segregated Pt thin layer strained to the Pt–Ni alloy surfaces and featuring a down-shift d-band center as revealed by the density functional theory calculations. These nanoframes exhibit much improved catalytic performance, such as high stability under prolonged electrochemical potential cycles, promoting direct electro-oxidation of formic acid to carbon dioxide and enhancing oxygen reduction reaction activities. Because carbon monoxide can be generated from the carbon support through thermal annealing in air, a common process for pretreating supported catalysts, the developed approach can be easily adopted for preparing industrial scale catalysts that are made of Pt–Ni and other alloy nanoframes.

36 MATERIALS SCIENCE↗