Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PROXIMITY EFFECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Experimental Investigation of Rotorcraft Outwash in Ground Effect

The wake characteristics of a rotorcraft are affected by the proximity of a rotor to the ground surface, especially during hover. Ground effect is encountered when the rotor disk is within a distance of a few rotor radii above the ground surface and results in an increase in thrust for a given power relative to that same power condition with the rotor out of ground effect. Although this phenomenon has been highly documented and observed since the beginning of the helicopter age, there is still a relatively little amount of flow-field data existing to help understand its features. Joint Army and NASA testing was conducted at NASA Langley Research Center using a powered rotorcraft model in hover at various rotor heights and thrust conditions in order to contribute to the complete outwash data set. The measured data included outwash velocities and directions, rotor loads, fuselage loads, and ground pressures. The researchers observed a linear relationship between rotor height and percent download on the fuselage, peak mean outwash velocities occurring at radial stations between 1.7 and 1.8 r/R regardless of rotor height, and the measurement azimuthal dependence of the outwash profile for a model incorporating a fuselage. Comparisons to phase-locked PIV data showed similar contours but a more contracted wake boundary for the PIV data. This paper describes the test setup and presents some of the averaged results.

Tanner, Philip E.↗

Band-selective gap opening by a C 4 -symmetric order in a proximity-coupled heterostructure Sr 2 VO 3 FeAs

Significance Heterostructures of correlated electronic systems offer versatile platforms for various types of quantum phases and their transitions. A common wisdom states that the proximity coupling between constituent layers plays a secondary role, because it is much weaker than the intralayer interactions. In this work, we present a counterexample of the belief. Namely, the proximity coupling between localized spins and itinerant electrons stabilizes an exotic electronic state with band-selective gap opening whose observation is done in a correlated heterostructure Sr 2 VO 3 FeAs. Our finding highlights that the proximity coupling can be an effective knob for exotic phases in correlated heterostructures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Casimir Interaction between Plane and Spherical Metallic Surfaces

We give an exact series expansion of the Casimir force between plane and spherical metallic surfaces in the nontrivial situation where the sphere radius R, the plane-sphere distance L and the plasma wavelength {lambda}{sub P} have arbitrary relative values. We then present numerical evaluation of this expansion for not too small values of L/R. For metallic nanospheres where R, L and {lambda}{sub P} have comparable values, we interpret our results in terms of a correlation between the effects of geometry beyond the proximity force approximation and of finite reflectivity due to material properties. We also discuss the interest of our results for the current Casimir experiments which are performed with spheres of large radius R>>L.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Crystal and Electronic Structures of Complex Bismuth Iodides A 3 Bi 2 I 9 ( A = K, Rb, Cs) Related to Perovskite: Aiding the Rational Design of Photovoltaics

Ternary bismuth halides form an interesting functional materials class in the context of the closely related Pb halide perovskite photovoltaics, especially given the significantly reduced toxicity of Bi when compared with Pb. The compounds A 3 Bi 2 I 9 (A = K, Rb, Cs) examined here crystallize in two different structure types: the layered defect-perovskite K 3 Bi 2 I 9 type, and the Cs 3 Cr 2 Cl 9 type. The latter structure type features isolated Bi 2 I 9 3– anions. Here, the crystal structures of the ternary iodides are redetermined and a corrected structural model for Rb 3 Bi 2 I 9 , as established by single crystal X-ray diffraction and solid state 87Rb NMR spectroscopy and supported by density functional theory (DFT) calculations is presented. A variety of facile preparation techniques for single crystals, bulk materials, as well as solution-processed thin films are described. The optical properties and electronic structures are investigated experimentally by optical absorption and ultraviolet photoemission spectroscopy and computationally by DFT calculations. Absolute band positions of the valence and conduction bands of these semiconductors, with excellent agreement of experimental and calculated values, are reported, constituting a useful input for the rational interface design of efficient electronic and optoelectronic devices. The different structural connectivity in the two different structure types, somewhat surprisingly, appears to not impact band positions or band gaps in a significant manner. Computed dielectric properties, including the finding of anomalously large Born effective charge tensors on Bi 3+ , suggest proximal structural instabilities arising from the Bi 3+ 6s 2 lone pair. These anomalous Born effective charges are promising for defect screening and effective charge carrier transport. The structural, electronic, and optical properties of the complex bismuth iodides are to some extent similar to the related lead iodide perovskites. In conclusion, the deeper valence band positions in the complex bismuth iodides point to the need for different choices of hole transport materials for Bi-iodide based solar cell architectures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Taurine protects HK-2 cells from oxidized LDL-induced cytotoxicity via the ROS-mediated mitochondrial and p53-related apoptotic pathways

Oxidized LDL (oxLDL) induces a pro-oxidative environment and promotes apoptosis, causing the progression of renal diseases in humans. Taurine is a semi-essential amino acid in mammals and has been shown to be a potent endogenous antioxidant. The kidney plays a pivotal role in maintaining the balance of taurine. However, the mechanisms underlying the protective effects of taurine against oxLDL-induced injury in renal epithelial cells have not been clarified. In the present study, we investigated the anti-apoptotic effects of taurine on human proximal tubular epithelial (HK-2) cells exposed to oxLDL and explored the related mechanisms. We observed that oxLDL increased the contents of ROS and of malondialdehyde (MDA), which is a lipid peroxidation by-product that acts as an indicator of the cellular oxidation status. In addition, oxLDL induced cell death and apoptosis in HK-2 cells. Pretreatment with taurine at 100 μM significantly attenuated the oxLDL-induced cytotoxicity. We determined that oxLDL triggered the phosphorylation of ERK and, in turn, the activation of p53 and other apoptosis-related events, including calcium accumulation, destabilization of the mitochondrial permeability and disruption of the balance between pro-apoptotic Bax and anti-apoptotic Bcl-2 proteins. The malfunctions induced by oxLDL were effectively blocked by taurine. Thus, our results suggested that taurine exhibits potential therapeutic activity by preventing oxLDL-induced nephrotoxicity. The inhibition of oxLDL-induced epithelial apoptosis by taurine was at least partially due to its anti-oxidant activity and its ability to modulate the ERK and p53 apoptotic pathways. - Highlights: • Oxidized LDL induced cytotoxicity and apoptosis in HK-2 cells. • Pretreatment with taurine attenuated oxLDL-induced nephrotoxicity. • Taurine protected against renal damages through inhibition of ROS generation. • Taurine prevented apoptosis through modulation of the p53 phosphorylation.

60 APPLIED LIFE SCIENCES↗

Effect of Elevated Carbon Dioxide on Nutritional Quality of Tomato

Tomato (Lycopersicon esculentum Mill.) cvs. Red Robin (RR) and Reimann Philipp (RP) were grown hydroponically for 105 d with a 12 h photoperiod, 26 C/22 C thermoperiod, and 500 micromol/ sq m/s PPF at either 400, 1200, 5000, or 10,000 micromol/mol (0.04, 0.12, 0.50, 1.00 kPa) CO2. Harvested fruits were analyzed for proximate composition, total dietary fiber, nitrate, and elemental composition. No trends were apparent with regard to CO2 effects on proximate composition, with fruit from all treatments and both cultivars averiging 18.9 % protein, 3.6 % fat, 10.2 % ash, and 67.2 % carbohydrate. In comparison, average values for field-grown fruit are 16.6 % protein, 3.8 % fat, 8.1 % ash, and 71.5 % carbohydrate (Duke and Atchely, 1986). Total dietary fiber was highest at 10,000 micromol/mol (28.4 % and 22.6 % for RR and RP) and lowest at 1000 micromol/mol (18.2 % and 15.9 % for RR and RP), but showed no overall trend in response to CO2. Nitrate values ranged from 0.19 % to 0.35 % and showed no trend with regard to CO2. K, Mg, and P concentrations showed no trend in response to CO2, but Ca levels increased from 198 and 956 ppm in RR and RP at 400 micromol/mol, to 2537 and 2825 ppm at 10,000 micromol/mol. This increase in Ca caused an increase in fruit Ca/P ratios from 0.07 and 0.37 for RR and RP at 400 micromol/molto 0.99 and 1.23 for RR and RP at 10,000 micromol/mol suggesting that more dietary Ca should be available from high CO2-grown fruit.

Wheeler, R. M.↗

Site Suitability and Hazard Assessment Guide for Small Modular Reactors

Commercial nuclear reactor projects in the U.S. have traditionally employed large light water reactors (LWR) to generate regional supplies of electricity. Although large LWRs have consistently dominated commercial nuclear markets both domestically and abroad, the concept of small modular reactors (SMRs) capable of producing between 30 MW(t) and 900 MW(t) to generating steam for electricity is not new. Nor is the idea of locating small nuclear reactors in close proximity to and in physical connection with industrial processes to provide a long-term source of thermal energy. Growing problems associated continued use of fossil fuels and enhancements in efficiency and safety because of recent advancements in reactor technology suggest that the likelihood of near-term SMR technology(s) deployment at multiple locations within the United States is growing. Many different types of SMR technology are viable for siting in the domestic commercial energy market. However, the potential application of a particular proprietary SMR design will vary according to the target heat end-use application and the site upon which it is proposed to be located. Reactor heat applications most commonly referenced in connection with the SMR market include electric power production, district heating, desalinization, and the supply of thermal energy to various processes that require high temperature over long time periods, or a combination thereof. Indeed, the modular construction, reliability and long operational life purported to be associated with some SMR concepts now being discussed may offer flexibility and benefits no other technology can offer. Effective siting is one of the many early challenges that face a proposed SMR installation project. Site-specific factors dealing with support to facility construction and operation, risks to the plant and the surrounding area, and the consequences subsequent to those risks must be fully identified, analyzed, and possibly mitigated before a license will be granted to construct and operate a nuclear facility. Examples of significant site-related concerns include area geotechnical and geological hazard properties, local climatology and meteorology, water resource availability, the vulnerability of surrounding populations and the environmental to adverse effects in the unlikely event of radionuclide release, the socioeconomic impacts of SMR plant installation and the effects it has on aesthetics, proximity to energy use customers, the topography and area infrastructure that affect plant constructability and security, and concerns related to the transport, installation, operation and decommissioning of major plant components.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Pollen Lipidomics: Lipid Profiling Exposes a Notable Diversity in 22 Allergenic Pollen and Potential Biomarkers of the Allergic Immune Response

Pollen grains are the male gametophytes that deliver sperm cells to female gametophytes during sexual reproduction of higher plants. Pollen is a major source of aeroallergens and environmental antigens. The pollen coat harbors a plethora of lipids that are required for pollen hydration, germination, and penetration of the stigma by pollen tubes. In addition to proteins, pollen displays a wide array of lipids that interact with the human immune system. Prior searches for pollen allergens have focused on the identification of intracellular allergenic proteins, but have largely overlooked much of the extracellular pollen matrix, a region where the majority of lipid molecules reside. Lipid antigens have attracted attention for their potent immunoregulatory effects. By being in close proximity to allergenic proteins on the pollen surface when they interact with host cells, lipids could modify the antigenic properties of proteins. We performed a comparative pollen lipid profiling of 22 commonly allergenic plant species by the use of gas chromatography-mass spectroscopy, followed by detailed data mining and statistical analysis. Three experiments compared pollen lipid profiles. We built a database library of the pollen lipids by matching acquired pollen-lipid mass spectra and retention times with the NIST/EPA/NIH mass-spectral library. We detected, identified, and relatively quantified more than 106 lipid molecular species including fatty acids, n-alkanes, fatty alcohols, and sterols. Pollen derived lipids stimulation up-regulate cytokines expression of dendritic and natural killer T cells co-culture. Here we report on a lipidomic analysis of pollen lipids that can serve as a database for identifying potential lipid antigens and/or novel candidate molecules involved in allergy. The database provides a resource that facilitates studies on the role of lipids in the immunopathogenesis of allergy. Pollen lipids vary greatly among allergenic species and contain many molecules that have stimulatory or regulatory effects on immune responses.

59 BASIC BIOLOGICAL SCIENCES↗

Controlling kinetic and diffusive length-scales during absorptive hydrogen removal in methane dehydroaromatization on MoC x /H-ZSM-5 catalysts

Addition of Zr metal absorbent to MoC x /H-ZSM-5 in the form of staged-bed, stratified-bed, and interpellet physical mixtures effectively scavenges H 2 from catalyst proximity, enhancing maximum single-pass benzene + naphthalene yield during methane dehydroaromatization (DHA) reactions to 14-16% compared to 8% in formulations without zirconium. The coupling of spatially-distinct catalytic and absorptive functions is achieved by dispersive/diffusive transport which conveys H 2 to staged Zr both co- and counter-current to bulk advection, thereby suppressing axial H 2 partial pressure profiles along the catalyst bed and enhancing net aromatization rates. We evince hitherto unreported significance of dispersive hydrogen transport during methane DHA by measurement of Péclet number, Pe = 1.32, in H 2 tracer studies with step-change or impulse input to inert catalyst proxies. Kinetic limits to methane pyrolysis are quantified by Damköhler number, Da, for synthesis of benzene, Da B = 0.15, and naphthalene, Da N = 0.03, determined from kinetic studies which rigorously account for reversibility of DHA reactions. Here, detailed reaction-transport models synthesize interplay of kinetic, diffusive, and convective length-scales captured by Péclet and Damköhler number to predict influence of catalyst-absorbent proximity and process flow-conditions on aromatization rates. Systematic control of catalyst bed-length, L, or linear flow velocity, u, predictably alters Pe and Da to effect improvements in methane conversion with and without Zr metal, corroborating results from simulation of the reaction-transport model.

03 NATURAL GAS↗

Over-Water Aspects of Ground-Effect Vehicles

The large thrust augmentation obtainable with annular-jet configurations in ground proximity has led to the serious investigation of ground-effect machines. The basic theoretical work on these phenomena has been done by Chaplin and Boehler. Large thrust-augmentation factors, however, can be obtained only at very low heights, that is, of the order of a few percent of the diameter of the vehicle. To take advantage of this thrust augmentation therefore the vehicle must be either very large or must operate over very smooth terrain. Over-land uses of these vehicles then will probably be rather limited. The water, however, is inherently smooth and those irregularities that do exist, that is waves, are statistically known. It appears therefore that some practical application of ground-effect machines may be made in over-water application.

Kuhn, Richard E.↗

A methodology for automation and robotics evaluation applied to the space station telerobotic servicer

The efforts of a recent study aimed at identifying key issues and trade-offs associated with using a Flight Telerobotic Servicer (FTS) to aid in Space Station assembly-phase tasks is described. The use of automation and robotic (A and R) technologies for large space systems would involve a substitution of automation capabilities for human extravehicular or intravehicular activities (EVA, IVA). A methodology is presented that incorporates assessment of candidate assembly-phase tasks, telerobotic performance capabilities, development costs, and effect of operational constraints (space transportation system (STS), attached payload, and proximity operations). Changes in the region of cost-effectiveness are examined under a variety of systems design assumptions. A discussion of issues is presented with focus on three roles the FTS might serve: (1) as a research-oriented testbed to learn more about space usage of telerobotics; (2) as a research based testbed having an experimental demonstration orientation with limited assembly and servicing applications; or (3) as an operational system to augment EVA and to aid the construction of the Space Station and to reduce the programmatic (schedule) risk by increasing the flexibility of mission operations.

Smith, Jeffrey H.↗

Ground effects on V/STOL and STOL aircraft - A survey

The flow fields encountered by jet- and fan-powered Vertical/Short Takeoff and Landing (V/STOL) aircraft operating in ground effect are reviewed and their general effects on the aerodynamic characteristics are discussed. The ground effects considered include (1) the suckdown experienced by a single jet configuration in hover, (2) the fountain flow and additional suckdown experienced by multiple jet configurations in hover, (3) the ground vortex generated by jet and jet flap configurations in Short Takeoff and Landing (STOL) operation and the associated aerodynamic and hot-gas-ingestion effects, and (4) the change in the downwash at the tail due to ground proximity. After over 30 years of research on V/STOL aircraft, the general flow phenomena are well known and, in most areas, the effects of ground proximity can be estimated or can be determined experimentally. However, there are some anomalies in the current data base which are discussed.

Eshlemen, J.↗

Transition Metal Dichalcogenides: Making Atomic‐Level Magnetism Tunable with Light at Room Temperature

Abstract The capacity to manipulate magnetization in 2D dilute magnetic semiconductors (2D‐DMSs) using light, specifically in magnetically doped transition metal dichalcogenide (TMD) monolayers ( M ‐doped TX 2 , where M = V, Fe, and Cr; T = W, Mo; X = S, Se, and Te), may lead to innovative applications in spintronics, spin‐caloritronics, valleytronics, and quantum computation. This Perspective paper explores the mediation of magnetization by light under ambient conditions in 2D‐TMD DMSs and heterostructures. By combining magneto‐LC resonance (MLCR) experiments with density functional theory (DFT) calculations, we show that the magnetization can be enhanced using light in V‐doped TMD monolayers (e.g., V‐WS 2 , V‐WSe 2 ). This phenomenon is attributed to excess holes in the conduction and valence bands, and carriers trapped in magnetic doping states, mediating the magnetization of the semiconducting layer. In 2D‐TMD heterostructures (VSe 2 /WS 2 , VSe 2 /MoS 2 ), the significance of proximity, charge‐transfer, and confinement effects in amplifying light‐mediated magnetism is demonstrated. We attributed this to photon absorption at the TMD layer that generates electron–hole pairs mediating the magnetization of the heterostructure. These findings will encourage further research in the field of 2D magnetism and establish a novel design of 2D‐TMDs and heterostructures with optically tunable magnetic functionalities, paving the way for next‐generation magneto‐optic nanodevices.

36 MATERIALS SCIENCE↗

Calcitonin Receptor N-Glycosylation Enhances Peptide Hormone Affinity by Controlling Receptor Dynamics

The class B G protein-coupled receptor (GPCR) calcitonin receptor (CTR) is a drug target for osteoporosis and diabetes. N-glycosylation of asparagine 130 in its extracellular domain (ECD) enhances calcitonin hormone affinity with the proximal GlcNAc residue mediating this effect through an unknown mechanism. Here, we present two crystal structures of salmon calcitonin-bound, GlcNAc-bearing CTR ECD at 1.78 and 2.85 Å resolutions and analyze the mechanism of the glycan effect. The N130 GlcNAc does not contact the hormone. Surprisingly, the structures are nearly identical to a structure of hormone-bound, N-glycan-free ECD, which suggested that the GlcNAc might affect CTR dynamics not observed in the static crystallographic snapshots. Hydrogen-deuterium exchange mass spectrometry and molecular dynamics simulations revealed that glycosylation stabilized a β-sheet adjacent to the N130 GlcNAc and the N-terminal α-helix near the peptide-binding site while increasing flexibility of the peptide-binding site turret loop. These changes due to N-glycosylation increased the ligand on-rate and decreased its off-rate. The glycan effect extended to RAMP-CTR amylin receptor complexes and was also conserved in the related CGRP receptor. These results reveal that N-glycosylation can modulate GPCR function by altering receptor dynamics.

59 BASIC BIOLOGICAL SCIENCES↗

Bridge Connectivity Dictates Spin Interactions and Triplet Pair Dynamics in Intramolecular Singlet Fission

Electron spin plays a critical role in determining the structure, dynamics, and reactivities of molecular excited states, including multiexciton processes such as singlet fission. These systems exhibit triplet pair states whose excited state dynamics can be widely tuned through molecular engineering. For example, the electronic coupling between covalently linked chromophores can be readily modulated using chemical bridges to control proximity, quantum interference, or resonance effects. However, less is known about how spin coupling interactions are impacted by chromophore architecture, and how this influences triplet pair recombination dynamics. Here, in this study, we investigate the role of bridge connectivity and chromophore identity in modulating interchromophore exchange and dipolar coupling interactions for a series of pentacene and tetracene dimers bridged by alternant hydrocarbons (phenylene, naphthalene, anthracene). Using both time-resolved electron paramagnetic resonance and transient absorption spectroscopy, we find that the boundedness and recombination pathways of the triplet pair spins are highly sensitive to molecular architecture and chromophore-specific magnetic dipolar interactions. Notably, nominally ferromagnetic and antiferromagnetic eigenstates result in distinct spin state orderings, consistent with predictions from quantum interference-based graphical models. These findings establish new design principles for tuning spin dynamics in iSF materials, with implications for photonic and quantum information applications.

He, Guiying [City Univ. of New York (CUNY), NY (Un↗

Modeling Microwave-Enhanced Chemical Vapor Infiltration Process for Preventing Premature Pore Closure

The chemical vapor infiltration (CVI) process involves infiltrating a porous preform with reacting gases that undergo chemical transformation at high temperatures to deposit the ceramic phase within the pores, ultimately leading to a dense composite. The conventional CVI process in composite manufacturing needs to follow an isothermal approach to minimize temperature differences between the external and internal surfaces of the preform, ensuring that reactive gases infiltrate internal pores before external surfaces seal. Here, this study addresses the challenge of premature pore closure in CVI processes through microwave heating. A frequency-domain microwave solver is developed in OpenFOAM to investigate volumetric heating mechanisms within the preform. Through numerical studies, we demonstrate the capability of microwave heating of creating an inside-out temperature inversion. This inversion accelerates reactions proximal to the preform center, effectively mitigating the risk of premature external pore closure and ensuring uniform densification. The results reveal a significant enhancement in temperature inversion when high-permittivity reflectors are incorporated to generate resonant waves. This microwave heating strategy is then coupled with high-fidelity direct numerical simulation (DNS) of reacting flow, enabling the analysis of resulting densification processes. The DNS includes detailed chemistry and realistic diffusion coefficients. The numerical results can be used to estimate the impact of microwave-induced temperature inversion on densification in productions.

42 ENGINEERING↗

Modeling Microwave-Enhanced Chemical Vapor Infiltration Process for Preventing Premature Pore Closure

The chemical vapor infiltration (CVI) process involves infiltrating a porous preform with reacting gases that undergo chemical transformation at high temperatures to deposit the ceramic phase within the pores, ultimately leading to a dense composite. The conventional CVI process in composite manufacturing needs to follow an isothermal approach to minimize temperature differences between the external and internal surfaces of the preform, ensuring that reactive gases infiltrate internal pores before external surfaces seal. This study addresses the challenge of premature pore closure in CVI processes through microwave heating. A frequency-domain microwave solver is developed in Open-FOAM to investigate volumetric heating mechanisms within the preform. Through numerical studies, we demonstrate the capability of microwave heating of creating an inside-out temperature inversion. This inversion accelerates reactions proximal to the preform center, effectively mitigating the risk of premature external pore closure and ensuring uniform densification. The results reveal a significant enhancement in temperature inversion when high-permittivity reflectors are incorporated to generate resonant waves. This microwave heating strategy is then coupled with high-fidelity direct numerical simulation (DNS) of reacting flow, enabling the analysis of resulting densification processes. The DNS simulation includes detailed chemistry and realistic diffusion coefficients. The numerical results can be used to estimate the impact of microwave-induced temperature inversion on densification in productions.

Ge, Wenjun↗

Experiments on confined turbulent jets in cross flow.

Results are reported of experiments on the effects of an opposite wall on the characteristics of turbulent jets injected into a cross flow, for unheated and heated jets. Longitudinal and transverse distributions of velocity and temperature are presented for single and multiple circular jets, and trajectories are presented for two-domensional jets. The opposite wall has relatively little effect on a single jet unless the ratio of jet to cross flow momentum flux is large enough for the jet to impinge on the opposite wall. For a row of jets aligned perpendicularly to the cross flow, the opposite wall exerts progressively larger influence as the spacing between jets decreases. Much of the effect of jet and wall proximity can be understood by considering the interaction of the vortex flow which is the major feature of the structure of a single jet in a cross flow. Smoke photographs are shown to elucidate some of the interaction patterns.

Kamotani, Y.↗