Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PH VALUE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Iron-sulfide redox flow batteries

Iron-sulfide redox flow battery (RFB) systems can be advantageous for energy storage, particularly when the electrolytes have pH values greater than 6. Such systems can exhibit excellent energy conversion efficiency and stability and can utilize low-cost materials that are relatively safer and more environmentally friendly. One example of an iron-sulfide RFB is characterized by a positive electrolyte that comprises Fe(III) and/or Fe(II) in a positive electrolyte supporting solution, a negative electrolyte that comprises S.sup.2- and/or S in a negative electrolyte supporting solution, and a membrane, or a separator, that separates the positive electrolyte and electrode from the negative electrolyte and electrode.

25 ENERGY STORAGE↗

Iron-sulfide redox flow batteries

Iron-sulfide redox flow battery (RFB) systems can be advantageous for energy storage, particularly when the electrolytes have pH values greater than 6. Such systems can exhibit excellent energy conversion efficiency and stability and can utilize low-cost materials that are relatively safer and more environmentally friendly. One example of an iron-sulfide RFB is characterized by a positive electrolyte that comprises Fe(III) and/or Fe(II) in a positive electrolyte supporting solution, a negative electrolyte that comprises S.sup.2- and/or S in a negative electrolyte supporting solution, and a membrane, or a separator, that separates the positive electrolyte and electrode from the negative electrolyte and electrode.

25 ENERGY STORAGE↗

On the Versatility of Rheoreversible, Stimuli-responsive Hydraulic-Fracturing Fluids for Enhanced Geothermal Systems: Effect of Reservoir pH

Abstract The primary challenge for the feasibility of enhanced geothermal systems (EGS) is to cost-effectively create high-permeability reservoirs inside deep crystalline bedrock. Although fracturing fluids are commonly used for oil/gas, standard fracturing methods are not developed or proven for EGS temperatures and pressures. Furthermore, the environmental impacts of currently used fracturing methods are only recently being determined. These authors recently reported an environmentally benign, CO2-activated, rheoreversible fracturing fluid that enhances permeability through fracturing due to in situ volume expansion and gel formation. The potential of this novel fracturing fluid is evaluated in this work towards its application at geothermal sites under different pH conditions. Laboratory-scale fracturing experiments using Coso Geothermal rock cores under different pH environments were performed followed by X-ray microtomography characterization. The results demonstrate that CO2-reactive aqueous solutions of environmentally amenable polyallylamine (PAA) consistently and reproducibly creates/propagates fracture networks through highly impermeable crystalline rock from Coso EGS sites at considerably lower effective stress as compared to conventional fracturing fluids. In addition, permeability was significantly enhanced in a wide range of formation-water pH values. This effective, and environmentally-friendly fracturing fluid technology represents a potential alternative to conventional fracturing fluids.

CO2-reactive↗

On the Versatility of Rheoreversible, Stimuli-responsive Hydraulic-Fracturing Fluids for Enhanced Geothermal Systems: Effect of Reservoir pH

Abstract The primary challenge for the feasibility of enhanced geothermal systems (EGS) is to cost-effectively create high-permeability reservoirs inside deep crystalline bedrock. Although fracturing fluids are commonly used for oil/gas, standard fracturing methods are not developed or proven for EGS temperatures and pressures. Furthermore, the environmental impacts of currently used fracturing methods are only recently being determined. These authors recently reported an environmentally benign, CO2-activated, rheoreversible fracturing fluid that enhances permeability through fracturing due to in situ volume expansion and gel formation. The potential of this novel fracturing fluid is evaluated in this work towards its application at geothermal sites under different pH conditions. Laboratory-scale fracturing experiments using Coso Geothermal rock cores under different pH environments were performed followed by X-ray microtomography characterization. The results demonstrate that CO2-reactive aqueous solutions of environmentally amenable polyallylamine (PAA) consistently and reproducibly creates/propagates fracture networks through highly impermeable crystalline rock from Coso EGS sites at considerably lower effective stress as compared to conventional fracturing fluids. In addition, permeability was significantly enhanced in a wide range of formation-water pH values. This effective, and environmentally-friendly fracturing fluid technology represents a potential alternative to conventional fracturing fluids.

geothermal, reservoirs, crystalline, fracturing, o↗

Synthesis and textural evolution of alumina particles with mesoporous structures

Alumina particles with mesostructures were synthesized through a chemical precipitation method by using different inorganic aluminum salts followed by a heterogeneous azeotropic distillation and calcination process. The obtained mesoporous {gamma}-alumina particles were systematically characterized by the X-ray diffraction, transmission electron microscopy and nitrogen adsorption-desorption measurement. Effects of the aluminum salt counter anion, pH value and the azeotropic distillation process on the structural or textural evolution of alumina particles were investigated. It is found that Cl{sup -} in the reaction solution can restrain the textural evolution of the resultant precipitates into two-dimensional crystallized pseudoboehmite lamellae during the heterogeneous azeotropic distillation, and then transformed into {gamma}-Al{sub 2}O{sub 3} particles with mesostructures after further calcination at 1173 K, whereas coexisting SO{sub 4}{sup 2-} can promote above morphology evolution and then transformed into {gamma}-Al{sub 2}O{sub 3} nanofibers after calcination at 1173 K. Moreover nearly all materials retain relatively high specific surface areas larger than 100 m{sup 2} g{sup -1} even after calcinations at 1173 K. - Graphical abstract: Co-existing Cl{sup -} is beneficial for the formation of {gamma}-alumina nanoparticles with mesostructures during the precipitation process. Interparticle and intraparticle mesopores can be derived from acidic solution and near neutral solution, respectively.

36 MATERIALS SCIENCE↗

Iodide Sorption to Clays and the Relationship to Surface Charge and Clay Texture - 12356

Iodine is assumed to behave conservatively in clay barriers around nuclear waste repositories and in natural sediments. Batch experiments tend to show little to no sorption, while in column experiments iodine is often retarded relative to tritiated water. Current surface complexation theory cannot account for negatively charged ion sorption to a negatively charged clay particle. Surface protonation and iodide sorption to clay minerals were examined using surface titrations and batch sorption experiments with a suite of clay minerals. Surface titrations were completed spanning a range of both pH values and ionic strengths. For reference, similar titrations were performed on pure forms of an Al-O powder. The titration curves were deconvoluted to attain the pKa distribution for each material at each ionic strength. The pKa distribution for the Al-O shows two distinct peaks at 4.8 and 7.5, which are invariant with ionic strength. The pKa distribution of clays was highly variable between the different minerals and as a function of ionic strength. Iodide sorption experiments were completed at high solid:solution ratios to exacerbate sorption properties. Palygorskite and kaolinite had the highest amount of iodide sorption and montmorillonite had the least. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Removal of U(VI) in the Alkaline Conditions Created by NH{sub 3} Gas - 17288

Injection of ammonia (NH{sub 3}) gas in the unsaturated zone is an innovative technology to mitigate uranium contamination in the presence of oxygenated, high-carbonate, alkaline soil, and pore water composition typical for the Hanford Site. A uranium-contaminated plume is a potential source for groundwater pollution due to migration of soluble uranium species towards the water table. This study evaluates the effect of various pore water constituents such as Ca, Al, Si and bicarbonate ions on changes in uranium concentrations in alkaline conditions, created by the injection of NH{sub 3} gas to be used to effectively mitigate uranium contamination in the vadose zone sediments. The main target in this research was the speciation modeling calculations conducted via the Geochemist Workbench (GWB) software. For this purpose, the GWB's database was updated with the most recently published U thermodynamic data on dissolution reactions and revised stability and solubility product constants. The simulations were carried out for varied pore water compositions with 5% of NH{sub 3}(g) to increase the initial pore water pH from 8.0 to 11.87. The model assumed the system is closed to the atmosphere; so, no exchange of CO{sub 2} with the atmosphere. The predicted U(VI) aqueous species and saturation indices [SI= log(IAP/Ksp)] were plotted as a function of pH values. The aqueous uranium carbonate species, UO{sub 2}(CO{sub 3}){sub 2}{sup 4-} and UO{sub 2}(CO{sub 3}){sub 2}{sup 2-}, were more abundant in the absence of Ca{sup 2+} and at a low bicarbonate concentration. In pore water compositions containing Ca{sup 2+} and HCO{sub 3}{sup -}, the major predicted aqueous species were Ca{sub 2}UO{sub 2}(CO{sub 3}){sub 3}{sup 0}, CaUO{sub 2}(CO{sub 3}){sub 2}, and UO{sub 2}(CO{sub 3}){sub 3}{sup -4}. Also, the speciation modeling predicted the formation of boltwoodite [Na,K(H{sub 3}O) UO{sub 2}(SiO{sub 4})], uranophane [Ca(UO{sub 2}){sub 2}(HSiO{sub 4}){sub 2} 5H{sub 2}O], and grimselite [NaK{sub 3}UO{sub 2}(CO{sub 3})3.H{sub 2}O] minerals. The computed saturation indices (SI) indicated saturation of boltwoodite minerals in the simulated Ca-free compositions at zero and low (0 and 2.9 mM) HCO{sub 3}{sup -} concentrations. In the presence of Ca ions, 5 mM and 10 mM, and similar HCO{sub 3}{sup -} concentrations, speciation modeling predicted the formation of uranophane. However, grimselite phase was prevailing when simulated solutions contained Ca{sup 2+} ions and higher bicarbonate concentrations of 50 mM. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Iron Behavior in Microcosms Simulating Bioreduction in Savannah River Site Sediments - 17389

An estimated 1.8 billion gallons of acidic low-activity waste solutions originating from the processing of uranium slugs and irradiated fuel at separation facilities at the Savannah River Site (SRS) were discharged to the unlined seepage basins located in the F/H-area. The acidic solutions of the basin influent (pH from 3.2 to 5.5) contaminated with a variety of radionuclides and dissolved metals caused groundwater contamination. In 2010, DOE funded a demonstration of the Enhanced Anaerobic Reductive Precipitation (EARP) process at the SRS F-Area that consisted of in-situ injections of a carbohydrate substrate to establish anaerobic reactive zones for metal and radionuclide remediation. The addition of the molasses substrate solution to groundwater was done to produce anaerobic conditions conducive to uranium reduction and then precipitation as uranium (IV). The SRS soil is highly weathered and features very low natural alkalinity. A microcosm study, prepared with sieved SRS sediments and augmented with a solution mixture containing molasses and sulfate, was designed to provide evidence of the capabilities of this remediation technology under SRS environmental conditions. The objective of these microcosm experiments was to replicate the anaerobic conditions created as a result of injections of molasses combined with sulfate ions, similar to the EARP process that was performed at SRS, and investigate if any mineralogical changes could occur in the soil due to the addition of molasses. Specifically, the study aimed to determine if solid phases of reduced iron such as siderite and pyrite would be formed, as this would indicate the potential to form a long-lasting bioreductive zone. An understanding of this technology will be useful in determining if it is a viable option for remediation. In the experiments, the media solution was amended with molasses and sulfate to stimulate sulfate-reducing bacteria. Sulfate reduction occurs extensively under the redox conditions occurring after iron reduction and before methanogenic conditions. These conditions are considered the second most reducing condition in natural groundwater systems. Microcosm tubes prepared in triplicate were kept inside an anaerobic glove box, which was continuously monitored to ensure that conditions remained anaerobic. The initial X-ray diffraction (XRD) analyses on the background sediment samples indicated the presence of quartz, kaolinite, montmorillonite, and goethite. In the molasses-treated samples there were no visible peaks for reduced forms of iron such as siderite and pyrite. The pH measurements suggest that all samples in either batch, including those that were brought to a neutral pH before the addition of the sediments, have followed a similar trend with a decline in the pH value to between 4 and 4.7. This can be attributed to the fermentation of molasses and the natural acidity of the SRS sediments used for the microcosm study. In the acidic iron-rich sediment, the microbial reduction of Fe (III) was the predominant electron-accepting process for oxidation of the organic substrate. The maximum iron concentration detected during the experiments was 13 mg/L. Analytical results showed that there was no sulfate reduction in any of the samples augmented with sulfate and the concentration remained level at 500 ppm as originally added to the initial solutions (518 - 542 mg/L). This is consistent with the absence of any indication of iron sulfide formation. Under the experimental conditions in these microcosms, the abundance of biologically available Fe (III) allows Fe (III)-reducers to out-compete sulfate-reducing bacteria using molasses as an electron donor. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Development of Treatment Process for Radioactive Wastewater Generated from Molybdenum-99 Study - 16415

Molybdenum-99 (Mo-99) high acidic waste solution was securely stored at INER for numerous years. Until 2004, the procedures of waste solution draw-out and pressure-release were accompanied, along with construction of treatment facilities. In 2009, after simulated solution and small volume Mo-99 waste solution tests, the treatment procedure was determined. Then batch-scale treatment facilities were set up. The waste solution was preserved using the instrument, along with modification of some facilities simultaneously. Ultimately all of 12 tanks of Mo-99 inorganic waste solution stored in Building 014 were finished on July, 2012. And residential 5 tanks of those solution served in Building 015B were also completed on September, 2014. A practicable process has been developed for treating radioactive waste generated from Mo-99 study, and it can effectively remove radionuclides from a nitric acid solution. At first, after the waste was sucked from the bucket, the pH value was adjusted to about 10.0 through acid-alkali neutralization. Then, an adsorbent of natural zeolite powder was added to adsorb nuclides, and two adsorption columns filled with Cs-treat and Sr-treat adsorbents were used for removing nuclear species of Cs-137 and Sr-90. In this step, the nuclear species of Cs-137 and Sr-90 contained in the liquid waste are significantly reduced to a degree for manual operation allowable. Then, nitrate ion and mercury ion were removed through another procedure. As a result, the operations were safer and more efficient than other conventional methods. Additionally, the hazard of accidental leakage caused by corrosion of the bucket after long period of storage can be effectively prevented and potential pollution threats are also eliminated. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Feasibility Study for Cathodic Protection of Waste Tanks at Hanford

The Hanford Nuclear Reservation site contains approximately 211 million liters of radioactive and chemically hazardous waste arising from nuclear weapons production, beginning with World War II, and continuing through the Cold War. The waste is stored in 177 carbon-steel underground storage tanks, of which 149 are single-shell tanks (SSTs) and the remaining are double-shell tanks (DSTs). The mission of an ongoing River Protection Project is to retrieve the waste from the underground storage tanks and then treat and immobilize (i.e., vitrify) it for disposal. Waste from the older SSTs is being progressively retrieved into the newer DSTs for storage pending treatment, immobilization, and disposal. Waste chemistry controls are in place to mitigate general corrosion, pitting corrosion, and stress corrosion cracking (SCC) and minimize corrosion risks to the carbon steel tank liners of DST at the Hanford Site. The chemistry control program focuses on preserving liner integrity while balancing the need for caustic/nitrite additions that have large downstream impacts on vitrification. Some of the DSTs store salt cake or sludge waste layers contain out-of-specification interstitial liquids that contact the primary tank bottom or sidewall. Remediation of such layers through chemical additions is not practical. At the present time, the most significant leak integrity concern at Hanford is for corrosion of the tank bottoms of DSTs where the solids layer is out of specification because of hydroxide ion depletion and consequently, pH values that are less than 12. Cathodic protection (CP) has been proposed as a possible way to protect the liners of such tanks against corrosion. The objective of this project was to investigate the feasibility of applying CP to Hanford DSTs to mitigate internal corrosion of the carbon steel tank primary liners. The scope of the project included (1) a literature review on the application of CP to storage tank systems, in general, and to waste tanks at the Savannah River Site (SRS) and Hanford, (2) a review of the finite element analysis (FEA) model recently developed to evaluate potentials for a DST, and (3) the development of a boundary element analysis (BEA) model for CP for a DST. Tank AN-107, one of the Hanford DSTs, was selected for this work because (1) the bottommost waste layer in the tank is out-of-specification, and (2) electrochemical and resistivity data, based on recent waste sampling and testing, are available for this tank. The overarching conclusion of this study is that, based on the available information, it is feasible to apply CP to mitigate internal corrosion of the primary liners of the Hanford DSTs. However, significant additional information and work are required before a CP system can be designed. Recommendations for next steps in the design of the CP system will be presented.

WIERSMA, BRUCE↗

Surface Complexation Modeling of Uranium(Vi) Sorbed Onto Zirconium Oxophosphate Versus Temperature: Thermodynamic And Structural Approaches

This work presents an investigation of the interaction mechanisms between uranyl ions and a solid phosphate, the zirconium oxophosphate: Zr{sub 2}O(PO{sub 4}){sub 2}. Both thermodynamic and structural points of view are developed. Indeed, prior to any simulation of the retention data, it is necessary to precisely characterize the system under study in order to gain information at a molecular scale. First, the intrinsic surface properties of this synthetic compound have been investigated for different temperatures ranging from 25 to 90 C. Mass and potentiometric titrations show that the surface site density remains constant between 25 and 90 C, while the experimental point of zero charge slightly decreases from 4.8 to 4.5 with an increasing temperature. The potentiometric titration data are simulated, for each temperature, using the constant capacitance model and taking into account two surface sites ({triple_bond}Zr{_}O and {triple_bond}P{_}O) with a total surface site density equal to 7.0 sites nm{sup -2}. For both reactive sites, the intrinsic protonation constants do not change with the temperature, while the deprotonation ones increase. These results led to the determination of the associated enthalpy and entropy changes according to the van't Hoff relation. Second, the speciation of U(VI) at the solid/solution interface has been studied using two complementary spectroscopic techniques probing the sorbed uranyl ions: time-resolved laser-induced fluorescence spectroscopy (TRLFS) and X-ray absorption spectroscopy (EXAFS). The substrate presents two different reactive surface sites against uranium retention, which are constituted by the oxygen atoms of the surface PO{sub 4} groups and the oxygen atoms linked to the zirconium atoms. Two inner-sphere complexes are thus present on the substrate, their relative proportion depending on the pH value of the suspension. The effects of the temperature (25-90 C) on the surrounding uranium were checked using the TRLFS technique. The uranyl sorption constants onto the Zr{sub 2}O(PO{sub 4}){sub 2} substrate were determined taking into account the structural investigation. The surface complexation modeling was performed using the constant capacitance model included in the FITEQLv4.0 code. The four adsorption edges obtained at 25, 50, 75, and 90 C were simulated. The modeling of these experimental data was realized considering two surface complexes (({triple_bond}ZrOH){sub 2}UO{sup 2+}{sub 2}, ({triple_bond}PO){sub 2}UO{sub 2}) according to the structural investigation. The constant value associated with the {triple_bond}ZrO site does not change with the temperature, while the one corresponding to the {triple_bond}PO site increases. Finally, the enthalpy and entropy changes associated with the uranyl sorption constants have been determined using the van't Hoff relation.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

POTENTIAL USE OF ACTIVATED CARBON TO RECOVER TC-99 FROM 200 WEST AREA GROUNDWATER AS AN ALTERNATIVE TO MORE EXPENSIVE RESINS HANFORD SITE RICHLAND WASNINGTON

Recent treatability testing performed on groundwater at the 200-ZP-1 Operable Unit at the Hanford Site in Richland, Washington, has shown that Purolite{reg_sign} A530E resin very effectively removes Tc-99 from groundwater. However, this resin is expensive and cannot be regenerated. In an effort to find a less expensive method for removing Tc-99 from the groundwater, a literature search was performed. The results indicated that activated carbon may be used to recover technetium (as pertechnetate, TCO{sub 4}{sup -}) from groundwater. Oak Ridge National Laboratory used activated carbon in both batch adsorption and column leaching studies. The adsorption study concluded that activated carbon absorbs TCO{sub 4}{sup -} selectively and effectively over a wide range of pH values and from various dilute electrolyte solutions (< 0.01 molarity). The column leaching studies confirmed a high adsorption capacity and selectivity of activated carbon for TCO{sub 4}{sup -}. Since activated carbon is much less expensive than Purolite A530E resin, it has been determined that a more extensive literature search is warranted to determine if recent studies have reached similar conclusions, and, if so, pilot testing of 200-ZP-1 groundwater wi11 likely be implemented. It is possible that less expensive, activated carbon canisters could be used as pre-filters to remove Tc-99, followed by the use of the more expensive Purolite A530E resin as a polishing step.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Silicate species of water glass and insights for alkali-activated green cement

Despite that sodium silicate solutions of high pH are commonly used in industrial applications, most investigations are focused on low to medium values of pH. Therefore we have investigated such solutions in a broad modulus range and up to high pH values (∼14) by use of infrared (IR) spectroscopy and silicon nuclear magnetic resonance ({sup 29}Si-NMR). The results show that the modulus dependent pH value leads to more or less charged species, which affects the configurations of the silicate units. This in turn, influences the alkali-activation process of low CO{sub 2} footprint cements, i.e. materials based on industrial waste or by-products.

36 MATERIALS SCIENCE↗

Proteome-wide analysis of protein stability in Escherichia coli under acid stress

Knowledge of protein acid sensitivity remains sparse and is largely derived from low-throughput, enzyme-specific assays. We used a scalable framework to map acid stability across the Escherichia coli proteome to assess the acid stability of 1,675 unique proteins, estimating pH 50 values for over 90% of them. The parameter pH50 was defined as the pH value at which only 50% of the initial protein remains in solution following acid treatment. Proteome-wide pH 50 values ranged from 2.28 to 6.33 (median 5.11). Approximately 9% of detected proteins remained stable across all tested pH conditions. Our results align with published data and the assay of citrate synthase (GltA) performed here. Protein acid stability differed significantly by subcellular localization: periplasmic proteins were relatively more abundant in the acid-stable group, cytoplasmic proteins were abundant at pH 50 values 4.5–5.5, and inner membrane proteins at higher pH 50 between 5.5 and 6.0. Outer membrane proteins were too few to draw strong conclusions regarding enrichment within specific pH 50 groups. Notably, the periplasmic binding protein of the molybdate ABC transporter (ModA), was enriched after incubation at low pH. Estimated pH 50 values showed no correlation with protein isoelectric point and molecular weight. Together, this work provides the first proteome-wide map of protein acid stability and establishes a general framework for studying different chemical stressors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

ESTIMATED NEPTUNIUM SEDIMENT SORPTION VALUES AS A FUNCTION OF PH AND MEASURED BARIUM AND RADIUM KD VALUES

The objective of this document is to provide traceability and justification for a select few new geochemical data used in the Special Analysis entitled 'Special Analysis for the Dose Assessment of the Final Inventories in Center Slit Trenches One through Five'. Most values used in the Special Analysis came from the traditional geochemical data package, however, some recent laboratory measurements have made it possible to estimate barium K{sub d} values. Additionally, some recent calculations were made to estimate neptunium K{sub d} values as a function of pH. The assumptions, justifications, and calculations needed to generate these new values are presented in this document, and the values are summarized.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Removal of malachite green dye from aqueous solution using mesoporous silica synthesized from 1-octyl-3-methylimidazolium chloride ionic liquid

In this research, mesoporous silica was synthesized via a modified sol-gel route using 1-octyl-3-methylimidazolium chloride and was employed to remove malachite green (MG) dye from aqueous solution. Subsequently, this material was characterized and identified by different techniques such as Fourier transform infrared spectroscopy (FT-IR), N{sub 2} adsorption-desorption method, scanning electron microscopy (SEM), and thermosgravimetric analysis (TGA). Unique properties such as high surface area and pore diameter, in addition to highly reactive atoms and presence of various functional groups make the mesoporous silica possible for efficient removal of malachite green (MG). In batch experimental set-up, optimum conditions for quantitative removal of MG by mesoporous silica was attained by varying different variables such as adsorbent dosage, initial dye concentration, contact time, and pH. Optimum values were set as pH of 8.0, 0.5 g of adsorbent at contact time of 120 min. The adsorption of MG follows the pseudo-second-order rate equation. Equilibrium data fitted well with the Freundlich model at all amount of adsorbent, while maximum adsorption capacity was 5.981 mg g{sup −}1 for 0.5 g mesoporous silica synthesized in IL.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The influence of solution-precursors on optical properties of In{sub 2}S{sub 3} films deposited by successive ionic layer adsorption and reaction

The method of ion lamination from aqueous solutions of various compositions is used to form In{sub 2}S{sub 3} films on the surface of TiO{sub 2} and porous anodic Al{sub 2}O{sub 3}. It is established that the composition of the cationic and anionic solution-precursors affects the films' optical band gap, which varies in the range 1.97-2.65 eV. This is accounted for in the context of variation in the content of oxygen in In{sub 2}S{sub 3}. The observed dependences of optical properties on the value of the pH for anionic precursors and on the nature of the anion in cationic precursors are in good agreement with calculated conditions for chemical equilibrium in the studied systems. The dependence of the efficiency of photoelectric conversion in solar cells with ultrathin absorbing layers on the content of oxygen in the In{sub 2}S{sub 3} films obtained by ionic lamination is demonstrated.

36 MATERIALS SCIENCE↗

Effect of pH on particles size and gas sensing properties of In{sub 2}O{sub 3} nanoparticles

In this work, indium oxide (In{sub 2}O{sub 3}) nanoparticles have been synthesized by co-precipitation method and the effect of pH on the structural and sensor response values of In{sub 2}O{sub 3} nanoparticles has been reported. X-ray diffraction pattern (XRD) revealed the formation of cubic phase In{sub 2}O{sub 3} nanoparticles. FESEM results indicate the formation of nearly spherical shape In{sub 2}O{sub 3} nanoparticles. The band gap energy value changed with change in pH value and found to have highest value at pH 9. Indium oxide nanoparticles thus prepared were deposited as thick films on alumina substrates to act as gas sensors and their sensing response to ethanol vapors and LPG at 50 ppm was investigated at different operating temperatures. It has been observed that all sensors exhibited optimum response at 300°C towards ethanol and at 400°C towards LPG. In{sub 2}O{sub 3} nanoparticles prepared at pH 9, being smallest in size as compared to other, exhibit highest sensor response (SR).

77 NANOSCIENCE AND NANOTECHNOLOGY↗