Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “OXIDATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
DOE OSTI2016

Enhanced Electro-Kinetics of C-C Bond-Splitting during Ethanol Oxidation Reaction using Pt/Rh/Sn Catalyst with a Partially Oxidized Pt and Rh Core and a SnO2 Shell

Direct ethanol fuel cell (DEFC) is a promising technology for generating electricity via the electro-oxidation of liquid ethanol. Its implementation requires the development of anode catalysts capable of producing CO 2 and yielding 12-electron transfer through breaking C-C bond of ethanol. Here we presented comprehensive studies of electro-kinetics of the CO 2 generation on Pt/Rh/Sn ternary catalysts. Our studies showed that, for the first time, the tri–phase PtRhOx- SnO 2 catalysts with a partially oxidized Pt and Rh core and a SnO 2 shell, validated by X-ray absorption analyses and scanning transmission electron microscope-electron energy loss spectroscopy line scan, coincided with a 2.5-fold increase in the CO 2 generation rate towards ethanol oxidation reaction, compared with the bi-phase PtRh-SnO 2 catalysts with a metallic PtRh alloy core and commercial Pt. These studies provided insight on the design of a new genre of electro-catalysts with a partially oxidized noble metal.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2023

Surface Analysis Insight Note: Observations relating to photoemission peak shapes, oxidation state, and chemistry of titanium oxide films

It is common practice to describe the coordination of metal atoms in a binding configuration with their nearest neighbors in terms of oxidation state, a measure by which the number of electrons redistributed between atoms forming chemical bonds. In XPS terms, change to an oxidation state is commonly inferred by correlating photoemission signal with binding energy. The assumption, when classifying photoemission signals into distinct spectral shapes, is that a distribution of intensities shifted to lower binding energy is evidence of a reduction in oxidation state. In this Insight note, we raise the prospect that changes in photoemission peak shape may occur without obvious changes, determined by XPS in stoichiometry for a material. It is well known that TiO 2 measured by XPS yields reproducible Ti 2p photoemission peaks. However, on exposing TiO 2 to ion beams, Ti 2p photoemission evolves to complex distributions in intensity, which are particularly difficult to analyze by traditional fitting of bell-shaped curves to these data. For these reasons, in this Insight note, a thin film of TiO 2 deposited on a silicon substrate is chosen for analysis by XPS and linear algebraic techniques. Alterations in spectral shapes created from modified TiO 2 , which might be interpreted as the change in oxidation state, are assessed in terms of relative proportions of titanium to oxygen. It is found through detailed analysis of spectra that quantification by XPS, using procedures routinely used in practice, is not in accord with the typical interpretations of photoemission shapes. The data processing methods used and results presented in this work are of particular relevance to elucidating fundamental phenomena governing the surface evolution of materials-enabled energy processes where cyclic/non-steady usage changes the nature of bonding, especially in the presence of contaminants.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Influence of thermal treatment on structure and catalytic performance of ceria-zirconia supported copper oxide (CuO x /Ce y Zr 1-y O 2 ) catalysts for CO oxidation

Copper oxide (CuO x ) supported on ceria-zirconia (Ce y Zr 1-y O 2 , y = 1.0, 0.5, 0.0) catalysts were investigated to elucidate the effects of thermal treatment on their physicochemical properties and catalytic performance in carbon monoxide (CO) oxidation. Here, the catalysts were synthesized via a one-pot chemical vapor deposition (OP-CVD) method at 700˚C and 900˚C with controlled Cu loading. Characterization techniques, including synchrotron X-ray diffraction (S-XRD), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), inductively coupled plasma spectroscopy (ICP), and N 2 adsorption-desorption, were implemented to probe the crystalline structure, molecular and electronic structure, oxygen vacancies, specific surface area (SSA) and metal loading. CO oxidation was chosen as a model reaction to explore the structure-catalytic performance relationship. A ∼100% CO conversion was achieved at < 150˚C, particularly with the CuO x /CeO 2 catalyst calcined at 700˚C. In contrast, calcination at 900˚C caused a ∼90% decrease in SSA and a ∼24% increase in T 50 . Activity tests revealed that increasing ZrO 2 content lowered CO oxidation activity despite generating more defect sites. In-situ measurement of the 700 °C calcined samples revealed the presence of stable and unstable defects in CuO x /Ce 0.5 Zr 0.5 O 2 and CeO 2 respectively, which play a key role in the activity of the catalysts. The results highlight that catalytic performance is closely related to the SSA. Furthermore, an optimum calcination temperature favor significant oxygen vacancy formation with required CuO x -support interactions, enhancing redox properties and catalytic performance.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Oxidative Deboronation of Boronic Acids by Hydrogen Peroxide in Planta Generates Borate for Cross-Linking of Rhamnogalacturonan II

Vascular plants require boron to cross-link the rhamnogalacturonan-II (RG-II) domain of pectin to form functional cell walls. Boronic acids, which form reversible esters with cis-diols like borate, have been proposed to influence RG-II cross-linking, though the mechanism remains unclear. We used suspension-cultured rose cells adapted to grow without boron to investigate the effect of boronic acids on RG-II dimerization. When grown with phenylboronic acid (PBA) as the sole boron source, nearly all RG-II was crosslinked, whereas methylboronic acid (MBA) only partially restored cross-linking. In contrast, in vitro assays showed that homogeneous RG-II monomers did not dimerize with alkyl or aryl boronic acids unless supplemented with hydrogen peroxide (H2O2), which oxidatively converts boronic acids to boric acid. Real-time NMR spectroscopy and density functional theory calculations provided insight into the reaction mechanism and energetics of oxidation respectively. Together, our data show that exogenous boronic acids are a source of boric acid for plants, and that the deboronation reaction generates aryl or alkyl alcohol byproducts that can undergo further chemical modification in planta. The fate and potential roles of these byproducts in planta remain to be determined.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Distinguishing interfacial double layer and oxide-based capacitance on gold and pre-oxidized Fe-Cr in 1-ethyl-3-methylimidazolium methanesulfonate room temperature ionic liquid aqueous mixture

The frequency-dependent impedance of a metal/oxide/room temperature ionic liquid (RTIL) interface was separated into oxide layer (C ox ) and double layer (C dl ) capacitances using electrochemical impedance spectroscopy (EIS). A pre-formed oxide of known initial thickness on Fe-20 at.% Cr was investigated in 1-ethyl-3-methylimidazolium methanesulfonate ([Emim][MeSO 3 ]) RTIL + aqueous mixtures. The oxide thickness was calculated from C ox using the complex capacitance representation and the power-law model. The result was additionally verified by cross-sectional analysis using transmission electron microscopy. The C dl calculated from the constant-phase element (CPE) was distinguishable from C ox for Fe-20Cr, which enables monitoring of the interfaces of structural metals with oxide layers in RTILs containing water.

Constant-phase element↗
DOE OSTI2019

A proteome-wide assessment of the oxidative stress paradigm for metal and metal-oxide nanomaterials in human macrophages

Responsible implementation of engineered nanomaterials (ENMs) into commercial applications is an important societal issue, driving demand for new approaches for rapid and comprehensive evaluation of their bioactivity and safety. An essential part of any research focused on identifying potential hazard of ENMs is the appropriate selection of biological endpoints to evaluate. Herein, we use a tiered strategy employing both targeted biological assays and untargeted quantitative proteomics to elucidate the biological responses of human macrophages across a library of metal/metal oxide ENMs, raised as priority ENMs for investigation by NIEHS’s Nanomaterial Health Implications Research (NHIR) program. Our results show that quantitative cellular proteome profiles readily distinguish ENM types based on their cytotoxic potential according to induction of biological processes and pathways involved in the cellular antioxidant response, TCA cycle, oxidative stress, endoplasmic reticulum stress, and immune responses as major processes impacted. Interestingly, pathway analysis of differentially abundant proteins also revealed new cell processes that were influenced by all ENMs independent of cytotoxic potential. These included pathways previously implicated as cellular adaptive mechanisms to low levels of oxidative stress, including cell adhesion, protein translation and protein targeting pathways. Unsupervised clustering of all data revealed the most striking proteome changes that differentiated ENM classes involved a small subset of proteins involved in the oxidative stess response (HMOX1), protein chaperone functions (HS71B, DNJB1), and autophagy (SQSTM), providing a potential new panel of markers of ENM-induced cell stress. To our knowledge, the results represent the most comprehensive profiling of the biological responses to a library of ENMs conducted using quantitative mass spectrometry-based proteomics. The results provide a basis to identify the patterns of a diverse set of cellular pathways and cell processes impacted by ENM exposure in an important immune cell type, laying the foundation for multivariate, pathway-level structure activity assessments of ENMs in the future.

36 MATERIALS SCIENCE↗
DOE OSTI2016

In situ X-ray powder diffraction studies of the synthesis of graphene oxide and formation of reduced graphene oxide

Graphene oxide (GO) and reduced graphene oxide (rGO) are important materials in a wide range of fields. The modified Hummers methods, for synthesizing GO, and subsequent thermal reduction to rGO, are often employed for production of rGO. However, the mechanism behinds these syntheses methods are still unclear. We present an in situ X-ray diffraction study of the synthesis of GO and thermal reduction of GO. The X-ray diffraction revealed that the Hummers method includes an intercalation state and finally formation of additional crystalline material. The formation of GO is observed during both the intercalation and the crystallization stage. During thermal reduction of GO three stages were observed: GO, a disordered stage, and the rGO stage. The appearance of these stages depends on the heating ramp. The aim of this study is to provide deeper insight into the chemical and physical processes during the syntheses. - Graphical abstract: In situ X-ray diffraction results for of the modified Hummers synthesis and the thermal reduction of graphene oxide, revealing three stages for both syntheses as well as new GO diffraction peaks and unidentified crystalline material for the Hummers synthesis and a disordered stage for the thermal reduction of graphene oxide. Display Omitted - Highlights: • Hummers synthesis consists of three stages: dissolution, intercalation and crystal. • GO is produced early on during the synthesis and display new diffraction peaks. • An unidentified triclinic phase is observed for the Hummers synthesis. • Thermal reduction of GO display three stages: GO, a disordered stage and rGO. • In situ XRD indicate reformation of rGO even for fast heated thermal reduction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Tuning the activity of Cu-containing rare earth oxide catalysts for CO oxidation reaction: Cooling while heating paradigm in microwave-assisted synthesis

Highlights: • Organic chemistry synthesis concepts have been smartly tailored to catalysts’ development. • Enhanced microwave synthesis of (Ce-La-10Cu)O{sub 2} led to an one phase system. • CO{sub 2}-philicity, and oxygen vacancies can be tuned by synthesis. • Coupling microwave with air cooling led to T{sub 50} decrease by 32% in the CO oxidation reaction. - Abstract: (Ce-La-xCu)O{sub 2} catalysts with low (3 at.%) and high (10 at.%) Cu content were prepared by conventional microwave (MW) and enhanced microwave methods where air cooling (AC), while heating, was applied. The catalysts were tested for the CO oxidation reaction in the 25–500 °C range using 4%CO/20%O{sub 2}/He feed gas. Varying spectroscopic, microscopic and catalytic studies were used to probe the effect of synthesis on the nanostructure and the CO oxidation performance. It was found that the synthesis method adopted impacts on the extent of the Cu doping into the (Ce-La)O{sub 2} fluorite lattice, hence leading to one and two phases system in the case of catalyst prepared through enhanced (AC) and conventional (MW) microwave methods, respectively. Furthermore, only Ce{sup 4+} species were found on the surface of the (Ce-La-10Cu)O{sub 2} catalysts synthesized using MW and AC (XPS studies), whereas oxygen vacant sites which are associated with Ce{sup 3+} ions were indicated in the sub-surface/bulk (Raman studies). Ultimately, the catalysts with the low and high Cu loading, prepared under the AC-promoted microwave method, presented a superior performance against CO oxidation, exhibiting an overall improvement of the catalytic activity by 16% and 32%, respectively.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2014

Chlorine atom-initiated low-temperature oxidation of prenol and isoprenol: The effect of C=C double bonds on the peroxy radical chemistry in alcohol oxidation

The chlorine atom-initiated oxidation of two unsaturated primary C5 alcohols, prenol (3-methyl-2-buten-1-ol, (CH 3 ) 2 CCHCH 2 OH) and isoprenol (3-methyl-3-buten-1-ol, CH 2 C(CH 3 )CH 2 CH 2 OH), is studied at 550 K and low pressure (8 Torr). The time- and isomer-resolved formation of products is probed with multiplexed photoionization mass spectrometry (MPIMS) using tunable vacuum ultraviolet ionizing synchrotron radiation. The peroxy radical chemistry of the unsaturated alcohols appears much less rich than that of saturated C4 and C5 alcohols. The main products observed are the corresponding unsaturated aldehydes – prenal (3-methyl-2-butenal) from prenol oxidation and isoprenal (3-methyl-3-butenal) from isoprenol oxidation. No significant products arising from QOOH chemistry are observed. These results can be qualitatively explained by the formation of resonance stabilized allylic radicals via H-abstraction in the Cl + prenol and Cl + isoprenol initiation reactions. The loss of resonance stabilization upon O 2 addition causes the energies of the intermediate wells, saddle points, and products to increase relative to the energy of the initial radicals and O 2 . These energetic shifts make most product channels observed in the peroxy radical chemistry of saturated alcohols inaccessible for these unsaturated alcohols. The experimental findings are underpinned by quantum-chemical calculations for stationary points on the potential energy surfaces for the reactions of the initial radicals with O 2 . Under our conditions, the dominant channels in prenol and isoprenol oxidation are the chain-terminating HO 2 -forming channels arising from radicals, in which the unpaired electron and the –OH group are on the same carbon atom, with stable prenal and isoprenal co-products, respectively. These results suggest that the presence of C=C double bonds in alcohols will reduce low-temperature reactivity during autoignition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Experimental and computational investigations of ethane and ethylene kinetics with copper oxide particles for Chemical Looping Combustion

In this work, reaction pathways for the oxidation of methane, ethane, and ethylene with CuO was obtained by ReaxFF Molecular Dynamics (MD) simulations between temperatures of 1000 K and 2000 K. Experiments in a fixed-bed flow reactor were preformed with methane, ethane, and ethylene at temperatures ranging from 500 K to 1000 K with time-dependent species measurements from an Electron-Ionization Molecular Beam Mass Spectrometer (MBMS), and species validation with Gas Chromatography (GC) for detection of complete and intermediate combustion products. The MBMS and GC allow for the detection of oxygenated species and larger species produced from radical reformation. The simulation and experiment agree on the production of such species as CH 3 CHO, CH 2 O, CO, and H 2 O, which allow for the creation of simple C1 and C2 reaction pathways, which can be used in kinetic models of C2 species and larger fuels such as biofuels, which inherently depend on C1 and C2 kinetics and reaction pathway. The simulation and experiment disagree on the formation of C 2 H 2 , CH 3 OH, and CO 2 with large amounts of C 2 H 2 being measured in the ethylene oxidation simulations and CH 3 OH being formed in methane oxidation simulations, while neither species were experimentally found. In the case of CO 2 large amounts of CO 2 are rapidly produced in experiments with C2 fuels at 800 K, while little-to-no CO 2 was observed in simulations. This is believed to be resulting from the extremely short timescale of the simulations, preventing total oxidation of the fuel. Here, the differences in products produced between simulation and experiment allow for the potential to modify the ReaxFF potential functions to more accurately model the experimental products of Cu–H–O–C reaction kinetics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2018

Serendipity in Catalysis Research: Boron-Based Materials for Alkane Oxidative Dehydrogenation

In this Account, we will first present our initial discovery of boron nitride (BN) as an unexpected catalyst for the oxidative dehydrogenation of light alkanes. Beyond its surprising activity, BN also drew interest due to its low selectivity to carbon oxides. This observation made BN distinct from previously studied metal oxide catalysts for selective alkane oxidation. Here, we narrowed down its unique reactivity to the oxygen functionalization of the catalyst surface, particularly the formation of B–O species as probed by various spectroscopic techniques. In investigating the critical role of each of the structural elements during ODH, we discovered that not only BN but an entire class of boron-containing compounds are active and selective for the formation of propylene from propane.

03 NATURAL GAS↗
DOE OSTI2020

Impact of Residual Lithium on the Adoption of High-Nickel Layered Oxide Cathodes for Lithium-Ion Batteries

High-nickel layered oxide cathodes are becoming appealing for lithium-ion batteries employed in portable electronics and electric vehicles because of their higher energy density, low or no cobalt content, and ability to be manufactured with existing infrastructure. However, high-nickel layered oxides are plagued by the formation of residual lithium species, such as LiOH and Li 2 CO 3 , on the surface, which are detrimental to the manufacturing process and performance. Despite the problems residual lithium causes for the industry, academia mainly focuses on the safety risks and electrochemical impacts of residual lithium. In this Perspective, we examine the residual lithium problem through a lens of its impact on cathode slurry instability and large-scale manufacturing of high-nickel layered oxides. Additionally, methods of measuring residual lithium are discussed from the perspective of their accuracy as well as practicality in the manufacturing process. Furthermore, we hope that this Perspective would encourage the academic endeavor to consider the practical obstacles caused by residual lithium on the industrialization of high-nickel layered oxides and their mitigation, while attempting to improve their electrochemical performance and safety through doping, surface modifications, or other approaches.

25 ENERGY STORAGE↗
DOE OSTI2021

A Polar Magnetic and Insulating Double Corundum Oxide: Mn2MnSbO6 with Ordered Mn(II) and Mn(III) Ions

A new magnetic insulator Mn2MnSbO6 with a polar crystal structure and an ordered Mn2+ and Mn3+ arrangement was synthesized under a high pressure of 7.5 GPa and 1300 degrees C. The crystal structure of Mn2MnSbO6, investigated by synchrotron powder X-ray diffraction, was found to be isomorphous with that of Ni3TeO6-type, space group R3. The non-centrosymmetric structure was confirmed by the second-harmonic generation measurements. The X-ray absorption near-edge spectroscopy measurement confirmed the nominal oxidation states of Mn22+Mn3+SbO6. Magnetic measurements indicate that Mn2MnSbO6 orders antiferromagnetically below 44 K and undergoes a field-induced spin-flop transition at 5 K. First-principles calculations indicate an antiferromagnetic ground state with up/up/up/down/down/down (uuuddd) spin configuration of the six crystallographically unique Mn ions in the c-axis doubled magnetic structure. The density functional theory calculations also substantiate the experimentally observed charge ordering of the Mn2+/Mn3+ ions and the insulating behavior due to a bandgap of 0.52 eV. To the best of our knowledge, this is the first double corundum oxide containing Jahn-Teller active Mn3+ ions.

Feng, Hai L.↗