Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “OSCILLATION MODES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Electronic structures and magnetic/optical properties of metal phthalocyanine complexes

Electronic structures and magnetic / optical properties of metal phthalocyanine complexes were studied by quantum calculations using density functional theory. Effects of central metal and expansion of π orbital on aromatic ring as conjugation system on the electronic structures, magnetic, optical properties and vibration modes of infrared and Raman spectra of metal phthalocyanines were investigated. Electron and charge density distribution and energy levels near frontier orbital and excited states were influenced by the deformed structures varied with central metal and charge. The magnetic parameters of chemical shifts in {sup 13}C-nuclear magnetic resonance ({sup 13}C-NMR), principle g-tensor, A-tensor, V-tensor of electric field gradient and asymmetry parameters derived from the deformed structures with magnetic interaction of nuclear quadruple interaction based on electron and charge density distribution with a bias of charge near ligand under crystal field.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Stability of gyrotron operation in very high-order modes

This study was motivated by the desire to increase the power, which can be delivered by gyrotrons in long pulse and continuous regimes. Since the admissible power level is determined by the density of ohmic losses in resonator walls, to increase the radiated power a gyrotron should operate in higher order modes. Using an existing gyrotron developed for plasma experiments in the International Thermonuclear Experimental Reactor as a base model, the stability of operation of such a gyrotron in modes with larger number of radial variations was studied. It is shown that the power level achievable in such gyrotrons in stable single mode regimes is close to 1.5 MW. The power level 1.7-1.8 MW can be realized in regimes where the oscillations of the desired mode are accompanied by excitation of distant sidebands whose power is about 1% level of the power of the operating mode. Finally, in the case of operation at the 2-MW level, either the desired mode loses its stability and is replaced by less efficient oscillations of a mode with a smaller azimuthal index or oscillations of the operating mode are accompanied by excitation of sidebands with equally spaced frequencies.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Structures and thermoelectric properties of double-filled (Ca{sub x}Ce{sub 1−x})Fe{sub 4}Sb{sub 12} skutterudites

The structures and thermoelectric properties of the double-filled (Ca{sub x}Ce{sub 1−x})Fe{sub 4}Sb{sub 12} series (x=0, 0.25, 0.5, 0.75, and 1) have been studied using a combined experimental and computational methods. Compounds of (Ca{sub x}Ce{sub 1−x})Fe{sub 4}Sb{sub 12} were obtained only for x=0, 0.5, and 1. Composition with x=0.25 was found to be a mixture of x=0 and 0.5 compounds, and composition with x=0.75 was found to be a mixture of x=1 and 0.5 compounds, respectively. Our conclusions on phase formation are supported by density functional theory (DFT) calculations. In Ca{sub 0.5}Ce{sub 0.5}Fe{sub 4}Sb{sub 12,} Ca substitution in the Ce site of CeFe{sub 4}Sb{sub 12} leads to high hole concentrations, resulting in stronger semimetal transport as compared to CeFe{sub 4}Sb{sub 12}. Ca{sub 0.5}Ce{sub 0.5}Fe{sub 4}Sb{sub 12} yields a slightly higher ZT value than that of CeFe{sub 4}Sb{sub 12}, which is attributed to its lower lattice thermal conductivity. Phonon mode calculations adopting a three-particle bending model suggest that thermal conductivity is reduced upon Ca substitution because of an additional vibration mode which involves both Ca and Ce atoms. - Graphical abstract: Detailed structural information to correlate with thermoelectric properties in a series of double-filled (Ca{sub x}Ce{sub 1−x})Fe{sub 4}Sb{sub 12} skutterudite samples were obtained using synchrotron X-ray diffraction and first principle calculations. - Highlights: • Research focus on phase stability of CaCe double-filled p-type skutterudite. • Stable structure forms for an equiatomic occupancy of the voids by Ca and Ce. • Samples feature two-phase mixtures with variations of filling atoms ratio. • Phase stablility is investigated by DFT total energy calculations. • Sample with Equiatomic occupancy of Ca and Ce show higher ZT.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Study of Organosilicon Plasma Polymer Used in Composite Layers with Biomedical Application

In this work we study the ability of plasma polymer (PP) films obtained from hexamethyldisiloxane (HMDS) on silica glass (SG) to induce hydroxyapatite (HA)-based composite layers from a mixture of simulated body fluid (SBF) and clear solution of detonation nanodiamond (DND) by a biomimetic process. The grown composites (PPHMDS/HADND) were studied by scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy and Rutherford backscattering (RBS) techniques. FTIR spectra of the PPHMDS indicated diminishing of the polymer characteristic bands when the polymer is immersed in DND clear solution. Furthermore, after sample immersion in the SBF-DND mixture, the FTIR spectra showed the presence of carbonate-containing HA through the characteristic vibration modes of P-O in the phosphate group and C-O in the carbonate group. The formation of HA layers, rich in silica and/or carbon was confirmed by RBS and SEM. The cell viability measured after 7 days on the polymer surface is more then 95% for all samples. The results show that the PPHMDS is promising as a substrate for growing HA/DND layers and that the materials obtained are biocompatible. The variations of plasma polymerization conditions and modification of the composite layers will aid in using such materials for biomedical applications.

36 MATERIALS SCIENCE↗

Ultrasonic fingerprint sensor using a piezoelectric micromachined ultrasonic transducer array integrated with complementary metal oxide semiconductor electronics

This paper presents an ultrasonic fingerprint sensor based on a 24 × 8 array of 22 MHz piezoelectric micromachined ultrasonic transducers (PMUTs) with 100 μm pitch, fully integrated with 180 nm complementary metal oxide semiconductor (CMOS) circuitry through eutectic wafer bonding. Each PMUT is directly bonded to a dedicated CMOS receive amplifier, minimizing electrical parasitics and eliminating the need for through-silicon vias. The array frequency response and vibration mode-shape were characterized using laser Doppler vibrometry and verified via finite element method simulation. The array's acoustic output was measured using a hydrophone to be ∼14 kPa with a 28 V input, in reasonable agreement with predication from analytical calculation. Pulse-echo imaging of a 1D steel grating is demonstrated using electronic scanning of a 20 × 8 sub-array, resulting in 300 mV maximum received amplitude and 5:1 contrast ratio. Because the small size of this array limits the maximum image size, mechanical scanning was used to image a 2D polydimethylsiloxane fingerprint phantom (10 mm × 8 mm) at a 1.2 mm distance from the array.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Distribution of free carriers near heavily-doped epitaxial surfaces of n-type Ge(100) upon HF and HCl treatments

Carrier distributions near n-type epitaxially-grown Ge(100) surfaces with high impurity concentrations (1 × 10{sup 20} cm{sup −3}) were studied using high resolution electron energy loss spectroscopy (HREELS) upon surface treatments in aqueous solutions of HF and HCl. After surface treatments with HCl and HF, the molecular vibration modes distinctly showed either chloride or hydride terminations of Ge surfaces with negligible oxidation. The free-carrier concentration profile was inferred from the conduction band plasmon measurements as a function of the incident electron energies employing a dielectric theory simulation with a 4-layer structure and an effective electron mass of 0.02m{sub 0}. A carrier-free layer of 40 and 24 Å were derived for HCl- and HF-treated Ge(100), respectively. The surface band bending was estimated to be 0.32 eV for HF-treated Ge. HCl-treated Ge surfaces showed a band bending of 0.91 eV attributed to the strong effect of the surface Cl-Ge dipole.

36 MATERIALS SCIENCE↗

Verification and validation of linear gyrokinetic simulation of Alfven eigenmodes in the DIII-D tokamak

A verification and validation study is carried out for a sequence of reversed shear Alfven instability time slices. The mode frequency increases in time as the minimum (q{sub min}) in the safety factor profile decreases. Profiles and equilibria are based upon reconstructions of DIII-D discharge (no. 142111) in which many such frequency up-sweeping modes were observed. Calculations of the frequency and mode structure evolution from two gyrokinetic codes, GTC and GYRO, and a gyro-Landau fluid code TAEFL are compared. The experimental mode structure of the instability was measured using time-resolved two-dimensional electron cyclotron emission imaging. The three models reproduce the frequency upsweep event within {+-}10% of each other, and the average of the code predictions is within {+-}8% of the measurements; growth rates are predicted that are consistent with the observed spectral line widths. The mode structures qualitatively agree with respect to radial location and width, dominant poloidal mode number, ballooning structure, and the up-down asymmetry, with some remaining differences in the details. Such similarities and differences between the predictions of the different models and the experimental results are a valuable part of the verification/validation process and help to guide future development of the modeling efforts.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Influence of Al doping concentration on the opto-electronic chattels of SnS thin films readied by NSP

Herein, we limelight the key features of SnS thin films coated by spray pyrolysis process with different Al doping concentrations. The SnS thin films coated with different Al concentration (0, 2, 4, 6 at wt%) were characterized by various techniques. Structural parameters studied by XRD data revealed that all the prepared films were orthorhombic crystal structure with (111) as a preferential direction. Raman spectroscopy showed the presence of Ag, B{sub 1g}, B{sub 2g}, and B{sub 3g} vibration modes at their corresponding wave numbers. Concentration dependent granular change of Al:SnS films were shown by AFM images. The presence of Sn, S and Al element without any other impurities was confirmed through EDAX picture. UV studies revealed the shrinkage of band gap from 1.97 to 1.72 eV on increasing the Al doping concentration from 0% to 4 at wt%. Room temperature PL showed a high intense red shift, as emission observed at 722 nm for 4% of Al doped SnS thin film. Hall measurements exhibited p-type conducting nature of undoped and Al doped SnS films. The films showed a lowest resistivity of 2.695×10{sup −1} Ω cm for 4 at wt% Al doping concentration. 0.093% efficiency was obtained for the solar cell device fabricated by 4 at wt% of Al doped SnS thin film.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

A Synthetic Precedent for the [Fe**IV(2)(Angstrom-O)(2)] Diamond Core Proposed for Methane Monooxygenase Intermediate Q

Intermediate Q, the methane-oxidizing species of soluble methane monooxygenase, is proposed to have an [Fe{sup IV}{sub 2}({mu}-O){sub 2}] diamond core. In an effort to obtain a synthetic precedent for such a core, bulk electrolysis at 900 mV (versus Fc{sup +/0}) has been performed in MeCN at -40{sup o}C on a valence-delocalized [Fe{sup III}Fe{sup IV}({mu}-O){sub 2}(L{sup b}){sub 2}]{sup 8+} complex (1b) (E{sub 1/2} = 760 mV versus Fc{sup +/0}). Oxidation of 1b results in the near-quantitative formation of a deep red complex, designated 2b, that exhibits a visible spectrum with {lambda}{sub max} at 485 nm (9,800 M{sup -1}{center_dot}cm{sup -1}) and 875 nm (2,200 M{sup -1}{center_dot}cm{sup -1}). The 4.2 K Moessbauer spectrum of 2b exhibits a quadrupole doublet with {delta} = -0.04(1) mm{center_dot}s{sup -1} and {Delta}E{sub Q} = 2.09(2) mm{center_dot}s{sup -1}, parameters typical of an iron(IV) center. The Moessbauer patterns observed in strong applied fields show that 2b is an antiferromagnetically coupled diiron(IV) center. Resonance Raman studies reveal the diagnostic vibration mode of the [Fe{sub 2}({mu}-O){sub 2}] core at 674 cm{sup -1}, downshifting 30 cm{sup 01} upon {sup 18}O labeling. Extended x-ray absorption fine structure (EXAFS) analysis shows two O/N scatterers at 1.78 {angstrom} and an Fe scatterer at 2.73 {angstrom}. Based on the accumulated spectroscopic evidence, 2b thus can be formulated as [Fe{sup IV}{sub 2}({mu}-O){sub 2}(L{sup b}){sub 2}]{sup 4+}, the first synthetic complex with an [Fe{sup IV}{sub 2}({mu}-O){sub 2}] core. A comparison of 2b and its mononuclear analog [Fe{sup IV}(O)(L{sup b})(NCMe)]{sup 2+} (4b) reveals that 4b is 100-fold more reactive than 2b in oxidizing weak C-H bonds. This surprising observation may shed further light on how intermediate Q carries out the hydroxylation of methane.

03 NATURAL GAS↗

New determination of the gravitational constant G with time-of-swing method

A new determination of the Newtonian gravitational constant G is presented by using a torsion pendulum with the time-of-swing method. Compared with our previous measurement with the same method, several improvements greatly reduced the uncertainties as follows: (i) two stainless steel spheres with more homogeneous density are used as the source masses instead of the cylinders used in the previous experiment, and the offset of the mass center from the geometric center is measured and found to be much smaller than that of the cylinders; (ii) a rectangular glass block is used as the main body of the pendulum, which has fewer vibration modes and hence improves the stability of the period and reduces the uncertainty of the moment of inertia; (iii) both the pendulum and source masses are placed in the same vacuum chamber to reduce the error of measuring the relative positions; (iv) changing the configurations between the ''near'' and ''far'' positions is remotely operated by using a stepper motor to lower the environmental disturbances; and (v) the anelastic effect of the torsion fiber is first measured directly by using two disk pendulums with the help of a high-Q quartz fiber. We have performed two independent G measurements, and the two G values differ by only 9 ppm. The combined value of G is (6.673 49{+-}0.000 18)x10{sup -11} m{sup 3} kg{sup -1} s{sup -2} with a relative uncertainty of 26 ppm.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Mechanosynthesis and structural characterization of nanocrystalline Ce{sub 1–x}Y{sub x}O{sub 2–δ} (x=0.1–0.35) solid solutions

A series of nanostructured fluorite-type Ce{sub 1–x}Y{sub x}O{sub 2–δ} (0≤x≤0.35) solid solutions, prepared via high-energy milling of the CeO{sub 2}/Y{sub 2}O{sub 3} mixtures, are investigated by XRD, HR-TEM, EDS and Raman spectroscopy. For the first time, complementary information on both the long-range and short-range structural features of mechanosynthesized Ce{sub 1–x}Y{sub x}O{sub 2–δ}, obtained by Rietveld analysis of XRD data and Raman spectroscopy, is provided. The lattice parameters of the as-prepared solid solutions decrease with increasing yttrium content. Rietveld refinements of the XRD data reveal increase in microstrains in the host ceria lattice as a consequence of yttrium incorporation. Raman spectra are directly affected by the presence of oxygen vacancies; their existence is evidenced by the presence of vibration modes at ~560 and ~600 cm{sup –1}. The detailed spectroscopic investigations enable us to separate extrinsic and intrinsic origin of oxygen vacancies. It is demonstrated that mechanosynthesis can be successfully employed in the one-step preparation of nanocrystalline Ce{sub 1–x}Y{sub x}O{sub 2–δ} solid solutions. - Graphical abstract: Mechanosynthesis of nanocrystalline Ce{sub 1–x}Y{sub x}O{sub 2–δ} (x=0.1–0.35) solid solutions. - Highlights: • One-step mechanosynthesis of nanoscale Ce{sub 1–x}Y{sub x}O{sub 2–δ} (0≤x≤0.35) solid solutions. • Complementary information on the long-range and short-range structural features of mechanosynthesized Ce{sub 1–x}Y{sub x}O{sub 2–δ} is provided. • Structural variations as a response to the yttrium doping. • Separation of extrinsic and intrinsic origin of the induced oxygen vacancies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Contribution of the entropy on the thermodynamic equilibrium of vacancies in nickel

The equilibrium vacancy concentration in nickel was determined from ab initio calculations performed with both generalized gradient approximation and local density approximation up to the melting point. We focus the study on the vacancy formation entropy expressed as a sum of a vibration and an electronic contribution, which were determined from the vibration modes and the electronic densities of states. Applying a method based on the quasi-harmonic approximation, the temperature dependence of the defect formation energy and entropy were calculated. We show that the vibrations of the first shell of atoms around the defect are predominant to the vibration formation entropy. On the other hand, the electronic formation entropy is very sensitive to the exchange-correlation potential used for the calculations. Finally, the vacancy concentration is computed at finite temperature with the calculated values for the defect formation energy and entropy. In order to reconcile point-defects concentration obtained with our calculations and experimental data, we conducted complementary calorimetric measurements of the vacancy concentration in the 1073–1273 K temperature range. Close agreement between theory and experiments at high temperature is achieved if the calculations are performed with the generalized gradient approximation and both vibration and electronic contributions to the formation entropy are taken into account.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Relationship between Eu{sup 3+} reduction and glass polymeric structure in Al{sub 2}O{sub 3}-modified borate glasses under air atmosphere

The reduction of Eu{sup 3+} to Eu{sup 2+} is realized efficiently in Eu{sub 2}O{sub 3}-doped borate glasses prepared under air condition by melting-quenching method. Luminescent spectra show an increasing tendency of Eu{sup 2+} emission with increasing Al{sub 2}O{sub 3} concentration in B{sub 2}O{sub 3}–Na{sub 2}O glasses. It is interesting that significant enhancement appeared of Eu{sup 2+} luminescence in the Al{sub 2}O{sub 3}-rich sample comparing to the samples of Al{sub 2}O{sub 3} less than 6 mol%. FTIR and Raman scattering measurements indicated that some new vibration modes assigned to the low-polymerized structure groups decomposed from the slight Al{sub 2}O{sub 3} dopant samples. These results demonstrated that the polymerization of the glass structure decreased with increasing incorporation of Al{sub 2}O{sub 3} into the borate glasses, linking to the efficiency of Eu{sup 3+} self-reduction in air at high temperature. - graphical abstract: A novel europium valence reduction phenomenon occurred in Al{sub 2}O{sub 3} modified borate glasses, FTIR and Raman measurements revealed that high polymeric groups were destroyed to low polymery structures with Al{sub 2}O{sub 3} addition. - Highlights: • The efficient reduction of Eu{sup 3+} to Eu{sup 2+} is observed in the B{sub 2}O{sub 3}–Na{sub 2}O glasses. • Eu{sup 2+} luminescence is significant enhanced in the Al{sub 2}O{sub 3}-rich glasses. • The introduction of Al{sub 2}O{sub 3} changed the network structure of the borate glasses. • High polymeric borate groups in the glass matrix may be destroyed to the lower ones.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High burn-up spent nuclear fuel vibration integrity study - 15134

The Oak Ridge National Laboratory (ORNL) has developed the cyclic integrated reversible-bending fatigue tester (CIRFT) approach to successfully demonstrate the controllable fatigue fracture of high burnup (HBU) spent nuclear fuel (SNF) in a normal vibration mode. CIRFT enables examination of the underlying mechanisms of SNF system dynamic performance. Due to the inhomogeneous composite structure of the SNF system, the detailed mechanisms of pellet-pellet and pellet-clad interactions and the stress concentration effects at the pellet-pellet interface cannot be readily obtained from a CIRFT system measurement. Therefore, finite element analyses (FEAs) are being used to complement the experimental work by estimating values of local stresses and strains from the measured global moment-curvature. These results and their implications will be used for further investigation. Major findings of CIRFT on the HBU SNF are as follows: - The degree of bonding between pellets, as well as the bonding between pellets and clad in the SNF system plays an important role in the vibration performance of SNF. - Fuel structure contributes to SNF system stiffness. - There are significant variations in stress and curvature of SNF systems during vibration cycles resulting from segment pellet and clad interactions. - SNF failure initiates at the pellet-pellet interface region and appears to be spontaneous. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

TESTING OF THE DUAL ROTARY FILTER SYSTEM

The Savannah River National Laboratory (SRNL) installed and tested two hydraulically connected SpinTek rotary microfilter (RMF) units to determine the behavior of a multiple filter system. Both units were successfully controlled by a control scheme written in DELTA-V architecture by Savannah River Remediation (SRR) Process Control Engineering personnel. The control system was tuned to provide satisfactory response to changing conditions during the operation of the multi-filter system. Stability was maintained through the startup and shutdown of one of the filter units while the second was still in operation. The installation configuration originally proposed by the Small Colum Ion Exchange (SCIX) project of independent filter and motor mountings may be susceptible to vibration. Significant stiffening of the filter and motor mounts was required to minimize the vibration. Alignment of the motor to the filter was a challenge in this test configuration. The deployment configuration must be easy to manipulate and allow for fine adjustment. An analysis of the vibration signature of the test system identified critical speeds. Whether it corresponds to the resonance frequency of a rotor radial vibration mode that was excited by rotor unbalance is uncertain based upon the measurements. A relative motion series should be completed on the filter with the final shaft configuration to determine if the resonances exist in the final filter design. The instrumentation selected for deployment, including the concentrate discharge control valve and flow meters, performed well. Automation of the valve control integrated well with the control scheme and when used in concert with the other control variables, allowed automated control of the dual RMF system. The one area of concern with the instrumentation was the condition resulting when the filtrate flow meter operated with less than three gpm. This low flow was at the lower range of performance for the flow meter. This should not be an issue in deployment where the desired flow rate will be within the normal operating range of the meter. Testing demonstrated that the use of a flexible line for the filtrate discharge is highly desired at the outlet of the rotary union to transition to the system piping. Isolating the vibration from the rotary union will significantly improve the lifetime of the seals. Methods to monitor and isolate individual filters should be considered during deployment. The ability to diagnose issues and isolate individual filters would allow isolation prior to failure. Thus, filters may be cleaned or repaired instead of requiring complete replacement if the condition were to continue unnoticed. Isolating the filtrate line of each filter during startup will minimize the premature buildup of solids on the filter disks. Several tests have shown that the method of filter startup can improve performance lifetime of the filters. The installation must factor in an air inlet for the draining of a filter that does not involve a reverse flow through the filter disks. The reverse flow may cause deformation of the disks or may damage other components of the filters themselves.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Isolating the anthropogenic component of Arctic warming

Structural equation modeling is used in statistical applications as both confirmatory and exploratory modeling to test models and to suggest the most plausible explanation for a relationship between the independent and the dependent variables. Although structural analysis cannot prove causation, it can suggest the most plausible set of factors that influence the observed variable. Here, we apply structural model analysis to the annual mean Arctic surface air temperature from 1900 to 2012 to find the most effective set of predictors and to isolate the anthropogenic component of the recent Arctic warming by subtracting the effects of natural forcing and variability from the observed temperature. We also find that anthropogenic greenhouse gases and aerosols radiative forcing and the Atlantic Multidecadal Oscillation internal mode dominate Arctic temperature variability. Finally, our structural model analysis of observational data suggests that about half of the recent Arctic warming of 0.64 K/decade may have anthropogenic causes.

54 ENVIRONMENTAL SCIENCES↗

Two-mode generalization of the Jaynes–Cummings and Anti-Jaynes–Cummings models

We introduce two generalizations of the Jaynes–Cummings (JC) model for two modes of oscillation. The first model is formed by two Jaynes–Cummings interactions, while the second model is written as a simultaneous Jaynes–Cummings and Anti-Jaynes–Cummings (AJC) interactions. We study some of its properties and obtain the energy spectrum and eigenfunctions of these models by using the tilting transformation and the Perelomov number coherent states of the two-dimensional harmonic oscillator. Moreover, as physical applications, we connect these new models with two important and novel problems: The relativistic non-degenerate parametric amplifier and the relativistic problem of two coupled oscillators.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗