Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “OMIT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Distribution change of oxygen vacancies in layered perovskite type(Sr, La){sub n+1}Fe{sub n}O{sub 3n+1} (n=3)

To elucidate characteristic oxygen vacancy formation in layered perovskite (Sr, La){sub n+1}Fe{sub n}O{sub 3n+1} with the perovskite layer number: n=3, oxygen vacancy content δ of the (Sr{sub 0.775}La{sub 0.225}){sub 4}Fe{sub 3}O{sub 10−δ} (SLF4310) was investigated using a titration technique and a thermogravimetric analysis. The equilibrium constant K for the reduction reaction: Oo{sup ×}+2Fe{sub Fe}{sup ∙} (Fe{sup 4+})=1/2O{sub 2}+Vo{sup ∙∙}+2Fe{sub Fe}{sup ×}(Fe{sup 3+}) was estimated using the vacancy content δ. The Arrhenius plot of the K reveals slope change at approximately 775 °C. From the Rietveld analysis, the oxygen vacancies are the most remarkable at the O2 (O4) sites at lower (higher) temperatures than about 800 °C, which temperature is approximately comparable with that of slope change in the K. These facts mean that distribution of vacancy sites in the SLF4310 changes at approximately 775 °C, accompanying no structural phase transition. The vacancy distribution change affects to the ion conductivity of the SLF4310. - Graphical abstract: Crystal structure of (Sr{sub 0.775}La{sub 0.225}){sub 4}Fe{sub 3}O{sub 10−δ} (SLF4310) at 1000 °C. Display Omitted - Highlights: • Distribution change of oxygen vacancies is appeared at approximately 775 °C. • The distribution change with no structure phase transition is the first observation. • The vacancy distribution change affects the ion conductivity of the SLF4310.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NbF{sub 5} and TaF{sub 5}: Assignment of {sup 19}F NMR resonances and chemical bond analysis from GIPAW calculations

The {sup 19}F isotropic chemical shifts (δ{sub iso}) of two isomorphic compounds, NbF{sub 5} and TaF{sub 5}, which involve six nonequivalent fluorine sites, have been experimentally determined from the reconstruction of 1D {sup 19}F MAS NMR spectra. In parallel, the corresponding {sup 19}F chemical shielding tensors have been calculated using the GIPAW method for both experimental and DFT-optimized structures. Furthermore, the [M{sub 4}F{sub 20}] units of NbF{sub 5} and TaF{sub 5} being held together by van der Waals interactions, the relevance of Grimme corrections to the DFT optimization processes has been evaluated. However, the semi-empirical dispersion correction term introduced by such a method does not show any significant improvement. Nonetheless, a complete and convincing assignment of the {sup 19}F NMR lines of NbF{sub 5} and TaF{sub 5} is obtained, ensured by the linearity between experimental {sup 19}F δ{sub iso} values and calculated {sup 19}F isotropic chemical shielding σ{sub iso} values. The effects of the geometry optimizations have been carefully analyzed, confirming among other matters, the inaccuracy of the experimental structure of NbF{sub 5}. The relationships between the fluorine chemical shifts, the nature of the fluorine atoms (bridging or terminal), the position of the terminal ones (opposite or perpendicular to the bridging ones), the fluorine charges, the ionicity and the length of the M–F bonds have been established. Additionally, for three of the {sup 19}F NMR lines of NbF{sub 5}, distorted multiplets, arising from {sup 1}J-coupling and residual dipolar coupling between the {sup 19}F and {sup 93}Nb nuclei, were simulated yielding to values of {sup 93}Nb–{sup 19}F {sup 1}J-coupling for the corresponding fluorine sites. - Graphical abstract: The complete assignment of the {sup 19}F NMR lines of NbF{sub 5} and TaF{sub 5} allow establishing relationships between the {sup 19}F δ{sub iso} values, the nature of the fluorine atoms (bridging or terminal), the position of the terminal ones (opposite or perpendicular to the bridging ones), the fluorine charges, the ionicity and the length of the M–F bonds. Display Omitted - Highlights: • The {sup 19}F δ{sub iso} values of NbF{sub 5} and TaF{sub 5} have been determined. • The {sup 19}F chemical shielding tensors have been calculated using the GIPAW method. • A confident assignment of the {sup 19}F NMR lines of NbF{sub 5} and TaF{sub 5} is obtained. • The relationships between the {sup 19}Fδ{sub iso} values and the M–F bonds features are established.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

BaZn{sub 2}Si{sub 2}O{sub 7} and the solid solution series BaZn{sub 2−x}Co{sub x}Si{sub 2}O{sub 7} (0<x≤2) as high temperature seals for solid oxide fuel cells studied by high-temperature X-ray diffraction and dilatometry

For sealing of solid oxide fuel cells, glasses from which crystalline phases with high coefficient of thermal expansion (CTE) can be crystallized are required. In this paper, a new solid solution series BaZn{sub 2−x}Co{sub x}Si{sub 2}O{sub 7} (0<x≤2) is introduced which exhibit extremely high CTE. The prepared powders were characterized by X-ray diffraction and high-temperature X-ray diffraction (BaZn{sub 2}Si{sub 2}O{sub 7}). Sintered specimens were characterized by dilatometry. The introduction of Co{sup 2+} does not lead to a change in the space group. All compounds show a transition of a low to a high temperature modification. The attributed temperature increases from 300 °C for BaZn{sub 2}Si{sub 2}O{sub 7} to 850 °C for BaCo{sub 2}Si{sub 2}O{sub 7}. The volume expansion which runs parallel to the phase transition decreases with increasing cobalt concentration. The phase BaZn{sub 2}Si{sub 2}O{sub 7} shows the largest CTE and a steep volume effect during phase transition. For the compound BaZn{sub 0.25}Co{sub 1.75}Si{sub 2}O{sub 7} the CTE is minimum (8.6×10{sup −6} K{sup −1} (50–900 °C)) and increases again until for the compound BaCo{sub 2}Si{sub 2}O{sub 7} a CTE of 16.6×10{sup −6} K{sup −1} (50–900 °C) is reached. In the cobalt rich composition range, the CTEs are in the right range for high temperature fuel cells and can be adjusted by the composition. - Graphical abstract: The composition of the solid solution BaZn{sub 2−x}Co{sub x}Si{sub 2}O{sub 7} strongly affects the thermal expansion. Display Omitted - Highlights: • We examined the thermal expansion of solid solutions BaZn{sub 2−x}Co{sub x}Si{sub 2}O{sub 7} (0<x≤2). • BaZn{sub 2}Si{sub 2}O{sub 7} exhibits the highest thermal expansion due to a phase transition. • Substitution of small amounts of Zn{sup 2+} against Co{sup 2+} lead to decreasing thermal expansion. • The thermal expansions re-increased with further increasing Co{sup 2+} concentrations. • Seals based on these solid solutions should be suitable for solid oxide fuel cells.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydrothermal reactions: From the synthesis of ligand to new lanthanide 3D-coordination polymers

The organic ligand 2,5-piperazinedione-1,4-diacetic acid (H{sub 2}PDA) was synthesized under hydrothermal conditions starting from the iminodiacetic acid and catalyzed by oxalic acid. The X-ray powder diffraction data indicates that the compound crystallizes in the P2{sub 1}/c monoclinic system as reported in the literature. The ligand was also characterized by elemental analysis, magnetic nuclear resonance, infrared spectroscopy and thermogravimetric analysis. Two new coordination networks based on lanthanide ions were obtained with this ligand using hydrothermal reaction. In addition to single-crystal X-ray diffraction, the compounds were characterized by infrared spectroscopy, thermogravimetric analysis, scanning electron microscopy and elemental analysis. Single-crystal XRD showed that the compounds are isostructural, crystallizing in P2{sub 1}/n monoclinic system with chemical formula [Ln(PDA){sub 1.5}(H{sub 2}O)](H{sub 2}O){sub 3} (Ln=Gd{sup 3+}(1) and Eu{sup 3+}(2)).The luminescence properties of both compounds were studied. In the compound (1), a broad emission band was observed at 479 nm, redshifted by 70 nm in comparison of the free ligand. In (2), the typical f–f transition was observed with a maximum peak at 618 nm, related with the red emission of the europium ions. Computational methods were performed to simulate the crystal structure of (2). The theoretical calculations of the intensity parameters are in good agreement with the experimental values. - Graphical abstract: Scheme of obtaining the ligand 2,5-piperazinedione-1,4-diacetic acid (H{sub 2}PDA) and two new isostructural 3D-coordination polymers [Ln(PDA){sub 1.5}(H{sub 2}O)](H{sub 2}O){sub 3} (Ln=Gd{sup 3+} and Eu{sup 3+}) by hydrothermal synthesis. Display Omitted - Highlights: • The ligand 2,5-piperazinedione-1,4-diacetic acid was synthetized using the hydrothermic method and characterized. • Two new 3D-coordination polymers with this ligand containing Gd{sup 3+} and Eu{sup 3+} ions were also obtained. • The compounds are isostructural and the typical luminescent properties were observed in both structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interaction of yttrium with nickel and phosphorus: Phase diagram and structural chemistry

The interaction between the components of the ternary Y–Ni–P system has been investigated by means of electron probe microanalysis, X-ray phase and structure analyses, and the isothermal section of the phase diagram at 1070 K has been constructed for the first time. Existence of the earlier reported eight ternary phosphides of yttrium and nickel was confirmed, among them seven ternaries are daltonide compounds: YNi{sub 4}P{sub 2} (ZrFe{sub 4}Si{sub 2}-type structure), Y{sub 2}Ni{sub 12}P{sub 7} (Zr{sub 2}Fe{sub 12}P{sub 7}-type structure), Y{sub 6}Ni{sub 20}P{sub 13} (Zr{sub 6}Ni{sub 20}P{sub 13}-type structure), Y{sub 6}Ni{sub 14.9}P{sub 10.18} (own structure type), Y{sub 20}Ni{sub 42}P{sub 30.34} (Sm{sub 20}Ni{sub 41.6}P{sub 30}-type structure), Y{sub 15}Ni{sub 28}P{sub 21} (Tb{sub 15}Ni{sub 28}P{sub 21}-type structure), and YNiP (Tb{sub 1−x}NiP-type structure), whereas YNi{sub 1.66−1.78}P{sub 2} (ThCr{sub 2}Si{sub 2}-type structure) is a berthollide compound with small homogeneity range. The crystal structures of the some ternary phosphides have been determined by X-ray powder diffraction (YNi{sub 4}P{sub 2} and YNi{sub 1.66−1.78}P{sub 2}) and single crystal diffraction (Y{sub 2}Ni{sub 12}P{sub 7}) techniques. - Graphical abstract: Structure block with the composition Ln{sub 10}M{sub 21}X{sub 15} of the homologous series of the compounds (Ln,M){sub ∼2}X. Display Omitted - Highlights: • The phase diagram of Y–Ni–P at 1070 K has been constructed. • Existence of the eight ternary phosphides of yttrium and nickel has been confirmed. • The crystal structures of YNi{sub 4}P{sub 2} and YNi{sub 1.66-1.78}P{sub 2} have been determined by powder X-ray diffraction. • The crystal structure of Y{sub 2}Ni{sub 12}P{sub 7} has been established by single crystal diffraction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Gas phase contributions to topochemical hydride reduction reactions

Alkali and alkali earth hydrides have been used as solid state reductants recently to yield many interesting new oxygen-deficient transition metal oxides. These reactions have tacitly been assumed to be a solid phase reaction between the reductant and parent oxide. We have conducted a number of experiments with physical separation between the reductant and oxides, and find that in some cases reduction proceeds even when the reagents are physically separated, implying reactions with in-situ generated H{sub 2} and, to a lesser extent, getter mechanisms. Our findings change our understanding of these topochemical reactions, and should enhance the synthesis of additional new oxides and nanostructures. - Graphical abstract: Topochemical reductions with hydrides: Solid state or gas phase reaction? Display Omitted - Highlights: • SrFeO{sub 2} and LaNiO{sub 2} were prepared by topochemical reduction of oxides. • Separating the reducing agent (CaH{sub 2}, Mg metal) from the oxide still results in reduction. • Such topochemical reactions can occur in the gas phase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Simultaneous presence of (Si{sub 3}O{sub 10}){sup 8−} and (Si{sub 2}O{sub 7}){sup 6−} groups in new synthetic mixed sorosilicates: BaY{sub 4}(Si{sub 2}O{sub 7})(Si{sub 3}O{sub 10}) and isotypic compounds, studied by single-crystal X-ray diffraction, Raman spectroscopy and DFT calculations

Three new, isotypic silicate compounds, BaY{sub 4}(Si{sub 2}O{sub 7})(Si{sub 3}O{sub 10}), SrYb{sub 4}(Si{sub 2}O{sub 7})(Si{sub 3}O{sub 10}) and SrSc{sub 4}(Si{sub 2}O{sub 7})(Si{sub 3}O{sub 10}), were synthesized using high-temperature flux growth techniques, and their crystal structures were solved from single-crystal X-ray intensity data: monoclinic, P2{sub 1}/m, with a=5.532(1)/5.469(1)/5.278(1), b=19.734(4)/19.447(4)/19.221(4), c=6.868(1)/6.785(1)/6.562(1) Å, β=106.53(3)/106.20(3)/106.50(3)°, V=718.8(2)/693.0(2)/638.3(2) Å{sup 3}, R(F)=0.0225/0.0204/0.0270, respectively. The topology of the novel structure type contains isolated horseshoe-shaped Si{sub 3}O{sub 10} groups (Si–Si–Si=93.15–95.98°), Si{sub 2}O{sub 7} groups (Si–O{sub bridge}–Si=180°, symmetry-restricted) and edge-sharing M(1)O{sub 6} and M(2)O{sub 6} octahedra. Single-crystal Raman spectra of the title compounds were measured and compared with Raman spectroscopic data of chemically and topologically related disilicates and trisilicates, including BaY{sub 2}(Si{sub 3}O{sub 10}) and SrY{sub 2}(Si{sub 3}O{sub 10}). The band assignments are supported by additional theoretical calculation of Raman vibrations by DFT methods. - Graphical abstract: View of BaY{sub 4}(Si{sub 2}O{sub 7})(Si{sub 3}O{sub 10}) along [100], showing zigzag chains and the tri- and disilicate groups. The unit cell is outlined. Display Omitted - Highlights: • We report a novel interesting crystal structure type for mixed sorosilicates containing Y, Yb, and Sc. • Synthesis of such mixed sorosilicates is possible by a high-temperature flux-growth technique. • Calculation of Raman vibrations by advanced DFT methods allows a considerably improved interpretation of measured Raman spectra.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Molecular dynamics studies of the size and temperature dependence of the kinetics of freezing of Fe nanoparticles

Molecular dynamics (MD) computer simulations have been carried out and a novel modified technique of Voronoi polyhedra has been performed to identify solid-like particles in a molten nanoparticle. This technique works quite well in analyzing the effects of particle size on nucleation rates of iron nanoparticles in the temperature range of 750–1160 K. Nanoparticles with 1436 and 2133 Fe atoms have been examined and the results are compared with those obtained earlier with Fe{sub 331} nanoparticles. Nucleation rates for freezing obtained from MD simulations for Fe{sub 2133} vary from 8.8×10{sup 34} m{sup 3}/s to 4.1×10{sup 35} m{sup 3}/s at over a temperature range from 1160 K to 900 K, Rates for. Fe{sub 1436} and Fe{sub 331} are somewhat higher. Nucleation rates increase as supercooling deepens until the viscosity of the liquid increases sharply enough to slow down the rate. Bt applying classical nucleation theory, the interfacial free energy between solid and liquid cab be estimated From this and other thermodynamic information can be derived a theoretical expression for the size-dependence of the heat of fusion of nanoparticles. Results agreed quite well with those observed in our MD observations. An earlier expression in the literature for this size-dependence was shown to be incorrect. The size dependence of melting point is discussed. - Graphical abstract: Critical nuclei of crystallization. Display Omitted - Highlights: • Solid state material synthesis. • Material structure. • Experimental study of nucleation in condensed materials. • Computation study of nucleation in condensed materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Luminescence properties of a blue-emitting phosphor: (Sr{sub 1−x}Eu{sub x})Si{sub 9}Al{sub 19}ON{sub 31} (0<x≤1)

Blue-emitting Sr{sub 1−x}Eu{sub x}Si{sub 9}Al{sub 19}ON{sub 31} phosphors were synthesized at 1800 °C for 2 h under 1 MPa N{sub 2} by using the gas-pressure sintering method (GPS). The microstructure, photoluminescence (PL) properties of the prepared phosphors were investigated. Under the 290 nm excitation, broad PL emission bands with peak positions at 448–490 nm were detected. The concentration quenching was not observed owing to the large distance betweenEu{sup 2+} ions that made the nonradiative energy transfer between neighboring Eu{sup 2+} ions difficult. The blue phosphor generally showed a small thermal quenching at low Eu{sup 2+} concentrations. The absorption and external quantum efficiency of the synthesized Sr{sub 0.5}Eu{sub 0.5}Si{sub 9}Al{sub 19}ON{sub 31} were 85% and 62% upon the 365 nm excitation, respectively. The interesting PL results indicate that Sr{sub 1−x}Eu{sub x}Si{sub 9}Al{sub 19}ON{sub 31} has great potentials as a blue phosphor for white LEDs applications. - Graphical abstract: Sr{sub 0.7}Eu{sub 0.3}Si{sub 9}Al{sub 19}ON{sub 31} gives blue-emitting at 471 nm. Excitation spectrum is composed of five bands in the range of 250–450 nm, which are matching well with emission wavelength of UV LEDs. Display Omitted - Highlights: • Blue-emitting Sr{sub 1−x}Eu{sub x}Si{sub 9}Al{sub 19}ON{sub 31} phosphors were synthesized by gas-pressure sintering method. • The concentration quenching was not observed in this phosphor. • This blue phosphor generally showed a small thermal quenching at low Eu{sup 2+} concentrations. • The absorption and external quantum efficiency of the synthesized Sr{sub 0.5}Eu{sub 0.5}Si{sub 9}Al{sub 19}ON{sub 31} were 85% and 62% upon the 365 nm excitation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Two-dimensional titanium carbonitrides and their hydroxylated derivatives: Structural, electronic properties and stability of MXenes Ti{sub 3}C{sub 2−x}N{sub x}(OH){sub 2} from DFTB calculations

The structural, electronic properties and stability of the new MXene compounds—two-dimensional pristine carbonitrides Ti{sub 3}C{sub 2−x}N{sub x} and their hydroxylated derivatives Ti{sub 3}C{sub 2−x}N{sub x}(OH){sub 2} are studied by means of DFTB calculations. The genesis of the properties is discussed in the sequence: binary MXenes Ti{sub 3}C{sub 2} (Ti{sub 3}N{sub 2})→hydroxylated forms Ti{sub 3}C{sub 2}(OH){sub 2} (Ti{sub 3}N{sub 2}(OH){sub 2})→pristine MXene Ti{sub 3}C{sub 2−x}N{sub x}→hydroxylated Ti{sub 3}C{sub 2−x}N{sub x}(OH){sub 2}. All examined materials are metallic-like. The most favorable type of OH-covering is presented by the occupation of the hollow sites between three neighboring carbon (nitrogen) atoms. Two-dimensional MXene carbonitrides with random distribution of C and N atoms are found to be thermodynamically more favorable. - Graphical abstract: The side views of the optimized atomic structures of some examined hydroxylated derivatives of MXene Ti{sub 3}CN and their electronic band structures. Display Omitted - Highlights: • Very recently 2D titanium carbonitrides have been synthesized. • Structural, electronic properties and stability for these materials were evaluated. • The hydroxylated derivatives of 2D titanium carbonitrides are examined.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and structural and magnetic characterization of the frustrated magnetic system La{sub 2}Ni{sub 4/3−x}Co{sub x}Sb{sub 2/3}O{sub 6}

We report the synthesis of double perovskites La{sub 2}Ni{sub 4/3−x}Co{sub x}Sb{sub 2/3}O{sub 6} with x=0, 1/3, 2/3 and 1 by a solid state method. Rietveld refinements of X-ray and neutron powder diffraction data show that all samples crystallize in space group P2{sub 1}/n, with almost perfect occupation of the 2d octahedral site with the transition metals, while all Sb{sup 5+} are randomly distributed in a 2c octahedral site. The saturation magnetization in hysteresis loops indicates that the samples are ferrimagnetic throughout all the series. Virgin magnetization curves lie outside hysteresis loops at low temperatures and thermal evolution of H{sub m} – defined as the inflection point of these curves – follows the de Almeida–Thouless dependence for x≠0. This spin glass like behavior below 30 K is also supported by thermal evolution of the coercivity, which follows an exponential law typical of magnetic clusters, not found in the pure Ni{sup 2+} perovskite, x=0 extreme. - Graphical abstract: Display Omitted - Author-Highlights: • We synthesized new double perovskites: La{sub 2}Ni{sub 4/3−x}Co{sub x}SbO{sub 6} (x=1/3, 2/3, 1). • The cations occupying octahedral sites are highly ordered in all samples. • Magnetic transition occurs as a consequence of superexchange paths. • Frustration is found and attributed to competition between different interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of CO{sub 2} activation on electrochemical performance of microporous carbons derived from poly(vinylidene fluoride)

In this work, we have prepared microporous carbons (MPCs) derived from poly(vinylidene fluoride) (PVDF), and the physical activation of MPCs using CO{sub 2} gas is subsequently carried out with various activation temperatures to investigate the electrochemical performance. PVDF is successfully converted into MPCs with a high specific surface area and well-developed micropores. After CO{sub 2} activation, the specific surface areas of MPCs (CA-MPCs) are enhanced by 12% compared with non-activated MPCs. With increasing activation temperature, the micropore size distributions of A-MPCs also become narrower and shift to larger pore size. It is also confirmed that the CO{sub 2} activation had developed the micropores and introduced the oxygen-containing groups to MPCs′ surfaces. From the results, the specific capacitances of the electrodes in electric double layer capacitors (EDLCs) based on CA-MPCs are distinctly improved through CO{sub 2} activation. The highest specific capacitance of the A-MPCs activated at 700 °C is about 125 F/g, an enhancement of 74% in comparison with NA-MPCs, at a discharge current of 2 A/g in a 6 M KOH electrolyte solution. We also found that micropore size of 0.67 nm has a specific impact on the capacitance behaviors, besides the specific surface area of the electrode samples. - Graphical abstract: The A-MPC samples with high specific surface area (ranging from 1030 to 1082 m{sup 2}/g), corresponding to micropore sizes of 0.67 and 0.72 nm, and with the amount of oxygen-containing groups ranging from 3.2% to 4.4% have been evaluated as electrodes for EDLC applications. . Display Omitted - Highlights: • Microporous carbons (MPCs) were synthesized without activation process. • Next, we carried out the CO{sub 2} activation of MPCs with activation temperatures. • It had developed the micropores and introduced the O-functional groups to MPCs. • The highest specific capacitance: 125 F/g, an increase of 74% compared to MPCs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Luminescence of erbium ions in tellurite glasses

Optical characteristics of new generation of tellurite glasses having high stability against crystallization have been studied. As the initial reagents for the glasses synthesis on the base of tellurium oxide (TeO{sub 2}) there were used such oxides as WO{sub 3}, MoO{sub 3}, La{sub 2}O{sub 3}, Li{sub 2}CO{sub 3}, ZnO—Bi{sub 2}O{sub 2}CO{sub 3} and active components such as high purity Er{sub 2}O{sub 3}, Yb{sub 2}O{sub 3}, ErF{sub 3} and YbF{sub 3}. Intensities of luminescence at 1.53 µm of the erbium ions were determined after excitation at 975 nm. Experimental data obtained have shown the possibility to use the studied glasses doped by Er{sup 3+} and Yb{sup 3+} as active elements for fiber and integrated optics. - Graphical abstract: In contrast to the case of ZBLAN glass the TeO{sub 2}–WO{sub 3} (Er{sup 3+}) glass has bright intensity of luminescence at 1.53 µm for erbium ions that should be caused by excitation at 975 nm. Experimental data obtained have shown the possibility to use the studied glasses doped by Er{sup 3+} and Yb{sup 3+} as active elements for fiber and integrated optics. Display Omitted - Highlights: • We examined changes in growth of luminescence in doubly-doped tellurite glasses. • We found that luminescence grows in two orders by using Er{sup 3+} and Yb{sup 3+} at 1.53 μm. • We see possibility to use those glasses as active elements for integrated optics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigation of the hydrothermal crystallisation of the perovskite solid solution NaCe{sub 1−x}La{sub x}Ti{sub 2}O{sub 6} and its defect chemistry

Perovskites of nominal composition NaCe{sub 1−x}La{sub x}Ti{sub 2}O{sub 6} (0≤x≤1) crystallise directly under hydrothermal conditions at 240 °C. Raman spectroscopy shows distortion from the ideal cubic structure and Rietveld analysis of powder X-ray and neutron diffraction reveals that the materials represent a continuous series in rhombohedral space group R3-bar c. Ce L{sub III}-edge X-ray absorption near edge structure spectroscopy shows that while the majority of cerium is present as Ce{sup 3+} there is evidence for Ce{sup 4+}. The paramagnetic Ce{sup 3+} affects the chemical shift and line width of {sup 23}Na MAS NMR spectra, which also show with no evidence for A-site ordering. {sup 2}H MAS NMR of samples prepared in D{sub 2}O shows the inclusion of deuterium, which IR spectroscopy shows is most likely to be as D{sub 2}O. The deuterium content is highest for the cerium-rich materials, consistent with oxidation of some cerium to Ce{sup 4+} to provide charge balance of A-site water. - Graphical abstract: A multi-element A-site perovskite crystallises directly from aqueous, basic solutions at 240 °C; while the paramagnetic effect of Ce{sup 3+} on the {sup 23}Na NMR shows a homogeneous solid-solution, the incorporation of A-site water is also found from {sup 2}H NMR and IR, with oxidation of some cerium to charge balance proved by XANES spectroscopy. Display Omitted - Highlights: • Direct hydrothermal synthesis allows crystallisation of a perovskite solid-solution. • XANES spectroscopy shows some oxidation of Ce{sup 3+} to Ce{sup 4+}. • The paramagnetism of Ce{sup 3+} shifts and broadens the {sup 23}Na solid-state NMR. • The perovskite materials incorporate water as an A-site defect.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, magnetic and electric transport properties of mixed-valence manganites La{sub 0.5+x}Sr{sub 1.5−x}Mn{sub 0.5}Cr{sub 0.5}O{sub 4} (x=0.1, 0.2 and 0.3)

A series of mixed-valence manganites La{sub 0.5+x}Sr{sub 1.5−x}Mn{sub 0.5}Cr{sub 0.5}O{sub 4} were synthesized by sol–gel method. Rietveld profile analysis shows that the phases crystallize with tetragonal unit cell in the space group I4/mmm. The lattice parameter c increases with increase in x while a parameter almost remains constant. The Weiss constant (θ) is positive for all the phases and found to increase with increase in x. The ferromagnetic interactions becomes more dominant with increase in x due to increase in Mn{sup 3+}–O–Mn{sup 4+} and Mn{sup 3+}–O–Cr{sup 3+} double exchange interactions. Resistivity can be described by the polaron hopping and the variable range hopping model. It was found that the transport mechanism is dominated by Mott's variable range hopping (VRH) model with a decrease of Mott localization energy with increase in x, which explains the decrease of resistivity. - Graphical abstract: Unit cell structure of La{sub 0.6}Sr{sub 1.4}Mn{sub 0.5}Cr{sub 0.5}O{sub 4}. Display Omitted Research highlights: • A series of K{sub 2}NiF{sub 4}-type compounds La{sub 0.5}+xSr{sub 1.5-x}Mn{sub 0.5}Cr{sub 0.5}O{sub 4} (x=0.1, 0.2, 0.3) have been synthesized. • The calculated tolerance factors confirms the tetragonal symmetry of the proposed phases. • The lattice parameter c increases with increase in x while a parameter almost remains constant. • The Weiss constant (θ) is positive for all the phases and found to increase with increase in x • The resistivity data has been best fitted using the Mott's variable range hopping (VRH) model.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Upcoversion performance improvement of NaYF{sub 4}:Yb, Er by Sn codoping: Enhanced emission intensity and reduced decay time

In this manuscript we report a phenomenon that upconversion emission intensity of Er{sup 3+} was enhanced while decay time constant was decreased obviously by Sn codoping with Yb/Er into hexagonal NaYF{sub 4} synchronously. X-ray powder diffiraction, field emission scanning electron microscope, transmission electron microscopy, X-ray photoelectron spectroscopy, electron spin-resonance spectroscopy and upconversion emission spectra were employed to explore the relation of crystal structure and properties. From these characterizations we found that symmetry of the rare earth ion local crystal field could be tuned by different Sn codoping concentration. For the variable valence property of Sn the local crystal field asymmetry and emission intensity of NaYF{sub 4}:Yb, Er arrived to the maximum when 3 mol% Sn was codoped, while decay time was reduced. The study of this changing tends of upconversion emission intensity and decay time constant may be helpful for design and fabrication of high performance upconversion materials. - Graphical abstract: Variable-valenced Sn is introduced with Yb/Er into NaFY{sub 4} to tune structure and local crystal field. Upconversion emission intensity of Er{sup 3+} was enhanced while decay time constant was decreased. Display Omitted - Highlights: • NaYF{sub 4}: Yb, Er was codoped with different concentration Sn. • Upconversion emission intensity was enhanced while decay time constant was decreased. • Introduction of variable-valenced Sn is effective to tune structure and crystal field of NaFY{sub 4}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystal structure and electric properties of the organic–inorganic hybrid: [(CH{sub 2}){sub 6}(NH{sub 3}){sub 2}]ZnCl{sub 4}

The new organic-inorganic hybrid [(CH{sub 2}){sub 6}(NH{sub 3}){sub 2}]ZnCl{sub 4}, M{sub r}=325.406 crystallized in a triclinic, P1¯, a=7.2816 (5) Å, b=10.0996 (7) Å, c=10.0972 (7) Å, α=74.368 (4)°, β=88.046 (4)°, γ=85.974 (3)°, V=713.24 (9) Å{sup 3} and Z=2, D{sub x}=1.486 Mg m{sup −3}. Differential thermal scanning and x-ray powder diffraction, permittivity and ac conductivity indicated three phase transitions. Conduction takes place via correlated barrier hopping. - Graphical abstract: Display Omitted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

New iodocuprates(I) with N-heterocyclic molecules as the cations

Under the hydrothermal conditions, the reactions between CuI, KI and bp/bpp (bp=4,4′-bipiperidine, bpp=1,3-bis(4-piperidyl)propane) in an acidic alcohol solution produced three new organically templated iodocuprates(I) as [H{sub 2}bp]{sub 2}[Cu{sub 2}I{sub 6}] 1, [tmbp][Cu{sub 2}I{sub 4}] 2 and [tmbpp] 2 [Cu{sub 4}I{sub 8}]·2H{sub 2}O 3 (tmbp{sup 2+}=N,N,N′,N′-tetramethyl-4,4′-bipiperidinium; tmbpp{sup 2+}=N,N,N′,N′-tetramethyl-1,3-bis(4-piperidyl)propane dication). X-ray analysis revealed that (i) tmbp{sup 2+} and tmbpp{sup 2+} in compounds 2 and 3 originated from the complete N-alklation of bp/bpp with CH{sub 3}OH; (ii) templated by H{sub 2}bp{sup 2+}, the inorganic anion [Cu{sub 2}I{sub 6}]{sup 2−} of 1 possesses a dinuclear structure, whereas templated by tmbp{sup 2+}, the inorganic anion [Cu{sub 2}I{sub 4}]{sup 2−} of 2 exhibits a one-dimensional (1D) chain structure; (iii) templated by tmbpp{sup 2+}, the inorganic anion [Cu{sub 4}I{sub 8}]{sup 4−} of 3 shows a cubane-like structure modified by four terminal I{sup −} ions. The photoluminescence analysis indicates that compounds 1 and 2 emit blue light, while compound 3 emits green light. - Graphical abstract: By employing hydrothermal in situ N-alkylation of bp/bpp with CH{sub 3}OH, three new organically templated iodocuprates(I) were obtained. Display Omitted - Highlights: • Three new organically templated iodocuprates(I) were reported. • Cations tmbp{sup 2+} and tmbpp{sup 2+} originated from in situ alkylation of bp/bpp with CH{sub 3}OH. • H{sup +} and I{sup −} play a key role in alkylation of bp/bpp with CH{sub 3}OH. • Photoluminescence emission for iodocuprates(I) is related to Cu···Cu interaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗