Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Nonlinear responses”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Understanding Recombination Pathways of CdSeTe/CdTe Devices Using Temperature Dependence of Fill Factor

Understanding the temperature dependence of photovoltaic parameters is critical for identifying performance limiting mechanisms in CdTe-based solar cells. In this study, we investigate the temperature dependence of fill factor (FF(T)) in CdSeTe/CdTe solar cells using a combination of experimental current density-voltage (JV) measurements and numerical simulations. The measured FF(T) exhibits a nonlinear response with temperature, peaking at moderate temperature values (10–30°C). Through numerical modeling, we reveal that this peaking behavior in FF(T) arises when the dominant recombination mechanism transitions from bulk to interface with increasing temperature. This transition is primarily driven by low hole mobility (0.6–1.2 cm2/V·s), while electron mobility, interface recombination velocities, and carrier lifetime also contribute to the effect. Our findings demonstrate that FF(T) analysis is a promising diagnostic tool for distinguishing recombination pathways and guiding the optimization of thin-film CdTe solar cells under real-world conditions.

CdTe photovoltaics↗

CheKiPEUQ Intro 2: Harnessing Uncertainties from Data Sets, Bayesian Design of Experiments in Chemical Kinetics**

When choosing experimental conditions, Bayesian statistical tools can predict the experimental choices which will yield the highest information gain. Experimental choices could be temperature, pressure, reaction time, number of measurements, reactor volume, etc.. Three example analyses are presented here, each using the software Chemical Kinetics Parameter Estimation and Uncertainty Quantification (CheKiPEUQ). Information gain is a measure of reduction of uncertainty in a model's parameters. The three chemical system examples presented each illustrate Bayesian Design of Experiments using information gain. In the first chemical example, temperature selection impacts the information gain for the free energy of reaction in a two-component equilibrium reaction. In the second example, temperature and pressure are explored for a competitive adsorption Langmuir replacement reaction system. Finally, the third example is a catalytic membrane reactor which is a culmination of the previous examples. The catalytic membrane reactor has a complex and nonlinear response in the observables which is solved by numerical evaluation. In the three examples, the experimental conditions are treated as design variables for maximizing information gain.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Autoignition study of binary blends of n- dodecane/1-methylnaphthalene and iso- cetane/1-methylnaphthalene

An experimental study on autoignition of two binary blends, n-dodecane/1-methylnaphthalene and iso-cetane/1-methylnaphthalene, has been conducted using a rapid compression machine. Specifically, the ignition delays of the stoichiometric blend+air mixtures were measured at elevated pressures of P C = 15 bar and 30 bar, compressed temperatures of T C = 626–944 K, and varying blending ratios of the constituents. For a given set of P C and T C , a nonlinear response of the blend reactivity with respect to the relative amount of the constituents was observed. Since a comprehensive chemical kinetic model for the blends investigated here is under development, the current ignition delay datasets serve as the needed targets for model validation. For selected conditions, ignition delay simulations were conducted to highlight and discuss the deficiencies of the literature models and the potential areas for model improvements, especially at low temperatures. In conclusion, further chemical kinetic analyses were conducted to gain understanding of the blending behavior predicted by the available model.

1-methylnaphthalene↗

Stochastic nonlinear analysis of unidirectional fiber composites using image-based microstructural uncertainty quantification

Here, we present a data-driven nonlinear uncertainty quantification and propagation framework to study the microstructure-induced stochastic performance of unidirectional (UD) carbon fiber reinforced polymer (CFRP) composites. The proposed approach integrates (1) microscopic image characterization, (2) stochastic microstructure reconstruction, and (3) efficient multiscale finite element simulations enabled by self-consistent clustering (SCA) analysis. To model the complex microstructural variability, the proposed UQ methods take the non-Gaussian uncertainty sources into account through a distribution-free sampling approach leveraging nonparametric and asymptotic statistical tools. A hierarchical conditional sampling strategy enables the simultaneous sampling of multiple sources of uncertainties. Our approach provides insights into the impact of microstructural variabilities, which are shown to have an increasing impact on the nonlinear responses of UD CFRP parts under progressive compression loading and ultimately on the failure rate over time. We discover that before CFRP parts start to fail, a characteristic time period emerges with distinctive uncertainty distributions specific to the microstructure variability and the probability of failure. Identifying the failure time period is crucial to the reliability prediction, which is an essential component of CFRP design.

36 MATERIALS SCIENCE↗

On the variable effects of climate change on Pacific salmon

Pacific salmon are sensitive to changes in water temperature and streamflow. Climate change and water management may alter the streamflow and temperature regimes to which local species have adapted, hence affecting the survival and growth of juvenile salmon. This study estimates the changes in smolt survival rates of Chinook (Oncorhynchus tshawytscha) and Steelhead (Oncorhynchus mykiss) in Columbia River Basin (CRB) due to climatic changes and water management practices (reservoir regulation and water extraction). A multivariate nonlinear regression model is developed between juvenile survival rate and streamflow as well as stream temperature, and incorporates the inherent nonlinearity between survival rate and stream temperature. Using streamflow and stream temperature simulations from a state-of-the-art integrated earth system model, results indicate that climatic changes may reduce basin average juvenile Steelhead survival rates and smolt Chinook survival in Snake River by the 2080s. Water management, on the other hand, can alleviate the reduction in Chinook and Steelhead survival rates induced by climate change through mitigation of stream temperature warming. Integration of the nonlinear response of survival rate to stream temperature in addition to considering water management impacts on streamflow and temperature reduces the overestimate of the negative impacts from climate change. Furthermore, stream warming likely benefits juvenile survival in areas where the current stream temperature is lower than the optimal temperature zone. Our findings add new insights on climate and human impacts on juvenile salmon survival in CRB that are useful for conservation planning.

Zhang, Xiao↗

Characterization of laboratory-scale hydraulic fracturing for EGS

To investigate the impact of reservoir stimulation by hydraulic fracturing, a series of advanced lab-scale block tests were conducted with multiple measurement methods to characterize the fracture and to assess the operation and the performance of an enhanced or engineered geothermal system (EGS). The stimulation test samples were 330-mm cubic blocks of Sierra White granite with one injection well and four producers drilled into it. Acoustic emissions generated during the fracture initiation and propagation were monitored with twenty AE sensors mounted on all sides of the block to help characterize the fracture initiation and propagation process. The recorded AE signals were analyzed to obtain the event location and the failure mechanism. The localized AE events shows that due to the low viscosity of the fracturing fluid (water), the fracture propagated rapidly and took only about 1.4 s to reach near the block surface. During the fracturing phase, about 47 percent of the events were determined to be shear/mixed mode failure events, 28 percent tensile failure events, and 25 percent compressional failure events. Just after the simulation, a step-rate (constant flowrate) injection test was carried out to investigate the reservoir injectivity enhancement. During this phase additional compressional failure events were observed and the percentages of tensile failure and shear/mixed mode failure decreased. The dramatic increase of the injection rate with small increments of the injection pressure demonstrates the nonlinear response of the fracture to effective normal stress variation with much higher fracture opening increase during the low effective normal stress interval. Hydraulic fracturing tests under different stress levels show that more AE hits/events are recorded when the rock block is under higher applied stress. The reconstructed 3D fracture geometry shows good agreement with the AE monitoring results. After fracturing, a tracer test was carried out and the fracture aperture was estimated to be around 139 μm. The tracer recovery curve shows two linear portions of the tracer tail on a semi-log plot similar to that observed in some field data and predicted by numerical modeling. Laser scanning of the fracture surfaces indicates that the induced fracture has a rough surface with a joint roughness coefficient (JRC) of 12.98 and tortuosity of 1.10, both of which are slightly larger than that from the Brazilian test fracture on the same rock. The thin section and SEM observations show that the fracture follows the weak boundaries between the Quartz and Albite grains or the weak beddings in the grains.

58 GEOSCIENCES↗

Enhanced harmonic generation accompanying Ferromagnetic resonance in thin permalloy elliptical disks

Throughout this work, large amplitude magnetization dynamics in elliptical permalloy nano-disks are studied via simulation of the Landau-Lifshitz equation. When the external magnetic field is applied in the plane of the disk two low-lying resonant modes exist. The higher frequency mode corresponds to the Kittel-like uniform ferromagnetic resonance mode and is consistent with previous experimental observations. The second mode with the lower frequency, termed the "cap mode", is localized near the two ends of the ellipse. At certain fields the ratio of the frequencies of these modes is equal to two or three and here one can efficiently generate the Kittel mode as the 2nd or 3rd harmonic of the "cap mode" when the magnitude of the input microwave field is of order 0.1 Oe, which can easily be achieved in practice. The nonlinear responses depend strongly on the equilibrium, field-dep-endent, behavior of the magnetization which is non-uniform and displays features not captured by the Stoner-Wohlfarth model for an ellipsoid.

36 MATERIALS SCIENCE↗

Damage mechanics modeling of the non-linear behavior of SiC/SiC ceramic matrix composite fuel cladding

A damage model is developed and validated with experimental data for the non-linear mechanical behavior of SiC/SiC composite materials in nuclear applications. The model extends a continuum damage mechanics formalism, where explicit property degradation and volumetric swelling as a result of neutron irradiation are additionally included. The model is shown to be validated with out-of-pile experiments, and then applied to off-normal and high-burnup operating conditions associated with loss of cooling and extended radiation exposure, respectively. Optimized operating conditions aimed at reducing the fuel temperature included variation of the thermal conductivity and initial fuel-cladding gap thermal resistance. The nonlinear response along with continuum micro-cracking damage predictions are obtained and compared to the behavior during normal operating conditions. Numerical implementation of the model is based on 3-D Finite Element solutions.

36 MATERIALS SCIENCE↗

The electronic structures of vanadate salts: Cation substitution as a tool for band gap manipulation

The electronic structures of six ternary metal oxides containing isolated vanadate ions, Ba{sub 3}(VO{sub 4}){sub 2}, Pb{sub 3}(VO{sub 4}){sub 2}, YVO{sub 4}, BiVO{sub 4}, CeVO{sub 4} and Ag{sub 3}VO{sub 4} were studied using diffuse reflectance spectroscopy and electronic structure calculations. While the electronic structure near the Fermi level originates largely from the molecular orbitals of the vanadate ion, both experiment and theory show that the cation can strongly influence these electronic states. The observation that Ba{sub 3}(VO{sub 4}){sub 2} and YVO{sub 4} have similar band gaps, both 3.8 eV, shows that cations with a noble gas configuration have little impact on the electronic structure. Band structure calculations support this hypothesis. In Pb{sub 3}(VO{sub 4}){sub 2} and BiVO{sub 4} the band gap is reduced by 0.9-1.0 eV through interactions of (a) the filled cation 6s orbitals with nonbonding O 2p states at the top of the valence band, and (b) overlap of empty 6p orbitals with antibonding V 3d-O 2p states at the bottom of the conduction band. In Ag{sub 3}VO{sub 4} mixing between filled Ag 4d and O 2p states destabilizes states at the top of the valence band leading to a large decrease in the band gap (E{sub g}=2.2 eV). In CeVO{sub 4} excitations from partially filled 4f orbitals into the conduction band lower the effective band gap to 1.8 eV. In the Ce{sub 1-x}Bi{sub x}VO{sub 4} (0<=x<=0.5) and Ce{sub 1-x}Y{sub x}VO{sub 4} (x=0.1, 0.2) solid solutions the band gap narrows slightly when Bi{sup 3+} or Y{sup 3+} are introduced. The nonlinear response of the band gap to changes in composition is a result of the localized nature of the Ce 4f orbitals. - Graphical abstract: The electronic structures of six vanadate salts, Ba{sub 3}(VO{sub 4}){sub 2}, Pb{sub 3}(VO{sub 4}){sub 2}, YVO{sub 4}, BiVO{sub 4}, Ag{sub 3}VO{sub 4} and CeVO{sub 4}, are studied. The results show that the oxygen to vanadium charge transfer, which is largely responsible for the electronic structure near the Fermi level, can be altered significantly through interactions with the surrounding cations.

36 MATERIALS SCIENCE↗

Effects of Salt on Phase Behavior and Rheological Properties of Alginate–Chitosan Polyelectrolyte Complexes

Oppositely charged polyelectrolytes often form polyelectrolyte complexes (PECs) due to the association through electrostatic interactions. Obtaining PECs using natural, biocompatible polyelectrolytes is of interest in the food, pharmaceutical, and biomedical industries. In this work, PECs were prepared from two biopolymers, positively charged chitosan and negatively charged alginate. We investigate the changes in the structure and properties of PECs by adding sodium chloride (salt doping) to the system. The shear modulus of PECs can be tuned from ~10 to 10 4 Pa by changing the salt concentration. The addition of salt led to a decrease in the water content of the complex phase with increasing shear modulus. However, at a very high salt concentration, the shear modulus of the complex phase decreased but did not lead to the liquid coacervate formation, typical of synthetic polyelectrolytes. This difference in phase behavior has likely been attributed to the hydrophobicity of chitosan and long semiflexible alginate and chitosan chains that restrict the conformational changes. Large amplitude oscillatory shear experiments captured nonlinear responses of PECs. The compositions of the PECs, determined as a function of salt concentration, signify the preferential partitioning of salt into the complex phase. Small-angle X-ray scattering of the salt-doped PECs indicates that the Kuhn length and radius of the alginate–chitosan associated structure qualitatively agree with the captured phase behavior and rheological data. This study provides insights into the structure–property as a function of salt concentration of natural polymer-based PECs necessary for developing functional materials from natural polyelectrolytes.

59 BASIC BIOLOGICAL SCIENCES↗

Hydrological Controls on Riverbed Methane Emissions: A Numerical Investigation of Hydrodynamic and Ebullitive Mechanisms from Site to Basin Scales

Methane production and emission from riverbed sediments constitute a significant yet underexplored component of the river methane budget. Despite their importance, a mechanistic and quantitative understanding of these processes under dynamic flow conditions remains elusive, particularly at the basin scale. In this study, we investigate the multiscale (site-to-basin) mechanisms governing methane emissions from riverbeds, focusing on the interplay between biogeochemical processes and hydrological dynamics. We developed a reactive transport model that integrates methane production with hydrodynamic and ebullitive pathways and coupled it with a basin-scale groundwater flow model to simulate methane emissions across scales. By incorporating key factors such as vertical hydrological exchange flow (VHEF), particulate organic carbon availability, sediment properties, and temperature sensitivity, our model captures the spatiotemporal variability of methane ebullition at both the site and basin scales. Our results reveal that methane ebullition is strongly modulated by VHEF, with lower flow rates promoting methane accumulation and subsequent ebullition. Sensitivity analyses underscore nonlinear responses of methane fluxes to environmental drivers. Furthermore, these findings emphasize the critical roles of sediment composition, hydrological exchange, and environmental conditions in shaping methane dynamics. Overall, this work advances our understanding of riverine methane emissions and offers insights for guiding climate models and mitigation strategies.

Fluxes↗

Ultrafast Dynamics of Excited Electronic States in Nitrobenzene Measured by Ultrafast Transient Polarization Spectroscopy

We investigate ultrafast dynamics of the lowest singlet excited electronic state in liquid nitrobenzene using ultrafast transient polarization spectroscopy, extending the well-known technique of optical Kerr effect spectroscopy to excited electronic states. The third-order nonlinear response of the excited molecular ensemble is measured using a pair of femtosecond pulses following a third femtosecond pulse that populates the S 1 excited state. By measuring this response, which is highly sensitive to details of the excited state character and structure, as a function of time delays between the three pulses involved, we extract the dephasing time of the wave packet on the excited state. The dephasing time, measured as a function of time delay after pump excitation, shows oscillations indicating oscillatory wave packet dynamics on the excited state. Finally, from the experimental measurements and supporting theoretical calculations, we deduce that the wave packet completely leaves the S 1 state potential energy surface after three traversals of the intersystem crossing between the singlet S 1 and triplet T 2 states.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ionic Conductivity in Polyelectrolyte Hydrogels

Transport of ionic species in heterogeneous polymeric media is highly dependent on the charge distributions and interactions between mobile and immobile groups. Here we perform coarse-grained molecular dynamics simulations to study the ion dynamics in swollen polyelectrolyte gels under external electric fields. A nonlinear response of the ionic conductivity to an applied electric field, for field strengths that are comparable to the ionic coupling strength, is observed. This behavior correlates to a broadening of the ionic distribution around the polymer backbone under an increasing electric field. Also, we find that the weak-field ionic mobility in gels increases with density, which is opposite to the behavior of simple electrolytes. This relates to the mean coupling between charges that decreases in gels, but increases in simple electrolytes, with increasing density. These results provide more insights into the electric response of polyelectrolyte gels to support the development of applications that combine electric and mechanical properties of polyelectrolyte gels for energy storage, sensing, selective transport, and signal transfer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Plasmonic interactions and optical forces between Au bypyramidal nanoparticle dimers.

Interparticle forces that can be driven by applied (optical) fields could lead to the formation of new particle arrangements when assembled in arrays. Furthermore, the potentially large interactions and large local fields associated with plasmon excitations in anisotropic nanoparticles can lead to enhanced nonlinear responses and applications for sensing. These and other applications would benefit from simulations of spectra and forces arising from plasmonic interactions. We present the results of rigorous three-dimensional, finite-difference, time-domain calculations of near- and far-field properties of pairs of Au bipyramidal nanoparticles in three different configurations: side-by-side, head-to-tail, and face-on. The absorption and scattering spectra depend strongly on the geometry as well as on the interparticle separation, as intuitively expected from a dipole coupling picture. Bipyramidal dimers in head-to-tail and face-on geometries exhibit an increasingly red-shifted (longitudinal) plasmon resonance with decreasing separation, whereas side-by-side dimers exhibit a blue shift. Large resonant field enhancements at the gap between particles in a head-to-tail configuration indicate the strong coupling of plasmonic modes. The Maxwell stress tensor formalism is employed to calculate the optical force one particle exerts on the other. Both significant attraction and weak repulsion can be obtained, depending on the relative arrangement of the particles. The force between bipyramids in the head-to-tail configuration can be greater than 10 times the force between pairs of Au nanospheres with the same volume. Experimental linear scattering spectra of particles trapped using the plasmon-resonance-based optical trapping method are found to be consistent with two particles trapped in the side-by-side configuration.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Controlling plasmonic wave packets in silver nanowires.

Three-dimensional finite-difference time-domain simulations were performed to explore the excitation of surface plasmon resonances in long silver (Ag) nanowires. In particular, we show that it is possible to generate plasmonic wave packets that can propagate along the nanowire by exciting superpositions of surface plasmon resonances. By using an appropriately chirped pulse, it is possible to transiently achieve localization of the excitation at the distal end of the nanowire. Such designed coherent superpositions will allow realizing spatiotemporal control of plasmonic excitations for enhancing nonlinear responses in plasmonic 'circuits'.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Intensified Soil Moisture Extremes Decrease Soil Organic Carbon Decomposition: A Mechanistic Modeling Analysis

Earth system models have predicted that there will be more frequent and severe precipitation and drought events in terrestrial ecosystems. Microbially mediated decomposition of soil organic carbon (SOC) tends to increase as soils wet and decrease as soils dry. However, the long-term SOC change under intensified moisture extremes remains poorly known as it depends on the frequency and intensity of soil drying and wetting. In this study, we explored long-term SOC dynamics under scenarios of alternating drying-wetting cycles using the Microbial-ENzyme Decomposition model, a mechanistic microbial model. The model was parameterized with 11 years of observations from a temperate deciduous broadleaf forest site, showing satisfactory model performance in both model calibration (R 2 = 0.67) and validation (R 2 = 0.69) against heterotrophic respiration. We then used the model to simulate the long-term SOC dynamics under five scenarios of alternating drying-wetting cycles with different frequencies and severities over a period of 100 years. Results showed that the changes in active microbial biomass C and the corresponding turnover rates of SOC pools were more sensitive to soil drying than soil wetting. As a result, the cumulative soil carbon emission from microbial respiration decreased by 433.7 g C m -2 after the 100-year simulation in the highest frequency and intensity moisture scenario, but was not significantly affected by the lowest frequency and intensity scenario. This study emphasizes the nonlinear response of SOC decomposition to soil moisture changes, which causes decreased decomposition by microbes under drying that is, not compensated by increased decomposition under wetting conditions.

58 GEOSCIENCES↗

Hierarchical Testing of a Hybrid Machine Learning‐Physics Global Atmosphere Model

Machine learning (ML)-based models have demonstrated high skill and computational efficiency, often outperforming conventional physics-based models in weather and subseasonal predictions. While prior studies have assessed their fidelity in capturing synoptic-scale atmospheric dynamics, their performance across timescales and under out-of-distribution forcing, such as +3K or +4K uniform-warming forcings, and the sources of biases remain elusive, to establish the model's reliability for Earth science. Here, we design three sets of experiments targeting synoptic-scale phenomena, interannual variability, and out-of-distribution uniform-warming forcings. We evaluate the Neural General Circulation Model (NeuralGCM), a hybrid model integrating a dynamical core with ML-based component, against observations and physics-based Earth system models (ESMs). At the synoptic scale, NeuralGCM captures the evolution and propagation of extratropical cyclones with performance comparable to ESMs. At the interannual scale, when forced by El Niño-Southern Oscillation sea surface temperature (SST) anomalies, NeuralGCM successfully reproduces associated teleconnection patterns but exhibits deficiencies in capturing nonlinear response. Under out-of-distribution uniform-warming forcings, NeuralGCM simulates similar responses in global-average temperature and precipitation and reproduces large-scale tropospheric circulation features similar to those in ESMs. Notable weaknesses include overestimating the tracks and spatial extent of extratropical cyclones, biases in the teleconnected wave train triggered by tropical SST anomalies, and differences in upper-level warming and stratospheric circulation responses to SST warming compared to physics-based ESMs. The causes of these weaknesses were explored. Despite the noted weaknesses, NeuralGCM reproduces responses across experiments reasonably and performs comparably to ESMs. By integrating a dynamical core with ML, NeuralGCM shows potential for developing ML-based ESMs.

global warming↗

Unraveling quantum pathways using optical 3D Fourier-transform spectroscopy

Predicting and controlling quantum mechanical phenomena require knowledge of the system Hamiltonian. A detailed understanding of the quantum pathways used to construct the Hamiltonian is essential for deterministic control and improved performance of coherent control schemes. In complex systems, parameters characterizing the pathways, especially those associated with inter-particle interactions and coupling to the environment, can only be identified experimentally. Quantitative insight can be obtained provided the quantum pathways are isolated and independently analysed. Here we demonstrate this possibility in an atomic vapour using optical three-dimensional Fourier-transform spectroscopy. By unfolding the system’s nonlinear response onto three frequency dimensions, three-dimensional spectra unambiguously reveal transition energies, relaxation rates and dipole moments of each pathway. The results demonstrate the unique capacity of this technique as a powerful tool for resolving the complex nature of quantum systems. This experiment is a critical step in the pursuit of complete experimental characterization of a system’s Hamiltonian.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗