SEARCH · Engineering Papers

Results for “Nonlinear filtering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

All sources NASA NTRS DOE OSTI

NASA NTRS1972

Identification of rotating assembly inertial and bearing parameters.

The problem of estimating the state of a turbopump rotating assembly and identifying unknown products of inertia and unknown bearing parameters is considered. A linearized, extended Kalman filtering approach has been used and found to be successful for both state estimation and parameter identification in an inherently nonlinear problem. The input data were simulated Bently test data obtained from a verified 12-dimensional state-space model and were compared with real Bently test data obtained from NASA. The results prove the feasibility of using this model and this type of test data to obtain the hidden parameters of a typical turbopump rotating assembly.

Alspach, D. L.↗

NASA NTRS1976

Specific failure identification algorithms for the F-8

Analytical redundancy is applied to the pitch axis of an aircraft to enhance sensor fault detection. Three different designs based on monitoring Kalman filter residuals or likelihood functions were developed. Sensor failures were simulated to evaluate the performance of the algorithms on a nonlinear simulation of an F-8C aircraft. Based on requirements for sensor fault detection and preliminary simulator performance it is concluded that these algorithms have the potential for reducing the level of sensor redundancy in a digital flight control system without compromising performance.

Hartmann, G. L.↗

NASA NTRS1983

Pfaffian systems and feedback linearization/obstructions

The concept of Cartan-Vessiot filtered Lie algebra/module is defined in terms of previous feedback linearizations constructed through canonical forms of Pfaffian systems associated with nonlinear systems. Nonlinearization/Cartan-Vessiot algebras are regarded as deformations of linear ones. It is shown how certain problems of interest in nonlinear system theory translate over to algebraic problems involving this sort of algebraic structure.

Hermann, R.↗

NASA NTRS2011

Intelligent Control for Drag Reduction on the X-48B Vehicle

This paper focuses on the development of an intelligent control technology for in-flight drag reduction. The system is integrated with and demonstrated on the full X-48B nonlinear simulation. The intelligent control system utilizes a peak-seeking control method implemented with a time-varying Kalman filter. Performance functional coordinate and magnitude measurements, or independent and dependent parameters respectively, are used by the Kalman filter to provide the system with gradient estimates of the designed performance function which is used to drive the system toward a local minimum in a steepestdescent approach. To ensure ease of integration and algorithm performance, a single-input single-output approach was chosen. The framework, specific implementation considerations, simulation results, and flight feasibility issues related to this platform are discussed.

Griffin, Brian Joseph↗

DOE OSTI2014

Force-controlled absorption in a fully-nonlinear numerical wave tank

An active control methodology for the absorption of water waves in a numerical wave tank is introduced. This methodology is based upon a force-feedback technique which has previously been shown to be very effective in physical wave tanks. Unlike other methods, an a-priori knowledge of the wave conditions in the tank is not required; the absorption controller being designed to automatically respond to a wide range of wave conditions. In comparison to numerical sponge layers, effective wave absorption is achieved on the boundary, thereby minimising the spatial extent of the numerical wave tank. In contrast to the imposition of radiation conditions, the scheme is inherently capable of absorbing irregular waves. Most importantly, simultaneous generation and absorption can be achieved. This is an important advance when considering inclusion of reflective bodies within the numerical wave tank. In designing the absorption controller, an infinite impulse response filter is adopted, thereby eliminating the problem of non-causality in the controller optimisation. Two alternative controllers are considered, both implemented in a fully-nonlinear wave tank based on a multiple-flux boundary element scheme. To simplify the problem under consideration, the present analysis is limited to water waves propagating in a two-dimensional domain. The paper presents an extensive numerical validation which demonstrates the success of the method for a wide range of wave conditions including regular, focused and random waves. The numerical investigation also highlights some of the limitations of the method, particularly in simultaneously generating and absorbing large amplitude or highly-nonlinear waves. The findings of the present numerical study are directly applicable to related fields where optimum absorption is sought; these include physical wavemaking, wave power absorption and a wide range of numerical wave tank schemes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2022

An improved framework for the dynamic likelihood filtering approach to data assimilation

Here, we propose improvements to the Dynamic Likelihood Filter (DLF), a Bayesian data assimilation filtering approach, specifically tailored to wave problems. The DLF approach was developed to address the common challenge in the application of data assimilation to hyperbolic problems in the geosciences and in engineering, where observation systems are sparse in space and time. When these observations have low uncertainties, as compared to model uncertainties, the DLF exploits the inherent nature of information and uncertainties to propagate along characteristics to produce estimates that are phase aware as well as amplitude aware, as would be the case in the traditional data assimilation approach. Along characteristics, the stochastic partial differential equations underlying the linear or nonlinear stochastic dynamics are differential equations. This study focuses on developing the explicit challenges of relating dynamics and uncertainties in the Eulerian and Lagrangian frames via dynamic Gaussian processes. It also implements the approach using the ensemble Kalman filter (EnKF) and compares the DLF approach to the conventional one with respect to wave amplitude and phase estimates in linear and nonlinear wave problems. Numerical comparisons show that the DLF/EnKF outperforms the EnKF estimates, when applied to linear and nonlinear wave problems. This advantage is particularly noticeable when sparse, low uncertainty observations are used.

97 MATHEMATICS AND COMPUTING↗

NASA NTRS1972

Nonlinear estimation theory applied to the interplanetary orbit determination problem.

Martingale theory and appropriate smoothing properties of Loeve (1953) have been used to develop a modified Gaussian second-order filter. The performance of the filter is evaluated through numerical simulation of a Jupiter flyby mission. The observations used in the simulation are on-board measurements of the angle between Jupiter and a fixed star taken at discrete time intervals. In the numerical study, the influence of each of the second-order terms is evaluated. Five filter algorithms are used in the simulations. Four of the filters are the modified Gaussian second-order filter and three approximations derived by neglecting one or more of the second-order terms in the equations. The fifth filter is the extended Kalman-Bucy filter which is obtained by neglecting all of the second-order terms.

Tapley, B. D.↗

NASA NTRS1979

Flight test evaluation of a digital controller used in a VTOL automatic approach and landing system

As part of the NASA Langley Research Center's effort to develop technology for VTOL operation in the air transportation system in the late 1980's and beyond, research has been conducted aimed at developing digital controller design procedures. This paper describes the verification of one design procedure by the flight evaluation of an advanced digital control algorithm. The control algorithm, operating at 10 iterations per second, follows step guidance commands with zero steady state error and thus provides an autotrim capability for the nonlinear vehicle. Changes in vehicle dynamics are accounted for using a gain scheduling technique. This control algorithm is combined with sensor filters, a trajectory generator, and a closed loop guidance algorithm to form a VTOL autoland system. A CH-47 tandem rotor helicopter which contains a set of sensors, onboard digital flight computers and electro-hydraulic actuators is used in the evaluation. All software, except input-output routines, is coded in FORTRAN using floating point arithmetic and executed in the flight computer. This autoland system is exercised by automatically flying straight-in descending decelerating trajectories typical of VFR manual approaches to a predetermined landing pad.

Downing, D. R.↗

NASA NTRS1992

Recent advances in superconducting-mixer simulations

Over the last few years, considerable progress have been made in the development of techniques for fabricating high-quality superconducting circuits, and this success, together with major advances in the theoretical understanding of quantum detection and mixing at millimeter and submillimeter wavelengths, has made the development of CAD techniques for superconducting nonlinear circuits an important new enterprise. For example, arrays of quasioptical mixers are now being manufactured, where the antennas, matching networks, filters and superconducting tunnel junctions are all fabricated by depositing niobium and a variety of oxides on a single quartz substrate. There are no adjustable tuning elements on these integrated circuits, and therefore, one must be able to predict their electrical behavior precisely. This requirement, together with a general interest in the generic behavior of devices such as direct detectors and harmonic mixers, has lead us to develop a range of CAD tools for simulating the large-signal, small-signal, and noise behavior of superconducting tunnel junction circuits.

Withington, S.↗

NASA NTRS1993

Cancellation control law for lateral-directional dynamics of a supermaneuverable aircraft

Cancellation control laws are designed which reduce the high levels of lateral acceleration encountered during aggressive rolling maneuvers executed at high angle of attack. Two independent problem are examined. One is to reduce lateral acceleration at the mass center, while the other focuses on lateral acceleration at the pilot's station, located 7.0 m forward of the mass center. Both of these problems are challenging and somewhat different in their limitations. In each case the design is based on a linearization of the lateral-directional dynamics about a high angle of attack condition. The controllers incorporate dynamic inversion inner loops to provide control of stability-axis roll- and yaw-rates and then employ cancellation filters in both feed-forward and feed-back signal paths. The relative simplicity of the control laws should allow nonlinear generalizations to be devised. Although it is shown that lateral acceleration can be reduced substantially by such control laws, this is at the cost of slowed roll response, poor dutch-roll damping or a combination of the two.

Snell, Antony↗

NASA NTRS2001

Data Reduction and Its Impact on Test-Analysis Correlation

A research project has been initiated to improve crash test and analysis correlation. The research has focused on two specimen types: simple metallic beams and plates; and a representative composite fuselage section. Impact tests were performed under carefully controlled conditions. In addition, the specimens were densely instrumented to enable not only correlation with finite element simulations, but to also assess the repeatability of the data. Simulations utilizing a detailed finite element model were executed in a nonlinear transient dynamic code. The results presented in this paper concentrate on the effect of several data reduction processes, to include filtering frequency and sampling rate, on the correlation accuracy.

Lyle, Karen H.↗

NASA NTRS2007

NASA Tech Briefs, November 2007

Topics include: Wireless Measurement of Contact and Motion Between Contact Surfaces; Wireless Measurement of Rotation and Displacement Rate; Portable Microleak-Detection System; Free-to-Roll Testing of Airplane Models in Wind Tunnels; Cryogenic Shrouds for Testing Thermal-Insulation Panels; Optoelectronic System Measures Distances to Multiple Targets; Tachometers Derived From a Brushless DC Motor; Algorithm-Based Fault Tolerance for Numerical Subroutines; Computational Support for Technology- Investment Decisions; DSN Resource Scheduling; Distributed Operations Planning; Phase-Oriented Gear Systems; Freeze Tape Casting of Functionally Graded Porous Ceramics; Electrophoretic Deposition on Porous Non- Conductors; Two Devices for Removing Sludge From Bioreactor Wastewater; Portable Unit for Metabolic Analysis; Flash Diffusivity Technique Applied to Individual Fibers; System for Thermal Imaging of Hot Moving Objects; Large Solar-Rejection Filter; Improved Readout Scheme for SQUID-Based Thermometry; Error Rates and Channel Capacities in Multipulse PPM; Two Mathematical Models of Nonlinear Vibrations; Simpler Adaptive Selection of Golomb Power-of- Two Codes; VCO PLL Frequency Synthesizers for Spacecraft Transponders; Wide Tuning Capability for Spacecraft Transponders; Adaptive Deadband Synchronization for a Spacecraft Formation; Analysis of Performance of Stereoscopic-Vision Software; Estimating the Inertia Matrix of a Spacecraft; Spatial Coverage Planning for Exploration Robots; and Increasing the Life of a Xenon-Ion Spacecraft Thruster.

Source record↗

DOE OSTI2024

Wind turbine power phase control with DC collection bus for onshore/offshore windfarms

A DC bus collection system for a wind farm reduces the overall required number of converters and minimizes the energy storage system requirements. The DC bus collection system implements a power phasing control method between wind turbines that filters the variations and improves power quality. The phasing control method takes advantage of a novel power packet network concept with nonlinear power flow control design techniques that guarantees both stable and enhanced dynamic performance.

Weaver, Wayne W.↗

DOE OSTI2018

Investigation of a Solid-State Tuning Behavior in Lithium Niobate

Electric field-based frequency tuning of acoustic resonators at the material level provides an enabling technology for building complex tunable filters. Tunable acoustic resonators were fabricated in thin plates (h/λ ~ 0.05) of X-cut lithium niobate (90°, 90°, ψ = 170°). Lithium niobate is known for its large electromechanical coupling (SH: K 2 40%) and thus applicability for low-insertion loss and wideband filter applications. We demonstrate the effect of a DC bias to shift the resonant frequency by ~0.4% by directly tuning the resonator material. The mechanism is based on the nonlinearities that exist in the piezoelectric properties of lithium niobate. Devices centered at 332 MHz achieved frequency tuning of 12 kHz/V through application of a DC bias.

47 OTHER INSTRUMENTATION↗

NASA NTRS1991

Adaptive control of Space Station during nominal operations with CMGs

An adaptive control approach is investigated for the Space Station. The main components of the adaptive controller are the parameter identification scheme, the control gain calculation, and the control law. The control law is the Space Station baseline control law. The control gain calculation is based on linear quadratic regulator theory with eigenvalue placement in a vertical strip. The parameter identification scheme is a real-time recursive extended Kalman filter which estimates the inertias and also provides an estimate of the unmodeled disturbances due to the aerodynamic torques and to the nonlinear effects. An analysis of the inertia estimation problem suggests that it is possible to compute accurate estimates of the Space Station inertias during nominal CMG (control moment gyro) operations. The closed-loop adaptive control law is shown to be capable of stabilizing the Space Station after large inertia changes. Results are presented for the pitch axis.

Bishop, R. H.↗

NASA NTRS1992

Adaptive control of Space Station with control moment gyros

An adaptive approach to Space Station attitude control is investigated. The main components of the controller are the parameter identification scheme, the control gain calculation, and the control law. The control law is a full-state feedback space station baseline control law. The control gain calculation is based on linear-quadratic regulator theory with eigenvalues placement in a vertical strip. The parameter identification scheme is a recursive extended Kalman filter that estimates the inertias and also provides an estimate of the unmodeled disturbances due to the aerodynamic torques and to the nonlinear effects. An analysis of the inertia estimation problem suggests that it is possible to estimate Space Station inertias accurately during nominal control moment gyro operations. The closed-loop adaptive control law is shown to be capable of stabilizing the Space Station after large inertia changes. Results are presented for the pitch axis.

Bishop, Robert H.↗

NASA NTRS1957

On the Use of the Harmonic Linearizaiton Method in the Automatic Control Theory

The method of harmonic linearization (harmonic balance), first proposed by N. M. Krylov and N. N. Bogolyubov for the approximate investigation of nonlinear vibrations, has been developed and received wide practical application to problems in the theory of automatic control. Recently, some doubt has been expressed on the legitimacy of application of the method to these problems, and assertions were made on the absence in them of a small parameter of any kind. Nevertheless, the method gives practical, acceptable results and is a simple and powerful means in engineering computations. Hence, the importance of questions arises as to its justification. The underlying principle of the method is the replacement of the given nonlinear equation by a linear equation. In establishing the method, a small parameter is considered whose presence makes it possible to speak, with some degree of approximation, of the solution of this new equation to the solution of the given nonlinear equation. In an article by the author, certain considerations were given on the presence of the small parameter, but this question has not as yet received a final answer. In the present report, a somewhat different approach to the problem is applied that permits: (a) establishing, in the clearest manner, the form of the presence of the small parameter in nonlinear problems of control theory, solvable by the method of harmonic linearization; (b) connecting it with previous intuitive physical concepts (with the "filter property") and extending the class of problems possessing this property; and (c) discussing various generalizations of the method.

Popov, E. P.↗

NASA NTRS2015

Simulations of Turbulent Momentum and Scalar Transport in Non-Reacting Confined Swirling Coaxial Jets

This paper presents the numerical simulations of confined three-dimensional coaxial water jets. The objectives are to validate the newly proposed nonlinear turbulence models of momentum and scalar transport, and to evaluate the newly introduced scalar APDF and DWFDF equation along with its Eulerian implementation in the National Combustion Code (NCC). Simulations conducted include the steady RANS, the unsteady RANS (URANS), and the time-filtered Navier-Stokes (TFNS); both without and with invoking the APDF or DWFDF equation. When the APDF (ensemble averaged probability density function) or DWFDF (density weighted filtered density function) equation is invoked, the simulations are of a hybrid nature, i.e., the transport equations of energy and species are replaced by the APDF or DWFDF equation. Results of simulations are compared with the available experimental data. Some positive impacts of the nonlinear turbulence models and the Eulerian scalar APDF and DWFDF approach are observed.

combustors↗