Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Neutron Yield”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Asymptotic Giant Branch stars as a source of short-lived radioactive nuclei in the solar nebula

We carried out a theoretical evaluation of the contribution of Asymptotic Giant Branch (AGB) stars to some short-lived (10(exp 6) less than or equal to Tau-bar less than or equal to 2 x 10(exp 7) yr) isotopes in the Interstellar Medium (ISM) and in the early solar system using stellar model calculations for thermally pulsing evolutionary phases of low-mass stars. The yields of s-process nuclei in the convective He-shell for different neutron exposures tau(sub 0) were obtained, and AGB stars were shown to produce several radioactive nuclei (especially Pd-107, Pb-205, Fe-60, Zr-93, Tc-99, Cs-135, and Hf-182) in diferent amounts. Assuming either contamination of the solar nebula from a single AGB star or models for continuous injection and mixing from many stars into the ISM, we calculate the ratios of radioactive to stable nuclei at the epoch of the Sun's formation. The dilution factor between the AGB ejecta and the early solar system matter is obtained by matching the observed Pd-107/Pd-108 and depends on the value of tau(sub 0). It is found that small masses M(sub He) of He-shell material (10(exp -4)-10(exp -7) solar mass) enriched in s-process nuclei are sufficient to contaminate 1 solar mass of the ISM to produce the Pd-107 found in the early solar system. Predictions are made for all of the other radioactive isotopes. The optimal model to explain several observed radioactive species at different states of the proto-solar nebula involves a single AGB star with a low neutron exposure (tau(sub 0) = 0.03 mbarn(sup -1)) which contaminated the cloud with a dilution factor of M(sub He)/solar mass approximately 1.5 x 10(exp -4). This will also contribute newly synthesized stable s-process nuclei in the amount of approximately 10(exp -4) of their abundances already present in the proto-solar cloud. Variations in the degree of homogenization (approximately 30%) of the injected material may account for some of the small general isotopic anomalies found in meteorites. It is also found that Fe-60 is produced in small but significant quantities that may be sufficient to explain the observations if the time elapsed delta from the contamination of the ISM to the formation of protoplanetary bodies is not higher than delta = 5 x 10(exp 6) yr. If delta is longer, up to 10 x 10(exp 6) yr, this would require the single AGB star to experience enhanced neutron densities (n(sub n) approximately 3 x 10(exp 9)n/cu cm) in the s-processing zone in order to compensate for the branching at Fe-59. The alternative model of long-term continuous ejection of matter from many AGB stars does not appear to match the observations. We also estimate the Al-26 production from the H-shell and find that the Al-26 abundance in the early solar system may be readily explained in a self-consistent manner. Moreover, Al-26 from AGB stars may contribute substantially to the galactic Al-26 gamma-source, while no significant gamma-flux from Co-60 (deriving from Fe-60 decay) is to be expected.

Wasserburg, G. J.↗
NASA NTRS2018

Imaging X-ray Polarimetry Explorer Mission Overview and Systems Engineering Status

The Imaging X-ray Polarimetry Explorer (IXPE) is a space-based observatory that will have the capability to measure the polarization of X-rays from astrophysical sources. IXPE will improve sensitivity over OSO-8, the only previous X-ray polarimeter, by two orders of magnitude in required exposure time. IXPE will yield insight into our understanding of X-ray production in objects such as neutron stars as well as stellar and supermassive black holes. IXPE measurements will provide new dimensions for probing a wide range of cosmic X-ray sources-including active galactic nuclei (AGN) and microquasars, pulsars and pulsar wind nebulae, magnetars, accreting X-ray binaries, supernova remnants, and the Galactic center.

Houston, Janice↗
NASA NTRSDate not supplied

Nuclear Thermal Propulsion Material Trade for Additively Manufactured Regenerative Chambers

Nuclear thermal propulsion (NTP) is a game changing technology with advantages over chemical propulsion systems for deep space missions but comes with many engineering challenges. This paper focuses on the challenge of material selection for a regeneratively-cooled chamber for use in a nuclear environment with minimal design margins. Chemical compatibility with reactants and products following energy extraction (be it through combustion or neutron bombardment) must be considered. Similarly, mechanical and thermophysical properties (e.g., density, thermal conductivity, yield strength, etc.) as functions of temperature are critical. While hydrogen embrittlement environment (HEE) is a risk and consideration for traditional chemical combustion chambers, application in a nuclear thermal engine adds additional material compatibility and resilience requirements to long-term nuclear radiation exposure. Chamber materials in this trade included, but were not limited to, A-286, Haynes 230, Haynes 282, CRES 347, GRCop-42, GRCop-84, Inconel 625, JBK-75, and NASA HR-1. The material trade focuses on modern additive manufacturing techniques and hypothetical geometric constraints.

Nuclear Thermal Propulsion↗
NASA NTRSDate not supplied

Nuclear Thermal Propulsion Material Trade for Additively Manufactured Regenerative Chambers

Nuclear thermal propulsion (NTP) is a game changing technology with advantages over chemical propulsion systems for deep space missions but comes with many engineering challenges. This paper focuses on the challenge of material selection for a regeneratively-cooled chamber for use in a nuclear environment with minimal design margins. Chemical compatibility with reactants and products following energy extraction (be it through combustion or neutron bombardment) must be considered. Similarly, mechanical and thermophysical properties (e.g., density, thermal conductivity, yield strength, etc.) as functions of temperature are critical. While hydrogen embrittlement environment (HEE) is a risk and consideration for traditional chemical combustion chambers, application in a nuclear thermal engine adds additional material compatibility and resilience requirements to long-term nuclear radiation exposure. Chamber materials in this trade included, but were not limited to, A-286, Haynes 230, Haynes 282, CRES 347, GRCop-42, GRCop-84, Inconel 625, JBK-75, and NASA HR-1. The material trade focuses on modern additive manufacturing techniques and hypothetical geometric constraints.

Nuclear Thermal Propulsion↗
DOE OSTI2022

Alternative analysis of the MINERVE ZPR oscillation experiments

Delayed neutrons are of fundamental importance in the field of nuclear reactor dynamics and control. However, the precursor yield fraction for a given nuclear reactor are dependent on the properties of the reactor. Thus, in-pile experiments, such as oscillation experiments are conducted in order to measure those values. In this work, an alternative analysis of the piston oscillation experiments that have been conducted in the MINERVE reactor in 2013 is performed. A new method which evolves effective terms that cancel out undesired drifts of the flux during the experiments is presented. The evaluation of the uncertainty on the values of the response function is also presented. Moreover, the effective delayed neutron fraction β{sub eff} is evaluated and is compared to results in previous works. As the analysis has led to an estimation of β{sub eff} with a large uncertainty, it has been deduced that the oscillation experiments that have been conducted in MINERVE are not a reliable method of experimentation to determine the value of β{sub eff} in the reactor and that the noise experiments are better suited for that purpose.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2020

Determination of neutron irradiation temperatures of SiC using electrical resistivity method

The irradiation temperature of silicon carbide (SiC) was determined post-irradiation by examination of the recovery of the electrical resistivity due to thermal annealing in a rapid heating/cooling optical furnace. High-purity, high-resistivity grade SiC is routinely used as a passive temperature monitor in neutron irradiation studies at the High Flux Isotope Reactor (HFIR), and this paper presents an alternative automated technique for determination of the irradiation temperature the SiC experienced. Neutron collisions with the atoms results in displaced lattice atoms (interstitials) that act as electron donors yielding a significant decrease in electrical resistivity. The irradiation defects become thermodynamically unstable and start to recombine, when annealed above the irradiation temperature, resulting in a recovery of the electrical resistivity. The resistivity is measured at a fixed elevated temperature above ambient, which is below the target irradiation temperature. When the resistivity is plotted as a function of annealing temperatures, a clear increase is observed due to the recovery of irradiation defects. We have demonstrated that this electrical resistivity measurement of SiC is effective to determine irradiation temperature of SiC. In conclusion, energy levels of various defects in SiC were calculated from Arrhenius plots of electrical conductivity versus inverse temperature.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Fabrication of Black Body Grids by Thick Film Printing for Quantitative Neutron Imaging

Neutron imaging offers deep penetration through many high-Z materials while also having high sensitivity to certain low-Z isotopes such as 1H, 6Li, and 10B. This unique combination of properties has made neutron imaging an attractive tool for a wide range of material science and engineering applications. However, measurements made by neutron imaging or tomography are generally qualitative in nature due to the inability of detectors to discriminate between neutrons which have been transmitted through the sample and neutrons which are scattered by the sample or within the detector. Recent works have demonstrated that deploying a grid of small black bodies (BBs) in front of the sample can allow for the scattered neutrons to be measured at the BB locations and subsequently subtracted from the total measured intensity to yield a quantitative transmission measurement. While this method can be very effective, factors such as the scale and composition of the sample, the beam divergence, and the resolution and construction of the detector may require optimization of the grid design to remove all measurement biases within a given experimental setup. Therefore, it is desirable to have a method by which BB grids may be rapidly and inexpensively produced such that they can easily be tailored to specific applications. In this work, we present a method for fabricating BB patterns by thick film printing of Gd2O3 and evaluate the performance with variation in feature size and number of print layers with cold and thermal neutrons.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Pressure control of magnetic order and excitations in the pyrochlore antiferromagnet MgCr 2 ⁢O 4

MgCr 2 O 4 is one of the best-known realizations of the pyrochlore-lattice Heisenberg antiferromagnet. The strong antiferromagnetic exchange interactions are perturbed by small further-neighbor exchanges such that this compound may in principle realize a spiral spin liquid (SSL) phase in the zero-temperature limit. However, a spin Jahn-Teller transition below T N ≈ 13 K yields a complicated long-range magnetic order with multiple coexisting propagation vectors. We present neutron scattering and thermomagnetic measurements of MgCr 2 O 4 samples under applied hydrostatic pressure up to P = 1.7 GPa demonstrating the existence of multiple close-lying nearly degenerate magnetic ground states. We show that the application of hydrostatic pressure increases the ordering temperature by around 0.8 K per GPa and increases the bandwidth of the magnetic excitations by around 0.5 meV per GPa. We also evidence a strong tendency for the preferential occupation of a subset of magnetic domains under pressure. In particular, we show that the $k$ = (0,0,1) magnetic phase, which is almost negligible at ambient pressure, dramatically increases in spectral weight under pressure. This modifies the spectrum of magnetic excitations, which we interpret unambiguously as spin waves from multiple magnetic domains. Moreover, we report that the application of pressure reveals a feature in the magnetic susceptibility above the magnetostructural transition. We interpret this as the onset of a short-range ordered phase associated with $k$ = (0,0,1), previously not observed in magnetometry measurements.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Thermally induced mimicry of quantum cluster excitations and implications for the magnetic transition in FePSe 3

In two dimensional magnets, the interplay of thermal fluctuations and spin anisotropy control the existence of long-range magnetic order. In the van der Waals antiferromagnets FePX 3 , orbital degeneracy in the 𝑡 2⁢𝑔 levels of the Fe 2+ ions in octahedral coordination yields strong uniaxial anisotropy, which stabilizes magnetic order up to 𝑇 ≈ 100 K. Recent inelastic neutron scattering measurements around the magnetic ordering transition have shown the existence of a broad spectrum of magnetic fluctuations with nontrivial momentum dependence, which has been interpreted as evidence for localized entangled cluster excitations. In this paper, we offer an alternative interpretation using classical nonlinear spin dynamics simulations. We present stochastic Landau Lifshitz dynamics simulations that reproduce the neutron scattering measurements of Chen et al. [npj Quantum Mater. 9, 40 (2024)] on FePSe 3 . These calculations faithfully explain the dynamical structure factor's momentum and energy dependence and point to a classical origin for the excitations observed in neutron spectroscopy and that the order-disorder transition can be understood in terms of thermal fluctuations overcoming the anisotropy energy.

Landau-Lifschitz-Gilbert equation↗
NASA NTRS1985

Calculation of improved spallation cross sections

Several research groups have recently carried out highly precise measurements (to about 10 percent) of high-energy nuclear spallation cross sections. These measurements, above 5 GeV, cover a broad range of elements: V, Fe, Cu, Ag, Ta and Au. Even the small cross sections far off the peak of the isotopic distribution curves have been measured. The semiempirical calculations are compared with the measured values. Preliminary comparisons indicate that the parameters of our spallation relations (Silberberg and Tsao, 1973) for atomic numbers 20 to 83 need modifications, e.g. a reduced slope of the mass yield distribution, broader isotopic distributions, and a shift of the isotopic distribution toward the neutron-deficient side. The required modifications are negligible near Fe and Cu, but increase with increasing target mass.

Tsao, C. H.↗
DOE OSTI2023

The extended ‘stellar halo’ of the Ursa Minor dwarf galaxy

Stellar candidates in the Ursa Minor (UMi) dwarf galaxy have been found using a new Bayesian algorithm applied to Gaia EDR3 data. Five of these targets are located in the extreme outskirts of UMi, from ∼5 to 12 elliptical half-light radii (r h ), where r h (UMi) = 17.32 ± 0.11 arcmin, and have been observed with the high-resolution Gemini Remote Access to CFHT ESPaDOnS Spectrograph at the Gemini North telescope. Precise radial velocities (σ RV < 2 km s −1 ) and metallicities (σ [Fe/H] < 0.2 dex) confirm their memberships of UMi. Detailed analysis of the brightest and outermost star (Target 1, at ∼12r h ), yields precision chemical abundances for the α (Mg, Ca, and Ti), odd-Z (Na, K, and Sc), Fe-peak (Fe, Ni, and Cr), and neutron-capture (Ba) elements. With data from the literature and APOGEE data release 17, we find the chemical patterns in UMi are consistent with an outside-in star-formation history that includes yields from core-collapse supernovae, asymptotic giant branch stars, and Type Ia supernovae. Evidence for a knee in the [α/Fe] ratios near [Fe/H] ∼ −2.1 indicates a low star-formation efficiency similar to that in other dwarf galaxies. Detailed analysis of the surface number density profile shows evidence that UMi’s outskirts have been populated by tidal effects, likely as a result of completing multiple orbits around the Galaxy.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Thermonuclear performance variability near ignition at the National Ignition Facility

We describe our current understanding of the variability and degradation mechanisms observed through a series of five indirectly driven inertial fusion implosions fielded at the National Ignition Facility in the fall of 2021, four of which attempted to reproduce the first experiment to achieve Lawson's criterion for ignition with a thermonuclear yield of 1.35 MJ on August 8, 2021. A large number of absolutely calibrated (imaging, time-resolved, and spectrally resolved) x-ray and neutron diagnostics are fielded on the NIF along multiple lines of sight for each experiment. This allows for a reconstruction of the DT fuel and ablator mix injected into the hotspot around peak burn. We show that nuclear yield variations are well reproduced by numerical modeling when the measured low mode asymmetries and mix mass are included. Furthermore, these observed perturbations during burn are linked to small variations in laser delivery and capsule defects. Stringent specifications are then set to achieve robust ignition with the implosion design studied in this paper.

Divol, L. (ORCID:0000000269699898)↗
DOE OSTI2026

Exploring composition mixing in kilonova ejecta with ray-by-ray simulations

Binary neutron star merger (BNSM) ejecta are considered a primary repository of r-process nucleosynthesis and a source of the observed heavy-element abundances. We implement composition mixing into ray-by-ray radiation-hydrodynamic simulations of BNSM ejecta, coupled with an online nuclear network (NN). We model mixing via a gradient-based mixing approximation that evolves simultaneously with the hydrodynamics. Here, we find that mixing occurs in regions where the electron fraction changes rapidly. While mixing smooths composition gradients in transition regions, it has a negligible impact on the heavy-element yields. This is because the primary r-process site (the equatorial ejecta) is initially homogeneous in free neutrons, leaving no strong gradients for mixing to act upon. In each angular ray, the abundances of the most produced elements are robust under mixing, while the less abundant ones are more affected. The total global abundances change only slightly from mixing, since each angular ray contributes its most abundant elements. Furthermore, the predicted kilonova light curves show only minor reddening, with differences below the detectability of state-of-the-art telescopes. In general, we do not observe significant effects from mixing in the time span of the r-process. Consequently, mixing only leads to minor variations in abundances and light curves in ray-by-ray simulations.

Explosive burning↗
DOE OSTI2022

Compensating cylindrical Hohlraum mode 4 asymmetry via capsule thickness tailoring and effects on implosions

We report previously, hydrodynamic simulations suggested that precisely tailoring the capsule ablator thickness (shimming) could counterbalance cylindrical Hohlraum Legendre P 4 drive asymmetries at the capsule in laser indirect drive implosions. As a result, the stagnated deuterium–tritium (DT) fuel areal density P 4 asymmetry is reduced, potentially resulting in a nuclear yield increase. Inflight radiographs of various level of shimmed capsules with plastic (CH) ablators showed that shims can indeed control the in-flight capsule shell P 4 asymmetry, with a linear sensitivity to shim amplitude that is close to analytic estimates and simulations. Furthermore, the stagnated DT fuel areal density P 4 asymmetry inferred from downscattered neutron imaging was reduced when the capsule shim was applied, in agreement with simulations matching the inflight shell asymmetry. A nuclear yield improvement via shim was not observed, as predicted, likely due to implosion instabilities and as built capsule shim deviations from an ideal P 4 shape.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

A Fast Reactor Irradiation Experiment Design in the ATR

Modern modeling techniques were used to investigate a proposed method for fast neutron irradiations in an existing thermal-spectrum reactor, the Advanced Test Reactor (ATR). This method builds upon pre-existing ideas, where fast flux is increased by surrounding the specimens with fissionable “booster fuel” but diverges from historical approaches by using an already developed fuel element design used in the Belgian Reactor 2 (BR2) as the booster fuel while leveraging modern 3-D modeling and simulation techniques. Design evaluations and neutronics simulations were performed to evaluate the performance of a BR2 fuel element irradiated in an ATR flux trap with test pins in the central channel of the BR2 fuel element. These efforts have yielded promising results. Adding a BR2 fuel element in the northeast (NE) flux trap of ATR was predicted to result in a 150% increase to the incident fast neutron flux with a fast (>0.1 MeV) to thermal (<0.625 eV) neutron flux ratio ranging from approximately 50 to 150, dependent on the material used for thermal neutron filtering and volume of moderator within the central channel of the BR2 element. The predicted annual fast neutron fluence (>0.1 MeV) ranges from 7.9 × 1021 to 9.1 × 1021 n/cm2. Given the relatively large fast to thermal neutron flux ratio, the calculated radial power profiles within 4.3 mm outer diameter U10Zr fueled specimens irradiated within the BR2 booster fuel element are adequate representations of those within fast neutron reactors. The predicted radial power profiles are not flat, but they are more prototypic than those seen in advanced fuels tests which began in ATR in 2003. Another distinct advantage of this experiment design is that full-scale test pins can be irradiated to augment the ongoing series of reduced scale advanced fuels tests. The proposed experiment design irradiated within a BR2 fuel element in a flux trap of ATR offers an improved alternative to the current testing of advanced reactor fuels in ATR. Selected results from this design evaluation are presented.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Impact of T - and ρ -dependent decay rates and new (n, γ ) cross-sections on the s process in low-mass asymptotic giant branch stars

Aims. We study the impact of nuclear input related to weak-decay rates and neutron-capture reactions on predictions for the slow neutron-capture process (s process) in asymptotic giant branch (AGB) stars. We provide the first database of surface abundances and stellar yields of the isotopes heavier than iron from the Monash models. Methods. We ran nucleosynthesis calculations with the Monash post-processing code for seven stellar structure evolution models of low-mass AGB stars with three different sets of nuclear inputs. The reference set has constant decay rates and represents the set used in the previous Monash publications. The second set contains the temperature and density dependence of β decays and electron captures based on the default rates of nuclear NETwork GENerator (NETGEN). In the third set, we further update 92 neutron-capture rates based on re-evaluated experimental cross sections from the ASTrophysical Rate and rAw data Library. We compare and discuss the predictions of the sets relative to each other in terms of isotopic surface abundances and total stellar yields. We also compare the results to isotopic ratios measured in presolar stardust silicon carbide (SiC) grains from AGB stars. Results. The new sets of models result in a ∼66% solar s-process contribution to the p-nucleus 152 Gd, confirming that this isotope is predominantly made by the s process. The nuclear input updates result in predictions for the 80 Kr/ 82 Kr ratio in the He intershell and surface 64 Ni/ 58 Ni, 94 Mo/ 96 Mo, and 137 Ba/ 136 Ba ratios that are more consistent with the corresponding ratios measured in stardust; however, the new predicted 138 Ba/ 136 Ba ratios are higher than the typical values of the SiC grains. The W isotopic anomalies are in agreement with data from the analyses of other meteoritic inclusions. We confirm that the production of 176 Lu and 205 Pb is affected by too large uncertainties in their decay rates from NETGEN.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Visualization of Solid-State Synthesis for Chalcogenide Na Superionic Conductors by in-situ Neutron Diffraction

Chalcogenide superionic sodium (Na) conductors are great potential as solid electrolytes (SEs) in all-solid-state Na batteries with advantages of high energy density and safety, and cost effectiveness. For solid Na-ion conductors, their crystal structures and ionically conductive properties are strongly influenced by the synthetic approaches and processing parameters. Thus, understanding the synthesis process is essential to control the structures and phases and thereby yields to Na-ion conductors with desirable properties. Thanks to the high-flux and deep-penetrating time-of-flight neutron diffraction (ND), we employed in situ experiments to track real-time structural changes of two chalcogenide SEs (Na 3 SbS 4 and Na 3 SbS 3.5 Se 0.5 ) during the solid-state synthesis. For these two conductors, the ND results reveal a fast one-step reaction for the synthesis and the molten process when heating up, and the recrystallization as well as the cubic-to-tetragonal phase transition up on cooling. Moreover, Se-doping is found to influence the reaction temperatures, lattice parameter and structure stability based on neutron experimental observations and theoretical simulation. This work presents a detailed structural study using in situ neutron diffraction technology for the solid synthesis process of chalcogenide Na-ion conductors, beneficial for the design and synthesis of new solid-state conductors.

25 ENERGY STORAGE↗
DOE OSTI2020

Primary fission fragment mass yields across the chart of nuclides

In this work, we have calculated a complete set of primary fission fragment mass yields, Y(A), for heavy nuclei across the chart of nuclides, including those of particular relevance to the rapid neutron capture process (r process) of nucleosynthesis. We assume that the nuclear shape dynamics are strongly damped, which allows for a description of the fission process via Brownian shape motion across nuclear potential-energy surfaces. The macroscopic energy of the potential was obtained with the Finite-Range Liquid-Drop Model (FRLDM), while the microscopic terms were extracted from the single-particle level spectra in the fissioning system by the Strutinsky procedure for the shell energies and the BCS treatment for the pairing energies. For each nucleus considered, the fission fragment mass yield, Y(A), is obtained from 50 000 to 500 000 random walks on the appropriate potential-energy surface. The full mass and charge yield, Y(Z,A), is then calculated by invoking the Wahl systematics. With this method, we have calculated a comprehensive set of fission-fragment yields from over 3800 nuclides bounded by 80 ≤ Z ≤ 130 and A ≤ 330; these yields are provided as an ASCII formatted database in the Supplemental Material. We compare our yields to known data and discuss general trends that emerge in low-energy fission yields across the chart of nuclides.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗