Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Nanomaterial”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Remote Floating-Gate Field-Effect Transistor with 2-Dimensional Reduced Graphene Oxide Sensing Layer for Reliable Detection of SARS-CoV-2 Spike Proteins

Despite intensive research of nanomaterials-based field-effect transistors (FETs) as a rapid diagnostic tool, it remains to be seen for FET sensors to be used for clinical applications due to a lack of stability, reliability, reproducibility, and scalability for mass production. In this work, we propose a remote floating-gate (RFG) FET configuration to eliminate device-to-device variations of two-dimensional reduced graphene oxide (rGO) sensing surfaces and most of the instability at the solution interface. Also, critical mechanistic factors behind the electrochemical instability of rGO such as severe drift and hysteresis were identified through extensive studies on rGO–solution interfaces varied by rGO thickness, coverage, and reduction temperature. rGO surfaces in our RFGFET structure displayed a Nernstian response of 54 mV/pH (from pH 2 to 11) with a 90% yield (9 samples out of total 10), coefficient of variation (CV) < 3%, and a low drift rate of 2%, all of which were calculated from the absolute measurement values. As proof-of-concept, we demonstrated highly reliable, reproducible, and label-free detection of spike proteins of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) in a saliva-relevant media with concentrations ranging from 500 fg/mL to 5 μg/mL, with an R 2 value of 0.984 and CV < 3%, and a guaranteed limit of detection at a few pg/mL. Taken together, this new platform may have an immense effect on positioning FET bioelectronics in a clinical setting for detecting SARS-CoV-2.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Ultrastable Gold Nanostars via Bottlebrush-like Block Copolymers

Gold (Au) nanostars are plasmonic nanostructures possessing potentials for small molecule detection, photocatalytic activities, and photothermal therapy. However, Au nanostars synthesized in the traditional way are often plagued by poor photo, thermal, and chemical stabilities. Here, we report an unconventional route to the synthesis of ultrastable colloidal Au nanostars enabled by bottlebrush-like block copolymers (BBCPs), dispensing with the need for Au seeds. Crafting of Au nanostars using BBCPs is rendered by bridging the latter with Au 3+ ions as cross-linkers that have multiple coordination sites. Notably, the presence of a covalently tethered polymer shell on the surface of Au nanostars (i.e., polymer-ligated Au nanostars) imparts remarkably high stability under high temperature and laser excitation over conventional cetyltrimethylammonium bromide (CTAB)-mediated Au nanostars. Due to enhanced laser stability, plasmonic fields near Au nanostars can be visualized under high laser fluence by ultrafast electron microscopy (UEM) without morphological degradation. Notably, the presence of insulating polystyrene chains does not compromise the plasmonic field distribution, with the highest field intensity observed along the star arms. In conclusion, the greatly improved long-term photo, thermal, and chemical stabilities make Au nanostars a prospective noble metal nanomaterial for a range of sensing applications.

Cellulose↗
DOE OSTI2025

Nacre-like MXene/Polyacrylic Acid Layer-by-Layer Multilayers as Hydrogen Gas Barriers

MXenes are a promising class of 2D nanomaterials and are of particular interest for gas barrier applications due to their high aspect ratio. However, MXene nanosheets naturally bear a negative charge, which prevents assembly with negatively charged polymers, such as polyacrylic acid (PAA), into gas barrier coatings. Here, we present MXene- and PAA-based layer-by-layer (MXene/ PAA LbL) multilayers formed by leveraging hydrogen bonding interactions. When assembled in acidic conditions, MXene/PAA LbL multilayers exhibit conformal, pinhole-free, nacre-like structures. The MXene/PAA LbL multilayers yield high blocking capability and low permeability (0.14 ± 0.01 cc·mm·m −2 ·day −1 · MPa −1 ) for hydrogen gas which is over 9000 times lower than uncoated niobium (Nb) substrate. These nacre-like structures are also electronically conductive (σ DC , up to 370 ± 30 S cm −1 ). Because these multilayers utilize hydrogen bonding, their properties are highly sensitive to the pH of the assembly and its external environment. Specifically, the reversible deconstruction of these multilayers under basic conditions is experimentally verified. This study shows that hydrogen bonding interactions can be leveraged to form MXene LbL multilayers as gas barriers, electronically conductive coatings, and deconstructable thin films via pH control.

36 MATERIALS SCIENCE↗
DOE OSTI2025

From Structure to Function: Zn/Mn-Modified Maghemite as an Advanced Nanoplatform for Magnetic Hyperthermia and Radionuclide Therapy

The development of nanoplatforms capable of efficient heat generation and stable radionuclide delivery is essential for effective bimodal cancer therapy. Here, in this study, binary (Fe–M) and ternary (Fe–M–M′) metal oxide nanoparticles were synthesized via a polyol method optimized to produce flower-like γ-Fe 2 O 3 (maghemite) structures, with M and M′ representing Zn and/or Mn. Comprehensive structural and magnetic characterization was conducted to explain the relationship between composition, defect structure, and hyperthermic performance. The analyses revealed that cation substitution induced an Fe-site vacancy, primarily at octahedral positions, leading to local structural distortions, as confirmed by powder X-ray diffraction and pair distribution function analysis. The optimized composition, with Zn/Mn/Fe = 0.040:0.182:1, exhibited the highest concentration of vacancies and structural disorder. These vacancies altered the bonding environment, enhancing magnetic interactions at tetrahedral sites while weakening those at the octahedral positions. The resulting multicore nanoflowers (20–63 nm; core size 13–18 nm) displayed strong heating performance, with intrinsic loss power ranging from 0.34 to 5.77 nHm 2 kg –1 . The optimized sample achieved a temperature increase of 30 °C within 2 min and a specific absorption rate of 369 W g –1 . This composition was further coated with citrate (CA) and successfully radiolabeled with 177 Lu, achieving a radiolabeling yield of 92.7% and excellent stability, thus forming a robust nanoplatform for combined magnetic hyperthermia and radionuclide therapy. Biological evaluation of the optimized S5 composition revealed selective cytotoxicity toward HeLa and LS174 cells, while toxicity was significantly lower to A549, A375, and normal MRC-5 cells. Citrate coating of S5 nanoparticles (S5@CA) drastically reduced their cytotoxicity across all tested cell lines (IC 50 > 200 μg mL –1 ), confirming their enhanced biocompatibility for therapeutic applications. In HeLa cells subjected to magnetic hyperthermia, the viability decreased to approximately 84% after 30 min and 61% after 60 min of treatment, demonstrating the sustained hyperthermic effect at a controlled working temperature of 48 °C. These results underscore the effectiveness of cation substitution and vacancy engineering in tailoring the functional properties of maghemite-based nanomaterials for advanced multimodal cancer therapies.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Nanodiamonds in Advancing Biomedical Sciences

Nanodiamonds (NDs), tetrahedral carbon frameworks with size ranging from 1 to 100 nanometers, have gained growing attention in recent years due to their distinct optical, thermal, and mechanical properties compared to other carbon nanomaterials (e.g., graphene, carbon nanotubes, carbon dots). Combined with a high surface-to-volume ratio and tunable and chemically versatile surfaces, these support broad applications across catalysis, electronics, and life sciences. Moreover, the biocompatible characteristics of NDs enable their controllable interfacial interactions with biological systems, positioning them as excellent candidates for advancing cutting-edge biomedical sciences, particularly through the engineering of efficient material-biointerfaces that facilitate optimal interactions with biological systems. Among various forms of NDs, fluorescent nanodiamonds (FNDs) have emerged as some of the most impactful and rapidly advancing materials, demonstrating strong potential in ultrasensitive spin-enhanced bioimaging, high-precision biosensing, traceable drug delivery, and quantum-enabled biomedical technologies. This Perspective introduces the key principles underlying NDs and FNDs, including their structural properties, synthesis methods, and surface functionalization strategies. It also highlights emerging biomedical applications of NDs and FNDs, with particular emphasis on neurological disorders. Last, the article discusses current challenges in advancing NDs as a multifunctional platform for neural therapies with translational potential toward clinical trials.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Post-Modification of Crystalline Peptoid Nanomembranes with Active Nanoparticles for Efficient Photooxidation of a Mustard Gas Simulant

Peptoids (or poly-N-substituted glycines) hold immense potential for assembling into hierarchically structured functional materials via controlled molecular interactions. To create self-assembled materials with tailored functionalities, peptoid sequences are often conjugated with reactive or recognition motifs to enable applications including specific binding, biomimetic catalysis, and fluorescence imaging. However, the direct integration of bulky functional motifs into peptoid sequences can disrupt assembly processes and structural outcomes. Herein, we present a post-modification strategy for functionalizing pre-formed 2D crystalline assemblies. Through introducing clickable active sites, such as azide, alkyne, or thiol groups into a peptoid sequence, site-specific conjugation is achieved post-assembly via efficient “click”-type reactions. This strategy enables the ordered alignment of functional groups and gold nanoparticles (Au NPs) on the surface of 2D peptoid nanomaterials with controlled density, while preserving their high crystallinity and structural integrity. Furthermore, we demonstrated that nanomembranes functionalized with both Au NPs and porphyrins enhance the efficiency and selectivity of the photooxidation of 2-chloroethyl ethyl sulfide, a simulant of sulfur mustard. This innovative strategy lays the groundwork for advancing peptoid-based functional materials across diverse applications, from catalysis to biomedicine.

Chemistry↗
DOE OSTI2020

Role of Capping Agents in the Synthesis of Salicylate-Capped Zinc Oxide Nanoparticles

Capping agents are often used for controlling the size, aggregation, and properties of nanoparticles. To guide the design of improved nanomaterials for targeted performance, one can use mechanistic insights into the interactions between capping agents and nanoparticles. Here, we employ density functional theory (DFT), reactive force-field molecular dynamics (ReaxFF MD) simulations, and optical spectroscopy to study the interactions between salicylate, as a model capping agent, and zinc oxide (ZnO) nanoparticles. In this work, we find that salicylate strongly interacts with the nanoparticle via the formation of O–Zn bonds in a distorted six-membered coordination ring structure. We describe the mechanisms of capping of ZnO nanoparticles by salicylate via three different binding modes. Simulations indicate that salicylate undergoes dissociative adsorption at the highly active surface Zn sites via a hydrogen-transfer process, thereby forming a tridentate configuration. The water-mediated interaction also facilitates the dissociative adsorption, leading to two salicylate O atoms coordinating with a surface Zn atom, while the other salicylate O atom bonds with another surface Zn atom. For molecular adsorption, binding free energies indicate that salicylate binds more strongly to ZnO, often in a bidentate configuration, than water does. The formation of the salicylate–ZnO complex is substantiated by UV–visible and Fourier transform infrared spectra. We find that the C=O stretching mode of salicylate becomes softened when it interacts with the nanoparticle, suggesting chemisorption of salicylate on ZnO. Although DFT predicts strong interaction between salicylate and ZnO, ReaxFF MD simulation indicates the moderate interaction between these two components in aqueous solution. Water molecules in close contact with the nanoparticle surface undergo dissociation, thus resulting in a surface hydroxyl, a reactive oxygen species that may influence the nanoparticle’s catalytic properties. Overall, the atomic-level information provided here can guide the selection process of salicylate as an appropriate agent for ZnO nanoparticle synthesis when strong interactions of particles with capping agents are required.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Nanoporous Co/Mn-Mixed Metal Oxides Templated via Polysulfones for Amine Oxidation

Herein, we report syntheses of microporous and mesoporous mixed metal oxides templated via an anionic surfactant. The effects of acid treatment, solvent type, and the amount of metal incorporation were investigated. Two different cobalt–manganese oxide spinels that were synthesized with surface areas as high as 137 m 2 /g were obtained. These nanomaterials indicate 3.8 nm monomodal pore sizes with crystallite sizes of 2.4–3.6 nm. 59 Co MASNMR studies have shown that quadrupole coupling values from 1500 to 5000 kHz with asymmetry values ranging from 0.1 to 1 have been used to identify cobalt oxidation states. Amine oxidation was used as a model reaction, which allowed for imide yields of above 90% from benzylamine homocoupling. Finally, the use of these nanoporous oxides allows for a high-yielding homocoupling of benzylamine.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Selected Area Deposition of PtC x Nanostructures: Implications for Functional Coatings of 3D Nanoarchitectures

Here, we report that selected area deposition of 3D nanostructures is induced via a pyrolytic laser chemical vapor deposition (CVD) process where selected area heating results from the unique photothermal transport regime that is intrinsic to 3D nanostructures. PtC x composite nanostructures were deposited by focused electron beam-induced deposition (FEBID) and used as 3D templates. Subsequent simultaneous localized delivery of an organometallic PtC x precursor and pulsed 915 nm laser irradiation to the pre-defined nanostructures results in selected area deposition on the FEBID features. Results indicate the ability to initiate the process on sub-diffraction-limit nanoscale features. To elucidate the mechanisms that are operative in the selected area deposition, we analyze the effects of the laser repetition rate, power, and pulse duration. Thermal simulations corroborate that the pseudo-1D thermal transport of the nanostructure geometry coupled with the optical and thermal properties of the nanostructure governs the CVD reaction. The results demonstrated here suggest that controlling the thermal transport in nanomaterial architectures could be a useful means to spatially control localized photothermally stimulated chemical reactions and induce selected area reactions.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Highly Active Carbon–Platinum-Based Nanozymes: Synthesis, Characterization, and Immunoassay Application

Nanozymes (nanomaterials with intrinsic enzyme-like characteristics) have gained much attention for diagnostics and therapy due to their excellent enzyme-mimicking capability, great stability in environments, and facile and low-cost production. However, developing nanozymes with a high catalytic constant, K cat , has been challenging. Herein, we report a class of nanozyme-mimicking peroxidases, which are formed by depositing ultrasmall platinum nanoparticles (Pt NPs) 1–2 nm in size on the surface of hydrophilic nitrogen-doped carbon nanoparticles (CN NPs). These nanozymes defined as CN-Pt NPs show a high peroxidase-like activity with K cat values of 1.27 M·mL/s·g for 3,3,5,5′-tetramethylbenzidine (TMB) and 1.97 M·mL/s·g for hydrogen peroxide (H 2 O 2 ), respectively, which are at least one or two orders higher than many other reported carbon–noble metal-based nanozymes. Our developed CN-Pt NPs were further utilized in a colorimetric immunoassay as signal amplifiers for the biomarker detection of Burkholderia pseudomallei, a Gram-negative bacterial pathogen classified as a tier 1 select agent by the US CDC. In conclusion, the assay achieved lower limits of detection of 0.11 ng/mL in phosphate-buffered saline (PBS) and 0.16 ng/mL in human serum, when compared to many other assays in detecting the same biomarker.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Multilayer Chitin–Chitosan–Cellulose Barrier Coatings on Poly(ethylene terephthalate)

Currently, effective barrier properties over a wide range of humidity are achieved by layering multiple plastics, resulting in structures that are nearly impossible to recycle through current systems. There is strong interest in developing barriers that are recyclable, biodegradable, or compostable. Chitin and cellulose nanomaterials are promising alternatives because of their high crystallinity, renewable sourcing, strong electrostatic interactions, and potential for biodegradation or composting. In this paper, we explore the potential to create multilayer materials with effective oxygen and water vapor barrier properties at elevated humidity by combining recyclable poly(ethylene terephthalate) (PET) films with single-layer and bilayer coatings of chitin nanowhiskers (ChNWs), chitosan (CS), and cellulose nanocrystals (CNCs). The addition of CS to the ChNW suspension improved the gas barrier properties of ChNW coatings, likely by filling voids, and short ChNWs (SChNW, 114 nm) performed better than long ChNWs (LChNW, 230 nm). At the optimal mass ratio of 1:1 SChNW/CS, the oxygen permeability (OP) of SChNW/CS-coated PET films was 5.1 cm 3 μm m –2 day –1 kPa –1 versus 15.9 cm 3 μm m –2 day –1 kPa –1 for neat PET. To take advantage of electrostatic attraction and hydrogen bonding, CNC was first coated on the PET, followed by coating with ChNW/CS, resulting in an OP as low as 3.6 cm 3 μm m –2 day –1 kPa –1 at 50% relative humidity (RH), and 6.4 cm 3 μm m –2 day –1 kPa –1 at 80% RH. Furthermore, after thermal treatment (120 °C, 2.5 h), the OP dropped to 2.2 cm 3 μm m –2 day –1 kPa –1 (50% RH) and 4.8 cm 3 μm m –2 day –1 kPa –1 (80% RH). The ChNW/CS and CNC coating can be efficiently removed with alkali treatment enabling possible recycling of the coated PET films.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

In Vitro and in Vivo Analyses of the Effects of Source, Length, and Charge on the Cytotoxicity and Immunocompatibility of Cellulose Nanocrystals

Cellulose nanocrystals (CNCs) are an emergent, sustainable nanomaterial which are bio-sourced, abundant, and biodegradable. On account of their high aspect ratio, low density, and mechanical rigidity, they have been employed in numerous areas of biomedical research including as reinforcing materials for bone or tissue scaffolds or as carriers in drug delivery systems. Given the promise of these materials for such use, characterizing and understanding their interactions with biological systems is an important step to prevent toxicity or inflammation. Reported herein are studies aimed at exploring the in-vitro and in-vivo effects that source, length, and charge of the CNCs have on cytotoxicity and immune response. In this study, CNCs from four different biosources (cotton, wood, Miscanthus x. Giganteus, and sea tunicate) were prepared and functionalized with positive or negative charges to obtain a small library of CNCs with a range of dimensions and surface charge. A method to remove endotoxic or other impurities on the CNC surface leftover from the isolation process was developed, and the biocompatibility of the CNCs was subsequently assayed in-vitro and in-vivo. After subcutaneous injection, it was found that unfunctionalized (uncharged) CNCs form aggregates at the site of injection, inducing splenomegaly and neutrophil infiltration, while charged CNCs having surface carboxylates, sulfate half-esters, or primary amines were biologically inert. No effect of particle source or length was observed in the in-vitro and in-vivo studies conducted. The lack of in-vitro or in-vivo immune response toward charged CNCs in these experiments supports their use in future biological studies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Superlattices are Greener on the Other Side: How Light Transforms Self-Assembled Mixed Halide Perovskite Nanocrystals

Perovskite nanocrystal superlattices (NC SLs) are the nearest real-world approximations to monodisperse NC ensembles. NC SLs thus represent ideal model systems for evaluating the optical and structural stability of CsPb(I 1– x Br x ) 3 NCs at a macroscopic level. Here, photoinduced changes to CsPb(I 1– x Br x ) 3 NC SLs (0 < x < 1.0) are probed via in situ photoluminescence, X-ray diffraction, and electron microscopy. We find that prolonged (~10–20 h) ultraviolet–visible irradiation causes irreversible PL blueshifts, photobrightening, and crystal structure contractions. These changes stem from gradual photoinduced I 2 sublimation, which transforms CsPb(I 1– x Br x ) 3 into CsPbBr 3 . Despite eliminating half of the initial halides from individual CsPb(I 0.53 Br 0.47 ) 3 particles, NCs within SLs remarkably preserve their initial crystallinity, cuboidal shapes, edge lengths, and size distributions. This work illustrates compositional control toward generating precisely engineered perovskite NC SLs. It also highlights iodide photo-oxidation as a hurdle that must be overcome if mixed halide perovskite nanomaterials are to be applied beyond fundamental studies.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Addressing the Stability Gap in Photoelectrochemistry: Molybdenum Disulfide Protective Catalysts for Tandem III–V Unassisted Solar Water Splitting

While photoelectrochemical (PEC) solar-to-hydrogen efficiencies have greatly improved over the past few decades, advances in PEC durability have lagged behind. Corrosion of semiconductor photoabsorbers in the aqueous conditions needed for water splitting is a major challenge that limits device stability. In addition, a precious-metal catalyst is often required to efficiently promote water splitting. In this work, we demonstrate unassisted water splitting using a nonprecious metal molybdenum disulfide nanomaterial catalytic protection layer paired with a GaInAsP/GaAs tandem device. This device was able to achieve stable unassisted water splitting for nearly 12 h, while a sibling sample with a PtRu catalyst was only stable for 2 h, highlighting the advantage of the nonprecious metal catalyst. In situ optical imaging illustrates the progression of macroscopic degradation that causes device failure. Furthermore, this work compares unassisted water splitting devices across the field in terms of the efficiency and stability, illustrating the need for improved stability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Colloidal Quantum Shells: An Emerging 2D Semiconductor for Energy Applications

Low-dimensional semiconductors hold strong promise for future energy applications. These nanomaterials are inexpensive to process and offer a broad spectrum of attractive quantum-mechanical properties. The notorious problem of low-dimensional nanostructures, however, lies in their limited performance under high energetic loads, when more than one exciton per particle is created. Multiple excitons undergo fast annihilation, causing efficiently roll-off in energy-intensive applications, including high-brightness LEDs, X-ray scintillators, and solar cells. In this prospective, we will highlight an emerging type of low-dimensional semiconductors that allows avoiding such multi-exciton (MX) energy losses. Recently demonstrated colloidal quantum shells benefit from the spatial separation of multiple excitons, which leads to extraordinary improvements to MX lifetimes and MX quantum yield. This makes quantum shell morphology an attractive candidate for solution-processed optical and electrical devices. In this Focus Review, we compare the optoelectronic properties of quantum shells against other low-dimensional semiconductors and discuss their emerging opportunities in solid-state lighting and energy-harvesting applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Simultaneous Observation of Carrier-Specific Redistribution and Coherent Lattice Dynamics in 2H-MoTe 2 with Femtosecond Core-Level Spectroscopy

In this study, we employ few-femtosecond extreme ultraviolet (XUV) transient absorption spectroscopy to reveal simultaneously the intra- and interband carrier relaxation and the light-induced structural dynamics in nanoscale thin films of layered 2H-MoTe 2 semiconductor. By interrogating the valence electronic structure via localized Te 4 d (39-46 eV) and Mo 4 p (35-38 eV) core levels, the relaxation of the photoexcited hole distribution is directly observed in real time. We obtain hole thermalization and cooling times of 15 ± 5 fs and 380 ± 90 fs, respectively, and an electron-hole recombination time of 1.5 ± 0.1 ps. Furthermore, excitations of coherent out-of-plane A 1g (5.1 THz) and in-plane E 1g (3.7 THz) lattice vibrations are visualized through oscillations in the XUV absorption spectra. By comparison to Bethe-Salpeter equation simulations, the spectral changes are mapped to real-space excited-state displacements of the lattice along the dominant A 1g coordinate. By directly and simultaneously probing the excited carrier distribution dynamics and accompanying femtosecond lattice displacement in 2H-MoTe 2 within a single experiment, our work provides a benchmark for understanding the interplay between electronic and structural dynamics in photoexcited nanomaterials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗